Database Info

[TWRP] TWRP Recovery v2.3.2.3 For Micromax A89

So, for installing TWRP you need to follow these steps:
IMP:
[*] You need not to have rooted phone.
[*] This is for MMX A89 ONLY! Don't use for other phones as you can brick it!
[*] Although, this rom has been tested, I'm not responsible for any damage!
Prerequisites :
1. MTK6577 Drivers (Thanks to Bhardik)
2. SP Flash Tool (Thanks to Bhardik)
3. TWRP Itself! (Thanks to yuweng
Now we are ready to Flash!
[IMPORTANT : DISCONNECT YOUR PHONE BEFORE STARTING THIS TUTORIAL]
1. First of all, Download all of the packages listed above.
2. Install Drivers and Extract SP Flash Tools & TWRP image.
3. Now open extracted SP Flash Tool folder and run Flash_tool.exe
4. Click on "Scatter-loading" button which is on the right side below Downloading Agent. A new window will open. Browse to the extracted "TWRP for MMX A89-dan.man" folder and select "MT6577_Android_scatter_emmc.txt" file.
Refer this screenshot for more help:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5. Flash tool will populate the Map file on the application window. You will see multiple entries. Uncheck all entries except for RECOVERY.
6. [Skip this step if recover.img is already selected] Now to select recovery file, click on recovery and select recovery.img file.
7. Now click on "Download". Warning message will occur, but ignore that and click Yes.
7. You will see in the status bar below "Searching", now connect your phone (with battery inserted + Press and Hold Volume Up Key) via the USB cable. Keep those buttons holding while the process is completing.
8. Wait for the process to finish and then you will get a window showing green circle.
Congrats You have flashed TWRP Recovery v2.3.2.3 ! Enjoy!
Note: If you get any error in SP Flash Tool, then recheck your MTK drivers installation or manually install them through device manager.
Click to expand...
Click to collapse
-------------
Booting into TWRP Recovery v2.3.2.3 is the same as in the stock recovery. Switch on the phone with "Volume Up" and "Power" button Pressed. The Phone will boot into TWRP Recovery v2.3.2.3!
Here's a screenshot of TWRP working on my A89 :
-------------
CREDITS GOES TO YUWENG & BHARDIK :highfive:
All Credit goes to yuweng for creating the ROM and BHARDIK who has made CWM for A89 and helped compiling this tutorial.
And GREAT thanks to the Russian Master Shifu Javum, as he is the one that compile TWRP for our MT6577... :good:
Click to expand...
Click to collapse

dan.man said:
So, for installing TWRP you need to follow these steps:
IMP:
[*] You need not to have rooted phone.
[*] This is for MMX A89 ONLY! Don't use for other phones as you can brick it!
[*] Although, this rom has been tested, I'm not responsible for any damage!
Prerequisites :
1. MTK6577 Drivers (Thanks to Bhardik)
2. SP Flash Tool (Thanks to Bhardik)
3. TWRP Itself! (Thanks to yuweng
Now we are ready to Flash!
[IMPORTANT : DISCONNECT YOUR PHONE BEFORE STARTING THIS TUTORIAL]
1. First of all, Download all of the packages listed above.
2. Install Drivers and Extract SP Flash Tools & TWRP image.
3. Now open extracted SP Flash Tool folder and run Flash_tool.exe
4. Click on "Scatter-loading" button which is on the right side below Downloading Agent. A new window will open. Browse to the extracted "TWRP for MMX A89-dan.man" folder and select "MT6577_Android_scatter_emmc.txt" file.
Refer this screenshot for more help:
5. Flash tool will populate the Map file on the application window. You will see multiple entries. Uncheck all entries except for RECOVERY.
6. [Skip this step if recover.img is already selected] Now to select recovery file, click on recovery and select recovery.img file.
7. Now click on "Download". Warning message will occur, but ignore that and click Yes.
7. You will see in the status bar below "Searching", now connect your phone (with battery inserted + Press and Hold Volume Up Key) via the USB cable. Keep those buttons holding while the process is completing.
8. Wait for the process to finish and then you will get a window showing green circle.
Congrats You have flashed TWRP Recovery v2.3.2.3 ! Enjoy!
-------------
Booting into TWRP Recovery v2.3.2.3 is the same as in the stock recovery. Switch on the phone with "Volume Up" and "Power" button Pressed. The Phone will boot into TWRP Recovery v2.3.2.3!
Here's a screenshot of TWRP working on my A89 :
-------------
Click to expand...
Click to collapse
I use this its awesome

