HOW TO FLASH CUSTOM RECOVERY ON Q NOAIR A30 (Qmobile).
DISCLIMER:
If you somehow manage to damage your phone all responsibility is on you not me. Here I want to declare that I did not developed these tools I just combined them and made a tutorial.
MOTIVE:
Few days back I purchased a Qmobile Noair A30 and realized that there is no method on internet for flashing custom recovery on it so I decided to discover it and finally succeeded which I am going to share today. So let’s begin.
REQUIREMENTS:
A computer with windows operating system.
Q Noair A30 (Qmobile).
A USB data cable.
Q Noair A30 USB drivers.
SP Flash Tool.
Custom Recovery & Scatter file Download from here
NOTE:
If your phone is dead I mean if bricked, then fallow my This tutorial.
So let’s begin.
1. Download and extract Q Noair A30 Recovery Package at your desktop or any other comfortable place there you will find three folders.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2. Open Q Noair A30 USB drivers folder & run installDriver .exe.
3. Open SP Flash Tool folder & run flash tool .exe.
4. This screen will appear click on Scatter-loading.
5. Now this screen will appear select MT6572_Android_scatter file from Recovery_&_Scatter folder.
6. Now this screen will appear check the little box and click on word RECOVERY before it.
7. Now this screen will appear select recovery.img file from Recovery_&_Scatter folder.
8. Now this screen will appear ignore the warning and click yes.
9. Now this screen will appear power off your phone and remover its battery for few seconds, click on Download and immediately connect your phone to PC via USB cable in power off condition and wait for flashing.
10. Now this screen will appear with a green circle it means that you have flashed successfully custom recovery to your phone.
Congratulations!!!!!!!!!!
Now go to recovery by pressing vol+ and power button and feel free.
If I somehow helped you tu phir thanx tu banta hai BOOSSSSS... Please hit Thanks .
Nice sharing
Imran Pirzada said:
HOW TO FLASH CUSTOM RECOVERY ON Q NOAIR A30 (Qmobile).
DISCLIMER:
If you somehow manage to damage your phone all responsibility is on you not me. Here I want to declare that I did not developed these tools I just combined them and made a tutorial.
MOTIVE:
Few days back I purchased a Qmobile Noair A30 and realized that there is no method on internet for flashing custom recovery on it so I decided to discover it and finally succeeded which I am going to share today. So let’s begin.
REQUIREMENTS:
A computer with windows operating system.
Q Noair A30 (Qmobile).
A USB data cable.
Q Noair A30 USB drivers.
SP Flash Tool.
Custom Recovery & Scatter file Download from here
NOTE:
If your phone is dead I mean if bricked, then fallow my This tutorial.
So let’s begin.
1. Download and extract Q Noair A30 Recovery Package at your desktop or any other comfortable place there you will find three folders.
2. Open Q Noair A30 USB drivers folder & run installDriver .exe.
3. Open SP Flash Tool folder & run flash tool .exe.
4. This screen will appear click on Scatter-loading.
5. Now this screen will appear select MT6572_Android_scatter file from Recovery_&_Scatter folder.
6. Now this screen will appear check the little box and click on word RECOVERY before it.
7. Now this screen will appear select recovery.img file from Recovery_&_Scatter folder.
8. Now this screen will appear ignore the warning and click yes.
9. Now this screen will appear power off your phone and remover its battery for few seconds, click on Download and immediately connect your phone to PC via USB cable in power off condition and wait for flashing.
10. Now this screen will appear with a green circle it means that you have flashed successfully custom recovery to your phone.
Congratulations!!!!!!!!!!
Now go to recovery by pressing vol+ and power button and feel free.
If I somehow helped you tu phir thanx tu banta hai BOOSSSSS... Please hit Thanks .
Click to expand...
Click to collapse
dear sir my q mobile a30 is hanged on startup logo i tried to factory reset but the problem was same....need your help...
