Database Info

Clockwork Installation aborted with all ROM!

Hello guys, 2 weeks, I have a problem with the recovery.
With each flash ROM, which I try to get this error:
"Assert failed: getprop ("ro,product.device") == "crespo" I I getprop ("ro.build.product") == crespo" I I getprop ("ro.product.board") "crespo"
E: Error in / sdcard/update-oxygen-2.3-NS-signed.zip
(STATUS 7) INSTALLATION ABORTED"
Why? I'm desperate

Either u installed the wrong recovery or your flashing a zip for the wrong phone. Which phone do u have? Crespo or Crespo4g?

I have Nexus S (i9023) I am trying to flash the original rom, but I have the same error..

I have the exact same error trying to flash the We Scream-b7 zip from this forum. I have the Nexus S I9020T for Tmobile.

I had the same issue, problem is that you guys are running an older version of CWM.
Just install ROM manager from the market on your phone.
Click "Flash ClockworkMod Recovery".. it will flash the newest version of CWM on your phone.
Reboot into recovery after the installation and try to flash a ROM again, and it will just work.

Have you tried reflashing manually the recovery image from fastboot mode?

Icecoldmeat said:
I had the same issue, problem is that you guys are running an older version of CWM.
Just install ROM manager from the market on your phone.
Click "Flash ClockworkMod Recovery".. it will flash the newest version of CWM on your phone.
Reboot into recovery after the installation and try to flash a ROM again, and it will just work.
Click to expand...
Click to collapse
Ok, I'll try..

GallStones said:
Have you tried reflashing manually the recovery image from fastboot mode?
Click to expand...
Click to collapse
Yes, I tried

Please help!

moropazzo96 said:
Please help!
Click to expand...
Click to collapse
Did u flashed clockworkmod version 5.x.x.x ?

Icecoldmeat said:
Did u flashed clockworkmod version 5.x.x.x ?
Click to expand...
Click to collapse
Yes, I have clockwork 5.0.2.0..

check the manual bootloader menu CWR in the recovery menu? is there or you use for rom installation ROM MANAGER?

I install the ROM from the recovery menu, I can't use ROM Manager because I don't have root permissions

Lol, u didn't flash superuser?

If every time I get that error recovery, how do I flash? lol

On www.nexusshacks.com is a guide how to flash superuser via your command prompt on the pc. If you dont got a rooted phone u cant flash a rom.
Sent from my Nexus S

I found only one that makes me the zip from the flash recovery..

Please help

Just click the topic rooting nexus s new.. theres is a full guide plus the superuser flash. Heres the link:
http://nexusshacks.com/nexus-s-hacks/how-to-root-nexus-s-or-nexus-s-4g-new/
Sent from my Nexus S

Icecoldmeat said:
Just click the topic rooting nexus s new.. theres is a full guide plus the superuser flash. Heres the link:
http://nexusshacks.com/nexus-s-hacks/how-to-root-nexus-s-or-nexus-s-4g-new/
Sent from my Nexus S
Click to expand...
Click to collapse
Ok, now i have root permission.. I try to flash the recovery from rom manager?

[Q] (Q) ¿Error al entrar en CWM?

Hello friends, I am newbie in android something I wanted to install CWM 6.0.4.5 of this tutorial http://forum.xda-developers.com/showthread.php?t=2560928 and everything goes perfectly, but when squeezed keys + volume, power and home the ANDROID SYSTEM RECOVERY 3E shows me instead of CWM 6.0.4.5 and enter CWM have to do to step 4 with odin and remove the battery etc. .. and I can get! but only this time, after I turn it and attempt to re-enter but it appears the android system recovery 3e. Please help, I do not want this whole process to remove the battery to get. Thank you!

hi @matutecarp99
you have to flash this file called cwm-permanentor.zip with CWM to prevent the Stock ROM to flash it's own recovery over CWM
Warning : flashing cwm-permanentor.zip makes your device status custom.
you can find cwm-permanentor.zip here http://forum.xda-developers.com/showthread.php?t=2303395
find it in section B)Rooting it's one of those 2 links.
there is other solutions for this, mentioned in tutorial in your link, but this method i said worked for me.

