Database Info

Clockwork Installation aborted with all ROM!

Hello guys, 2 weeks, I have a problem with the recovery.
With each flash ROM, which I try to get this error:
"Assert failed: getprop ("ro,product.device") == "crespo" I I getprop ("ro.build.product") == crespo" I I getprop ("ro.product.board") "crespo"
E: Error in / sdcard/update-oxygen-2.3-NS-signed.zip
(STATUS 7) INSTALLATION ABORTED"
Why? I'm desperate

Either u installed the wrong recovery or your flashing a zip for the wrong phone. Which phone do u have? Crespo or Crespo4g?

I have Nexus S (i9023) I am trying to flash the original rom, but I have the same error..

I have the exact same error trying to flash the We Scream-b7 zip from this forum. I have the Nexus S I9020T for Tmobile.

I had the same issue, problem is that you guys are running an older version of CWM.
Just install ROM manager from the market on your phone.
Click "Flash ClockworkMod Recovery".. it will flash the newest version of CWM on your phone.
Reboot into recovery after the installation and try to flash a ROM again, and it will just work.

Have you tried reflashing manually the recovery image from fastboot mode?

Icecoldmeat said:
I had the same issue, problem is that you guys are running an older version of CWM.
Just install ROM manager from the market on your phone.
Click "Flash ClockworkMod Recovery".. it will flash the newest version of CWM on your phone.
Reboot into recovery after the installation and try to flash a ROM again, and it will just work.
Click to expand...
Click to collapse
Ok, I'll try..

GallStones said:
Have you tried reflashing manually the recovery image from fastboot mode?
Click to expand...
Click to collapse
Yes, I tried

Please help!

moropazzo96 said:
Please help!
Click to expand...
Click to collapse
Did u flashed clockworkmod version 5.x.x.x ?

Icecoldmeat said:
Did u flashed clockworkmod version 5.x.x.x ?
Click to expand...
Click to collapse
Yes, I have clockwork 5.0.2.0..

check the manual bootloader menu CWR in the recovery menu? is there or you use for rom installation ROM MANAGER?

I install the ROM from the recovery menu, I can't use ROM Manager because I don't have root permissions

Lol, u didn't flash superuser?

If every time I get that error recovery, how do I flash? lol

On www.nexusshacks.com is a guide how to flash superuser via your command prompt on the pc. If you dont got a rooted phone u cant flash a rom.
Sent from my Nexus S

I found only one that makes me the zip from the flash recovery..

Please help

Just click the topic rooting nexus s new.. theres is a full guide plus the superuser flash. Heres the link:
http://nexusshacks.com/nexus-s-hacks/how-to-root-nexus-s-or-nexus-s-4g-new/
Sent from my Nexus S

Icecoldmeat said:
Just click the topic rooting nexus s new.. theres is a full guide plus the superuser flash. Heres the link:
http://nexusshacks.com/nexus-s-hacks/how-to-root-nexus-s-or-nexus-s-4g-new/
Sent from my Nexus S
Click to expand...
Click to collapse
Ok, now i have root permission.. I try to flash the recovery from rom manager?

[CWM]Samsung Galaxy Y (ALPHA)

I have tried my best to make it work but I am not able to figure-out what is wrong with it.
I am able to boot into CWM but it is not performing functions like backup,restore,mount,system,etc.
But you can download the attached zip place it in the root of your SD-CARD and flash it from recovery.
After you fla**** with stock recovery, it will automatically OPEN CWM recovery.
You can scroll with volume buttons and center button to select and power button to go back.
But after reboot it will when you press power+volume up+centre it will boot in stock samsung recovery.
After you flash it you can also use ROM MANAGER and press Reboot into Recovery to boot in CWM Recovery.
It will not hurt your phone but i am not responsible for any harm to your phone.
Any help is appreciated.
EDIT: My recovery is not working. Use this recovery by Skin1980: www.multiupload.com/IGKG2L5RAF

Why is this in the Questions and Answers section?

Because I want help in making it stable.