Related
i m not responcible for any damages
do at your own risk
read all twice before flashing
til date i have flashed more then 10 times by this method
Make sure that you read everything carefully and know what you are doing.
Don't blame me for any damage that may occur on your phone.
-----------------------------------------------------------------------------------------
-do not disconnect mobile while flashing bettery must be more then 50%
-pc/laptop must not stop while flashing
-close other progames running in your pc/laptop for better speed-discoonect net
-images given here for learning purpose for better understanding of all steps
-you can practice till step 3 before all steps
-there is tutorial inside downloaded file by micromax do not use it(stictly -they given image for firmware upgread and you have to click download button)
---------------------------------------------------------------------------
What's needed:
1)USB data cable
its there with your chrgere right!!!
2)MediaTek USB VCOM drivers
-go to settings-developer option - click on usb debuging mode ok
-now connect your mobile with your pc/laptop and driver containg drive created open it and install your desire 32 bit or 64 bit driver(run as admin)
---restart your pc with phone connected
---to check is your driver instal or not go to usb teether option and apply it. if internet surfing is possible then you are ready to go---(must check)
3)SP Flash Tool and flashing files
-- is provided with in download file
-- 2 rar files
----make new folder and extract both files in new folder
--so threre is two folder one for sp flash tool and one containing all flashing files (warning =do not rename this folder)
--------------------------------------------------------------------------------------------------------------------
1)open spflsh tool
First of all open SP Flash Tool, then click Scatter-loading button to load the correct scatter file
(here it is named MT6577_Android_scatter_emmc.txtfind in download file)
all files will be loded
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2)choose Option-USB Model,click USB Model,
Choose Option- DownLoad All-Speed-High speed click High Speed
3)now connect your fone with micro usb data cable (do not connect to pc now just only fone side connect)
Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
now fone is turn off with data cable coonect with fone side only
4) now do some speedy work
press download and connect immediatly to pc (same usb port when you use while instaling the driver)
The process will start and a red progress bar will appear.
After the red progress bar is complete(for 1 sec)
there will appear a purple progress bar(for1 sec
.
and thene yellow bar(for1 min to 5 min)
When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
5)You can now safely disconnect your phone and turn it on. The process ends here
remove your mobile and start it will take 2 min to first boot
enjoy!!!!!!!!
-----------------------------------------------
download links
---------------------------------
what's new in updated stock v2:
Auto rotation sensor bit improved
- internal memory now increased to 1.58 ,rest is internal card 1.12 gb
- now u can install apps in external memory card default.
battery improve.
true colour.
GPS fix.
better performance.
now install pass on memory card.
and lots more finding.
updated smooth scrolling.
--------------------------------
in downloaded file you will get sp flash tool and flashing files
make new folder and extract all 2 rar files in new folder
----------------------------------
stock rom version 2 links resume
stock rom version 2 mirror links resume
--------------------------------
reserved
i have flashed many times and found no need to remove battery just make sure all drivers are installed in pc even in mobile off mode also. then when u click upgrade firmware simply switch off ur mobile u feel the vibration after 5 sec of switch then simply connect it to usb cable thats all.
Error on Sp tool
I am getting this error I dont know what to do please help.
Please refer to the screen shot
deadmantfa said:
I am getting this error I dont know what to do please help.
Please refer to the screen shot
Click to expand...
Click to collapse
drivers not installed properly. install them again.
deadmantfa said:
I am getting this error I dont know what to do please help.
Please refer to the screen shot
Click to expand...
Click to collapse
Your vcom drivers not installed properly.....
Sent from my Micromax A110 using xda premium
mmx a110
Dibbyo123 said:
Your vcom drivers not installed properly.....
Sent from my Micromax A110 using xda premium
Click to expand...
Click to collapse
dead on sp tool error 4010 after red line no preloader driver plzz help me
Let's take everything over to this thread: http://forum.xda-developers.com/showthread.php?t=2167244
So, for installing TWRP you need to follow these steps:
IMP:
[*] You need not to have rooted phone.
