Database Info

System recovery

I've changed an file in the system. And it gives an error wich i cant remove
error:
AudioFX has stopped
Its popps up on the screen and by pressing OK it doesnt goes away.
How can i do a full system restore? of reflash CM 11S? Best trough adb.

Fopflugel said:
I've changed an file in the system. And it gives an error wich i cant remove
error:
AudioFX has stopped
Its popps up on the screen and by pressing OK it doesnt goes away.
How can i do a full system restore? of reflash CM 11S? Best trough adb.
Click to expand...
Click to collapse
Yeap, I think the solution is a factory reset on the recovery with reflashing the CM11S fastboot image.

Info4Geek said:
Yeap, I think the solution is a factory reset on the recovery with reflashing the CM11S fastboot image.
Click to expand...
Click to collapse
Thanks for helping me out!
I've allready did a factory reset on the recovery
So i do
Sorry but im quit noob at this
adb sideload cm-11.0-XNPH25R-bacon-signed-fastboot.zip
or with recovery
install with recovery
install update > install from internal hdd > select cm-11.0-XNPH25R-bacon-signed-fastboot.zip
--> gives error Footer is wrong
becuz of the popup i can't enable the USB debugging

Fopflugel said:
Thanks for helping me out!
I've allready did a factory reset on the recovery
So i do
Sorry but im quit noob at this
adb sideload cm-11.0-XNPH25R-bacon-signed-fastboot.zip
or with recovery
install with recovery
install update > install from internal hdd > select cm-11.0-XNPH25R-bacon-signed-fastboot.zip
becuz of the popup i can't enable the USB debugging
Click to expand...
Click to collapse
1. Download this toolkit: http://forum.xda-developers.com/oneplus-one/development/oneplus-one-toolkit-manudroid19-gui-t2807418
2. Open the software
3. Click Flash! in the Flash CM11S/Color Os part
4. Click Download CM11S
5. After the download you need to go on fastboot mode
6. Click Flash CM11S
7. Your phone is resetted

Info4Geek said:
1. Download this toolkit: http://forum.xda-developers.com/oneplus-one/development/oneplus-one-toolkit-manudroid19-gui-t2807418
2. Open the software
3. Click Flash! in the Flash CM11S/Color Os part
4. Click Download CM11S
5. After the download you need to go on fastboot mode
6. Click Flash CM11S
7. Your phone is resetted
Click to expand...
Click to collapse
Thank You Extremely much !!!!
It worked :laugh:

Fopflugel said:
Thank You Extremely much !!!!
It worked :laugh:
Click to expand...
Click to collapse
Perfect ☺
Sent from my OnePlus One

Big THUMB up!! I had the same AudioFx stopped issue and followed your post and now it's good again. THANKS!

[Q] No bootloader and recovery wont stay?

I am very confused. I pushed the newest OTA to my phone today and it appeared that It over wrote my customer recovery with the CM recovery. When I got home, I used my laptop to push the philz.img to my phone through fastboot. It installed and recovery booted and I was able to re-flash superSU.zip to re-root.
Now, every time I go into my recovery, it boots into the CM recovery vs Philz and for some reason I cannot get into my bootloader. When I reboot-> bootloader from my reboot screen, it brings me directly to fastboot vs the bootloader. Can someone please help me out. Why do I no longer have a bootloader and how can I get my recovery to stay?

When you see the gray CyanogenMod icon with the gray words "Fastboot Mode" that is bootloader mode ( http://i.imgur.com/VUjyuKs.jpg )
If you want your recovery to stick go into settings -> developer options -> update cm recovery (uncheck it) and then flash your recovery in fastboot mode or by using flashify.
Activate developer options by settings -> about phone -> tap build # 10 times -> back -> developer options if developer options is not enabled.

bradm23 said:
I am very confused. I pushed the newest OTA to my phone today and it appeared that It over wrote my customer recovery with the CM recovery. When I got home, I used my laptop to push the philz.img to my phone through fastboot. It installed and recovery booted and I was able to re-flash superSU.zip to re-root.
Now, every time I go into my recovery, it boots into the CM recovery vs Philz and for some reason I cannot get into my bootloader. When I reboot-> bootloader from my reboot screen, it brings me directly to fastboot vs the bootloader. Can someone please help me out. Why do I no longer have a bootloader and how can I get my recovery to stay?
Click to expand...
Click to collapse
The bootloader option is suppose to bring you to fastboot, that's the purpose of the bootloader reboot option.
As for recovery being over-written, in developer settings just disable "Update CM recovery" and reflash your recovery. It should no longer be overwritten when any new OTA's come out.