matutecarp99 said:
Hello friends, I am newbie in android something I wanted to install CWM 6.0.4.5 of this tutorial http://forum.xda-developers.com/showthread.php?t=2560928 and everything goes perfectly, but when squeezed keys + volume, power and home the ANDROID SYSTEM RECOVERY 3E shows me instead of CWM 6.0.4.5 and enter CWM have to do to step 4 with odin and remove the battery etc. .. and I can get! but only this time, after I turn it and attempt to re-enter but it appears the android system recovery 3e. Please help, I do not want this whole process to remove the battery to get. Thank you!
Click to expand...
Click to collapse
It's because the firmware overwrite cwm with stock recovery, you must root it or directly flash custom ROM. Or use the trick from the first replier.
Sent from my GT-I9082 using Tapatalk

CWM
vahid8910 said:
hi @matutecarp99
you have to flash this file called cwm-permanentor.zip with CWM to prevent the Stock ROM to flash it's own recovery over CWM
Warning : flashing cwm-permanentor.zip makes your device status custom.
you can find cwm-permanentor.zip here http://forum.xda-developers.com/showthread.php?t=2303395
find it in section B)Rooting it's one of those 2 links.
there is other solutions for this, mentioned in tutorial in your link, but this method i said worked for me.
Click to expand...
Click to collapse
Thanks for responding! I have android 4.2.2 and my version of CWM is 6.0.4.5 this tutorial you sent me is for android 4.1 and the version of CWM "cwm-permanentor.zip" which is not .. I hope I help a friend!
No if you can help me with this, but never flashee one custom rom, I wanted to know if I could help install one with all precautions and detail because it's my first time .. ONLY IF POSSIBLE
I have the GT-I9105P with root and xposed and mods and tweaks. Thanks in advance!

that cwm-permanentor.zip worked for me on 4.2.2.
but you better make sure.

CWM
vahid8910 said:
that cwm-permanentor.zip worked for me on 4.2.2.
but you better make sure.
Click to expand...
Click to collapse
Risk of brick? or something similar? I have to flash with CWM?

matutecarp99 said:
Risk of brick? or something similar? I have to flash with CWM?
Click to expand...
Click to collapse
install it with CWM,
idk about brick, mine didn't brick.

CWM
I'm done updating my CWM to v6.0.4.5 right now... and it works perfectly
..
From Samsung S2+ (I9105P rooted ) running on CWM v6.0.4.5 android 4.2.2

CWM
vahid8910 said:
install it with CWM,
idk about brick, mine didn't brick.
Click to expand...
Click to collapse
Well now I install it with CWM and tell them how I was. I hope everything goes well, if something goes wrong not help me? I am very nervous, I'm not used to do this

CWM
matutecarp99 said:
Well now I install it with CWM and tell them how I was. I hope everything goes well, if something goes wrong not help me? I am very nervous, I'm not used to do this
Click to expand...
Click to collapse
Used Odin v3.07 I'm already update my CWM v6.0.4.5 before it was CWM v6.0.3.5
And now I'm ready to Flash cyanogenmod CM-11 Kitkat 4.4.2

CWM
vahid8910 said:
install it with CWM,
idk about brick, mine didn't brick.
Click to expand...
Click to collapse
You install it and always comes into CWM now thank you very much to all!
Could pass me the link of the tutorial to install android 4.4.2 rom kitkat? YOU!

Cyanogenmod 11
Elucidator21 said:
Used Odin v3.07 I'm already update my CWM v6.0.4.5 before it was CWM v6.0.3.5
And now I'm ready to Flash cyanogenmod CM-11 Kitkat 4.4.2
Click to expand...
Click to collapse
You Might Pass the link CM11 kitkat 4.4.2? Finish Install CWM UN while ago! : D
And tell me What son of ESA rom errors

@matutecarp99
http://forum.xda-developers.com/showthread.php?t=2568665
Don't forget to make a backup with CWM before flashing CM-11.

