Hello
I am new to this forum, I could not find any answers, so I desided to register and ask.(I am a noob in this stuff)
I have a Transformer tf101 which I have roted with Revolver some time ago (I think it was Revolver, how to check that?). My goal now is to overclock the tab.
I have been trying to follow some instructions begining with installing Clock work mod recovery, but when I start the tab with volume.down+power and than push Vol.up I get a picture of android guy with open stomach and warning triangle.
Am doing something very wrong? Where should I begin istead?
Will be very thankfull for anwers
You don't have a custom recovery installed, and don't use CWM
Use TWRP recovery
Install Goo Manager from here
https://play.google.com/store/apps/details?id=com.s0up.goomanager&hl=en
Open Goo Manager, tap the top right menu dots, choose "Install OpenRecovery script"
That should install TWRP for you, then you can do your vol down and power to enter recovery
Thanks, that worked!
So I backed up my System, Boot, Recovery and Cache now.(Do not need Data)
What do I do now? Should I install some custom Kernel now? I wish to go to 1,5 Ghz, which one is the most popular out there?
Koss372 said:
Thanks, that worked!
So I backed up my System, Boot, Recovery and Cache now.(Do not need Data)
What do I do now? Should I install some custom Kernel now? I wish to go to 1,5 Ghz, which one is the most popular out there?
Click to expand...
Click to collapse
No need to backup Cache, Cache and Dalvik cache are basically just temp folders
Now you should find a decent jellybean ROM and Kernel and Gapps (Google Apps)
Obviously I suggest the latest Team EOS4 Jellybean Nightly #116
Kat Kernel #103 too for lots of nice tweaks and OCing ability
And grab the latest Gapps from the 1st post in EOS4 thread (See my sig for links)
1. Wipe Cache and Dalvik Cache
2. Wipe System (and Data if you're coming from and old ROM)
3. Flash ROM
4. See 1.
5. Flash Kernel
6. See 1.
7. Flash Gapps
8. See 1.
9 Reboot and enjoy Jellybean 4.2.2
So after wiping Cache, Dalvik Cache and System, I inserted SD card With "EOS4 Jellybean Nightly #116", went into install menu in TWRP and flashed it. TWRP gave suggestion to clear Cache/Dalvik Cache and I pressed that button too. I am not sure now which kernel to download because there is "KatKernel_103_JB4.2_Lidpatch.zip" and "KatKernel_103_JB4.2_Lidpatch_CM10.1.zip" for JB 4.2.2. Which should I take?
KatKernel_103_JB4.2_Lidpatch.zip
You're running EOS4 not CM10.1
And you'll need these Gapps
http://goo.im/devs/teameos/roms/eos4/gapps/gapps_4.2.2_TF101_20130323b.zip
Thanks for help! Now my CPU benchmark at 1,5ghz is integer=1953; floatpoint=1703 vs 1ghz where integer=1280 floatpoint=1129. Tested with Antutu. It actually allows me to go up to 1,7ghz, but I bet it is not safe.
No problem, I haven't heard of many running at 1.7, I leave mine at 1.4, seems a good mix of performance and battery life
If you goto Settings > EOS Control Centre > Navigation > UI Mode
You can change the UI back to Tablet Bar and get 100% smooth homescreens again too
I tested 1.7ghz but it restarted immediately. I missed the UI mode:good:
Related
With the recent update of CWM/PBJ kernel I'd like to update to the latest ones and I'd also like to switch ROMs to test some other ones out. Can someone guide me through this? I've never switched before I just followed (http://forum.xda-developers.com/showthread.php?t=1122657), that's it(as far as flashing and such goes). I'd just like an easy to follow guide on updating the Kernel/CWM and installing a new ROM(If and when I'd need to disable Voodoo, if flashing something will reset all my contacts/apps, etc) I'd really appreciate it and thanks will be in order for anyone and everyone who is helpful :]
Info: I'm running 6/15 PBJ OC kernel with 1.8.5 Gummycharged ROM
There's not much to it. kernel and Rom can be updated in CWM.
Download the rom you want to flash to /sdcard (root of your sdcard)
reboot into recovery. If you do not have the option holding down the power button and hitting restart. Dl a terminal emulator and type:
Code:
$su (to gain root)
#reboot recovery
Wipe Cache and factory data reset
Go to advanced: Wipe Dalvik cache and battery settings
scroll to flash with a zip
choose: select zip from sdcard
choose the zip that you downloaded
once the install is complete reboot phone. let rom install
Follow same thing for Kernel. Just make sure you remember what the name of your kernel is.
dragonstalker said:
There's not much to it. kernel and Rom can be updated in CWM.
