Hi there,
I am using a Q8H 2014 02 20 A23 Allwinter tablet. This tablet has pretty bad battery issues so I have looked to swap the battery with one from my older tablet (this doesn't fit its far to big) however my issue before and after replacing the battery is the OS would constantly reboot as soon as I got to the homescreen I litterally get 1minute into it then it reboots again. Have already tried to factory reset and it sits there with the dead android logo guy and does nothing.
I am wanting to know if this indeed a OS issue if so how can I fix it I have had a search on the net trying to find the ROM file for this model but I am unable to find what I require, I saw when it goes into recovery that I can grab a rom via SD card if I am not mistaken.
Is it possible for someone to help me with the rom file I require and able to tell me if this will fix my issue??
Thanks for your help in advance.
Regards,
Time Bandit
Apologies if I have put this in the wrong place.
Related
Hello. After factory reset my goclever does not stand up. It freezes at android logo and nothing happens later (no reset, just android logo). I think it might be because after installing apex pro i deleted stock launcher. Device manager sees it as ' Full AOSP on Rk29sdk ' (but cannot copy anything to device) and ADB sees no device.
Is there any way to do something ? Christmas are soon, so i will not send it to service cenrte.
haseo9119 said:
Hello. After factory reset my goclever does not stand up. It freezes at android logo and nothing happens later (no reset, just android logo). I think it might be because after installing apex pro i deleted stock launcher. Device manager sees it as ' Full AOSP on Rk29sdk ' (but cannot copy anything to device) and ADB sees no device.
Is there any way to do something ? Christmas are soon, so i will not send it to service cenrte.
Click to expand...
Click to collapse
You can't access recovery or download mode too ?
karimkahale said:
You can't access recovery or download mode too ?
Click to expand...
Click to collapse
Goclever hasn't published any R75 firmware yet. Also this tablet doesn't have any physical buttons except power switch. On my native language forum was sometime ago rumor that on downside motherboard is switch which combination with power button gives recovery menu. Personally i tried various combinations but didn't worked for me.
Any ideas ?
haseo9119 said:
Any ideas ?
Click to expand...
Click to collapse
Hello.
Which version of the device do you have?
7500
or R75
Those seems to be the same but are different.
I have stock android version for both
for 7500 - original, unrooted ( from a Russian site - don't remember)
for R75 - original, rooted ( a dump created by me from my device when I have received it)
Both works, were tested by me on my R75.
The firmware of 7500 flashed on R75 works, but you won't be able to use the capacitive buttons (as I told you are different).
The flash option is very simple:
1. Copy two files on the root of the sd card
2. Insert the card in the card slot of the device.
3. The flashing process will continue automatically.
Just tell me which one you need and a place where to upload the needed firmware. I can do the upload this weekend.
Regarding ADB, hmm... this is strange. I have done the same thing as you (deleted the launcher and restore to default) but adb was working with device in the android logo state.
I'm using Windows 8 and I have installed the device as test ADB device (from windows drivers).
Bye.
Edit:
This is the link for R75 rooted firmware.
http://www.sendspace.com/file/0fhask
I hope it helps you.
Bye.
Edit:
This is the link for GoClever tab 7500
http://www.sendspace.com/file/shrso4
Bye.
On the back he have written that he's tab 7500. Soon i will try to flash him with your 7500 image. Hope it will work ^^ Thank you very much.
Everything on first look is working on. Except wifi card, which doesn't turning on.
/update
R75 software fixed it. Don't trust manufacturer anymore.
haseo9119 said:
Everything on first look is working on. Except wifi card, which doesn't turning on.
/update
R75 software fixed it. Don't trust manufacturer anymore.
Click to expand...
Click to collapse
its not working with me. i have kingston microsd card 8gb and i put 7500 image on root of the card.then, i started the tablet but nothing happens. it still show ANDROID logo and wont flash,please help!!!
goclever
severijan said:
its not working with me. i have kingston microsd card 8gb and i put 7500 image on root of the card.then, i started the tablet but nothing happens. it still show ANDROID logo and wont flash,please help!!!
Click to expand...
Click to collapse
hello
this may help some one later
to get into recovery if your R75 table wont boot you have to take it apart the button is on the underside of the board behind the screen (silly place to put it) i have being talking to goclever support and more firmwares are going to be added to the site. if you want yours adding send them an email requesting it (one may not be enough ) i have just had this problem and after a month they agreed to take it back and have reflashed it for me
hope this helps someone
I have an AllWinner A10 based tablet that started working weird about a month ago - when the display was on there was no sound and to get the sound you had to turn off the display. I tried to fix it by flashing a custom ROM without understanding the process thoroughly. Long story short, I think I may have bricked it I believe the last thing I did was to install CWM-recovery-5.5.0.4.img through LiveSuit. Now I get only a blue Android logo at startup and nothing more. I have tried installing the stock ROM back but I always get this error in LiveSuit - ".PnpFelIn:invalid ID"
I am attaching a shot of the logo that comes up, hoping that some one will recognize what the logo means, and more importantly, if it's possible to recover my tablet from that point ?
