[q] stock jelly bean 4.2.2 - Micromax A110

Is there a stock jelly bean 4.2.2? cause all I have is a stock 4.1.1 where in almost all of custom rom uses 4.2.2 and I cant seem to let the proximity sensor work if I flash custom kernels and when I flash custom roms running 4.2.2 and stick at stock kernel 4.1.1 proximity sensors work but I get errors such as messaging has stopped and ohmacp has stopped, how do you manage to make proximity work on 4.2.2 custom roms and whatever kernels are you using? tried Bindass Boost v2.7 and v2.5 and also Xtreme Rejoice but it doesnt work, although flashing back to stock rom fixed the proximity sensor bug

Try this
ponnex said:
Is there a stock jelly bean 4.2.2? cause all I have is a stock 4.1.1 where in almost all of custom rom uses 4.2.2 and I cant seem to let the proximity sensor work if I flash custom kernels and when I flash custom roms running 4.2.2 and stick at stock kernel 4.1.1 proximity sensors work but I get errors such as messaging has stopped and ohmacp has stopped, how do you manage to make proximity work on 4.2.2 custom roms and whatever kernels are you using? tried Bindass Boost v2.7 and v2.5 and also Xtreme Rejoice but it doesnt work, although flashing back to stock rom fixed the proximity sensor bug
Click to expand...
Click to collapse
Hi ponnex,
Try these steps to install zip(ROM) form CWM, will help:
1) Goto CWM --> install zip from SD card --> select the ROM zip file --> it will start installing the ROM -->Then --> Wipe data/factory reset --> Wipe cache partition --> then goto --> advanced--> Wipe dalvik cache --> Wipe battery stats --> Go back --> reboot system now.
2) Then install the Xtreme Rejoice Kernel: http://d-h.st/87R, and follow the same steps as done after installing the ROM zip (Wipe data/factory reset --> Wipe cache partition --> then goto --> advanced--> Wipe dalvik cache --> Wipe battery stats --> Go back --> reboot system now).
Let me know if this worked for you. This should work:good:
HIT THANKS IF THIS HELPS!

@B#! said:
Hi ponnex,
Try these steps to install zip(ROM) form CWM, will help:
1) Goto CWM --> install zip from SD card --> select the ROM zip file --> it will start installing the ROM -->Then --> Wipe data/factory reset --> Wipe cache partition --> then goto --> advanced--> Wipe dalvik cache --> Wipe battery stats --> Go back --> reboot system now.
2) Then install the Xtreme Rejoice Kernel: http://d-h.st/87R, and follow the same steps as done after installing the ROM zip (Wipe data/factory reset --> Wipe cache partition --> then goto --> advanced--> Wipe dalvik cache --> Wipe battery stats --> Go back --> reboot system now).
Let me know if this worked for you. This should work:good:
HIT THANKS IF THIS HELPS!
Click to expand...
Click to collapse
Thank you for the tip sir apparently been doing the right method ever since but somehow the kernel source of every custom kernel have different sensor configuration than ours - MyPhone A919 Duo
I guess Ill stick to our stock rom and make out the best of it
Thanks!