Download the rom you want to flash to /sdcard (root of your sdcard)
reboot into recovery. If you do not have the option holding down the power button and hitting restart. Dl a terminal emulator and type:
Code:
$su (to gain root)
#reboot recovery
Wipe Cache and factory data reset
Go to advanced: Wipe Dalvik cache and battery settings
scroll to flash with a zip
choose: select zip from sdcard
choose the zip that you downloaded
once the install is complete reboot phone. let rom install
Follow same thing for Kernel. Just make sure you remember what the name of your kernel is.
Click to expand...
Click to collapse
That works a treat thank you.
Easier way to get into CWM: hold down Power+Volume Up+Home until you see SAMSUNG, let go, and you'll boot straight into recovery. No need to mess around with terminal commands.
Also, when flashing a kernel only (not a ROM), there's no need to wipe data.
I'm running CM7 on my G2X alongside Trinity kernel. I've got ROM Manager Premium on my phone to check nightlies. Whenever I get an update notification I do the following:
1) download the nightly
2) reboot into recovery
3) format /system
4) format Dalvik
5) format cache
6) install nightly
7) install google apps
8) install Trinity
I would like to find a way to automate steps 3-8 in ClockworkMod. I'm currently running 4.0.0.2. Does anybody know of a way to accomplish this?
mastermindg said:
I'm running CM7 on my G2X alongside Trinity kernel. I've got ROM Manager Premium on my phone to check nightlies. Whenever I get an update notification I do the following:
1) download the nightly
2) reboot into recovery
3) format /system
4) format Dalvik
5) format cache
6) install nightly
7) install google apps
8) install Trinity
I would like to find a way to automate steps 3-8 in ClockworkMod. I'm currently running 4.0.0.2. Does anybody know of a way to accomplish this?
Click to expand...
Click to collapse
You format system for every nightly? Good Lord, man....just wipe dalvik and cache...in fact, if you just use Rom Manager, and hit the options to only wipe dalvik and install gapps, it will do the rest for you.
I'm not just installing the nightly...hence the reason for this post. I'm also installing a custom kernel as well. This needs to be done alongside the nightly.
And...for the record...formatting /system is only one additional step in 8 steps and it's not even the longest one.
mastermindg said:
I'm not just installing the nightly...hence the reason for this post. I'm also installing a custom kernel as well. This needs to be done alongside the nightly.
And...for the record...formatting /system is only one additional step in 8 steps and it's not even the longest one.
Click to expand...
Click to collapse
No need to format even if reinstalling the kernel. You should
1)wipe dalvik/cache
2)flash nightly
3)flash kernel
Lol...
NOTE: This is for users who did the BigPart Repartitioning (probably for flashing a 4.4.2 ROM) on their Xoom and for any reason want to go back to normal.
What You Need:
-TWRP 2.6.3.0 touch recovery from @runandhide05
-TWRP 2.6.3.0 BigPart touch recovery from @runandhide05 (if you're reading this you should already have this installed no need to download)
-Your Favorite Standard Partition ROM
Instructions:
1. Reboot Into Recovery (You should have already installed TWRP2.6.3.0 BigPart)
2. Flash the non-BigPart TWRP 2.6.3.0 (Do not Reboot)
3. Tap the Home Icon
4. Wipe > Advanced > WIPE Davlik, System, Cache, Data and Internal Storage
5. Tap Home
6. Reboot into Recovery (Ignore NO OS and Ignore SuperSU)
7. Booting the nonBigPart Recovery will take a while just be patient.
8. Ignore the “Password” screen > Tap Home
9. Wipe > Format Data > Type “yes”
10. Wipe > Advanced > WIPE System and Cache
11. Tap Home
12. Reboot Into Recovery (Again Ignore No OS and SuperSU)
13. Mount > Sdcard, Cache, and Data should be checked; System should be unchecked. Tap the box next to System, make sure that it mounts without any errors, and then unchecked it again. If you've made it this far, you’re back to the standard partitions.
14. Now you can Flash your favorite Standard Partition ROM and corresponding GApps.
Thanks To:
@webeougher (for the Stingray losing data solution tutorial)
@bigrushdog (for the hard work on BigPart)
@realjumy (for the hard work on BigPart)
[RESERVED]
This deserves endless "THANKS!"...