Any pointers are very welcome at this stage.
Thanks
Hi
Any luck sorting this?
I have same error when using livesuit, and phoenixusbpro, ive got the natpc m009s with forgotten pincode, have got image file but can't install it, recovery mode just shows a dead android with red triangle,nothing else happens. Android Multi Tools v1.02b gsmforum gives an error of no files in the tablet so i can't use that either, tried .zip files on sd card too, nothing. tried 3 cables 2 computers with different operating systems.
Any help from anyone much appreciated.
Hi, I have a Kross GY-601 Tablet... One of the cheap chinese tablet you can pickup at factorydirect (Canada)
I seem to have bricked it when attempting to port Clockwork Mod Recovery to it. It does not show anything on screen or do anything, When I connect it to my computer.. It shows up as M6-CHIP in Device Manager as shown in my image.
The internal storage is completly gone as a result of my failed attempt to un-brick it..
It would be a great help if someone helped me fix this..
Thanks in advance..
-Henrique
PS: I'm only 13 sorry if my description of the problem is a bit bad..
Sooo,
You probably don't have proper drivers, use PDANet ones, they work even with obscure tablets.
You tried to port CWM or flash?
It's not bricked since your computer detects it
Last thing, do you have a backup recovery image or another recovery image that works so you can get it back up?
Daniel
I was dumb enough not to do any recovery image backups..
Also.. I ported cwm then flashed it with dd just poped the .img into the recovery block.. but since I didn't compile it properly when I adb reboot recovery.. It got into a boot loop.. so I tried to fix it but broke it even more... So then I tried re-writing the firmware for generic 4.1.2 chinese tablet.. but that messed it up to the point were it only shows as M6-CHIP.. i can only turn on and off.. nothing else.. no boot no screen light up nothing..
I can help you BUT....
loureirom_ said:
Hi, I have a Kross GY-601 Tablet... One of the cheap chinese tablet you can pickup at factorydirect (Canada)
I seem to have bricked it when attempting to port Clockwork Mod Recovery to it. It does not show anything on screen or do anything, When I connect it to my computer.. It shows up as M6-CHIP in Device Manager as shown in my image.
The internal storage is completly gone as a result of my failed attempt to un-brick it..
It would be a great help if someone helped me fix this..
Thanks in advance..
-Henrique
PS: I'm only 13 sorry if my description of the problem is a bit bad..
Click to expand...
Click to collapse
Even i am having the same device on its stock rom and kernel so i guess i can help you i was into rooting and upgrading it but didnt do it as i was waiting for a backup device so if i brick it i dont have to wait to buy a device but i am stupid and dont know how to take a backup of the stock rom. If you will help me know how to do that i can help you in return by uploading the stock rom and sharing the link.:highfive:
Hello elders. I hope that I'm in the right session for my ask. I have tried to update my tecno 7c android 5.0 based tablet (that I've bought, just a month ago) cause it proposed it to me in the settings, software update option. Everything went well till the end of the download. After that, my tablet rebooted correctly and came to the android home screen. But each time I put any SIM card inside, I always have this message: "com.phone stopped working". I've tried to perform a full reset of the phone through the stock recovery but I don't even have access to recovery now. The phone is MTK 6582 processor based tablet. I've tried to read on internet to see if there's a way to fix it but the one I've found explained that I need a same working tablet whose backup file I'll flash on the bricked one through SP FlashTool to revive it but I have nobody having such tablet. Help please if you have solutionq for me. Very urgent. My tablet, the only on I have! Thanks in advance.
Hello! Nobody to answer me?
Hello,
I hope it is the right place to ask for help .... The automatic system update failed and now the tablet is stuck at Android System Recovery Screen. Wipe Data / factory reset does not bring the system back, so I guess I need to upload rom / update from sd card - I got option "apply update from sd card".
So, please, help me to recover from this situation as my tablet is stuck .... I do not have or could not find the right files to use with "apply update from sd card."
Or, any links to the tutorial for updating / uploading rom for this model will help ...
Thank You very much in advance.
Kindest Regards
Lukasz
I solved the problem by uploading the rom again.
1) SPF Tool + MTEK drivers for win
2) Official ROM
Just two things:
a) if SPF throws error you need to choose upgrade firmare not download
b) you need to take off the back cover and unattach the battery otherwise it will not work
Have a nice day
Lukasz
Hi !
Thanks for confirming that you solved your problem !
I will now move your thread to the dedicated section .
Cheers
Hi everyone. Just did the solution like what Luqpa_W said but my tablet is still bootlooping on lenovo screen. There is no problem during flashing and everything seems fine during flashing. I do not really understand what is the problem with my tablet. If someone knows how to deal with it, please let me know.
_____
EDITED: My tablet just got booted! After several times of reboot, it seems working. Thanks!