Thanks so much! I re-flashed philz in fastboot once I checked the setting in dev setting and it finally stuck!
As for bootloader, I guess I was just pictured the stock android on where is shows a bunch of phone info, and then says fastboot, recovery and reboot underneath

bradm23 said:
Thanks so much! I re-flashed philz in fastboot once I checked the setting in dev setting and it finally stuck!
As for bootloader, I guess I was just pictured the stock android on where is shows a bunch of phone info, and then says fastboot, recovery and reboot underneath
Click to expand...
Click to collapse
Yeah I prefer how the Nexus 5 styles the bootloader. It looks way better and its nice that you can use it to navigate to reboot to various parts of the phone (phone/recovery/bootloader/etc)
A lot of people migrating from N5 to OPO

(fixed)Back to stock recovery is not working

Hi guys!
I have installed twrp recently but i decided to install stock recovery back. After installing stock recovery still twrp appears.(tried it 3x times)
Any idea?
Thank you for your answers.

Are you using fastboot to flash the recovery? If so what gets displayed when it fails?

As BakedOnSomeSour said, stock recovery must be flashed through fastboot using the same command you used to flash TWRP, and so "fastboot flash recovery <recoveryname>.img". That's the only way to flash a recovery (unless that you use dload and reflash full firmware).

BakedOnSomeSour said:
Are you using fastboot to flash the recovery? If so what gets displayed when it fails?
Click to expand...
Click to collapse
I got a message: (remote:Commant not allowed).

killershan said:
I got a message: (remote:Commant not allowed).
Click to expand...
Click to collapse
Allow USB debug and OEM unlock by developer settings menu and retry... Plus, tell me what your fastboot says about FRP and Phone

BakedOnSomeSour said:
Are you using fastboot to flash the recovery? If so what gets displayed when it fails?
Click to expand...
Click to collapse
RedSkull23 said:
Allow USB debug and OEM unlock by developer settings menu and retry... Plus, tell me what your fastboot says about FRP and Phone
Click to expand...
Click to collapse
Phone:Unlocked Frp:Locked.

killershan said:
Phone:Unlocked Frp:Locked.
Click to expand...
Click to collapse
If FRP is locked, read my post above. OEM unlock must be enabled by developer options.
Anyway, procure yourself a valid copy of your actual firmware's recovery and retry a flash by fastboot. Then, try to boot directly to recovery

Thank you for your asnwers.Finally i fixed my problem.

Cant Flash Custom Recovery j710f

Hello everyone,ive issue about flashing custom recovery to my phone after i flash it to stock rom
Its android version is 8.1.0
Baseband version j710fxxu5brc3
Tnx

Lelouch? said:
Hello everyone,ive issue about flashing custom recovery to my phone after i flash it to stock rom
Its android version is 8.1.0
Baseband version j710fxxu5brc3
Tnx
Click to expand...
Click to collapse
you need to wipe the data partition after flashing it in twrp, then you can boot it

Also the error that im getting is recocery image check failed...sorry for late reply

michaeladige said:
you need to wipe the data partition after flashing it in twrp, then you can boot it
Click to expand...
Click to collapse
Do i have to do that at twrp recovery or at stock recovery?...sorry for noob question

Lelouch? said:
Do i have to do that at twrp recovery or at stock recovery?...sorry for noob question
Click to expand...
Click to collapse
twrp recovery

michaeladige said:
twrp recovery
Click to expand...
Click to collapse
Im still at stock recovery...how will i flash a twrp because when i flash it errors with recovery image check failed

Lelouch? said:
Im still at stock recovery...how will i flash a twrp because when i flash it errors with recovery image check failed
Click to expand...
Click to collapse
have you checked the OEM unlock option in the developer options in the settings??

Flash magisk and dont allow system r/w thats dm verify

michaeladige said:
have you checked the OEM unlock option in the developer options in the settings??
Click to expand...
Click to collapse
Yes

ORIGINALNAME123 said:
Flash magisk and dont allow system r/w thats dm verify
Click to expand...
Click to collapse
How can i flash it?