I managed to "undo" the BigPart following your tutorial in just 10 minutes... many many many thanks for summarizing everything in a single and concise post.
many thanks!
Ditto of above post. Works wonderful just follow instructions
No problem Here to help & learn!
And this is the solution that I look for, thank you
Non-Bigpart TWRP 2.6.3.0 touch recovery from @runandhide05 link is gone...damn it...
charos said:
Non-Bigpart TWRP 2.6.3.0 touch recovery from @runandhide05 link is gone...damn it...
Click to expand...
Click to collapse
I still have a copy, uploaded to box here :
https://app.box.com/s/p6jb4e51zd64h7qfadoyebwpkfdqod63
Both versions of 2.6.3 (bigpart and non-bigpart)
Let me know if any issues downloading from box
Sent from my Nexus 4 using Tapatalk
charos said:
Non-Bigpart TWRP 2.6.3.0 touch recovery from @runandhide05 link is gone...damn it...
Click to expand...
Click to collapse
moved files off dev-host
to much malware/ misleading links to download
https://www.androidfilehost.com/?fid=95916177934538765
there is the zip
all my files are going to android file host now
Thank you for this,i have 2 Wingrays ,both bigparted but i wanted 1 back to stock partition so i can unroot for my son to use for the Sky app on.
worked 1st time, you weren't kidding that installing twrp (non bigpart) takes a while to install, i thought i had done something wrong.
Thanks again
Thanks a lot for the great instructions! Saved my day!
Skickat från min SM-G920F via Tapatalk
Still in 2020 I want t thank you for this great guide for reverting back to stock! I had my xoom laying around unused and want to give to someone, but the best thing is to have it in stock conditions.
Thanks!
It's 2022 and it is still useful. Thanks!
Using 6.0.5.0 r8 CWM recovery.Everytime I enable TDB with MIUI 7 installed and move data to system 2.All the gapps and some other apps like browser disappear from MIUI 7(present in system 2).I've tried both with taking a backup and restoring(to system 2) and also with fresh install of MIUI 7 to system 2 but even then the same error occur.
What may be the problem?Has any one faced the same issue and resolved it?
On a second note,I tried using 6.0.5.1 r11 recovery but there is no option of 'current system' present in advanced options.Why is that?
That's CWM bug. Use CWM R7 Final recovery
To get dual boot working you have to perform steps in this order.
1) Assuming you have MIUI working, go to recovery and make nandroid backup of it. (If not then flash MIUI & then make nandroid backup)
2) perform wipe/factory reset from recovery, wipe cache, dalvik cache, format both systems
3) now enable TDB from advance settings
4) reboot recovery (you will see fixing TDB on system 1, 2)
5) Flash custom ROM (only that works with stock partition) on System 1
6) boot and setup (I am not sure if its necessary to boot)
7) go back to recovery and restore nandroid backup of MIUI on system 2
I wouldn't recommend dual boot, its buggy. Makes phone slow over the time.
Better wait for MultiROM mod which is already in development for MI4
As it was a challenge @rohitsinghpu, here is MY 7th PORTED ROM for Xolo Q3000, with special thanks to:
1) Xolo for the awesome phone at affordable price,
2) MIUI for the wonderful rom,
3) Of course, me for Custom Boot Logo, Re-partitioning (/system - 1gb ) & Porting ROM for Xolo Q3000.
Pre-requisites:
1) Custom recovery such as TWRP, CWM, PhilzTouch(TWRP 2.8.4 rev2 prefered, as I've tested rom using this recovery)
2) Before proceeding, Back up your Current Rom (Failsafe).
3) /System minimum 1gb partition (Repartition your phone, before you flash this ROM).
4) SP Flash Tools & Stock rom (In case, If you are in trouble).
Procedure:
1) Put the downloaded MiUi7_v5.10.15 by Sachin.zip in sd card.
2) Reboot to Recovery using root apps or by pressing (PowerOn + VolumeUp) key combination.
3) If you are on MiUi ROM, Wipe Cache, Dalvik Cache, Android Secure using Advanced Wipe, else perform Full Wipe.
4) Install MiUi7_v5.10.15 by Sachin.zip
5) Wipe Cache & Dalvik Cache & Reboot.
9) Phone will get upgraded to newer version, without losing any data.
10) If u face any problem or want to flash as clean install, then wipe data as well as system, alongwith Dalvik & Cache, before flashing rom.
