help me plz I cant install custom rom on i1900g - General Questions and Answers

Hi..from recovery in my s2 i1900g and choose the rom to install...an error messege appears it says { E:Error in /tmp/sideload/package.zip (status7).
I hope u will help me
Thank you very much

anyone can help me please?

audi19844 said:
Hi..from recovery in my s2 i1900g and choose the rom to install...an error messege appears it says { E:Error in /tmp/sideload/package.zip (status7).
I hope u will help me
Thank you very much
Click to expand...
Click to collapse
Which rom do you want to install? Which firmware / recovery version is actually installed on the phone?

LS.xD said:
Which rom do you want to install? Which firmware / recovery version is actually installed on the phone?
Click to expand...
Click to collapse
this is the rom i want to install
http://forum.xda-developers.com/galaxy-s2/development/i9100g-kk-4-4-2-t2729696
★SONIC OPEN KANG PROJECT 》》SOKP★
my recovery is v6.0.1.2

audi19844 said:
this is the rom i want to install
http://forum.xda-developers.com/galaxy-s2/development/i9100g-kk-4-4-2-t2729696
★SONIC OPEN KANG PROJECT 》》SOKP★
my recovery is v6.0.1.2
Click to expand...
Click to collapse
You CAN'T ! At least you can't with CWM 6.0.1.2 as its tooooooooooo old. I'll post a proper recovery version
Use PhilZ advanced CWM 6.19.3 as its found HERE

thank you for help..but please
odin 3 dont read the recovery file !! it shown as empty folder ...what prog can solve this???

audi19844 said:
thank you for help..but please
odin 3 dont read the recovery file !! it shown as empty folder ...what prog can solve this???
Click to expand...
Click to collapse
Which file did you use?
the tar.md5 is for ODIN
the.zip is flashable via your actual recovery

LS.xD said:
Which file did you use?
the tar.md5 is for ODIN
the.zip is flashable via your actual recovery
Click to expand...
Click to collapse
the winrar file is on my pc now...i tried to put it via odin..when i choose the file in odin i see nothong to load !!
I TRIED then to flash it via the old recovery i have...from sd zip file ...it makes the steps for instalation of recovery file...then it says finished the instalation *(reboot the recovery )..after reboot i find the old recovery(6.0.1.2) and nothing updated!!

may you Install Teamviewer that I can perform installing the recovery for you?
Sent from my beloved HTC One S using (most time buggy) Tapatalk

Related

[Q] "Installation Aborted" error message in clockwork mod

i go into recovery from rom manager to flash a ROM or a kernel but i keep getting an error saying installation aborted with an open android and a red triangle.
Possibly a bad download. Try checking the MD5 Sum.
Sent from my R800i using xda premium
Can be also an incompatibility with CWM recovery. If you re-download and have problems again, try chaning your recovery.
I unrooted ,locked the boot loader and again rooted installed the twrp recovery still I get the same error .... Even when I download busybox form market it does not install it says I'm not rooted . But i am able to flash kernels but not roms ..
Are you sure that the rom is zipped well?
I can give you answers on how to solve your problem , visit this link .
http://www.neopeek.com/viewtopic.php?t=7281
Skyღ said:
Are you sure that the rom is zipped well?
I can give you answers on how to solve your problem , visit this link .
http://www.neopeek.com/viewtopic.php?t=7281
Click to expand...
Click to collapse
I was wondering if it was zipped well, cause CWM rom signature is disabled, so I tried zipping with WinRAR instead of 7zip but to no avail.
Does the fact that I had to OVERWRITE files in order to modify the updater script change something ? If I understand correctly from the thread you pointed to, META INF lists the files the zip should contain. Since I had to overwrite some, I guess it's normal that install fails, right ?
Damnit! All because I cant get the ray to self identify as ST18i or ST18a but instead I dont know why it says it's a ST18..
This happened to me once, because I wiped my sd card. To bypass this, I erased the first line of the build prop in the rom, so cwm (or twrp) will not check if the device is compatible with the rom.
Clockworkmod
kkmindfreak10 said:
i go into recovery from rom manager to flash a ROM or a kernel but i keep getting an error saying installation aborted with an open android and a red triangle.
Click to expand...
Click to collapse
Try to update or install the last clockworkmod with rom manager. that happen to me with the tmo s3 firts time i root it and install the clockworkmod 5.0.3 then i updated to 6.0.3...... and good to go.
hope work for you
!JORGE! said:
Try to update or install the last clockworkmod with rom manager. that happen to me with the tmo s3 firts time i root it and install the clockworkmod 5.0.3 then i updated to 6.0.3...... and good to go.
hope work for you
Click to expand...
Click to collapse
Having the same problem as him but mine is 6.0.5.0

