Hey Guys,
I think I bricked the device, all help would be appreciated. I have the Geniatech atv310B (M3). I was flashing with the XDA developers gotham build. I copied all of the files to the SD card and placed it into my receiver. Then, I hit the reset button and plugged it into the power. However, My hand slipped and I accidentally let go of the reset button. Thinking that I had not not started the flash process correctly, I took it off power to do it again(I SHOULD NOT HAVE DONE THAT). Now, it won't turn on. It has not responded to some of the solutions of using a bootable SD card or placing certain files on the SD card and rebooting it while holding the reset button.
Does anyone have any possible solutions?
Thank you.
Hi there
I am on the same case here but either forum seems dead to me, or no solution found yet.
Good luck by the way, in case you find solution please let me know.
hi, i have bricked also my android box, have you found a solution ?
hi, i have bricked also my android box, any solution to unbrick?
Me too, but haven't found solution https://forum.xda-developers.com/showpost.php?p=78683420&postcount=1685
EDIT ============
SPI & firmware http://ebdemo.ddns.info/MyGica
It may unbrick by sdcard boot method: http://chinagadgetsreviews.blogspot.com/2015/04/how-to-unbrick-any-amlogic-devices.html
https://forum.kodi.tv/showthread.php?tid=180446&pid=1772707#pid1772707
Related
Hi,
I am new to this forum but quite sure someone will be able to help me. I got a LG LN790 GPS which by mistake got a file corrupted when connected to computer. Now it wont boot just the red power light glows for few seconds then switches off. Now when connected computer wont detect it. Tried soft reset but no help.
Can someone help me please to hard reset or how to load the boot file. One more thing I have another working one same model can this be of any help to copy any files from the working one.
Thanks in advance
ask here
http://www.gpsunderground.com/forums/showthread.php?t=5939
shaopc said:
Hi,
I am new to this forum but quite sure someone will be able to help me. I got a LG LN790 GPS which by mistake got a file corrupted when connected to computer. Now it wont boot just the red power light glows for few seconds then switches off. Now when connected computer wont detect it. Tried soft reset but no help.
Can someone help me please to hard reset or how to load the boot file. One more thing I have another working one same model can this be of any help to copy any files from the working one.
Thanks in advance
Click to expand...
Click to collapse
Welcome to the forum
Perhaps you did not noticed that this is an HTC devices only forum
Anyway good luck on your search,
This is HTC PPC's; you need to see the LG forums (as posted above).
I'm afraid I might have bricked my phone.
After trying to install CWM on my Huawei Honor and rebooting, a yellow warning sign appears with the following text:
"Image signature verify fail
Your boot/recovery image may have an incorrect signature.
Please update your image to a signature official one.
You can remove battery for power down."
I've read a LOT of posts regarding rooting of this device on here, as well as numerous of other sites, but half of them are outdated and the other half are uninformative or poor in quality. Nobody can seem to get this to work, but I'm still willing to try my luck on here before turning the phone in for a new one, claiming it was an OTA update that did it.
I tried rebooting into Pink/Purple screen and connecting to my computer, but it doesn't show up.. All I hear is a "connected USB" sound and no drives. I tried installing Knives & Forks, but it requires my phone to have USB Debugging enabled, which, to my LACK of luck, wasn't enabled when this error happened. I'm really freaking out, as I just got this phone.
Please, any help would be greatly appreciated!
bump..
same problem
CheckeredDots said:
bump..
Click to expand...
Click to collapse
I have same problem , It's terrible that can't find a solution about this problem.
Please help us...
some one please help. here is the same problem with me aswell
gultekinyadigar said:
I have same problem , It's terrible that can't find a solution about this problem.
Please help us...
Click to expand...
Click to collapse
I have the same problem please help.
krishnaneupanes said:
I have the same problem please help.
Click to expand...
Click to collapse
I'm having this same problem with my girlfriend device....I saw a gui that have this problem solved but i wasmn't hable to make the same and solve :S
any one can help please ??
I dont know if it will work for you guys but i managed to fix mine. I placed dload folder with desired update either GB or ICS into micro sd card. Place it in the phone, and hold Volume Up + Volume Down + Power (refering to pink screen) and mine started to flash the stock rom.
check this thread http://forum.xda-developers.com/showthread.php?t=2198184&highlight=u8860
thanks it workerd. had the same problem and solved
thanks it workerd. had the same problem and solved
Hi there,
I am using a Q8H 2014 02 20 A23 Allwinter tablet. This tablet has pretty bad battery issues so I have looked to swap the battery with one from my older tablet (this doesn't fit its far to big) however my issue before and after replacing the battery is the OS would constantly reboot as soon as I got to the homescreen I litterally get 1minute into it then it reboots again. Have already tried to factory reset and it sits there with the dead android logo guy and does nothing.
