Hey there people!
I just got a HTC Sensation, which is currently bricked on 3.33.401.53, S-ON, unlocked bootloader and a CID = Y13.
I can't find anywhere on the internet, even on paying sites, the correct RUU to restore it, and I can't use any RUU because it's CID-locked and S-ON...
I can flash a custom recovery (I tried TWRP), but of course I can't flash any custom ROM because the phone is S-ON.
Is there any way I can save it, or am I left with a somehow expensive paperweight?
Below is the full result of a fastboot getvar all:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.27.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.33.401.53
(bootloader) serialno: SH164V804387
(bootloader) imei: 356440045391883
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813000
(bootloader) cidnum: HTC__Y13
(bootloader) battery-status: good
(bootloader) battery-voltage: 3736mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 617f0a98
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Thanks in advance for any help!
Spigaw said:
I tried TWRP
Click to expand...
Click to collapse
If you are using TWRP you need to flash the boot.img from your PC
4EXT Recovery allows you to flash the boot.img without a PC
Go to Tools in the menu of this receiver and scroll to the bottom and click "Enable 4EXT Smartflash".
You can also with S-ON and Unlock change the CID with the command
Code:
fastboot oem writecid HTC_A07
and flash Europe RUU
I have attached 4EXT Recovery to the attachment
Also with the help of this script under Windows you can get Root rights on the stock ROM and perform S-OFF with JuopunutBear
Then get SuperCID and SuperMID and forget about all restrictions
Also you cannot install RUU with S-ON and Unlocked bootloader
To install RUU you need:S-ON and Locked (use fastboot oem lock) or S-OFF and it does not matter Locked or Unlocked
Related
Please Help me
I want to Flash shiped
RUU_Saga_HTC_Europe_1.47.401.4_Radio_20.28I.30.085AU_3805.06.02.03_M_release_199410_signed
and when i run it after som step it goes to hboot and in the pc it says customer id error ERROR 131
and say my cid have error or something like that
i try
RUU_Saga_S_HTC_Europe_2.10.401.8_Radio_20.4801.30.0822U_3822.10.08.04_M_release_225161_signed
but the same problem.
Iam in hboot and recovery dont work and it back to hboot
i have ******Security warning****** in top of screen
in adb when i type: fastboot devices it says
SH18NTJ02513 fastboot
and by fastboot getvar all
it says
C:\Users\MMMS>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 0.98.0002
(bootloader) version-baseband: 3805.06.02.03_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.27.405.6
(bootloader) serialno: SH18NTJ02513
(bootloader) imei: 358967044858668
(bootloader) product: saga
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PG8810000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 3979mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 0e35ea5b
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
all: Done!
what shood i do. please help
ayene said:
Please Help me
I want to Flash shiped
RUU_Saga_HTC_Europe_1.47.401.4_Radio_20.28I.30.085AU_3805.06.02.03_M_release_199410_signed
and when i run it after som step it goes to hboot and in the pc it says customer id error ERROR 131
and say my cid have error or something like that
i try
RUU_Saga_S_HTC_Europe_2.10.401.8_Radio_20.4801.30.0822U_3822.10.08.04_M_release_225161_signed
but the same problem.
Iam in hboot and recovery dont work and it back to hboot
i have ******Security warning****** in top of screen
in adb when i type: fastboot devices it says
SH18NTJ02513 fastboot
and by fastboot getvar all
it says
C:\Users\MMMS>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 0.98.0002
(bootloader) version-baseband: 3805.06.02.03_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.27.405.6
(bootloader) serialno: SH18NTJ02513
(bootloader) imei: 358967044858668
(bootloader) product: saga
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PG8810000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 3979mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 0e35ea5b
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
all: Done!
what shood i do. please help
Click to expand...
Click to collapse
Create a goldcard and then try flash the RUU again.
tpbklake said:
Create a goldcard and then try flash the RUU again.
Click to expand...
Click to collapse
i cant go to my rom and stay in hboot.
how can i make gold card without going to rom?
Odd, your cidnum is HTC__J15, the only RUU that has that number is
RUU_Saga_HTC_Europe_1.28.401.1_Radio_20.28b.30.0805U_38.03.02.11_M_release_177977_signed
And since your misc-version is 1.27.405.6 that RUU should flash.