[*] This is for MMX A89 ONLY! Don't use for other phones as you can brick it!
[*] Although, this rom has been tested, I'm not responsible for any damage!
Prerequisites :
1. MTK6577 Drivers (Thanks to Bhardik)
2. SP Flash Tool (Thanks to Bhardik)
3. TWRP Itself! (Thanks to yuweng
Now we are ready to Flash!
[IMPORTANT : DISCONNECT YOUR PHONE BEFORE STARTING THIS TUTORIAL]
1. First of all, Download all of the packages listed above.
2. Install Drivers and Extract SP Flash Tools & TWRP image.
3. Now open extracted SP Flash Tool folder and run Flash_tool.exe
4. Click on "Scatter-loading" button which is on the right side below Downloading Agent. A new window will open. Browse to the extracted "TWRP for MMX A89-dan.man" folder and select "MT6577_Android_scatter_emmc.txt" file.
Refer this screenshot for more help:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5. Flash tool will populate the Map file on the application window. You will see multiple entries. Uncheck all entries except for RECOVERY.
6. [Skip this step if recover.img is already selected] Now to select recovery file, click on recovery and select recovery.img file.
7. Now click on "Download". Warning message will occur, but ignore that and click Yes.
7. You will see in the status bar below "Searching", now connect your phone (with battery inserted + Press and Hold Volume Up Key) via the USB cable. Keep those buttons holding while the process is completing.
8. Wait for the process to finish and then you will get a window showing green circle.
Congrats You have flashed TWRP Recovery v2.3.2.3 ! Enjoy!
Note: If you get any error in SP Flash Tool, then recheck your MTK drivers installation or manually install them through device manager.
Click to expand...
Click to collapse
-------------
Booting into TWRP Recovery v2.3.2.3 is the same as in the stock recovery. Switch on the phone with "Volume Up" and "Power" button Pressed. The Phone will boot into TWRP Recovery v2.3.2.3!
Here's a screenshot of TWRP working on my A89 :
-------------
CREDITS GOES TO YUWENG & BHARDIK :highfive:
All Credit goes to yuweng for creating the ROM and BHARDIK who has made CWM for A89 and helped compiling this tutorial.
And GREAT thanks to the Russian Master Shifu Javum, as he is the one that compile TWRP for our MT6577... :good:
Click to expand...
Click to collapse
dan.man said:
So, for installing TWRP you need to follow these steps:
IMP:
[*] You need not to have rooted phone.
[*] This is for MMX A89 ONLY! Don't use for other phones as you can brick it!
[*] Although, this rom has been tested, I'm not responsible for any damage!
Prerequisites :
1. MTK6577 Drivers (Thanks to Bhardik)
2. SP Flash Tool (Thanks to Bhardik)
3. TWRP Itself! (Thanks to yuweng
Now we are ready to Flash!
[IMPORTANT : DISCONNECT YOUR PHONE BEFORE STARTING THIS TUTORIAL]
1. First of all, Download all of the packages listed above.
2. Install Drivers and Extract SP Flash Tools & TWRP image.
3. Now open extracted SP Flash Tool folder and run Flash_tool.exe
4. Click on "Scatter-loading" button which is on the right side below Downloading Agent. A new window will open. Browse to the extracted "TWRP for MMX A89-dan.man" folder and select "MT6577_Android_scatter_emmc.txt" file.
Refer this screenshot for more help:
5. Flash tool will populate the Map file on the application window. You will see multiple entries. Uncheck all entries except for RECOVERY.
6. [Skip this step if recover.img is already selected] Now to select recovery file, click on recovery and select recovery.img file.
7. Now click on "Download". Warning message will occur, but ignore that and click Yes.
7. You will see in the status bar below "Searching", now connect your phone (with battery inserted + Press and Hold Volume Up Key) via the USB cable. Keep those buttons holding while the process is completing.
