Related
i go into recovery from rom manager to flash a ROM or a kernel but i keep getting an error saying installation aborted with an open android and a red triangle.
Possibly a bad download. Try checking the MD5 Sum.
Sent from my R800i using xda premium
Can be also an incompatibility with CWM recovery. If you re-download and have problems again, try chaning your recovery.
I unrooted ,locked the boot loader and again rooted installed the twrp recovery still I get the same error .... Even when I download busybox form market it does not install it says I'm not rooted . But i am able to flash kernels but not roms ..
Are you sure that the rom is zipped well?
I can give you answers on how to solve your problem , visit this link .
http://www.neopeek.com/viewtopic.php?t=7281
Skyღ said:
Are you sure that the rom is zipped well?
I can give you answers on how to solve your problem , visit this link .
http://www.neopeek.com/viewtopic.php?t=7281
Click to expand...
Click to collapse
I was wondering if it was zipped well, cause CWM rom signature is disabled, so I tried zipping with WinRAR instead of 7zip but to no avail.
Does the fact that I had to OVERWRITE files in order to modify the updater script change something ? If I understand correctly from the thread you pointed to, META INF lists the files the zip should contain. Since I had to overwrite some, I guess it's normal that install fails, right ?
Damnit! All because I cant get the ray to self identify as ST18i or ST18a but instead I dont know why it says it's a ST18..
This happened to me once, because I wiped my sd card. To bypass this, I erased the first line of the build prop in the rom, so cwm (or twrp) will not check if the device is compatible with the rom.
Clockworkmod
kkmindfreak10 said:
i go into recovery from rom manager to flash a ROM or a kernel but i keep getting an error saying installation aborted with an open android and a red triangle.
Click to expand...
Click to collapse
Try to update or install the last clockworkmod with rom manager. that happen to me with the tmo s3 firts time i root it and install the clockworkmod 5.0.3 then i updated to 6.0.3...... and good to go.
hope work for you
!JORGE! said:
Try to update or install the last clockworkmod with rom manager. that happen to me with the tmo s3 firts time i root it and install the clockworkmod 5.0.3 then i updated to 6.0.3...... and good to go.
hope work for you
Click to expand...
Click to collapse
Having the same problem as him but mine is 6.0.5.0
Hi,
i was using cm10.1 which was running fine, i reloaded the stock jellybean 4.1.1 and now the tablet wont go beyond the flashing samsung boot screen?
i tried going back to ICS 4.0.4
I loaded these via the odin method, what i need is cwm but the tablet is stuck at the bootscreen, any kind person out there get any ideas what i can do
thanks
gazmon
I got the same problem with u~"~
I didn't flash anything but it stucks at that bootscreen.
I can enter download mode but not cmw also
How can we do....~"~
SAMHUI94 said:
I got the same problem with u~"~
I didn't flash anything but it stucks at that bootscreen.
I can enter download mode but not cmw also
How can we do....~"~
Click to expand...
Click to collapse
Sorted it now
If stuck at bootscreen turn off device, then hold power button and volume up to enter standard android recovery mode, then select clear dalvic and clear cache, reboot and that sorted it
i discovered that i can enter cwm recovery
But i made a full wipe, it still doesn't help.
Do i need to flash in offical rom?? Where can i find hk's rom??
Thx and please help
SAMHUI94 said:
i discovered that i can enter cwm recovery
But i made a full wipe, it still doesn't help.
Do i need to flash in offical rom?? Where can i find hk's rom??
Thx and please help
Click to expand...
Click to collapse
If you still have CWM recovery, then your attempt to ODIN the stock ROM did not work.
What version CWM do you have?
Find the stock ROMs here, but make sure your model is p3100 not P3113 or similar.
http://www.sammobile.com/firmware/?page=3&model=GT-P3113&pcode=0&os=1&type=3#firmware
DigitalMD said:
If you still have CWM recovery, then your attempt to ODIN the stock ROM did not work.
What version CWM do you have?
Find the stock ROMs here, but make sure your model is p3100 not P3113 or similar.
http://www.sammobile.com/firmware/?page=3&model=GT-P3113&pcode=0&os=1&type=3#firmware
Click to expand...
Click to collapse
I didn't use ODIN to recover. I just had a full wipe but it doesn't work.