I checked
RUU_Saga_HTC_Europe_1.47.401.4_Radio_20.28I.30.085AU_3805.06.02.03_M_release_199410_signed
RUU_Saga_HTC_Europe_2.10.401.5_Radio_20.4801.30.0822U_3822.10.08.04_M_release_219480_signed
RUU_Saga_HTC_Europe_2.10.401.8_Radio_20.4801.30.0822U_3822.10.08.04_M_release_225161_signed.exe
And they don't have that cidnum.
foX2delta said:
Odd, your cidnum is HTC__J15, the only RUU that has that number is
RUU_Saga_HTC_Europe_1.28.401.1_Radio_20.28b.30.0805U_38.03.02.11_M_release_177977_signed
And since your misc-version is 1.27.405.6 that RUU should flash.
I checked
RUU_Saga_HTC_Europe_1.47.401.4_Radio_20.28I.30.085AU_3805.06.02.03_M_release_199410_signed
RUU_Saga_HTC_Europe_2.10.401.5_Radio_20.4801.30.0822U_3822.10.08.04_M_release_219480_signed
RUU_Saga_HTC_Europe_2.10.401.8_Radio_20.4801.30.0822U_3822.10.08.04_M_release_225161_signed.exe
And they don't have that cidnum.
Click to expand...
Click to collapse
u mean if I flash it will be ok and I dont need gold card?
Its worth a try, I personalty think it will work.
At the end of the day its worth a try, it has merit.
foX2delta said:
Its worth a try, I personalty think it will work.
At the end of the day its worth a try, it has merit.
Click to expand...
Click to collapse
yes yes yes yes. it worked. U R nice man.
just how could i khnow the cid code of e rom?
and can i change my cid ofter s-off and reinstall other ruu?
When you extract the rom.zip (run RUU and go to the temp folder for rom.zip) inside the android-info.txt file.
Yes you can change your cid once you have s-offed and then install the RUU of choice (thats if you like being s-on and stock.
However you better make a goldcard just incase and if I were you i'd s-off and flash sense 3 roms if thats what you want.
Same Problem
Hey,
I have same problem and i have not fixed yet.
Here is some solution about making goldcard, maybe it can help.
And this is my subject follow it maybe somebody help me first..
good luck.
Why not use custom roms or at least pre rooted stock roms?!
Sent from my HTC Desire S using xda premium
Hi all
Sry because create new topic
I need find a rom for htc sensation and flashing rom with Unlocked, S-ON, Hboot 1.18.0000, recovery 4 ext
You can help me find a rom compatibility ( because i can't S-OFF my device)
rom can flash via Recovery 4 ext
thanks
ngockhanh1988 said:
Hi all
Sry because create new topic
I need find a rom for htc sensation and flashing rom with Unlocked, S-ON, Hboot 1.18.0000, recovery 4 ext
You can help me find a rom compatibility ( because i can't S-OFF my device)
rom can flash via Recovery 4 ext
thanks
Click to expand...
Click to collapse
because of your hboot version you are still on gb firmware so you can flash only gb roms
if you want to flash ics or jb roms you have to upgrade your firmware first
and to upgrade firmware you must S-OFF
use revolutionay.io mehtod to S-OFF
http://revolutionary.io/
after that upgrade firmware.flash 3.33 universal from here
http://forum.xda-developers.com/showthread.php?t=1459767
follow the instructions to the letter
and before flashing check md5 sums(important)
rzr86 said:
because of your hboot version you are still on gb firmware so you can flash only gb roms
if you want to flash ics or jb roms you have to upgrade your firmware first
and to upgrade firmware you must S-OFF
use revolutionay.io mehtod to S-OFF
http://revolutionary.io/
after that upgrade firmware.flash 3.33 universal from here
http://forum.xda-developers.com/showthread.php?t=1459767
follow the instructions to the letter
and before flashing check md5 sums(important)
Click to expand...
Click to collapse
The http://revolutionary.io/ is down do you have another idea ?
ReMuSeR said:
The http://revolutionary.io/ is down do you have another idea ?
Click to expand...
Click to collapse
post your bootloader details
the command is fastboot getvar all
Bootloader Detalis:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.18.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.50.401.1
(bootloader) serialno: SH164V803122
(bootloader) imei: 356440045379235
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813000
(bootloader) cidnum: HTC__Y13
(bootloader) battery-status: good
(bootloader) battery-voltage: 4115mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 9d24123f
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
ReMuSeR said:
Bootloader Detalis:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.18.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.50.401.1
(bootloader) serialno: SH164V803122
(bootloader) imei: 356440045379235
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813000
(bootloader) cidnum: HTC__Y13
(bootloader) battery-status: good
(bootloader) battery-voltage: 4115mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 9d24123f
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Click to expand...