Related

[Q] How to Install Brand New OS for Nexus S

Hi All,
Is there any guide on installing a brand new OS for Nexus S (GT-I9020T) ? Somehow my OS crushed and during boot up it stucks on the Google Screen.
Thnx !
Kees
1. enter recovery mode (clockwork mod)
2. wipe data/factory
3. wipe cache partition
4. advanced -> wipe dalvik cache
5. same menu -> wipe battery stats
6. install new rom and you are ready
manthos1978 said:
1. enter recovery mode (clockwork mod)
2. wipe data/factory
3. wipe cache partition
4. advanced -> wipe dalvik cache
5. same menu -> wipe battery stats
6. install new rom and you are ready
Click to expand...
Click to collapse
Thanks for the help. Can you please advice any up to date or ''safe'' ROM ?
And it is okay to install from SD Card directly ?
Cheers
Kees
karabaci said:
Thanks for the help. Can you please advice any up to date or ''safe'' ROM ?
And it is okay to install from SD Card directly ?
Cheers
Kees
Click to expand...
Click to collapse
It is advisable to install from SD card, so yes.
Stock OTA 4.1.2 Jelly Bean ROM is the safest. So i recommend this one: http://d-h.st/t7o
It is stock over-the-air ROM from google with a few added features you may need.
source: http://forum.xda-developers.com/showthread.php?t=1854366
If you want more features you can try stable releases of ROMs posted on the development section.
ej8989 said:
It is advisable to install from SD card, so yes.
Stock OTA 4.1.2 Jelly Bean ROM is the safest. So i recommend this one: http://d-h.st/t7o
It is stock over-the-air ROM from google with a few added features you may need.
source: http://forum.xda-developers.com/showthread.php?t=1854366
If you want more features you can try stable releases of ROMs posted on the development section.
Click to expand...
Click to collapse
Thanks for the advice !
I followed the steps above but when I try to install the pack getting an error of ''Status 7''
Any idea ? or recommendation ?
Ps: I attached the SS
Thnx
Kees
karabaci said:
Thanks for the advice !
I followed the steps above but when I try to install the pack getting an error of ''Status 7''
Any idea ? or recommendation ?
Ps: I attached the SS
Thnx
Kees
Click to expand...
Click to collapse
You need to update your custom recovery.
Download CWM 6.0.1.0 here: http://download2.clockworkmod.com/recoveries/recovery-clockwork-touch-6.0.1.0-crespo.img
Put it anywhere in your pc, or even on your sdcard.
Then go to command prompt and type fastboot flash recovery <put EXACT img file location and name here>
Thank you all !
It is back now
Last question: Is my phone going to make system updates via internet automatically ?
Regards
Kees
karabaci said:
Thank you all !
It is back now
Last question: Is my phone going to make system updates via internet automatically ?
Regards
Kees
Click to expand...
Click to collapse
Because you have a custom recovery, no.
That's the advantage of using a custom recovery though, you can just download and flash any newly updated ROM/s instead of waiting for the official google update.

[Q] Tf 101 can't change ROM or install Clock work Recovery

Hello
I am new to this forum, I could not find any answers, so I desided to register and ask.(I am a noob in this stuff)
I have a Transformer tf101 which I have roted with Revolver some time ago (I think it was Revolver, how to check that?). My goal now is to overclock the tab.
I have been trying to follow some instructions begining with installing Clock work mod recovery, but when I start the tab with volume.down+power and than push Vol.up I get a picture of android guy with open stomach and warning triangle.
Am doing something very wrong? Where should I begin istead?
Will be very thankfull for anwers
You don't have a custom recovery installed, and don't use CWM
Use TWRP recovery
Install Goo Manager from here
https://play.google.com/store/apps/details?id=com.s0up.goomanager&hl=en
Open Goo Manager, tap the top right menu dots, choose "Install OpenRecovery script"
That should install TWRP for you, then you can do your vol down and power to enter recovery
Thanks, that worked!
So I backed up my System, Boot, Recovery and Cache now.(Do not need Data)
What do I do now? Should I install some custom Kernel now? I wish to go to 1,5 Ghz, which one is the most popular out there?
Koss372 said:
Thanks, that worked!
So I backed up my System, Boot, Recovery and Cache now.(Do not need Data)
What do I do now? Should I install some custom Kernel now? I wish to go to 1,5 Ghz, which one is the most popular out there?
Click to expand...
Click to collapse
No need to backup Cache, Cache and Dalvik cache are basically just temp folders
Now you should find a decent jellybean ROM and Kernel and Gapps (Google Apps)
Obviously I suggest the latest Team EOS4 Jellybean Nightly #116
Kat Kernel #103 too for lots of nice tweaks and OCing ability
And grab the latest Gapps from the 1st post in EOS4 thread (See my sig for links)
1. Wipe Cache and Dalvik Cache
2. Wipe System (and Data if you're coming from and old ROM)
3. Flash ROM
4. See 1.
5. Flash Kernel
6. See 1.
7. Flash Gapps
8. See 1.
9 Reboot and enjoy Jellybean 4.2.2
So after wiping Cache, Dalvik Cache and System, I inserted SD card With "EOS4 Jellybean Nightly #116", went into install menu in TWRP and flashed it. TWRP gave suggestion to clear Cache/Dalvik Cache and I pressed that button too. I am not sure now which kernel to download because there is "KatKernel_103_JB4.2_Lidpatch.zip" and "KatKernel_103_JB4.2_Lidpatch_CM10.1.zip" for JB 4.2.2. Which should I take?
KatKernel_103_JB4.2_Lidpatch.zip
You're running EOS4 not CM10.1
And you'll need these Gapps
http://goo.im/devs/teameos/roms/eos4/gapps/gapps_4.2.2_TF101_20130323b.zip
Thanks for help! Now my CPU benchmark at 1,5ghz is integer=1953; floatpoint=1703 vs 1ghz where integer=1280 floatpoint=1129. Tested with Antutu. It actually allows me to go up to 1,7ghz, but I bet it is not safe.
No problem, I haven't heard of many running at 1.7, I leave mine at 1.4, seems a good mix of performance and battery life
If you goto Settings > EOS Control Centre > Navigation > UI Mode
You can change the UI back to Tablet Bar and get 100% smooth homescreens again too
I tested 1.7ghz but it restarted immediately. I missed the UI mode:good:

[ROM] [cm10.2] cyanogenmod 10.2 jiayuG4B/t/A

FIRST OF ALL, I DIDN'T CREATE OR PORT THIS ROM. I FOUND THIS ROM A WHILE AGO ON THE INTERNET AND I'M JUST SHARING THIS.
As the title says, this is cyanogenmod 10.2 for jiayu g4t/B/A
THIS VERSION ISN'T WORKING PROPERLY. THERE ARE A LOT OF FEATURES THAT DON'T WORK, AS EXAMPLE: THE CAMERA, FM RADIO,... THE USUAL FOR CM ON MTK...
THOUGH YOU CAN USE THIS ROM IF YOU WANT TO TASTE CYANOGENMOD, THEME CHOOSER,... WIFI AND SMS ETC ARE WORKING
installing instructions:
1) enter cwm
2) make backup of current rom, you will be happy you did
3) wipe data/factory reset
4) wipe cache partition
5) advanced -> wipe dalvik cache
6) reboot
download link: https://drive.google.com/open?id=0B...V9jRzY1YUFwdmQtU1E4YVE4c3dIZERxamM&authuser=0

Dual booting with MIUI 7

Using 6.0.5.0 r8 CWM recovery.Everytime I enable TDB with MIUI 7 installed and move data to system 2.All the gapps and some other apps like browser disappear from MIUI 7(present in system 2).I've tried both with taking a backup and restoring(to system 2) and also with fresh install of MIUI 7 to system 2 but even then the same error occur.
What may be the problem?Has any one faced the same issue and resolved it?
On a second note,I tried using 6.0.5.1 r11 recovery but there is no option of 'current system' present in advanced options.Why is that?
That's CWM bug. Use CWM R7 Final recovery
To get dual boot working you have to perform steps in this order.
1) Assuming you have MIUI working, go to recovery and make nandroid backup of it. (If not then flash MIUI & then make nandroid backup)
2) perform wipe/factory reset from recovery, wipe cache, dalvik cache, format both systems
3) now enable TDB from advance settings
4) reboot recovery (you will see fixing TDB on system 1, 2)
5) Flash custom ROM (only that works with stock partition) on System 1
6) boot and setup (I am not sure if its necessary to boot)
7) go back to recovery and restore nandroid backup of MIUI on system 2
I wouldn't recommend dual boot, its buggy. Makes phone slow over the time.
Better wait for MultiROM mod which is already in development for MI4