8. Wait for the process to finish and then you will get a window showing green circle.
Congrats You have flashed TWRP Recovery v2.3.2.3 ! Enjoy!
-------------
Booting into TWRP Recovery v2.3.2.3 is the same as in the stock recovery. Switch on the phone with "Volume Up" and "Power" button Pressed. The Phone will boot into TWRP Recovery v2.3.2.3!
Here's a screenshot of TWRP working on my A89 :
-------------
Click to expand...
Click to collapse
I use this its awesome
Sir I have rooted my phone micromax q336 with kingroot but unable to flash twrp or any other custom recovery I am not having a pc ko please somebody
Helo XDA..
this time I would like to share to all of you a tools that called MHF(Mini Handy Flashtool)
this tools made to Flash/Restore your backups of System/data/hidden partitions of your phone, it just like Fastboot restore with more UF UI. :good:
this is made by Andrewidya so thanks to him. :good:
oke lets start.
1. Download MHF in the attachment bellow
2. Install MHF
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3. Open MHF from folder inside you installed MHF
4. Begin MHF
5. Choose which partition in partition box and choose the backup partition in browse box (this chase i choose to restore my system backup)
6. Check USB Debugging mode in your phone and connect your phone to PC
7. Click Bootloader mode to change your phone into Bootloader mode
8. When your phone ready to flash(in bootloader screen) then klik start flash and choose OK
9. Wait the proccess till there is a twice done(see the pic), click Boot Phone Up
10. Thats it! you may exit
:highfive:
View attachment MHFSetup.zip
USB mode not working
i flashed my Fire xt 530 with Ice_Cream_Jelly-V2 by aweosomeabhijeet. And now when i'm trying to flash any other ROM the phn is not being detected by my Computer. Its only getting charged when m connecting it with the PC. USB debugging or even Mass storages also does not work. Pls help....:crying:
I've even tried debricking it !! Pls help
Same for me tooo. My phone is not detected by pc... What should i do...
Sent from my GT-S5360 using xda app-developers app
please try to update your driver. download Motorola Device Manager.
Problem: NO Bootloader
zhalx said:
Helo XDA..
this time I would like to share to all of you a tools that called MHF(Mini Handy Flashtool)
this tools made to Flash/Restore your backups of System/data/hidden partitions of your phone, it just like Fastboot restore with more UF UI. :good:
this is made by Andrewidya so thanks to him. :good:
oke lets start.
1. Download MHF in the attachment bellow
2. Install MHF
3. Open MHF from folder inside you installed MHF
4. Begin MHF
5. Choose which partition in partition box and choose the backup partition in browse box (this chase i choose to restore my system backup)
6. Check USB Debugging mode in your phone and connect your phone to PC
7. Click Bootloader mode to change your phone into Bootloader mode
8. When your phone ready to flash(in bootloader screen) then klik start flash and choose OK
9. Wait the proccess till there is a twice done(see the pic), click Boot Phone Up
10. Thats it! you may exit
:highfive:
View attachment 1873322
Click to expand...
Click to collapse
AS per ur instructions i did the same...flash spain rom root then cwm installed..then when i open MHF there is no starting adb server and then when i press bootloader mode nothing happens...i even pressd camera button+vol down+power please help...
pg4 said:
AS per ur instructions i did the same...flash spain rom root then cwm installed..then when i open MHF there is no starting adb server and then when i press bootloader mode nothing happens...i even pressd camera button+vol down+power please help...
Click to expand...
Click to collapse
Download MOTOROLA DEVICE MANAGER first, install it on your pc. then please retry.
*****Root with SPFT Flash Tool Method*****
for iBerry Auxus One
[EASY ROOT METHOD]
Guys. Now we have our own first Root Method for AUXUS ONE STOCK ROM.
This method is successfully tested by me on Windows 7.