I am having CWM on V6.0.1.0
Is the following process correct?
Open Odin-> Tablet in download mode-> Connect-> Choose the downloaded zip in PDA column
THX !!!
SAMHUI94 said:
I didn't use ODIN to recover. I just had a full wipe but it doesn't work.
I am having CWM on V6.0.1.0
Is the following process correct?
Open Odin-> Tablet in download mode-> Connect-> Choose the downloaded zip in PDA column
THX !!!
Click to expand...
Click to collapse
almost
you can;'t use a zip file in odin
you have to extract the contents and point to the .tar.md5 file
example P3100ZTOLP3_P3100UBLP7_HOME.tar.md5
DigitalMD said:
almost
you can;'t use a zip file in odin
you have to extract the contents and point to the .tar.md5 file
example P3100ZTOLP3_P3100UBLP7_HOME.tar.md5
Click to expand...
Click to collapse
Thx for your kindly help!
I will do this after i charged my tab2.
Hope I can boot my tab
---------- Post added at 01:42 AM ---------- Previous post was at 12:48 AM ----------
DigitalMD said:
almost
you can;'t use a zip file in odin
you have to extract the contents and point to the .tar.md5 file
example P3100ZTOLP3_P3100UBLP7_HOME.tar.md5
Click to expand...
Click to collapse
I succeed!!! Thx:good:
One more question here
Can I upgrade the android version by using odin with newest firmware?
Thats using 4.1 firmware with the same method I've done.
Sorry for my poor english.
NEW VERSION 20/08/13
5-August's fifth official stock Android 4.2.2 firmware of the Galaxy S4 E300L just released by samsung holding the build number MH1 which you can get directly from Kies, or you can get it from the following link prerooted:
download link: https://mega.co.nz/#!oEsnWCzD!MCnOzBGm7rSRT6f5oJirSiqKW25PNDWUxKySENo9UKg
and it's about: (2.55 GB)
4-The forth official stock firmware of the galaxy S4 E300L has been released by samsung , you can download directly via Kies or pre-rooted via the following download link next to the new stock firmwares also rooted of the E300s/E300k:
OLD VERSION:
the firmware version is : JDQ39.E300LKLUAMG2
download link: http://bvlgarian.tistory.com/546 2.56GB
3-the third official stock firmware update of the Korean version of the Galaxy S4 E300L has been released and here's the download link,
OLD VERSION: 19/06/2013
the build number is: JDQ39.E300LKLUAMF4
http://pan.baidu.com/share/link?shareid=3632022171&uk=3456408501
and to root it follow the same method described in the 2nd post.
OLD VERSION: 5/22/2013
2-Comes with new kernel ME7, a lot of improvements has been noticed in this version including the battery life as well as the signal strength, here is the download link:
https://docs.google.com/file/d/0B_rv_z5Y1oGaWktkQjVoYUl4MGM/edit
1-OLD VERSION 5/19/2013
http://pan.baidu.com/share/link?shareid=479182&uk=3708084995
the file size is 1.728 GB,
enjoy!
Root GS4 E300L Both New Stock Firmwares
To root the GS4 E300L download the following Zip file and extract it,
http://www.mediafire.com/download/1vdlbejjekn97ev/Root_SHV-E300L.zip
flash cofface_I9500_cwm_recovery_en_new.tar using odin, and when the phone reboots copy both files: stupid_root.zip & Superuser2.apk to your internal storage and then reboot to recovery holding vol-up + the home and power buttons, the phone will reboot to CWM, then choose from the menu: install zip from sdcard, and then choose zip from sdcard, and flash stupid_root.zip, when you're done flashing reboot, after booting up go to your device's internal storage and install suppersu2.apk, now your root!
enjoy!
Would you happen to know how to get rid of the Fail to register please contact provider error: From what I know the phone should to be unlocked. Will be using the Rogers Wireless Canada.
clenh said:
Would you happen to know how to get rid of the Fail to register please contact provider error: From what I know the phone should to be unlocked. Will be using the Rogers Wireless Canada.
Click to expand...
Click to collapse
your phone needs to be sim unlocked,
Why is the kernel Linux 3.4.5 and i9505 kernel is 3.4.0:crying:
Aerys said:
Why is the kernel Linux 3.4.5 and i9505 kernel is 3.4.0:crying:
Click to expand...