CWM
vahid8910 said:
@matutecarp99
http://forum.xda-developers.com/showthread.php?t=2568665
Don't forget to make a backup with CWM before flashing CM-11.
Click to expand...
Click to collapse
Sorry friend, but never ever flashe rom, as is done already, but I never did and do not know how the backup is done, explain me please? And also how is restored .. thanks

matutecarp99 said:
Sorry friend, but never ever flashe rom, as is done already, but I never did and do not know how the backup is done, explain me please? And also how is restored .. thanks
Click to expand...
Click to collapse
you can see back up and restore in CWM.
actually backup is not necessary i suggested it because it's good to have a back up of stock rom, so whenever anything goes wrong you can restore your phone as it was.

vahid8910 said:
you can see back up and restore in CWM.
actually backup is not necessary i suggested it because it's good to have a back up of stock rom, so whenever anything goes wrong you can restore your phone as it was.
Click to expand...
Click to collapse
As it is my first time to install a custom rom will do the backup!
Xq says build 2 build 1 etc. .. not that is!, are updates rom? And I wanted you to tell me what are the BUGS this rom
USB works? etc. ..
Ahh DOWNLOADS and above in the tutorial there are patches if I'm not mistaken, that is? I am VERY BASIC IN ANDROID APOLOGY
I am from Argentina speak non-English, use google translator xD!

matutecarp99 said:
As it is my first time to install a custom rom will do the backup!
Xq says build 2 build 1 etc. .. not that is!, are updates rom? And I wanted you to tell me what are the BUGS this rom
USB works? etc. ..
Ahh DOWNLOADS and above in the tutorial there are patches if I'm not mistaken, that is? I am VERY BASIC IN ANDROID APOLOGY
I am from Argentina speak non-English, use google translator xD!
Click to expand...
Click to collapse
Like vahid8910 said, you need to back up your device thru CWM.. did u back up your device? theres a lot of back up tutorial on youtube try to
watch 1st before flashing Cyanogenmod CM11..
You need Only the Build #5 and download Gapps... here's the link... CM11 and GApps http://wiki.cyanogenmod.org/w/Google_Apps

Cyanogenmod 11
Elucidator21 said:
Like vahid8910 said, you need to back up your device thru CWM.. did u back up your device? theres a lot of back up tutorial on youtube try to
watch 1st before flashing Cyanogenmod CM11..
You need Only the Build #5 and download Gapps... here's the link... CM11 and GooleApps http://wiki.cyanogenmod.org/w/Google_Apps
Click to expand...
Click to collapse
I already have backup done, I have "gapps-20140105-signed.zip-kk" 83.1 MB and "cm-11-20140121-UNOFFICIAL-s2vep.zip" 196 MB internal memory and external SD (I have them in the 2 memories just in case) now I have to flash. 1 -. CM11 In CWM select install if and same with gapps and reboot system now? No need to do anything WIPES dalvin cache etc. .. please explain it step by step I would not bricking THANKS
PD: I have root, I have seeder (tweak) a few mods and xposed. Also I mount folder (to passing games to external sd)
It should be checked usb debugging? And where I have to leave the backup made​​?
What are the bugs? I'll be able to reinstall xposed? Also change the DPI of 240-210
ALL THAT I MADE MY GALAXY S2 PLUS (I9105P)

you need to wipe it 1st before flashing CM11 and Gapps...

Cyanogenmod 11
Elucidator21 said:
you need to wipe it 1st before flashing CM11 and Gapps...
Click to expand...
Click to collapse
I tell you the steps you do and tell me if I do something wrong:
1.-Wipe data factory reset
2.-Wipe cache partition
3.-Install zip from sd card, CM11
4.-Install zip from sd card, GAPPS
5.-Reboot system now
If you do these step Ships all well? THANKS

[Q] Problem installing rom by recovery

Well I am new to the forum, and am having a problem, every time I do an update appears an error in recovery from my galaxy core i8262b:
E: unknown volume for path [/ sdcard]
I need some help ...
Let the image of a similar error

That's not even galaxy core you're trying to install the ROM to.
Sent from my GT-I8260

Your mistake : You are flashing with Stock Recovery
Fr0zenMaster said:
Well I am new to the forum, and am having a problem, every time I do an update appears an error in recovery from my galaxy core i8262b:
E: unknown volume for path [/ sdcard]
I need some help ...
Let the image of a similar error
Click to expand...
Click to collapse
Dude root your device first and then install CWM Recovery and then use the CWM Recovery to flash whichever ROM(for your device only) you have.
YOU ARE FLASHING WITH STOCK RECOVERY THERE YOU ARE MAKING MISTAKE
--------------------------------------------------------------------------
Press THANKS if I have helped you!