Sir I have rooted my phone micromax q336 with kingroot but unable to flash twrp or any other custom recovery I am not having a pc ko please somebody

[TUT]How to ROOT LAVA IRIS n320/n350[CWM] [CONFIRM WORKING]

Hey XDA folks i own a LAVA IRIS n320 (Basic Droid Phone) for past months i tried to search various methods of rooting it and installing the clockworkmod on the device.
Device Specifications are listed here : http://www.fonearena.com/lava-iris-n320_2372.html
N350 : http://www.fonearena.com/lava-iris-n350_2371.html
First of all i could like to thank @getmesar due to his method i got it work ! Love ya dude ! :laugh: :good: :good:
These devices are almost the same hardware specs With both being Meditak MT6575 Chipset Hardware :highfive::highfive:
NOTE:THIS CAN BRICK YOUR DEVICE IF YOU DID NOT DO PROPERLY I AM NOT RESPONSIBLE FOR WHAT HAPPEN TO DO YOUR DEVICE.
Let the Rooting Process Began :
We Need Following things ::cyclops:
1.MTKDROID root and tools : Here
2.SP_Flash_Tool_v3.1224.01 : Here
3.Drivers : MediaTek-1.1123.0 : Here
Got rOOt?
1.Making the Scatter File :
Open the MTKdroid tools and create the scatter file as shown in the pic and save the file in a good place(where you can remember)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2.Prepare the Scatter File: Open the SP TOOLS where you downloaded from above load the scatter file which we created
3.Preparing the ROm :
Click on the button ADD. Double click on the line and save the ROM.
#Things To notice: The filename Will be like "ROM_#". in your case probably it'll be ROM_0.
#Remember the path of the File. U'll use this file later.
Alfter Clicking Save a new Window will appear named as "Read Back Block Start Address"
Windows Settings Will be as below
Type: Hex
Read Method:Read Page Only
Start Address: 0x0000000000000000
Length:0x12BA0000
4.Reading the Rom :
Click on Read ROM with the phone switched off and connected to the PC
Follow these Steps Carefully.Once Rom is Created you can use it in future.On success you'll see a BIG GREEN CIRCLE embded in a message box.
5.Prepare files for FlashTool and make CWM:
Open the MTK Droid Root & Tools window which we left on 1st step.it is necessary to turn on phone and to connect it to the program. Click on To process file ROM_ from FlashTool button and choose the ROM_* file saved earlier. At successful unpacking rom it will be offered to choose CWM from similar phone. Chosen CWM it is checked on compliance to the connected phone and if ok, the CWM is created.
A new scatter file and other neccessary files are created in the backup folder in droid root program's directory.you'll need the files in the next step.
6.Download new CWM to the phone:
Start FlashTool, choose scatter in the folder created on the previous step. Remove marks from all blocks! Click on RECOVERY and we choose the file CWM in the same folder which was created on the previous step. Click Download and connect a cable to PC (phone has to be switched off) and expect the end of process.
NOTE n this step the CWM recovery block has to be marked only! Also it is necessary to use only the Download button and not to use at all the Firmware Upgrade button!
Summary of step 6:
--> Click on Scatter-loading.Select Scatter file from the backup folder.
--> Make Sure all the checkboxes are unchecked. Only Recovery should be Checked.
--> Click Exactly over Recovery.
--> It will ask you to select a file. Now select a Recovery file created in step 6. Tt must be inside backup folder named as "Recovery_###.img"
--> Click Button Download.
--> Connect SWITCHED OFF phone.
Green SYMBOL MEANS YOU ARE DONE :good:
NOTE: USE THE ADB TO ACCESS THE RECOVERY
COMMAND : adb reboot recovery
This is because the keys dont work
7. Install Superuser.
Load phone in CWM mode, connect to MTK Droid Root & Tools, go on the tab root, backup, recovery and, pressing on this tab
- install superuser
Voila You now have ROOT access ! enjoy ~
Any Questions Post below or Pm
Need more Devs who can contribute more to this good device .

