LG LN790 wont boot - General Topics

Hi,
I am new to this forum but quite sure someone will be able to help me. I got a LG LN790 GPS which by mistake got a file corrupted when connected to computer. Now it wont boot just the red power light glows for few seconds then switches off. Now when connected computer wont detect it. Tried soft reset but no help.
Can someone help me please to hard reset or how to load the boot file. One more thing I have another working one same model can this be of any help to copy any files from the working one.
Thanks in advance

ask here
http://www.gpsunderground.com/forums/showthread.php?t=5939

shaopc said:
Hi,
I am new to this forum but quite sure someone will be able to help me. I got a LG LN790 GPS which by mistake got a file corrupted when connected to computer. Now it wont boot just the red power light glows for few seconds then switches off. Now when connected computer wont detect it. Tried soft reset but no help.
Can someone help me please to hard reset or how to load the boot file. One more thing I have another working one same model can this be of any help to copy any files from the working one.
Thanks in advance
Click to expand...
Click to collapse
Welcome to the forum
Perhaps you did not noticed that this is an HTC devices only forum
Anyway good luck on your search,

This is HTC PPC's; you need to see the LG forums (as posted above).

Related

[Q] Lost signal after flash-back to stock on Huawei Ascend

Sorry if this is a repost somewhere but i couldn't find anything on it. I accidently put on the Cricket mod on my phone. I easily flash-backed to stock using a metro-pcs rom. everything is fine and it's just like when i first bought the phone, but now i have no signal. can someone help please?
Any help at all would be appreciated, please.
how did you flash it back to stock?
hello, I had the same problem as you. I iinstalled an update meant for cricket wireless. I saw the forum where they said how to flash it back to stock but can you please explain it to me more in depth? maybe after that i can help you with the signal loss anyway when i download the thing they said to download, none of them would open on my computer, when i tried to download something to help open them, it still wont work. and i don't know how to put my phone on fastboot mode. I have the hawei ascend, when i press the end+volume down+power button, it just says" huawei ascend" white screen and it freezes. I just wanna know how to did yours.
Thanks. Please reply soon.

[Q] Motorola Defy bricked after using bootloader and restarting device

I've looked through the forums. (if I missed the question I am about to ask in the forums, can someone link me to it? I am new and this is my first time posting, but I have used this forum to help me before)Well...Where do I begin....I rooted my Motorola Defy for the first time(this is my second Defy as my old on had hardware issues) and I decided to try to install a custom ROM(CM7). So I looked into it and downloaded Defy2int from the Android Market. I installed it and once it was done, I rebooted my phone and now it will not get passed the Motorola "M". It will load that "M" then turn off and start up again. Every time I plug it into the USB, a white light shows in the LED. I have tried factory reset and nothing. I know about the RSD lite, but my device is not connecting. Is there still a way to connect it? If so can someone please help me and work with me step by step so I do not mess up my phone further....Thank you :/
XChase said:
I've looked through the forums. (if I missed the question I am about to ask in the forums, can someone link me to it? I am new and this is my first time posting, but I have used this forum to help me before)Well...Where do I begin....I rooted my Motorola Defy for the first time(this is my second Defy as my old on had hardware issues) and I decided to try to install a custom ROM(CM7). So I looked into it and downloaded Defy2int from the Android Market. I installed it and once it was done, I rebooted my phone and now it will not get passed the Motorola "M". It will load that "M" then turn off and start up again. Every time I plug it into the USB, a white light shows in the LED. I have tried factory reset and nothing. I know about the RSD lite, but my device is not connecting. Is there still a way to connect it? If so can someone please help me and work with me step by step so I do not mess up my phone further....Thank you :/
Click to expand...
Click to collapse
Make sure you don't have any other USB connection made to your PC.I had same problem..Also if problem still exists try another system.