I am wanting to know if this indeed a OS issue if so how can I fix it I have had a search on the net trying to find the ROM file for this model but I am unable to find what I require, I saw when it goes into recovery that I can grab a rom via SD card if I am not mistaken.
Is it possible for someone to help me with the rom file I require and able to tell me if this will fix my issue??
Thanks for your help in advance.
Regards,
Time Bandit
Apologies if I have put this in the wrong place.
Hi guys, i'm desperately writing this thread after asking for help in the Oppo Community forum without no luck.
I know that this is for R7 Plus but i hope that someone could help me with my beloved R7s.
Months ago i've succefully installed the Project Spectrum ROM and it worked fine until few weeks ago when i noticed a random system slow down, maybe after an automatic app update.
I tryed to uninstall few apps and reboot the phone several times but with no luck.
So i decided to wipe it and reinstall the Color OS following the walkthrough but something went wrong and now my OPPO R7s is in a strange bootloop without recovery and fastboot.
The strange things are these:
- if I press the power button all I can see is the OPPO Logo and the loading dots in slow-mo
- if i connect it directly to a Windows PC it is recognized as a generic "Android" terminal.
- if i connect it to a Windows PC pressing and holding POWER + VOLUME DOWN + VOLUME UP it's recognized as a QHSUSB_BULK
I'm not a noob, neither an engineer, but i've a bit of familiarity with computers and similar things so i've tried to follow this guide:
http://community.oppo.com/en/forum.php?mod=viewthread&tid=48654
Downloading this service repair rom : https://drive.google.com/file/d/0BybDE_sPI3b5cmgtU05fbXNobVU/view (from this related discussion : http://forum.xda-developers.com/r7-plus/help/r7s-service-romqpst-unbrick-t3493377)
Following the guide, when i try to execute MSM8x39Downloadtool.exe selecting the phone model (i've three choices xx080_32G, xx081_32G, xx082_32G - and i don't know which one is the correct one) the phone is not recognized as COM CONNECTED in none of the ports. If I also do the verification, clicking on the top right button, it shows FAILED on system.img file.
Can that be the problem?
I'm stuck guys and i don't know what to do.
Any help will be better then a christmas present
Thanks in advance!!
A.
Download this rom and place it in the internal sd and flash to downgrade from spectrum
https://s3.amazonaws.com/public.opp...d_ColorOS/Specified_ColorOS_R7sf_full_009.zip
kishd said:
Download this rom and place it in the internal sd and flash to downgrade from spectrum
https://s3.amazonaws.com/public.opp...d_ColorOS/Specified_ColorOS_R7sf_full_009.zip
Click to expand...
Click to collapse
Thanks kishd i'll give this a try!
The only thing i'm bit worried about is how to flash from the internal sd without recovery mode and fastboot...
I'll keep you updated!:good:
any news?did you manage to fix?
hello guys
i have a problem with my oppo RS7
it has a hard bricked and stucked on booting and booting..... I only have a MacBook Pro and not windows
is anyone over there that knows exactly how to unbrick it using a Mac ?!
Hello,
I hope it is the right place to ask for help .... The automatic system update failed and now the tablet is stuck at Android System Recovery Screen. Wipe Data / factory reset does not bring the system back, so I guess I need to upload rom / update from sd card - I got option "apply update from sd card".
So, please, help me to recover from this situation as my tablet is stuck .... I do not have or could not find the right files to use with "apply update from sd card."
Or, any links to the tutorial for updating / uploading rom for this model will help ...
Thank You very much in advance.
Kindest Regards
Lukasz
I solved the problem by uploading the rom again.
1) SPF Tool + MTEK drivers for win
2) Official ROM
Just two things:
a) if SPF throws error you need to choose upgrade firmare not download
b) you need to take off the back cover and unattach the battery otherwise it will not work
Have a nice day
Lukasz
Hi !
Thanks for confirming that you solved your problem !
I will now move your thread to the dedicated section .
Cheers
Hi everyone. Just did the solution like what Luqpa_W said but my tablet is still bootlooping on lenovo screen. There is no problem during flashing and everything seems fine during flashing. I do not really understand what is the problem with my tablet. If someone knows how to deal with it, please let me know.
_____
EDITED: My tablet just got booted! After several times of reboot, it seems working. Thanks!