need CWM
plz upload cwm recovery img file for lava n320.

plz upload cwm
plz upload the cwm recovery img which u created. i dont have a pc so i cant use mtk droid tools plz upload and +1 thanks for this great tut bro.

upload cwm
hey bro plz upload cwm img for my lava n320 i dont have pc i cant create without pc plz upload

GUys you cannot me this without pc i am sorry but all the ones are clearly mentioned there please have a look

[ROOT][CWM] StarMobile Diamond V7 (JB 4.2.1) MT6589

All credits to all the devs for the tools and utilities that I use to ROOT and install CWM on my newly handheld device...:victory:
StarMobile Diamond V7
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Before we proceed, let me remind you guys, that you are doing this at your own risk and no one is to be held responsible!!!
This ROOTing procedures and installing of CWM works perfectly on my device, so read and follow all the instructions carefully!!!:fingers-crossed:
We can install CWM without rooting this phone, so feel free to choose where do you want to start...:highfive:
Part 1
Rooting Your Phone
Download files below and do the following procedures.
MT65xx_USB_Driver
RootFiles
Click to expand...
Click to collapse
1.Download RootFiles and MT65xx_USB Driver from the links above and extract on your desktop.
2. Enable USB Debbuging Mode and Unknown Sources of your phone.
3. Connect your phone into your computer and wait until successfully recognized.
You may also want to check on your computers Device Manager if the driver is properly installed.
4. Open the RootFiles that you extracted on your desktop, right click on "run.bat" and run as administrator.
5. Follow on screen instructions...
6. Go to your phone and allow to complete rooting process.
7. Your phone will automatically reboot after rooting, check your apps and there should be SU (superuser apps) installed. Done! You have succesfully rooted your phone.
Part 2
Installing Custom Recovery (CWM)
Download files below and again follow the steps...
ScatterFile
RecoveryImageOnly for Starmobile D7!!!
SP FlashTool
Preloader.bin file
Click to expand...
Click to collapse
By the way I use MTKDroid Tools to create the Scatter File and the Recovery Image. Just head on the LINK, if you want to know more about MTKdRoid Tool thanks to rua1:good:
Moving on...
1. Extract all the files you downloaded from the links above on your desktop, and it's better to put them on same folder.
2. Right cllick on SP Flashtool and run as administrator.
3. Click on Scatter-Loading and look for the "ScatterFile".
4. Uncheck everything except for the recovery and look for "recovery.img" and hit enter, F9, or download button.
5. Click yes then turn off your phone, remove and put back the battery.
6. SP FlashTool will start downloading the custom recovery image.
7. Wait until finish downloading...the next screen will appear and hit enter.
Congratulations!!! You have now a Custom Recovery installed. Turn your phone off, and just press VOL UP + POWER BUTTON to enter into your new recovery.
NOW your phone is ready for customization, but before doing that...SECURE A NANDROID BACKUP !!!
I dont have customROM available for this device yet, but thanks to rovo89 for his great Xposed Framework
With this great application, you can now modify your ROM without modifying any APK's or flashing from recovery!!!
Some customization done on my phone is the APM (advance Power Menu)
Volume option to set independently
I also managed to backup the stock ROM of this device, that can be easily download back to your phone by means of SP FlashTool. (assuming you have messed up your phone system and failed to work properly)
Other purpose of the full backup is for the customROM, (wish that some of our good devs here might find time to take a look and help us make a customROM out of it)
I'm not good of creating customROM, but I'm hoping that I could build one...regards to all!!!:fingers-crossed:
This is my first thread so please consider this , just post any comment if i missed anything...thanks!!!

Full BackUp
Stock Rom Back Up for SP Flash Tool
Nandroid BackUp Extract the zip file then copy and paste the whole folder
on your /sdcard/clockworkmod/backup, then do a nandroid restore from CWM.

