here is a CWM recovery for Symphony T8i Tab. (attachment is at the bottom of the post). you need root access for installing this.
1. put the recovery.img file into the root of your sdcard.
2. download mobileuncle tools from playstore.
3. open mobileuncle tools and grant superuser request.
4. select update recovery. (Internet connection should be disabled)
5. you'll see the recovery.img file. tap on it.
6. a confirmation box will appear. tap "ok".
7. tap ok again to boot into recovery mode.
done!!!!! CWM has been installed in your tab!!!!!
how to normally boot into CWM?
just turn off your tab, wait for the vibration. now press vol+ and power button together. then you'll be on CWM!
[hit the thanks button if my post helped you!]
Related
CWM 5.0.2.8
Instructions
A. To enter the recovery, you need to disable the device to clamp down "on" and press "Volume -".
Two. In order to mix between the elements in recovery need to use the "Volume -" and "Volume".
Three. To select a menu item, use the "House" (In the previous menu selection was carried out rekaveri button "on", so now this button is not working and when you click on it will be a blank screen with the logo of CWM (if you accidentally clicked on, then return in the normal state can press the button one more time "on" button or menu).
4. To go back to paragraph (meaning back), you should use the "Back"
Five. Like everything, if anyone has found the comments about the instructions, you can write to me about it in the LS
Installation manual
A. Unzip the downloaded archive
Two. Go to the folder "ClockWorkMod v5.0.2.8 by RusTorg and SaNek011"
Three. Run the file "install.bat"
4. Connect the phone mode or in "DFU" (http://4pda.ru/forum/index.php?s=&showtopic=300717&view=findpost&p=13072356) or "FTM" (need androyd off above 2.1!)
Five. Follow the instructions in the program
6. After installation, you will automatically fall into recovery on this installation is finished
Setting the phone
A. Download the archive.
Two. Remove from the archive file "CMW-5.0.2.8-v9.img".
Three. Put the SD and rename the "recovery.img".
4. In a terminal enter
su
flash_image recovery / sdcard / recovery.img.
Five. In this set rekaveri: happy:!
---------------------------------------
http://translate.google.com
DOWNLOAD
Earlier we posted the screenshots, claiming to finally have nailed Qmobile Noir A7. Here is the most requested post for the step by step method of rooting, All you are required to do is follow the steps.
Installing CWMR
1. Download the Files
i. Scatter and CWMR for A7(Download Here)
ii. SPFlashTool ( Download Here )
iii. Drivers for A7 – CD or from the Q site.
iv. root_a7.zip( Download Here )
2. With phone on, connect the phone to the computer and start USB Debugging.
3. Install the Drivers to it through driver file.
4. Now Switch the phone off and connect the phone to the computer again. It’ll ask you to install the another driver. Install it from the preloaders downloaded.
5. Put the file in Scatter per Image Below.
6. Ensure nothing but the recovery check box is clicked. Rest remain unchecked.
7. Switch off your Phone. Take the Battery out for 5 Secs and reinsert the Battery.
8. On Flashtool press download.
9. Connect your phone cable connecting it to the computer. No hurries take your time. (Ensure when download was clicked your phone was not connected to the phone)
10. Upon successful flashing you will see the green circle icon.
11. Close the tool and restart your phone in recovery mode by holding power + Volume up
12. You should be able to enter CWMR.
Rooting Phone
Download Root_A7.zip file
Copy to SD card.
Power off your phone.
Turn on by pressing power button + volume up button.
Select “Install zip from sdcard” –> “Choose zip from sdcard” –> Now select “Root_A7.zip” –> Select Yes
When done Successfully Go Back main CWMR And Reboot your phone.
Check your applications section you’d have superuser there.
Open Superuser app and in settings update your binaries.(Congratulations you are rooted).
PS : INCPak never lied to anyone, doubt ever us we just ensure that this procedure is verified and doesn’t mess your phone !
- See more at: http://www.incpak.com/tech/lets-root-qmobile-noir-a7/#sthash.Vds1TVe2.dpuf
CREDITS:UBAID KHAN AND KHURRAM
Note- Before doing this, please ROOT your Lava Iris 458q. for rooting check this link
http://forum.xda-developers.com/showthread.php?p=49976717#post49976717
link to Download necessary file https://drive.google.com/folderview?id=0B74Xjste8p2VNmZGQWxvNTAteWc&usp=sharing
Note:-Please put all this in one singe folder)
Instructions:-
1. Install all Drivers inside that downloaded folder.
2. Put your phone in USB debugging mode from Developer Options in the Settings Menu. (If you cant find the Developer options, go to Settings> About Phone and tap the "build number" 8 times.)