I am not a developer.
But.. Galaxy 5's recovery works(for me atleast) on Galaxy Y, so you might wanna have a look at its code, it can not mount though.. and it also is overwritten or something and everytime I use ROM manager to boot up n CWM it gets replaced again(same as u said in short).
P.S. 'Thanks' for trying.

still wait to finish.i vote you

I expect this was a long time, trying out many more of you, I voted you

install CMW recovery on Galaxy Y [ TESTED ]
you can install clockmod recovery very easy just you need is rooted gallaxy y.
From market download rom manager and serch for samsung galaxy mini
install it - will atje some time according to speed of net-
the click reboot into recovery and crack man you are into recovery.
for new cyanogen rom for GALAXY Y - www(.)romfory(.)blogspot(.)com
do click thankzzz....

ankit024 said:
you can install clockmod recovery very easy just you need is rooted gallaxy y.
From market download rom manager and serch for samsung galaxy mini
install it - will atje some time according to speed of net-
the click reboot into recovery and crack man you are into recovery.
for new cyanogen rom for GALAXY Y - www(.)romfory(.)blogspot(.)com
do click thankzzz....
Click to expand...
Click to collapse
give me some pic plz.

Hi,
This CWM recovery if for 2.3.5(i forgot the build no)? or 2.3.6(DKK4 which I have)?
can somebody post a normalboot.img of this?
many thanks!

im waiting for work n the stable one!! keep posting guyss!!!

great work.. waiting fr full working beta release

I built a CWM based recovery for Galaxy_Y
this is for FW: S5360DXKK4
http://www.multiupload.com/48YV5Z4YLQ
Flash it with Odin.... in the PDA field
Report me ASAP

Skin1980 said:
I built a CWM based recovery for Galaxy_Y
this is for FW: S5360DXKK4
http://www.multiupload.com/48YV5Z4YLQ
Flash it with Odin.... in the PDA field
Report me ASAP
Click to expand...
Click to collapse
does it works for all firmware?tell as more about it please

Skin1980 said:
I built a CWM based recovery for Galaxy_Y
this is for FW: S5360DXKK4
Flash it with Odin.... in the PDA field
Report me ASAP
Click to expand...
Click to collapse
failed in flashing progress
i think this because s5360 can't install one-package firmware

anyone try successful??

failed also, i am using cygwin to recompile it as .tar
but it still says the same thing..
i thought the one package is already solved there was a blog who made that post about flashing in one package.

ankit024 said:
you can install clockmod recovery very easy just you need is rooted gallaxy y.
From market download rom manager and serch for samsung galaxy mini
install it - will atje some time according to speed of net-
the click reboot into recovery and crack man you are into recovery.
for new cyanogen rom for GALAXY Y - www(.)romfory(.)blogspot(.)com
do click thankzzz....
Click to expand...
Click to collapse
Yeah but the backup and restore is not functional... It dont recognize /data between making backup so on the end it dont make md5 sum and thats al... unuseable recovery...

vndlsm said:
failed also, i am using cygwin to recompile it as .tar
but it still says the same thing..
i thought the one package is already solved there was a blog who made that post about flashing in one package.
Click to expand...
Click to collapse
unfortunately its not solved!its theoriticaly but it does not work!i wish someone could find a solution to one package flash!

If there's somebody that can do the tester please write to me... i haven't this phone but i'm pretty sure that i can solve this in few time
Inviato dal mio GT-I9100 usando Tapatalk

Skin1980 said:
If there's somebody that can do the tester please write to me... i haven't this phone but i'm pretty sure that i can solve this in few time
Inviato dal mio GT-I9100 usando Tapatalk
Click to expand...
Click to collapse
I have tried to flash it with ODIN but it failed then I made an update.zip package with your recovery but after flashing it soft-bricked my phone.
I think something is wrong with the recovery you should fix it.
I can test these recoveries for you but since I am going out for holiday for 10 days sometime I may not test it instantly.
Thanks for your participation in development for this phone.

[Q] (Q) ¿Error al entrar en CWM?