Click to collapse
I think the S600 doesn't have the drivers to support the 3.4.5 version
Hi! Mod or admin on this topic cant i ask something is about the MF4 and MF7 which one is better ? MF7 new than MF4 sorry my bad english i from viet nam ..thank you so much
SnowFakeSev said:
Hi! Mod or admin on this topic cant i ask something is about the MF4 and MF7 which one is better ? MF7 new than MF4 sorry my bad english i from viet nam ..thank you so much
Click to expand...
Click to collapse
Where did you get the MF7 rom? as far as i know the roms are ME6, ME7 and MF4
Jaistah said:
Where did you get the MF7 rom? as far as i know the roms are ME6, ME7 and MF4
Click to expand...
Click to collapse
Sorry i cant see that.hihi.oh which one is better ?ME7 or MF4 thank everyone.
SnowFakeSev said:
Sorry i cant see that.hihi.oh which one is better ?ME7 or MF4 thank everyone.
Click to expand...
Click to collapse
How do I root my phone I tried the method here it failed...
Also how do I flash ME7 if I cant install a custom recovery?
Ok so whenever I try flashing CWM to root my phone it says it works in Odin BUT
The phone wont boot in CWM. instead what happens is it says something about command error and takes me to the default Android recovery....
I read that there were some updates made by Samsung which made these methods not work.
I found the below tutorial which works for the GT-I9500
http://www.ibtimes.co.uk/articles/47...-jellybean.htm
Will this work on the SHV-E300L since as the post says that some of the GT-I9500 recoveries work on the Korean Variants?
Jaistah said:
Where did you get the MF7 rom? as far as i know the roms are ME6, ME7 and MF4
Click to expand...
Click to collapse
i have E300L with build no. JDQ39.E300LKLUAMG2. i guess its neither ME6, ME7 or MF4. so is this the latest firmware? i have upgraded it today via software update. it downloaded around 347mb. no i need to root it. Is mine the latest firmware or the one provided in the op?
the one you got updated through kies is the latest, check out the 1st post, now you can download the latest version pre-rooted.
enjoy!
yakie47 said:
the one you got updated through kies is the latest, check out the 1st post, now you can download the latest version pre-rooted.
enjoy!
Click to expand...
Click to collapse
where you able to flash the E300L pre-rooted room Yakie? im getting a invalid MD5 hash error in Odin
Jaistah said:
where you able to flash the E300L pre-rooted room Yakie? im getting a invalid MD5 hash error in Odin
Click to expand...
Click to collapse
hi jaistah,
just delete .md5 to be just .tar similar to the way it is in the picture down below, then reflash it and sure it will work.
yakie47 said:
hi jaistah,
just delete .md5 to be just .tar similar to the way it is in the picture down below, then reflash it and sure it will work.
Click to expand...
Click to collapse
Got it thanks bro!
yakie47 said:
To root the GS4 E300L download the following Zip file and extract it,
http://www.mediafire.com/download/1vdlbejjekn97ev/Root_SHV-E300L.zip
flash cofface_I9500_cwm_recovery_en_new.tar using odin, and when the phone reboots copy both files: stupid_root.zip & Superuser2.apk to your internal storage and then reboot to recovery holding vol-up + the home and power buttons, the phone will reboot to CWM, then choose from the menu: install zip from sdcard, and then choose zip from sdcard, and flash stupid_root.zip, when you're done flashing reboot, after booting up go to your device's internal storage and install suppersu2.apk, now your root!
enjoy!
Click to expand...
Click to collapse
i have followed this step. had success with odin flash. but i when i boot into recovery there is no "install zip from sd card" option. what have i missed?
mohaimed said:
i have followed this step. had success with odin flash. but i when i boot into recovery there is no "install zip from sd card" option. what have i missed?
Click to expand...
Click to collapse
it seems like the CWM doesn't install when you flash it with odin, i advise you to download the latest version and flash it, it's already rooted.
yakie47 said:
it seems like the CWM doesn't install when you flash it with odin, i advise you to download the latest version and flash it, it's already rooted.
Click to expand...
Click to collapse
Yeah, had to install cwm manually but i got the touch version.
Sent from my SHV-E300L using xda premium
can we play with some custom kernels and roms for our E300L anytime soon?