WARNING:
I WILL NOT BE RESPONSIBLE FOR ANY DAMAGE TO YOUR DEVICE. EVEN THOUGH, I'VE TESTED & USING IT ON MY DEVICE. TRY AT YOUR OWN RISK.
HOWEVER, I WILL BE AVAILABLE, ALWAYS, TO HELP YOU & SOLVE THE PROBLEMS FACED BY YOU.
Features:
1) Everything from MIUI working fine
2) Latest Google Keybord
3) WSM Tools Pre-Installed
4) SuperUser & BusyBox installed
5) MIUI Video as default media player
6) WiFi Direct working
7) Advanced power menu
8) Custom Boot Logo
9) Full changelog at: http://en.miui.com
Bugs:
Nearly Bugless ROM, few minor bugs are as follows:
1) Some of the Icons missing when using default theme(Change the theme).
2) Report, if you found any.
Note:
For Engineer Mode, dial *#*#3646633#*#*,
Download Links:
1) MiUi7_v5.10.15 Full ROM
All the Best, Guys......
Screenshots:
https://drive.google.com/open?id=0B9c3NsdJ2PscTlE2WVJid2lwX3c
Updates:
If you are using TWRP, Open Updater application or Launch From Settings/About Phone/System updates, from options(top right corner), select Choose Update Package, locate the OTA.zip file. Wait for Updater to finish the job, phone will reboot to recovery & then to updated version.
Also, if you are on twrp or any other recovery, you can update as follows:
reboot to recovery and flash ota.zip, wipe cache & dalvik, reboot.
1) MiUi7_v5.10.15 to 5.10.22_OTA
2) MiUi7_v5.10.22 to 5.10.29_OTA
Bug Fixes:
Great work bro, i ws missing wsm tool as it ws not compatible with roith bro port, it gave fc n random reboot, i tried many wsm version, then fount it ws instability in rom, ( sorry no offense roith bro, u did ur best and im thankfull to u)
Sachin bro, i always look forward to ur work?
Thanks fr making update easyy, downloading now, will review later
sachin.r.fulzele said:
Updates:
Open Updater application or Launch From Settings/About Phone/System updates, from options(top right corner), select Choose Update Package, locate the OTA.zip file. Wait for Updater to finish the job, phone will reboot to recovery & then to updated version.
1) MiUi7_v5.10.15 to 5.10.22_OTA
2) MiUi7_v5.10.22 to 5.10.29_OTA
Click to expand...
Click to collapse
Thanks for the beautiful rom.
Sir when I tried to install ota updates from system updates it is going to recovery and saying installation aborted. Any other way to install these ota updates?
Rom is completely stable bro, theme stays even aftr reebot, all xposed modules working good, no lag, giving good battery backup,
Is there any ideas to port other roms from turkdevs
forum.turkdevs.com/konu-4-4-2-xperia™-z3-v5-1-final-for-gm-discovery.html
forum.turkdevs.com/konu-4-4-2-art-samsung-galaxy-s6-rom-for-gm-discovery.html
forum.turkdevs.com/konu-port-ios-8-ayfone-rom-v1.html
These r the few roms i like to get my hands on bro,
iaditya91 said:
Thanks for the beautiful rom.
Sir when I tried to install ota updates from system updates it is going to recovery and saying installation aborted. Any other way to install these ota updates?
Click to expand...
Click to collapse
U must be on twrp to update in the mentioned way. If u r on any other recovery, flash as a normal zip from recovery.
Jagadish-ravi said:
Rom is completely stable bro, theme stays even aftr reebot, all xposed modules working good, no lag, giving good battery backup,
Is there any ideas to port other roms from turkdevs
forum.turkdevs.com/konu-4-4-2-xperia™-z3-v5-1-final-for-gm-discovery.html
forum.turkdevs.com/konu-4-4-2-art-samsung-galaxy-s6-rom-for-gm-discovery.html
forum.turkdevs.com/konu-port-ios-8-ayfone-rom-v1.html
These r the few roms i like to get my hands on bro,
Click to expand...
Click to collapse
Xperia z3 & galaxy s6 rom will be posted after 9 November, as my exams are running.
sachin.r.fulzele said:
Xperia z3 & galaxy s6 rom will be posted after 9 November, as my exams are running.
Click to expand...
Click to collapse
Awesome bro :thumbup::thumbup:
Does security and cleaner app works fine or still has reboot issues...
Inbuilt browser fc..