For more help visit this FB page too.
https://www.facebook.com/groups/AuxusOne/
Installation Instructions
Warning: Do at your own risk. Disconnection due to poor cable or Electricity Supply failure can still brick your phone beyond repair. This also breaches warranty of your phone. I am not responsible for any damages.
Disable Antivirus so that it cannot interfere with the flashing process
1) Download flashable zip file named UPDATE-SuperSU-v2.40.zip and save in root of your SDCard
2) Download and extract the Auxus ONE CWM Recovery Flash Package on desktop or anywhere on your pc.
Install Phone Driver (From the Driver folder you have just extracted).
3) Download and Install ADB Driver Installer for Windows (important) while installing connect phone to pc and let is recognize .
After driver installation is done disconnect phone from pc and reboot your pc.
4) Run as Administrator the "Flash_Tool.exe" from SPTools folder inside that folder you extracted.
5) Keep only One File checked (selected) as shown in following image (Recovery.img). If options are not seen then click on "Scatter-loading" button at top-right side and select "One_MT6592_Android_scatter.txt" file from extracted folder. Now be sure only one options (RECOVERY.IMG) selected as mentioned in following image. Unselect all other options.
Now PRESS "Download" button at top.
6) Remove battery and memory card from phone and connect PHONE to pc with usb cable. Now pc should recognize phone and flashing should start in a minute. Look at process bar in image below. WAIT WITH PATIENCE.
After flashing is done, the GREEN tick mark will be shown as shown in image below.
7) Now close program on pc and remove cable, Insert Battery and start phone in RECOVERY mode.
To start phone in recovery mode press "VOLUME UP" button and "POWER" when Auxus Logo appears release "POWER" button keeping "VOLUME UP" button pressed until phone starts in CWM Recovery mode.
8) Important: Now install/flash "UPDATE-SuperSU-v2.40.zip" in Recovery mode and Reboot phone in system (normal) mode
Done. Enjoy Press :good: thanks if you liked my work.
IMPORTANT: The package also contains original Stock Recovery named recovery_org_stock.img. If you want to flash back to original company stock recovery, then select this file in flashing tool (Click recovery line and select this file) and then flash.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Auxus One Unroot Process
For Auxus One Unroot Process Follow the Below Steps
1. Open SuperSu app in your mobile >Setting > Unroot. (Phone will restart and SuperSu & Su binaries will be uninstalled)
2. Flash Stock Recovery by following above root guide from step 1-6 (leave drivers installation part in case drivers are already installed).
3. In above step 5, select recovery_org_stock.img instead of recovery.img file
Thats all, now your phone is unrooted and you can do OTA Update.
Press Thanks button if you like this post!
--- Post reserved for stock recovery process----
fix heating problem help
Dear all pls help me how can i fix heating problem Iberry Auxus One
I have taken the auxus one too , is there any seperate forum for auxus one by any chance ?
rohail009 said:
I have taken the auxus one too , is there any seperate forum for auxus one by any chance ?
Click to expand...
Click to collapse
There is an group for Auxus One on fb for all types of queries, reviews, development related stuff
https://www.facebook.com/groups/AuxusOne/
Kaymart said:
Dear all pls help me how can i fix heating problem Iberry Auxus One
Click to expand...
Click to collapse
Under clock its cpu speed
amarbunty said:
For Auxus One Unroot Process Follow the Below Steps
1. Open SuperSu app in your mobile >Setting > Unroot. (Phone will restart and SuperSu & Su binaries will be uninstalled)
2. Flash Stock Recovery by following above root guide from step 1-6 (leave drivers installation part in case drivers are already installed).
3. In above step 5, select recovery_org_stock.img instead of recovery.img file
Thats all, now your phone is unrooted and you can do OTA Update.
Press Thanks button if you like this post!
Click to expand...
Click to collapse
Hi,
Thanks for your help. But bad news for me. CWM recovery img is not working in my auxus one. even stock img also not working.
Now recovery mode is empty . i cant enter into recovery mode please help me
amarbunty said:
Under clock its cpu speed
Click to expand...