Hello friends, I am newbie in android something I wanted to install CWM 6.0.4.5 of this tutorial http://forum.xda-developers.com/showthread.php?t=2560928 and everything goes perfectly, but when squeezed keys + volume, power and home the ANDROID SYSTEM RECOVERY 3E shows me instead of CWM 6.0.4.5 and enter CWM have to do to step 4 with odin and remove the battery etc. .. and I can get! but only this time, after I turn it and attempt to re-enter but it appears the android system recovery 3e. Please help, I do not want this whole process to remove the battery to get. Thank you!

hi @matutecarp99
you have to flash this file called cwm-permanentor.zip with CWM to prevent the Stock ROM to flash it's own recovery over CWM
Warning : flashing cwm-permanentor.zip makes your device status custom.
you can find cwm-permanentor.zip here http://forum.xda-developers.com/showthread.php?t=2303395
find it in section B)Rooting it's one of those 2 links.
there is other solutions for this, mentioned in tutorial in your link, but this method i said worked for me.

matutecarp99 said:
Hello friends, I am newbie in android something I wanted to install CWM 6.0.4.5 of this tutorial http://forum.xda-developers.com/showthread.php?t=2560928 and everything goes perfectly, but when squeezed keys + volume, power and home the ANDROID SYSTEM RECOVERY 3E shows me instead of CWM 6.0.4.5 and enter CWM have to do to step 4 with odin and remove the battery etc. .. and I can get! but only this time, after I turn it and attempt to re-enter but it appears the android system recovery 3e. Please help, I do not want this whole process to remove the battery to get. Thank you!
Click to expand...
Click to collapse
It's because the firmware overwrite cwm with stock recovery, you must root it or directly flash custom ROM. Or use the trick from the first replier.
Sent from my GT-I9082 using Tapatalk

CWM
vahid8910 said:
hi @matutecarp99
you have to flash this file called cwm-permanentor.zip with CWM to prevent the Stock ROM to flash it's own recovery over CWM
Warning : flashing cwm-permanentor.zip makes your device status custom.
you can find cwm-permanentor.zip here http://forum.xda-developers.com/showthread.php?t=2303395
find it in section B)Rooting it's one of those 2 links.
there is other solutions for this, mentioned in tutorial in your link, but this method i said worked for me.
Click to expand...
Click to collapse
Thanks for responding! I have android 4.2.2 and my version of CWM is 6.0.4.5 this tutorial you sent me is for android 4.1 and the version of CWM "cwm-permanentor.zip" which is not .. I hope I help a friend!
No if you can help me with this, but never flashee one custom rom, I wanted to know if I could help install one with all precautions and detail because it's my first time .. ONLY IF POSSIBLE
I have the GT-I9105P with root and xposed and mods and tweaks. Thanks in advance!

that cwm-permanentor.zip worked for me on 4.2.2.
but you better make sure.

CWM
vahid8910 said:
that cwm-permanentor.zip worked for me on 4.2.2.
but you better make sure.
Click to expand...
Click to collapse
Risk of brick? or something similar? I have to flash with CWM?

matutecarp99 said:
Risk of brick? or something similar? I have to flash with CWM?
Click to expand...
Click to collapse
install it with CWM,
idk about brick, mine didn't brick.

CWM
I'm done updating my CWM to v6.0.4.5 right now... and it works perfectly
..
From Samsung S2+ (I9105P rooted ) running on CWM v6.0.4.5 android 4.2.2

CWM
vahid8910 said:
install it with CWM,
idk about brick, mine didn't brick.
Click to expand...
Click to collapse
Well now I install it with CWM and tell them how I was. I hope everything goes well, if something goes wrong not help me? I am very nervous, I'm not used to do this

CWM
matutecarp99 said:
Well now I install it with CWM and tell them how I was. I hope everything goes well, if something goes wrong not help me? I am very nervous, I'm not used to do this
Click to expand...
Click to collapse
Used Odin v3.07 I'm already update my CWM v6.0.4.5 before it was CWM v6.0.3.5
And now I'm ready to Flash cyanogenmod CM-11 Kitkat 4.4.2

CWM
vahid8910 said:
install it with CWM,
idk about brick, mine didn't brick.
Click to expand...
Click to collapse
You install it and always comes into CWM now thank you very much to all!
Could pass me the link of the tutorial to install android 4.4.2 rom kitkat? YOU!

Cyanogenmod 11
Elucidator21 said:
Used Odin v3.07 I'm already update my CWM v6.0.4.5 before it was CWM v6.0.3.5
And now I'm ready to Flash cyanogenmod CM-11 Kitkat 4.4.2
Click to expand...
Click to collapse
You Might Pass the link CM11 kitkat 4.4.2? Finish Install CWM UN while ago! : D
And tell me What son of ESA rom errors

@matutecarp99
http://forum.xda-developers.com/showthread.php?t=2568665
Don't forget to make a backup with CWM before flashing CM-11.