M_E_G_A_T_R_O_N said:
Dude root your device first and then install CWM Recovery and then use the CWM Recovery to flash whichever ROM(for your device only) you have.
YOU ARE FLASHING WITH STOCK RECOVERY THERE YOU ARE MAKING MISTAKE
--------------------------------------------------------------------------
Press THANKS if I have helped you!
Click to expand...
Click to collapse
I'm trying to do the same with the official ROM, but always of this error. Using CWM Recovery can also install official roms?

Yes!
Fr0zenMaster said:
I'm trying to do the same with the official ROM, but always of this error. Using CWM Recovery can also install official roms?
Click to expand...
Click to collapse
Ya you can install official ROM with CWM Recovery

M_E_G_A_T_R_O_N said:
Ya you can install official ROM with CWM Recovery
Click to expand...
Click to collapse
So yeah, I will install and when finished put my results, thanks for the help friend
This CWM recovery here that galaxy core?
http://forum.xda-developers.com/showthread.php?t=2645964

Fr0zenMaster said:
So yeah, I will install and when finished put my results, thanks for the help friend
This CWM recovery here that galaxy core?
http://forum.xda-developers.com/showthread.php?t=2645964
Click to expand...
Click to collapse
No your link is for higher version of Android, i mean it is for Android 4.3 or later and these versions have not come yet. Although CM11 is out but it is beta version. So better you download BUILD 2 from the following link.
http://forum.xda-developers.com/showthread.php?t=2660261

[Q] Custom recovery for installing gnabo rom

hi there. which custom recovery that I should use to install Gnabo ROM V5?
I tried using philz touch 6.12.8 and keep having error code 7 when I install the ROM
my device is N8000

I used latest philz recovery and worked fine for me
This are the latest versions
The flashable zip:
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/n8000/philz_touch_6.48.4-n8000.zip
and this is a odin version:
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/n8000/philz_touch_6.48.4-n8000.tar.md5
Try and let me know if it worked for you

jika23 said:
I used latest philz recovery and worked fine for me
This are the latest versions
The flashable zip:
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/n8000/philz_touch_6.48.4-n8000.zip
and this is a odin version:
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/n8000/philz_touch_6.48.4-n8000.tar.md5
Try and let me know if it worked for you
Click to expand...
Click to collapse
it works like a charm. thanks

Brother, you also installed the bootloader?

Pablo Baruc said:
Brother, you also installed the bootloader?
Click to expand...
Click to collapse
Yes i did, I come from JB 4.1.2.
I heard if i'm not install the BL, wifi will not work properly
just try it for yourself and let me know

Philz recovery is unresponsive sometimes and always has hiccup when I try to install zip files from external sd card

I usw TWRP 2.7.1 and it works very gold.

[Q] SlimCrespo 4.3 to SlimCrespo 4.4.2 problem

Please i want to flash my Nexus S from Slimcrespo 4.3 to Slimcrespo 4.4.2
When i do flash from sdcard ...few seconds and flash aborte.
I follow all steps in recovery...Wipe data/factory reset...Wipe cache partition...Advanced then Wipe Dalvik cache...install zip from sdcard...Choose zip from sdcard.

What's your recovery version?
You need CWM 6.0.4.3 and above...

Please how to install a recovery on my nexus ?
My recovery now is 5.0.xxx

Bistouri said:
Please how to install a recovery on my nexus ?
My recovery now is 5.0.xxx
Click to expand...
Click to collapse
For now use the recovery in this post: http://forum.xda-developers.com/showpost.php?p=54472007&postcount=100
Copy it to your SD card and flash it just like a normal ROM. Then reboot again to the recovery and flash whatever KK ROM you like.
Also, don;t forget to manually wipe /system partition as you are going from 4.3 to 4.4.2

@Senior Member
I do that for TWRP but i have an error message :
Installation aborted...
So the TWRP 2..7.1.0 not installed...

Bistouri said:
@Senior Member
I do that for TWRP but i have an error message :
Installation aborted...
So the TWRP 2..7.1.0 not installed...
Click to expand...
Click to collapse
try this recovery: http://forum.xda-developers.com/nexus-s/development/crespo-philz-touch-t2284670

smit.sanghavi said:
try this recovery: http://forum.xda-developers.com/nexus-s/development/crespo-philz-touch-t2284670
Click to expand...
Click to collapse
Thanks a lot ...the flash is done successfuly...with philz-touch.