Click to collapse
the only way to S-OFF is to upgrade officially first
did you try to do it from settings?
otherwise use this ruu.exe
http://androidruu.com/getdownload.p...0U_11.24A.3504.31_M_release_280871_signed.exe
then you can S-OFF with juopunutbear or rumrunner method
I'm trying to get my HTC Sensation to boot one of the 4.4 CyanogenMod unsupported ROM's, and after going through several walkthroughs I found here, I realized I had to upgrade my firmware before I could do that. So I used the "fastboot oem lock" command and reloaded a stock ROM using an RUU process. Now I'm ready to load one of the new CM ROM's, but I can't flash any boot image until I unlock the bootloader again. I tried using the HTCDev process again using my original Unlock_code.bin as well as a newly generated Unlock_code.bin, but no luck. I feel like this is the last speed bump to get over. Here are the results of my "getvar all":
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.29.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.33.401.106
(bootloader) serialno: HT162T527781
(bootloader) imei: 355066041626260
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5810000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4182mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 705f86f6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
When I go into the bootloader it currently says:
Code:
*** RELOCKED ***
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.29.0000
eMMC-boot
Mar 2 2012, 18:14:34
Any ideas of how I can unlock the bootloader long enough to flash a boot image? Any advice is much appreciated!
roswell1329 said:
I'm trying to get my HTC Sensation to boot one of the 4.4 CyanogenMod unsupported ROM's, and after going through several walkthroughs I found here, I realized I had to upgrade my firmware before I could do that. So I used the "fastboot oem lock" command and reloaded a stock ROM using an RUU process. Now I'm ready to load one of the new CM ROM's, but I can't flash any boot image until I unlock the bootloader again. I tried using the HTCDev process again using my original Unlock_code.bin as well as a newly generated Unlock_code.bin, but no luck. I feel like this is the last speed bump to get over. Here are the results of my "getvar all":
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.29.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.33.401.106
(bootloader) serialno: *************
(bootloader) imei: **********
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5810000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4182mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 705f86f6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
When I go into the bootloader it currently says:
Code:
*** RELOCKED ***
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.29.0000
eMMC-boot
Mar 2 2012, 18:14:34
Any ideas of how I can unlock the bootloader long enough to flash a boot image? Any advice is much appreciated!
Click to expand...
Click to collapse
since you are on S-OFF flash 3.33 universal from here
http://forum.xda-developers.com/showthread.php?t=1459767
follow the instructions to the letter
and before flashing check md5 sums(important)
after that install a custom recovery and flash a custom rom from it
you don't need to flash the custom rom's boot.img because you are on S-OFF
by the way you could just flash 3.33 universal in first place and avoiding the ruu process
note:remove you imei and s/n
don't show them in public
rzr86 said:
since you are on S-OFF flash 3.33 universal from here
http://forum.xda-developers.com/showthread.php?t=1459767
follow the instructions to the letter
and before flashing check md5 sums(important)
after that install a custom recovery and flash a custom rom from it
you don't need to flash the custom rom's boot.img because you are on S-OFF
by the way you could just flash 3.33 universal in first place and avoiding the ruu process
note:remove you imei and s/n
don't show them in public
Click to expand...
Click to collapse
That was it! Thank you very much. It's running like a champ now.
ONE XL AT&T(Evita) How to add super CID or unlock forcefully or alternate methods?
After trying CM11-12, I ended up in an android.phone stopped working "loop"(which happened to every rom I tested in different flavors )... To make story short, I have the "brilliant" idea to flash a RUU... and I ended up relocking. Seems I missed that I had edit(downgrade?) my "version-main" or something, because when trying to flash the ruu it said that my version is lower than mine or something. I'm also S-on, although I think I can access SU # with ADB(although it stops working sometimes)
Current status of phone:
can only go to fastboot mode
tampered
relocked
S-ON
Previous Unlock_code.bin I had is not working
Can not get new Unlock_code.bin because I fastboot is unable to write 11111111 or w/e
tried to hex /dev/block/mmcblk0p4 but it's not in that directory .. I did cd/ls to it and really isn't there
tried running ruu*.exe from windows but it says that my phone charge is less than 30% (I'm sure it's got more though...)
tried flashing the rom inside this but failed due version --RUU_EVITA_UL_ICS_40_S_Cingular_US_2.20.502.7_Radio_0.19as.32.09.11_2_10.105.32.25L_release_271865_signed.exe
tried flashing the rom inside this but it failed due being "image too large" (700+mb)
--HTC_One_X_RUU_5.18.502.1_2.exe
tried using mfastboot.exe but still says image too large
These are my fastboot vars
C:\android>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.14.0000
(bootloader) version-baseband: 0.24p.32.09.06
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT28JW303396
(bootloader) imei: 359691046275965
(bootloader) product: evita
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ8310000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4053mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-97c9a06e
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
What can I do to fix my device? At this point I don't mind which rom as long as I can take calls...