CWM
vahid8910 said:
@matutecarp99
http://forum.xda-developers.com/showthread.php?t=2568665
Don't forget to make a backup with CWM before flashing CM-11.
Click to expand...
Click to collapse
Sorry friend, but never ever flashe rom, as is done already, but I never did and do not know how the backup is done, explain me please? And also how is restored .. thanks

matutecarp99 said:
Sorry friend, but never ever flashe rom, as is done already, but I never did and do not know how the backup is done, explain me please? And also how is restored .. thanks
Click to expand...
Click to collapse
you can see back up and restore in CWM.
actually backup is not necessary i suggested it because it's good to have a back up of stock rom, so whenever anything goes wrong you can restore your phone as it was.

vahid8910 said:
you can see back up and restore in CWM.
actually backup is not necessary i suggested it because it's good to have a back up of stock rom, so whenever anything goes wrong you can restore your phone as it was.
Click to expand...
Click to collapse
As it is my first time to install a custom rom will do the backup!
Xq says build 2 build 1 etc. .. not that is!, are updates rom? And I wanted you to tell me what are the BUGS this rom
USB works? etc. ..
Ahh DOWNLOADS and above in the tutorial there are patches if I'm not mistaken, that is? I am VERY BASIC IN ANDROID APOLOGY
I am from Argentina speak non-English, use google translator xD!

matutecarp99 said:
As it is my first time to install a custom rom will do the backup!
Xq says build 2 build 1 etc. .. not that is!, are updates rom? And I wanted you to tell me what are the BUGS this rom
USB works? etc. ..
Ahh DOWNLOADS and above in the tutorial there are patches if I'm not mistaken, that is? I am VERY BASIC IN ANDROID APOLOGY
I am from Argentina speak non-English, use google translator xD!
Click to expand...
Click to collapse
Like vahid8910 said, you need to back up your device thru CWM.. did u back up your device? theres a lot of back up tutorial on youtube try to
watch 1st before flashing Cyanogenmod CM11..
You need Only the Build #5 and download Gapps... here's the link... CM11 and GApps http://wiki.cyanogenmod.org/w/Google_Apps

Cyanogenmod 11
Elucidator21 said:
Like vahid8910 said, you need to back up your device thru CWM.. did u back up your device? theres a lot of back up tutorial on youtube try to
watch 1st before flashing Cyanogenmod CM11..
You need Only the Build #5 and download Gapps... here's the link... CM11 and GooleApps http://wiki.cyanogenmod.org/w/Google_Apps
Click to expand...
Click to collapse
I already have backup done, I have "gapps-20140105-signed.zip-kk" 83.1 MB and "cm-11-20140121-UNOFFICIAL-s2vep.zip" 196 MB internal memory and external SD (I have them in the 2 memories just in case) now I have to flash. 1 -. CM11 In CWM select install if and same with gapps and reboot system now? No need to do anything WIPES dalvin cache etc. .. please explain it step by step I would not bricking THANKS
PD: I have root, I have seeder (tweak) a few mods and xposed. Also I mount folder (to passing games to external sd)
It should be checked usb debugging? And where I have to leave the backup made​​?
What are the bugs? I'll be able to reinstall xposed? Also change the DPI of 240-210
ALL THAT I MADE MY GALAXY S2 PLUS (I9105P)

you need to wipe it 1st before flashing CM11 and Gapps...

Cyanogenmod 11
Elucidator21 said:
you need to wipe it 1st before flashing CM11 and Gapps...
Click to expand...
Click to collapse
I tell you the steps you do and tell me if I do something wrong:
1.-Wipe data factory reset
2.-Wipe cache partition
3.-Install zip from sd card, CM11
4.-Install zip from sd card, GAPPS
5.-Reboot system now
If you do these step Ships all well? THANKS

help me plz I cant install custom rom on i1900g

Hi..from recovery in my s2 i1900g and choose the rom to install...an error messege appears it says { E:Error in /tmp/sideload/package.zip (status7).
I hope u will help me
Thank you very much

anyone can help me please?

audi19844 said:
Hi..from recovery in my s2 i1900g and choose the rom to install...an error messege appears it says { E:Error in /tmp/sideload/package.zip (status7).
I hope u will help me
Thank you very much
Click to expand...
Click to collapse
Which rom do you want to install? Which firmware / recovery version is actually installed on the phone?