3.Connect your phone to the computer. (In USB storage mode)
4. Open MtkDroidtools.exe from the folder MTK droid tools you downloaded before.
5. Wait till the device is detected (on the bar at the bottom)
6.Click on the ROOT button. and wait till the process is done.
7. Now go to the "root,backup,recovery" Tab.
8. from the 2nd box, select the option "To choose the boot.img file"
9.Click on the button "Recovery and Boot" and choose the Boot.img file downloaded before.
10. Click YES on the next popup asking Automatic CWM and YES on ALL the following popups.
After Reboot, the phone is successfully in CWM recovery MODE !!! (Use Volume up and down buttons to navigate and Power button as Enter)
Now that you have install CWM,
Note:-use windows 7 or lower version windows
Alternate Method
to flash recovery from your phone use this app link-https://play.google.com/store/apps/details?id=com.cgollner.flashify.
and link for recovery image is http://www.mediafire.com/download/9h56vdmnkkwofjt.
flash it happily...:victory:
yes it perfectly worked and rooted my phone.
patel_s said:
to flash recovery from your phone use this app link-https://play.google.com/store/apps/details?id=com.cgollner.flashify.
and link for recovery image is http://www.mediafire.com/download/9h56vdmnkkwofjt.
flash it happily...:victory:
Click to expand...
Click to collapse
Can u provide rooting method for lava iris x1 because vroot method is not working... It has KitKat running on it.
Sent from my iris X1 using XDA Free mobile app
General discussion topic and Guides for the ZTE Blade Vec 4G/Orange Rono/Sosphone 4G/Turkcell T50.
Root
1. Activate Developer Options, and tick USB Debugging.
2. Install from Google Play:
-BusyBox
-RootCheckerBasic
3.Install the 2 apps in the attached archive.
4. Open the app with a chinese name. Then press the only button on the screen, after that press the round button found next to the top.
5.Open the KingUser app, who will get root permission.
6. Enter busybox and wait for the initialization to finish. Then press install and give it root permission.
7. Install SUperSU from the playstore and press Update Binaries and then Normal. If you get an error, restart the phone and try again.
8.If it finished successfully, DON'T press restart but rather Delete the data of the 3 apps installed(2 chinese and one KingUser), and uninstall them.
9. ???
10. Profit. Now you haver permanent root and SuperSU as root manager. If everything was done corectly, RootCheckerBasic should show that the phone is rooted.
Archive:
https://drive.google.com/file/d/0B9WMSJf5LSatS3JlUzMtd3FxZjQ/view?usp=sharing
TWRP Recovery
You need to be rooted to try this.
1.Download and extract the "TWRP.img" file from the attached archive. Push it to the phone in the root directory of your sdcard.
2.Install "Flashify" from the Play Store.
3.Open the program and give it root access.
4.Select the "Backup/Restore" tab, then click "Backup Current Kernel" and "Backup Current Recovery". The app will backup your kernel and your recovery and will place them in "Android/data/com.cgollner.flashify".
5.Click on the "Flash" tab, Then click on "Flash Recovery", then on "Choose File". Select the "TWRP.img" file.
6.Press on "Yup!" and wait.
7.Now we can use TWRP Recovery by powering the phone up with Volume Up and Power.
Archive:
https://drive.google.com/file/d/0B9WMSJf5LSatZ0hpLTc1UmxtNDQ/view?usp=sharing
DemonROM by me - Deodexed - Cleaned - Based on the Norway ROM - Europe only ( International version comming soon)
Here is the LINK.
https://drive.google.com/file/d/0B9WMSJf5LSatOXRTb0dkNzV4NWM/view?usp=sharing
Be sure to make a full wipe before/after flashing for an optimal experience.
Tested on Orange Rono, but it should work on any device from Europe.
Be sure to flash some zips after that:
*GAPPS https://drive.google.com/file/d/0B9WMSJf5LSatT1lTWHZRZUhpZFE/view?usp=sharing
SuperSU https://drive.google.com/file/d/0B9WMSJf5LSatV1Z6Mk5YakZaT2s/view?usp=sharing
BusyBox https://drive.google.com/file/d/0B9WMSJf5LSatWTBtT1lSenE1aDg/view?usp=sharing
* MUST be flashed.
Have fun !