[Updated to v5.10.29] [Xolo Q3000] [ROM] MiUi7_v5.10.15 with updates

As it was a challenge @rohitsinghpu, here is MY 7th PORTED ROM for Xolo Q3000, with special thanks to:
1) Xolo for the awesome phone at affordable price,
2) MIUI for the wonderful rom,
3) Of course, me for Custom Boot Logo, Re-partitioning (/system - 1gb ) & Porting ROM for Xolo Q3000.
Pre-requisites:
1) Custom recovery such as TWRP, CWM, PhilzTouch(TWRP 2.8.4 rev2 prefered, as I've tested rom using this recovery)
2) Before proceeding, Back up your Current Rom (Failsafe).
3) /System minimum 1gb partition (Repartition your phone, before you flash this ROM).
4) SP Flash Tools & Stock rom (In case, If you are in trouble).
Procedure:
1) Put the downloaded MiUi7_v5.10.15 by Sachin.zip in sd card.
2) Reboot to Recovery using root apps or by pressing (PowerOn + VolumeUp) key combination.
3) If you are on MiUi ROM, Wipe Cache, Dalvik Cache, Android Secure using Advanced Wipe, else perform Full Wipe.
4) Install MiUi7_v5.10.15 by Sachin.zip
5) Wipe Cache & Dalvik Cache & Reboot.
9) Phone will get upgraded to newer version, without losing any data.
10) If u face any problem or want to flash as clean install, then wipe data as well as system, alongwith Dalvik & Cache, before flashing rom.
WARNING:
I WILL NOT BE RESPONSIBLE FOR ANY DAMAGE TO YOUR DEVICE. EVEN THOUGH, I'VE TESTED & USING IT ON MY DEVICE. TRY AT YOUR OWN RISK.
HOWEVER, I WILL BE AVAILABLE, ALWAYS, TO HELP YOU & SOLVE THE PROBLEMS FACED BY YOU.
Features:
1) Everything from MIUI working fine
2) Latest Google Keybord
3) WSM Tools Pre-Installed
4) SuperUser & BusyBox installed
5) MIUI Video as default media player
6) WiFi Direct working
7) Advanced power menu
8) Custom Boot Logo
9) Full changelog at: http://en.miui.com
Bugs:
Nearly Bugless ROM, few minor bugs are as follows:
1) Some of the Icons missing when using default theme(Change the theme).
2) Report, if you found any.
Note:
For Engineer Mode, dial *#*#3646633#*#*,
Download Links:
1) MiUi7_v5.10.15 Full ROM
All the Best, Guys......
Screenshots:
https://drive.google.com/open?id=0B9c3NsdJ2PscTlE2WVJid2lwX3c
Updates:
If you are using TWRP, Open Updater application or Launch From Settings/About Phone/System updates, from options(top right corner), select Choose Update Package, locate the OTA.zip file. Wait for Updater to finish the job, phone will reboot to recovery & then to updated version.
Also, if you are on twrp or any other recovery, you can update as follows:
reboot to recovery and flash ota.zip, wipe cache & dalvik, reboot.
1) MiUi7_v5.10.15 to 5.10.22_OTA
2) MiUi7_v5.10.22 to 5.10.29_OTA
Bug Fixes:
Great work bro, i ws missing wsm tool as it ws not compatible with roith bro port, it gave fc n random reboot, i tried many wsm version, then fount it ws instability in rom, ( sorry no offense roith bro, u did ur best and im thankfull to u)
Sachin bro, i always look forward to ur work?
Thanks fr making update easyy, downloading now, will review later
sachin.r.fulzele said:
Updates:
Open Updater application or Launch From Settings/About Phone/System updates, from options(top right corner), select Choose Update Package, locate the OTA.zip file. Wait for Updater to finish the job, phone will reboot to recovery & then to updated version.
1) MiUi7_v5.10.15 to 5.10.22_OTA
2) MiUi7_v5.10.22 to 5.10.29_OTA
Click to expand...
Click to collapse
Thanks for the beautiful rom.
Sir when I tried to install ota updates from system updates it is going to recovery and saying installation aborted. Any other way to install these ota updates?
Rom is completely stable bro, theme stays even aftr reebot, all xposed modules working good, no lag, giving good battery backup,
Is there any ideas to port other roms from turkdevs
forum.turkdevs.com/konu-4-4-2-xperia™-z3-v5-1-final-for-gm-discovery.html
forum.turkdevs.com/konu-4-4-2-art-samsung-galaxy-s6-rom-for-gm-discovery.html
forum.turkdevs.com/konu-port-ios-8-ayfone-rom-v1.html
These r the few roms i like to get my hands on bro,
iaditya91 said:
Thanks for the beautiful rom.
Sir when I tried to install ota updates from system updates it is going to recovery and saying installation aborted. Any other way to install these ota updates?
Click to expand...
Click to collapse
U must be on twrp to update in the mentioned way. If u r on any other recovery, flash as a normal zip from recovery.
Jagadish-ravi said:
Rom is completely stable bro, theme stays even aftr reebot, all xposed modules working good, no lag, giving good battery backup,
Is there any ideas to port other roms from turkdevs
forum.turkdevs.com/konu-4-4-2-xperia™-z3-v5-1-final-for-gm-discovery.html
forum.turkdevs.com/konu-4-4-2-art-samsung-galaxy-s6-rom-for-gm-discovery.html
forum.turkdevs.com/konu-port-ios-8-ayfone-rom-v1.html
These r the few roms i like to get my hands on bro,
Click to expand...
Click to collapse
Xperia z3 & galaxy s6 rom will be posted after 9 November, as my exams are running.
sachin.r.fulzele said:
Xperia z3 & galaxy s6 rom will be posted after 9 November, as my exams are running.
Click to expand...
Click to collapse
Awesome bro :thumbup::thumbup:
Does security and cleaner app works fine or still has reboot issues...
Inbuilt browser fc..

Categories

Resources