LS.xD said:
Which rom do you want to install? Which firmware / recovery version is actually installed on the phone?
Click to expand...
Click to collapse
this is the rom i want to install
http://forum.xda-developers.com/galaxy-s2/development/i9100g-kk-4-4-2-t2729696
★SONIC OPEN KANG PROJECT 》》SOKP★
my recovery is v6.0.1.2

audi19844 said:
this is the rom i want to install
http://forum.xda-developers.com/galaxy-s2/development/i9100g-kk-4-4-2-t2729696
★SONIC OPEN KANG PROJECT 》》SOKP★
my recovery is v6.0.1.2
Click to expand...
Click to collapse
You CAN'T ! At least you can't with CWM 6.0.1.2 as its tooooooooooo old. I'll post a proper recovery version
Use PhilZ advanced CWM 6.19.3 as its found HERE

thank you for help..but please
odin 3 dont read the recovery file !! it shown as empty folder ...what prog can solve this???

audi19844 said:
thank you for help..but please
odin 3 dont read the recovery file !! it shown as empty folder ...what prog can solve this???
Click to expand...
Click to collapse
Which file did you use?
the tar.md5 is for ODIN
the.zip is flashable via your actual recovery

LS.xD said:
Which file did you use?
the tar.md5 is for ODIN
the.zip is flashable via your actual recovery
Click to expand...
Click to collapse
the winrar file is on my pc now...i tried to put it via odin..when i choose the file in odin i see nothong to load !!
I TRIED then to flash it via the old recovery i have...from sd zip file ...it makes the steps for instalation of recovery file...then it says finished the instalation *(reboot the recovery )..after reboot i find the old recovery(6.0.1.2) and nothing updated!!

may you Install Teamviewer that I can perform installing the recovery for you?
Sent from my beloved HTC One S using (most time buggy) Tapatalk

[Q] TWRP recovery v2.8.5.0 not working

hi friends pls some one help me out ,,,
i am using TWRP Recovery v2.8.5.0 i am unable to install ROMS, how to change the TWRP to CWM,
i am unable to install anything through this TWRP, pls help me out with friends. :crying:

santhu/sonu said:
hi friends pls some one help me out ,,,
i am using TWRP Recovery v2.8.5.0 i am unable to install ROMS, how to change the TWRP to CWM,
i am unable to install anything through this TWRP, pls help me out with friends. :crying:
Click to expand...
Click to collapse
Just download the latest recovery for your device and flash it the same way you did with TWRP. (Could try a newer version of TWRP if available cwm or philz as well if there available)

A_Bunny said:
Just download the latest recovery for your device and flash it the same way you did with TWRP. (Could try a newer version of TWRP if available cwm or philz as well if there available)
Click to expand...
Click to collapse
but the current version which i am using know, i am unable to find the partition to install the file, at that what i have to do,,

santhu/sonu said:
but the current version which i am using know, i am unable to find the partition to install the file, at that what i have to do,,
Click to expand...
Click to collapse
What phone are you using? Also what exactly is the error?

A_Bunny said:
What phone are you using? Also what exactly is the error?
Click to expand...
Click to collapse
phone model LG P705, i am unable to install the NEW ROM or RECOVERY from this recovery, i am unable to find the partition when i am into recovery, thats the main error which i am getting :crying::crying:

santhu/sonu said:
phone model LG P705, i am unable to install the NEW ROM or RECOVERY from this recovery, i am unable to find the partition when i am into recovery, thats the main error which i am getting :crying::crying:
Click to expand...
Click to collapse
No you have to flash the other recovery though fastboot using your computer. Not though your current recovery.

A_Bunny said:
No you have to flash the other recovery though fastboot using your computer. Not though your current recovery.
Click to expand...
Click to collapse
thank u i have flashed through the fastboot, and its working know, thank u once again :fingers-crossed::angel:

santhu/sonu said:
thank u i have flashed through the fastboot, and its working know, thank u once again :fingers-crossed::angel:
Click to expand...
Click to collapse
hi bro, is there any lollipop 5.0 version for LG P705, pls let me know