My E300L runs in the firmware E300LKLUAMG2 with the baseband E300LKLUAMF2. is this the latest?
root must use cwm recovery??
cwm recovery must use odin to flash??
anyone have the link of root.zip and cwm.zip ??:crying:
KingKong94 said:
root must use cwm recovery??
cwm recovery must use odin to flash??
anyone have the link of root.zip and cwm.zip ??:crying:
Click to expand...
Click to collapse
use search option or go in android development you will find it
vickyg.coolest said:
use search option or go in android development you will find it
Click to expand...
Click to collapse
give me the root ace plus link can?(>_<)
Check this out...
I'm providing you complete folder of mine which has basic stuffs like custom recoveries, ODIN & root.zip
GALAXY Ace Plus - Basic stuff
- First from above link go into ODIN Software folder & download that software.
- Then from Custom recoveries folder download any one recovery which you like either CWM or TWRAP
(here I assume you know how to flash this custom recovery using ODIN)
- Next go in GALAXY Ace Plus ROOT folder & download RootSGAP.zip
- Place it in your SD Card.
- Boot in CWM
& flash that zip through SD card
- Reboot
- Done... you have rooted SGAP
j.posarekar70 said:
I'm providing you complete folder of mine which has basic stuffs like custom recoveries, ODIN & root.zip
GALAXY Ace Plus - Basic stuff
- First from above link go into ODIN Software folder & download that software.
- Then from Custom recoveries folder download any one recovery which you like either CWM or TWRAP
(here I assume you know how to flash this custom recovery using ODIN)
- Next go in GALAXY Ace Plus ROOT folder & download RootSGAP.zip
- Place it in your SD Card.
- Boot in CWM
& flash that zip through SD card
- Reboot
- Done... you have rooted SGAP
Click to expand...
Click to collapse
What if i dont know how to flash the custom recovery using ODIN ?? Can you teach me ??
JohnnyPanther said:
What if i dont know how to flash the custom recovery using ODIN ?? Can you teach me ??
Click to expand...
Click to collapse
First, Install kies to install drivers properly.
Open ODIN
Connect device to PC using USB Cable in download mode.
Click pda.
Select downloaded recovery file
(Its in .md5 format you have to extract downloaded zip)
Click start
Wait till reboot.
Done.
j.posarekar70 said:
First, Install kies to install drivers properly.
Open ODIN
Connect device to PC using USB Cable in download mode.
Click pda.
Select downloaded recovery file
(Its in .md5 format you have to extract downloaded zip)
Click start
Wait till reboot.
Done.
Click to expand...
Click to collapse
Is it only for Ace Plus or can i use it on other phones ??
JohnnyPanther said:
Is it only for Ace Plus or can i use it on other phones ??
Click to expand...
Click to collapse
ODIN is universal flashing software for all samsung android device.
But for others (recovery n root zip) made for ace plus only don't even give a try on other device
j.posarekar70 said:
ODIN is universal flashing software for all samsung android device.
But for others (recovery n root zip) made for ace plus only don't even give a try on other device
Click to expand...
Click to collapse
Does it take a long time to root ??
j.posarekar70 said:
I'm providing you complete folder of mine which has basic stuffs like custom recoveries, ODIN & root.zip
GALAXY Ace Plus - Basic stuff
- First from above link go into ODIN Software folder & download that software.
- Then from Custom recoveries folder download any one recovery which you like either CWM or TWRAP
(here I assume you know how to flash this custom recovery using ODIN)
- Next go in GALAXY Ace Plus ROOT folder & download RootSGAP.zip
- Place it in your SD Card.
- Boot in CWM
& flash that zip through SD card
- Reboot
- Done... you have rooted SGAP
Click to expand...
Click to collapse
can give me the root.zip link？Can I just use stock recovery flash root??
JohnnyPanther said:
Does it take a long time to root ??
Click to expand...
Click to collapse
around 5-10 sec.
KingKong94 said:
can give me the root.zip link？Can I just use stock recovery flash root??
Click to expand...
Click to collapse
already gave link above but here you go : direct Root.zip : http://www.mediafire.com/Rooting_SGAP.zip
Yup you can use stock recovery too...
j.posarekar70 said:
around 5-10 sec.
already gave link above but here you go : direct Root.zip : http://www.mediafire.com/Rooting_SGAP.zip
Yup you can use stock recovery too...