--Edit: Right now my main objective would be getting super CID/unlock and from there I would have more options .... So please if anyone have recomendations to get that, given my phone's condition, it will be greatly appreciated
Hi Guyz,
I am really stuck and I have tried every possible solution online but unable to solve it. I have HTC Sensation Pyramid stuck in boot loop. Although I am able to boot into bootloader but unable to do anything else. Its board was replaced so default HTC Dev Unlock don't work. Every other solution require to boot into the ROM and enable debugging for ADB like JuopunutBear S-OFF and Rumrunner.
Here are the details from fastoot getvar
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.27.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.45.401.3
(bootloader) serialno: HT15BV80****
(bootloader) imei: 359***********
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4117mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 617f0a98
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Any help will be highly appreciated, Thanks
Aero.
According your current device status your device should have been S-OFFed before.
As I can see you have SuperCID and your hboot version is higher than it should be as long as you probably had installed a European RUU and it should have an earlier version of hboot.
So the only solution for you will be to flash an official pyramid RUU for any carrier you like with version-main 1.45.401.3 or greater.
You can find Pyramid RUU's here.
I would sugest you to install the lattest RUU for the carrier of your choice.If you want a European RUU you can download a 3.33 fireware and S-OFF your device.
Juopunutbear S-OFF [NO HTCDEV UNLOCK]
Rumrunner S-OFF [NO NEED HTCDEV UNLOCK/NO WIRE TRICK]
Gatosbil said:
According your current device status your device should have been S-OFFed before.
As I can see you have SuperCID and your hboot version is higher than it should be as long as you probably had installed a European RUU and it should have an earlier version of hboot.
So the only solution for you will be to flash an official pyramid RUU for any carrier you like with version-main 1.45.401.3 or greater.
You can find Pyramid RUU's here.
I would sugest you to install the lattest RUU for the carrier of your choice.If you want a European RUU you can download a 3.33 fireware and S-OFF your device.
Juopunutbear S-OFF [NO HTCDEV UNLOCK]
Rumrunner S-OFF [NO NEED HTCDEV UNLOCK/NO WIRE TRICK]
Click to expand...
Click to collapse
Hi Gatosbil,
Thank you so soo much for the reply and to be honest, after trying everything on net, I put my phone in my "history box" lol... but you gave me hope that I might resurrect it back to life. Well, it does came back to life!! RUU 1.45.401.3 gave me Signature Error so I tried downloading and install 3.33.401.6 with success. And its alive now!!! Thanks to you
Now the S-OFF part, Juopunutbear require Ubuntu and I had a very bad experience with that as by running windows 10 and ubuntu on same system, my hard drive crashed and I lost a lot of data. Yes Live CD might work, but my laptop is 2 years old and I haven't used DVD-Rom for a long time and its not reading data from any CD or DVD. And Rumrunner website is giving Database error so I can not download anything from there until they fix the website. I will keep checking and as soon as its back, I will try Rumrunner to S-OFF and will let you know how it goes.
Here is the current Fastboot getvar all details:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.27.0000
(bootloader) version-baseband: 11.24A.3504.31_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.33.401.6
(bootloader) serialno: HT15BV80****
(bootloader) imei: 359************
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4163mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 617f0a98
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.561s
Thanks Again and Best Regards,
Aero.
Aerocaria said:
Hi Gatosbil,
Thank you so soo much for the reply and to be honest, after trying everything on net, I put my phone in my "history box" lol... but you gave me hope that I might resurrect it back to life. Well, it does came back to life!! RUU 1.45.401.3 gave me Signature Error so I tried downloading and install 3.33.401.6 with success. And its alive now!!! Thanks to you
Now the S-OFF part, Juopunutbear require Ubuntu and I had a very bad experience with that as by running windows 10 and ubuntu on same system, my hard drive crashed and I lost a lot of data. Yes Live CD might work, but my laptop is 2 years old and I haven't used DVD-Rom for a long time and its not reading data from any CD or DVD. And Rumrunner website is giving Database error so I can not download anything from there until they fix the website. I will keep checking and as soon as its back, I will try Rumrunner to S-OFF and will let you know how it goes.
Here is the current Fastboot getvar all details:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.27.0000
(bootloader) version-baseband: 11.24A.3504.31_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.33.401.6
(bootloader) serialno: HT15BV80****
(bootloader) imei: 359************
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4163mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 617f0a98
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.561s
Thanks Again and Best Regards,
Aero.
Click to expand...
Click to collapse
i will send the juopuntubear files(windows) for S-OFF via pm
but know this i don't think it will work on win10