Upgrade CWM

I rooted my phone using Odin and have CWM V5.8.1.3 touch installed. I am running CM10 Alpha2 and want to install Alpha 3 but the install fails and according to what I've read I need to upgrade to version CWM6011-1 skyrocket zip. CWM V5 was a tar file and CWM6011-1 is a zip file. Im assuming I cant use odin to install V6011-1. What installation method do I use? Is the V6011-1 zip flashable from the sd card? Please point me in the right direction.
Thanks
Mike
26.2man said:
I rooted my phone using Odin and have CWM V5.8.1.3 touch installed. I am running CM10 Alpha2 and want to install Alpha 3 but the install fails and according to what I've read I need to upgrade to version CWM6011-1 skyrocket zip. CWM V5 was a tar file and CWM6011-1 is a zip file. Im assuming I cant use odin to install V6011-1. What installation method do I use? Is the V6011-1 zip flashable from the sd card? Please point me in the right direction.
Thanks
Mike
Click to expand...
Click to collapse
I think I figured it out. Please disregard.
Mike
26.2man said:
I think I figured it out. Please disregard.
Mike
Click to expand...
Click to collapse
Just foe the record in case someone searches:
Install goomanager from market > open > menu > install openrecovery script
Thats for twrp open sourced based cwm.
For cwm 6.0.1.1 simply flash the downloaded zip in the current recovery like u would any rom, and when u reboot, it will be present

[supply] ClockworkMod I905P

Hello, I have a phone with root, I wanted to install ClockworkMod, I tried to install with the Custom mod (Play store), but my phone is not supported.
Do you know where I can find a version of ClockworkMod that works and maybe even a guide on how to install it? How do I back up the official rom?
Thanks!
Install this version via odin
http://forum.xda-developers.com/showthread.php?t=2389671
djeagle said:
Install this version via odin
http://forum.xda-developers.com/showthread.php?t=2389671
Click to expand...
Click to collapse
Thanks bro
No problem bro
djeagle said:
No problem bro
Click to expand...
Click to collapse
I'm sorry to bother you again but I have a problem ... when i click on odin pda md5 tells me is invalid :/ what should I do?
Salved with rename file sorry again

[Q]root must use cwm recovery??

root must use cwm recovery??
cwm recovery must use odin to flash??
anyone have the link of root.zip and cwm.zip ??:crying:
KingKong94 said:
root must use cwm recovery??
cwm recovery must use odin to flash??
anyone have the link of root.zip and cwm.zip ??:crying:
Click to expand...
Click to collapse
use search option or go in android development you will find it
vickyg.coolest said:
use search option or go in android development you will find it
Click to expand...
Click to collapse
give me the root ace plus link can?(>_<)
Check this out...
I'm providing you complete folder of mine which has basic stuffs like custom recoveries, ODIN & root.zip
GALAXY Ace Plus - Basic stuff
- First from above link go into ODIN Software folder & download that software.
- Then from Custom recoveries folder download any one recovery which you like either CWM or TWRAP
(here I assume you know how to flash this custom recovery using ODIN)
- Next go in GALAXY Ace Plus ROOT folder & download RootSGAP.zip
- Place it in your SD Card.
- Boot in CWM
& flash that zip through SD card
- Reboot
- Done... you have rooted SGAP
j.posarekar70 said:
I'm providing you complete folder of mine which has basic stuffs like custom recoveries, ODIN & root.zip
GALAXY Ace Plus - Basic stuff
- First from above link go into ODIN Software folder & download that software.
- Then from Custom recoveries folder download any one recovery which you like either CWM or TWRAP
(here I assume you know how to flash this custom recovery using ODIN)
- Next go in GALAXY Ace Plus ROOT folder & download RootSGAP.zip
- Place it in your SD Card.
- Boot in CWM
& flash that zip through SD card
- Reboot
- Done... you have rooted SGAP
Click to expand...
Click to collapse
What if i dont know how to flash the custom recovery using ODIN ?? Can you teach me ??
JohnnyPanther said:
What if i dont know how to flash the custom recovery using ODIN ?? Can you teach me ??
Click to expand...
Click to collapse
First, Install kies to install drivers properly.
Open ODIN
Connect device to PC using USB Cable in download mode.
Click pda.
Select downloaded recovery file
(Its in .md5 format you have to extract downloaded zip)
Click start
Wait till reboot.
Done.
j.posarekar70 said:
First, Install kies to install drivers properly.
Open ODIN
Connect device to PC using USB Cable in download mode.
Click pda.
Select downloaded recovery file
(Its in .md5 format you have to extract downloaded zip)
Click start
Wait till reboot.
Done.
Click to expand...
Click to collapse
Is it only for Ace Plus or can i use it on other phones ??
JohnnyPanther said:
Is it only for Ace Plus or can i use it on other phones ??
Click to expand...
Click to collapse
ODIN is universal flashing software for all samsung android device.
But for others (recovery n root zip) made for ace plus only don't even give a try on other device
j.posarekar70 said:
ODIN is universal flashing software for all samsung android device.
But for others (recovery n root zip) made for ace plus only don't even give a try on other device
Click to expand...
Click to collapse
Does it take a long time to root ??
j.posarekar70 said:
I'm providing you complete folder of mine which has basic stuffs like custom recoveries, ODIN & root.zip
GALAXY Ace Plus - Basic stuff
- First from above link go into ODIN Software folder & download that software.
- Then from Custom recoveries folder download any one recovery which you like either CWM or TWRAP
(here I assume you know how to flash this custom recovery using ODIN)
- Next go in GALAXY Ace Plus ROOT folder & download RootSGAP.zip
- Place it in your SD Card.
- Boot in CWM
& flash that zip through SD card
- Reboot
- Done... you have rooted SGAP
Click to expand...
Click to collapse
can give me the root.zip link?Can I just use stock recovery flash root??
JohnnyPanther said:
Does it take a long time to root ??
Click to expand...
Click to collapse
around 5-10 sec.
KingKong94 said:
can give me the root.zip link?Can I just use stock recovery flash root??
Click to expand...
Click to collapse
already gave link above but here you go : direct Root.zip : http://www.mediafire.com/Rooting_SGAP.zip
Yup you can use stock recovery too...
j.posarekar70 said:
around 5-10 sec.
already gave link above but here you go : direct Root.zip : http://www.mediafire.com/Rooting_SGAP.zip
Yup you can use stock recovery too...
Click to expand...
Click to collapse
thx guy(*¯︶¯*)
j.posarekar70 said:
around 5-10 sec.
already gave link above but here you go : direct Root.zip : http://www.mediafire.com/Rooting_SGAP.zip
Yup you can use stock recovery too...
Click to expand...
Click to collapse
the cwm recovery must use Odin to flash??can't use stock recovery to flash??
KingKong94 said:
the cwm recovery must use Odin to flash??can't use stock recovery to flash??
Click to expand...
Click to collapse
nope with stock even CWM recovery you can flash only .zip files
where ODIN accepts .MD5 (CWM recovery is in .md5 format)
j.posarekar70 said:
nope with stock even CWM recovery you can flash only .zip files
where ODIN accepts .MD5 (CWM recovery is in .md5 format)
Click to expand...
Click to collapse
i root fail it say Signature vert.... what problem is this??i use stock recovery to flash,cwm recovery have cwm.zip file??if have the file pls giveme the download link,thx!!i can't use computer,because my computer is in hospital (>_<)
KingKong94 said:
i root fail it say Signature vert.... what problem is this??i use stock recovery to flash,cwm recovery have cwm.zip file??if have the file pls giveme the download link,thx!!i can't use computer,because my computer is in hospital (>_<)
Click to expand...
Click to collapse
i...really...didn't know we had a stock recovery....
i flashed cwm through odin......
try cwm 6.0.1.2 and then root again i guess. or as rooting file flash su package
ShadowsDie said:
i...really...didn't know we had a stock recovery....
i flashed cwm through odin......
try cwm 6.0.1.2 and then root again i guess. or as rooting file flash su package
Click to expand...
Click to collapse
can give me the link i want teach my friend?my friend ace plus have the stock recovery