Click to collapse
Please help me. need recovery image to flash. Right now i don't have any recovery mode. Stock recovery is deleted,
Request
Pls any one upload custom rom (MIUI) for iberry auxus one......
Karbonn Titanium S6 Rooting Guide
WARNING : Rooting your Android smart phone will void the warranty. Proceed at your own risk.
Requirements:
1. SP Flash Tools - http://forum.xda-developers.com/showthread.php?t=2650125
2. MTK6582 Scatter file for Titanium S6 - http://www.mediafire.com/view/9afywj8dnk0ldee/Karbonn-Titanium-S6-MT6582_Android_scatter.txt
3. CWM + TWRP + CTR Recovery for Titanium S6 (all inside a ZIP, use any one of them, TWRP is best) - http://www.mediafire.com/download/3etel9x7m16wywa/Karbonn-Titanium-S6_Recoveries.zip
5. SuperSu installer ZIP - http://download.chainfire.eu/supersu
6. MTK Preloader USB Drivers - http://www.mediafire.com/download/bc5h4qpnae5erhl/MTK_MT65XX_Preloader_Driver.7z
CAUTION for SP Flash Tools: Do not play with SP Flash Tools. Never touch preloader. Never use format or firmware upgrade modes. Use only as directed. It is a powerful tool and unnecessary playing with it can brick your phone (make it dead).
Process:
1. Install MTK 65XX Preloader drivers in Windows.
2. Copy downloaded SuperSu installer ZIP to phone's SD card.
3. Launch SP Flash Tools, click on Scatter loading and select the scatter file you downloaded.
4. Uncheck all checkboxes (very important), and select only Recovery. Click on recovery location and choose CWM (TWRP or CTR) recovery file you downloaded.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5. Make sure Download Only mode is selected. Click on green Download button. Turn off your phone and connect it to your PC. with a USB cable.
6. When download of recovery is finished in SP Flash Tools, close the SP Flash Tools, disconnect the USB cable. Remove the battery from phone and put it back.
7. Press Volume Up + Power buttons together for 1-2 seconds. You will see 3 options. Use Volume UP to select Recovery option and press Volume Down to enter into recovery.
8. In CWM Recovery select install ZIP from sdcard. Then browse and select UPDATE-SuperSU-v2.46.zip from your SD card. Choose Yes to install it.
9. When install is finished, select Go Back and reboot the system from CWM recovery.
10. Karbonn Titanium S6 is now rooted and you can see SuperSu app in your phone.
Disclaimer: If you do not follow the steps exactly, then it may result in a bricked device. I will not be responsible for any damage done to your phone. If you have any doubt about what you are doing, do not proceed and ask someone who knows more about rooting Android phones.
Is it safe
Hi Just want to know if it safe to try it because i really want to put CWM Recovery on my phone.
In the past i've try to do so with my Lenovo A2107a-h tablet and it had BRICK...!!!
i really don't want to brick my phone.
Deezy09 said:
Hi Just want to know if it safe to try it because i really want to put CWM Recovery on my phone.
In the past i've try to do so with my Lenovo A2107a-h tablet and it had BRICK...!!!
i really don't want to brick my phone.
Click to expand...
Click to collapse
It is safe. I have been using it on my Karbonn Titanium S6. I have also create CTR Touch recovery and TWRP Recovery for Karbonn Titanium S6. I will upload them if anybody needs.
The phone can become bricked for many reasons - It can become bricked if you try to flash wrong pre-loader in SP Flash Tools. So when you use SP Flash Tools, select only Recovery and de-select everything else. Also use only Download Only mode in the SP Flash Tools., other modes can overwrite memory and brick your phone.
pleas help me!!!
i dont press volume down to OK mode my phone is huawei y560 u02
please help me. his does not work for my phone. no download mode no recovry!!
just this screen and volume down Does not work
[IMG="help me"]