[Completed] [Q] Black Screen of Death

Hi everyone ! I am new to forum, so please forgive me if I post into the wrong category .
I have a very big problem with my phone (LG L3 Optimus E400) . I have installed a lot of custom roms on it and yesterday I realized that the current rom I was using doesn't receive text messages so I decided to try antoher one and I had the "great" idea to Flash v20 Baseband for flashing SlimBeane610 rom. That was very silly. After I flashed the rom, I rebooted my phone and nothing happened, screen is black all the time. When I press the power button the phone vibrates and the back and menu buttons lights up for 1 second like normal log on, then boom, all goes black again and if I don't remove the battery and I press the power button or any combination (like Reset, Emergency mode) doesn't work. I googled everything, I found something on this forum but not very useful. I tried wit adb but my phone isn't on so it can't be recognized. I tried wit KDZ Updater (until the phone was recognized) but I get a error like WParam: 100 and LParam: 500. When I connect it with USB sounds are playing like normal and Mobogenie wants to connect with it but I can't enable USB Debugging so it's pissing me off . If I can enable USB Debuggins from PC somehow, maybe I can connect phone with Mobogenie and make a restore , a backup or flash another rom, it would be easy If I can go into recovery or emergency mode but I can't . If it would exist a software that can erase everything on the phone when the it's turned off ... .I tried with LG TOOLS, LG PC SUITE IV, LG FLASH TOOLS, Android MULTI TOOLS and nothing(i have the latest drivers installed). Can I make something to it using the external_sd (like put a flash into it, connect it through PC via USB cable and try to flash a rom from command prompt but I don't know the paths). This is a very hard problem, I have a bricked L3 and I don't know hot to unbrick, I think isn't only a soft problem, maybe I should do something with its hardware ? If anyone could help I would really appreciate .
Thanks in advance !
PS : I won't be able to follow this conversation until the next week because I am going to "Primitive Age" right now...oh God, I'm only good to smash things . :crying:
PodGom said:
The most important thing is, can you see the LG logo that shows up in normal boot? If you don't, it'd be either a screen problem or a hard brick. Nobody except LG can fix these problems, and you would have to pay LG some money to fix the phone. But if you DO see the LG logo and your phone stops, you can try the below options.
It just may be bricked, and you could try getting into recovery and flash an alternative ROM. But if that doesn't work, tryLG mobile support tools to get it back to its stock firmware. Good Luck!
Click to expand...
Click to collapse
No, I can't see the LG logo . If I could saw the LG screen was very easy to fix it. I think the phone it's really dead and I also think that even an authorized service can't fix it . Do you know an approximately price for fixing this issue ? Thanks .
Hi,
You should definitely ask the experts who own your device for help, Here...
http://forum.xda-developers.com/optimus-l3-l5-l7/help
Good luck!
Thank you. Thread closed.

[Q] htc one sv Hard bricked DLOAD MODE plzz help quick

Hi i used app to root my phone and used a app to unlock boot loader. when I used the app to root my phone it worked for a little bit then it would reboot. well when it was rooted i got a app and unlocked boot loader and used clockworthmod and tried to go into recovery when i did that it wouldent power i have tried press buttons wont work. when i connect to PC i get DLOAD MODE the light on the phone will stay solid orange but when it sits for a few mins. it will start blinking and the PC doesn't recognize it. is there any way to fix. PLZ help answer quick. THX
Sir,
Please wait until mods will move this thread to the device specific forum for more relevant answers.
Stand by
Good luck

[Completed] SAMSUNG TAB2 Stuck on BootLoop please Help me!!!

Hello Guys
So i recently purchased a samsung tablet (gt-n8013) it was working fine, i put it to charged came back from work and it wouldn't bootup ,it stuck at the samsung logo..I checked online (google and youtube) and it seems like a common issue with that tablet (thank you samsung), i tried almost everything, hard reset, root the tablet and nothing seems to be working. I also noticed my laptop doesn't recognized the device after i download the latest firmware from samsung,i tried different softwares like Odin or kies none of them wouldn't recognized the device, so it was impossible to root my tablet..i bought a new usb cable and tried the same steps on a different pc still nothing...Its been two weeks now still not working and i don't know what else to do, if anyone ran to the same problem and knows how to fix it ,could you kindly help me resolve this issue or point me out to the right direction PLEASE!!!..Thank you.
Hi, first, please don't make duplicate threads, http://forum.xda-developers.com/postings.php?t=3131512&pollid= We do this on our free time and sometimes it takes us awhile to respond
Your best bet is to ask for help in your device's forum here, http://forum.xda-developers.com/galaxy-note-10-1. But sometimes device's just die. Odin is your best chance to get it working again. With your device booted into download mode and connected to your pc does device manager show anything? Maybe an icon with a yellow exclamation mark.
Thread closed.

Categories

Resources