[Q] Problem installing rom by recovery

Well I am new to the forum, and am having a problem, every time I do an update appears an error in recovery from my galaxy core i8262b:
E: unknown volume for path [/ sdcard]
I need some help ...
Let the image of a similar error
That's not even galaxy core you're trying to install the ROM to.
Sent from my GT-I8260
Your mistake : You are flashing with Stock Recovery
Fr0zenMaster said:
Well I am new to the forum, and am having a problem, every time I do an update appears an error in recovery from my galaxy core i8262b:
E: unknown volume for path [/ sdcard]
I need some help ...
Let the image of a similar error
Click to expand...
Click to collapse
Dude root your device first and then install CWM Recovery and then use the CWM Recovery to flash whichever ROM(for your device only) you have.
YOU ARE FLASHING WITH STOCK RECOVERY THERE YOU ARE MAKING MISTAKE
--------------------------------------------------------------------------
Press THANKS if I have helped you!
M_E_G_A_T_R_O_N said:
Dude root your device first and then install CWM Recovery and then use the CWM Recovery to flash whichever ROM(for your device only) you have.
YOU ARE FLASHING WITH STOCK RECOVERY THERE YOU ARE MAKING MISTAKE
--------------------------------------------------------------------------
Press THANKS if I have helped you!
Click to expand...
Click to collapse
I'm trying to do the same with the official ROM, but always of this error. Using CWM Recovery can also install official roms?
Yes!
Fr0zenMaster said:
I'm trying to do the same with the official ROM, but always of this error. Using CWM Recovery can also install official roms?
Click to expand...
Click to collapse
Ya you can install official ROM with CWM Recovery
M_E_G_A_T_R_O_N said:
Ya you can install official ROM with CWM Recovery
Click to expand...
Click to collapse
So yeah, I will install and when finished put my results, thanks for the help friend
This CWM recovery here that galaxy core?
http://forum.xda-developers.com/showthread.php?t=2645964
Fr0zenMaster said:
So yeah, I will install and when finished put my results, thanks for the help friend
This CWM recovery here that galaxy core?
http://forum.xda-developers.com/showthread.php?t=2645964
Click to expand...
Click to collapse
No your link is for higher version of Android, i mean it is for Android 4.3 or later and these versions have not come yet. Although CM11 is out but it is beta version. So better you download BUILD 2 from the following link.
http://forum.xda-developers.com/showthread.php?t=2660261

Categories

Resources