My Google Drive directory, dedicated for the ZTE Blade Vec 4G development.
https://drive.google.com/folderview...MzSnJtUlJsT1FBNWhYcGJJMnZtTTAwMHc&usp=sharing
MEGA directory with all of the Stock ROMs
https://mega.co.nz/#F!i8p3yLqA!ppd_x-aMyh4sce-8fJTffA
Post here any questions that you have.
I had a problem with TWRP .after flashing with flashify .vol up and power button works to boot in recovery but stuck in a logo" win team" for 2 mins and restart my phone.. Can't access my recovery
The ROM does not contains the kernel or i don't see it lol, great job anyway :good:
My Wifi Doesn't working but it was a good rom !
Root Samsung J2 2016 J210F
First of all Download Samsung USB driver From official samsung website
Download Odin from here.
Download TWRP Recovery from here.
Download SuperSU from here.
Install the Samsung USB Driver on your PC.
Extract the Odin Files in your PC.
Copy the TWRP Recovery files on your PC.
Move SuperSU file into Phone Internal memory.
Enable USB Debugging Mode->Tap 7-10 Times in Build Number->Enable USB debugging Mode.
Switch off your Mobile.Enter into Download mode->Volume Down+Home+Power Buttons.
After entering into Download Mode it will say Warning Press Volume Up button to continue.
Connect Your Mobile With PC via USB Cable.
Launch Odin Application.It Will Show the message added.If you did not get this message Repeat the above steps.
After Getting Added Message, Select AP Button then Browse for the TWRP Recovery file Select it, Then click start button.
After flash it will reboot automatically
.Now Switch off your Mobile-> Then press Volume Up+Home+Power Buttons to enter into Recovery mode.
Now it Will Boot into TWRP Recovery
Now select Install in TWRP Home, then Select SuperSu file then swipe to install
After the Installation Reboot Your Mobile.
Now You can Find the SuperSu in your Mobile Applications.
Thats it enjoy.....
Now XPOSED for J2 2016
Download xposed framework zip file from here.
Download Installer from here.
Download UnInstaller from here.
Place that both xposed framework zip and uninstaller zip file in internal memory.
Now Switch off your Mobile-> Then press Volume Up+Home+Power Buttons to enter into Recovery mode.
Now it Will Boot into TWRP Recovery
Now select Install in TWRP Home, then Select Xposed framework zip file then swipe to install
After the Installation Reboot Your Mobile.
First time it will took sometime to reboot....
If you getting bootloop -> go back to recovery mode then flash xposed uninstaller zip.
enjoy
Join here guys for whatsapp group J2 2016
https://chat.whatsapp.com/Gxr1FzeBPUF7ZlUU03Rj5J
So I only need the zip file and the uninstaller to install Xposed? For what do I need the installer then?
Its not work in my j2 2016
pgpselva said:
Root Samsung J2 2016 J210F
First of all Download Samsung USB driver From official samsung website
Download Odin from here.
Download TWRP Recovery from here.
Download SuperSU from here.
Install the Samsung USB Driver on your PC.
Extract the Odin Files in your PC.
Copy the TWRP Recovery files on your PC.
Move SuperSU file into Phone Internal memory.
Enable USB Debugging Mode->Tap 7-10 Times in Build Number->Enable USB debugging Mode.
Switch off your Mobile.Enter into Download mode->Volume Down+Home+Power Buttons.
After entering into Download Mode it will say Warning Press Volume Up button to continue.
Connect Your Mobile With PC via USB Cable.
Launch Odin Application.It Will Show the message added.If you did not get this message Repeat the above steps.
After Getting Added Message, Select AP Button then Browse for the TWRP Recovery file Select it, Then click start button.
After flash it will reboot automatically
.Now Switch off your Mobile-> Then press Volume Up+Home+Power Buttons to enter into Recovery mode.
Now it Will Boot into TWRP Recovery
Now select Install in TWRP Home, then Select SuperSu file then swipe to install
After the Installation Reboot Your Mobile.
Now You can Find the SuperSu in your Mobile Applications.
Thats it enjoy.....
Now XPOSED for J2 2016
Download xposed framework zip file from here.
Download Installer from here.
Download UnInstaller from here.
Place that both xposed framework zip and uninstaller zip file in internal memory.
Now Switch off your Mobile-> Then press Volume Up+Home+Power Buttons to enter into Recovery mode.
Now it Will Boot into TWRP Recovery
Now select Install in TWRP Home, then Select Xposed framework zip file then swipe to install
After the Installation Reboot Your Mobile.
First time it will took sometime to reboot....
If you getting bootloop -> go back to recovery mode then flash xposed uninstaller zip.
enjoy
Click to expand...
Click to collapse