Click to expand...
Click to collapse
thx guy(*¯︶¯*)
j.posarekar70 said:
around 5-10 sec.
already gave link above but here you go : direct Root.zip : http://www.mediafire.com/Rooting_SGAP.zip
Yup you can use stock recovery too...
Click to expand...
Click to collapse
the cwm recovery must use Odin to flash??can't use stock recovery to flash??
KingKong94 said:
the cwm recovery must use Odin to flash??can't use stock recovery to flash??
Click to expand...
Click to collapse
nope with stock even CWM recovery you can flash only .zip files
where ODIN accepts .MD5 (CWM recovery is in .md5 format)
j.posarekar70 said:
nope with stock even CWM recovery you can flash only .zip files
where ODIN accepts .MD5 (CWM recovery is in .md5 format)
Click to expand...
Click to collapse
i root fail it say Signature vert.... what problem is this??i use stock recovery to flash,cwm recovery have cwm.zip file??if have the file pls giveme the download link,thx!!i can't use computer,because my computer is in hospital (>_<)
KingKong94 said:
i root fail it say Signature vert.... what problem is this??i use stock recovery to flash,cwm recovery have cwm.zip file??if have the file pls giveme the download link,thx!!i can't use computer,because my computer is in hospital (>_<)
Click to expand...
Click to collapse
i...really...didn't know we had a stock recovery....
i flashed cwm through odin......
try cwm 6.0.1.2 and then root again i guess. or as rooting file flash su package
ShadowsDie said:
i...really...didn't know we had a stock recovery....
i flashed cwm through odin......
try cwm 6.0.1.2 and then root again i guess. or as rooting file flash su package
Click to expand...
Click to collapse
can give me the link i want teach my friend？my friend ace plus have the stock recovery
Hi..from recovery in my s2 i1900g and choose the rom to install...an error messege appears it says { E:Error in /tmp/sideload/package.zip (status7).
I hope u will help me
Thank you very much
anyone can help me please?
audi19844 said:
Hi..from recovery in my s2 i1900g and choose the rom to install...an error messege appears it says { E:Error in /tmp/sideload/package.zip (status7).
I hope u will help me
Thank you very much
Click to expand...
Click to collapse
Which rom do you want to install? Which firmware / recovery version is actually installed on the phone?
LS.xD said:
Which rom do you want to install? Which firmware / recovery version is actually installed on the phone?
Click to expand...
Click to collapse
this is the rom i want to install
http://forum.xda-developers.com/galaxy-s2/development/i9100g-kk-4-4-2-t2729696
★SONIC OPEN KANG PROJECT 》》SOKP★
my recovery is v6.0.1.2
audi19844 said:
this is the rom i want to install
http://forum.xda-developers.com/galaxy-s2/development/i9100g-kk-4-4-2-t2729696
★SONIC OPEN KANG PROJECT 》》SOKP★
my recovery is v6.0.1.2
Click to expand...
Click to collapse
You CAN'T ! At least you can't with CWM 6.0.1.2 as its tooooooooooo old. I'll post a proper recovery version
Use PhilZ advanced CWM 6.19.3 as its found HERE
thank you for help..but please
odin 3 dont read the recovery file !! it shown as empty folder ...what prog can solve this???
audi19844 said:
thank you for help..but please
odin 3 dont read the recovery file !! it shown as empty folder ...what prog can solve this???
Click to expand...
Click to collapse
Which file did you use?
the tar.md5 is for ODIN
the.zip is flashable via your actual recovery
LS.xD said:
Which file did you use?
the tar.md5 is for ODIN
the.zip is flashable via your actual recovery
Click to expand...
Click to collapse
the winrar file is on my pc now...i tried to put it via odin..when i choose the file in odin i see nothong to load !!
I TRIED then to flash it via the old recovery i have...from sd zip file ...it makes the steps for instalation of recovery file...then it says finished the instalation *(reboot the recovery )..after reboot i find the old recovery(6.0.1.2) and nothing updated!!
may you Install Teamviewer that I can perform installing the recovery for you?
Sent from my beloved HTC One S using (most time buggy) Tapatalk