Thanks for sharing sir.
I would like ask too if you have unroot procedure?
thanks a lot.:highfive:

makeoutactics said:
Thanks for sharing sir.
I would like ask too if you have unroot procedure?
thanks a lot.:highfive:
Click to expand...
Click to collapse
just flash the stock rom using SP Flashtool ...

iBerry Auxus Linea L1 Root/Guide

How to Root iBerry Auxus Linea L1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I Have Found Many Users Searching For Root For Auxus Linea Li Root
Today I am going to provide you the process for rooting the phone. After rooting you can do a lot more in it. You can install custom ROMs, you can update the phone firmware, you can remove pre-installed application from the same, etc. Adding custom rom is the best thing you can do on it. So let’s move ahead with rooting. Remember that it is a one way proceed. That means once rooted you won’t restore things back. Also you will lose the phone warranty.​
Requirements:
Rooting means simply messing with phone permission. Sometime if you go with wrong stuff your phone will brick or wont boot. At that point resorting factory settings will only work. It is good if you can backup your phone first. And then only went ahead with the process.
Charge the device to maximum. Never attempt to root or make any changes if the battery is low. This can cause serious issue.
You have to update your system with latest usb drivers that will help your windows pc to communicate with the mobile phone. Install that.
Go in the settings and tap on developer options. There you can find usb debugging. Turn that thing on.
Download SP FLASH TOOL and keep it in a folder on your desktop.
Download the original iBerry Auxus Linea L1 USB Drivers and install them.
Download the Boot Recovery & Scatter files for iBerry Auxus Linea L1.
The last thing you will need is MTK Droid Root 2.5.3 root tool.
Rooting Process:
1.Extract the content of Sp Flash zip file in a folder. There will be a flash tool.
2.Extract the content of boot recovery and scatter in the same folder.
3.Run the sp flash took in the admin mode. In that you have to click on scatter loading. Choose the scatter file. This file will be available in the boot recovery folder.
4.The next thing you have to do is select the boot image file. You can do that by clicking on the left side of the Flash Tool.(just Click check box & click in blank space next to bootimg. and select Linea-L1_140626__boot_patched_140719-173447.img only)
5.Once done just check once again that the files are properly selected.
6.Now you have to extract the content of drivers that you had downloaded. Switch off your phone and connect it to your pc. Your pc will ask for the drivers. You have to provide the folder location.
7.When you are done with driver installation disconnect the phone and remove the phone battery.
8.Connect the phone just like that in switch off mode. After few seconds insert the battery back and then connect the phone to pc. Now in sp flash tool click on the download button.(FOR DRIVER HELP http://http://forum.xda-developers.com/showthread.php?t=2180436)
9.Flashing will start and you will get a completed process at the end.
10.After that you have to run the droid root software. For that first turn on your phone and from settings enable usb debugging. If you are unable to find the same then go in about and tap on build 5 times to turn on developer options.
Just connect the phone and then going Droid Root software. There you can find Backup recovery tab. Click on that and then click on super su. This will install super su user on the phone. You can then update the app from Google Play store.
U can ask a question if any of my wording is not understandable.
SP Flash Tool 3.1352.01 (5.1352.01).rar

Thanks
Nice :good: but is there any OS mod available? Looking forward for that

charancherry said:
Nice :good: but is there any OS mod available? Looking forward for that
Click to expand...
Click to collapse
May b in some days .

Hi Bro,
Nice to see this, But when i am doing... After clicking the download button nothing is happening. One full night i kept with connected. nothing is working fine...
Kindly help me....
Thanks & Regards

prasadskht said:
Hi Bro,
Nice to see this, But when i am doing... After clicking the download button nothing is happening. One full night i kept with connected. nothing is working fine...
Kindly help me....
Thanks & Regards
Click to expand...
Click to collapse
Switch off your phone and connect it to your pc. Your pc will ask for the drivers. You have to provide the folder location.Install Driver First And follow the procedure above mention .

manish dubey said:
Switch off your phone and connect it to your pc. Your pc will ask for the drivers. You have to provide the folder location.Install Driver First And follow the procedure above mention .
Click to expand...
Click to collapse
Thanks Bro,
Now i am able to do flash and followed the same steps. After i installed "Titanium back" when i tried to open it saying "Sorry, I could not acquire root privileges............................."
Kindly help me ...

Cutom rom for my Auxus linea L1
i am not getting any custom rom for this phone any side
are you working anything for this
i will be waiting for your reply

Yes I am waiting for any dev to make custom recovery for it ..

[Guide] Karbonn Titanium S6 Root + CWM Recovery

Karbonn Titanium S6 Rooting Guide
WARNING : Rooting your Android smart phone will void the warranty. Proceed at your own risk.
Requirements:
1. SP Flash Tools - http://forum.xda-developers.com/showthread.php?t=2650125
2. MTK6582 Scatter file for Titanium S6 - http://www.mediafire.com/view/9afywj8dnk0ldee/Karbonn-Titanium-S6-MT6582_Android_scatter.txt
3. CWM + TWRP + CTR Recovery for Titanium S6 (all inside a ZIP, use any one of them, TWRP is best) - http://www.mediafire.com/download/3etel9x7m16wywa/Karbonn-Titanium-S6_Recoveries.zip
5. SuperSu installer ZIP - http://download.chainfire.eu/supersu
6. MTK Preloader USB Drivers - http://www.mediafire.com/download/bc5h4qpnae5erhl/MTK_MT65XX_Preloader_Driver.7z
CAUTION for SP Flash Tools: Do not play with SP Flash Tools. Never touch preloader. Never use format or firmware upgrade modes. Use only as directed. It is a powerful tool and unnecessary playing with it can brick your phone (make it dead).
Process:
1. Install MTK 65XX Preloader drivers in Windows.
2. Copy downloaded SuperSu installer ZIP to phone's SD card.
3. Launch SP Flash Tools, click on Scatter loading and select the scatter file you downloaded.
4. Uncheck all checkboxes (very important), and select only Recovery. Click on recovery location and choose CWM (TWRP or CTR) recovery file you downloaded.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5. Make sure Download Only mode is selected. Click on green Download button. Turn off your phone and connect it to your PC. with a USB cable.
6. When download of recovery is finished in SP Flash Tools, close the SP Flash Tools, disconnect the USB cable. Remove the battery from phone and put it back.
7. Press Volume Up + Power buttons together for 1-2 seconds. You will see 3 options. Use Volume UP to select Recovery option and press Volume Down to enter into recovery.
8. In CWM Recovery select install ZIP from sdcard. Then browse and select UPDATE-SuperSU-v2.46.zip from your SD card. Choose Yes to install it.
9. When install is finished, select Go Back and reboot the system from CWM recovery.
10. Karbonn Titanium S6 is now rooted and you can see SuperSu app in your phone.
Disclaimer: If you do not follow the steps exactly, then it may result in a bricked device. I will not be responsible for any damage done to your phone. If you have any doubt about what you are doing, do not proceed and ask someone who knows more about rooting Android phones.

Is it safe
Hi Just want to know if it safe to try it because i really want to put CWM Recovery on my phone.
In the past i've try to do so with my Lenovo A2107a-h tablet and it had BRICK...!!!
i really don't want to brick my phone.

Deezy09 said:
Hi Just want to know if it safe to try it because i really want to put CWM Recovery on my phone.
In the past i've try to do so with my Lenovo A2107a-h tablet and it had BRICK...!!!
i really don't want to brick my phone.
Click to expand...
Click to collapse
It is safe. I have been using it on my Karbonn Titanium S6. I have also create CTR Touch recovery and TWRP Recovery for Karbonn Titanium S6. I will upload them if anybody needs.
The phone can become bricked for many reasons - It can become bricked if you try to flash wrong pre-loader in SP Flash Tools. So when you use SP Flash Tools, select only Recovery and de-select everything else. Also use only Download Only mode in the SP Flash Tools., other modes can overwrite memory and brick your phone.

pleas help me!!!
i dont press volume down to OK mode my phone is huawei y560 u02
please help me. his does not work for my phone. no download mode no recovry!!
just this screen and volume down Does not work
[IMG="help me"]