When i flash the magisk zip it errors with signature verification
When i try to root it or flash the patched magisk patched boot it errors with boot image signature check failed...
Sorry for late reply

Lelouch? said:
How can i flash it?
Click to expand...
Click to collapse
Look, i had this issue too i already said what to do.
1. Enable OEM unlock and USB debugging in developer settings
2. flash twrp (but don't boot into it)
3. boot up your phone to system
4. then boot to twrp and where it asks you to like enable system r/w or no select no
5. wipe data
6. from your laptop/pc move magisk.zip to phone
7. flash magisk
8. done

ORIGINALNAME123 said:
Look, i had this issue too i already said what to do.
1. Enable OEM unlock and USB debugging in developer settings
2. flash twrp (but don't boot into it)
3. boot up your phone to system
4. then boot to twrp and where it asks you to like enable system r/w or no select no
5. wipe data
6. from your laptop/pc move magisk.zip to phone
7. flash magisk
8. done
Click to expand...
Click to collapse
i flashed the twrp 3.2.3.0 after i boot up and boot to recovery it still the stock recovery

[Guide] Flashing TWRP & Granting Root Access (Magisk Systemless) - Red Magic 3

Use this guide to root for now for global rom: https://forum.xda-developers.com/red-magic-3/how-to/red-magic-3-root-guide-t3933148
Requirements:
- Unlocked Bootloader On Nubia Red Magic 3 (NX629J): https://forum.xda-developers.com/red-magic-3/how-to/guide-unlocking-red-magic-3s-bootloader-t3935630
- TWRP HERE: https://forum.xda-developers.com/red-magic-3/development/recovery-unofficial-twrp-nubia-red-t3962482 (CHINESE ROM ONLY)
- Latest Magisk stable zip transferred to your phone's storage (https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445)
- Charge the Nubia Red Magic to at least 50%.
- You need a USB cable to connect your phone to PC.
ADB Drivers for your PC
STEPS TO INSTALL TWRP (READ EVERYTHING CAREFUL BEFORE ATTEMPTING):
1) Enable the Developer Options
- To Enable Developer Options, Go to your Settings -> About -> Software Information -> More -> Now Tap on the Build Number 10 Times until you see a toast message “Developer options enabled“
2) Go back to settings -> Now you need to enable the OEM Unlock by going to Settings -> Developer Options and check the box for OEM Unlock and USB Debugging
3) Connect your phone to Computer using USB Cable to a USB 2.0 port.
4) Open a command prompt window on your computer and type: "adb devices"
5) You will see a pop up window on your phone to allow USB debugging on your phone. Click ok.
6) Now type the commannd "adb reboot bootloader"
7) Once your phone has rebooted into it's bootloader, type in the pc command prompt "fastboot devices". This will list the devices connected, your phone should show up.
8) Then, to flash twrp, enter "fastboot flash recovery recovery-TWRP-3.3.1-0528-NUBIA_REDMAGIC3-CN-wzsx150.img" in the command prompt.
9) Finally reboot into the twrp recovery from the phone menu after twrp is installed. Rebooting your phone will reflash Nubia's recovery if you dont do so after flashing.
10) Once in twrp, go to install, navigate to where you put the magisk zip, and install it.
12) Reboot your phone.

Always welcome bro. Anytime I available for help. If I know anything

Secretcow said:
Requirements:
- Unlocked Bootloader On Nubia Red Magic 3 (NX629J): https://forum.xda-developers.com/red-magic-3/how-to/guide-unlocking-red-magic-3s-bootloader-t3935630
- TWRP: https://drive.google.com/file/d/10CZ...w?usp=drivesdk - Thank you to sandeepkhatri for sharing!
- Latest Magisk stable zip transferred to your phone's storage (https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445)
- Charge the Nubia Red Magic to at least 50%.
- You need a USB cable to connect your phone to PC.
1) Enable the Developer Options
- To Enable Developer Options, Go to your Settings -> About -> Software Information -> More -> Now Tap on the Build Number 10 Times until you see a toast message “Developer options enabled“
2) Go back to settings -> Now you need to enable the OEM Unlock by going to Settings -> Developer Options and check the box for OEM Unlock and USB Debugging
3) Connect your phone to Computer using USB Cable.
4) Open a command prompt window on your computer and type: "adb devices"
5) You will see a pop up window on your phone to allow USB Debugging on your phone. Click ok.
6) Now type the commannd "adb reboot bootloader"
7) Once your phone has rebooted into it's bootloader, type in the command prompt "fastboot devices". This will list the devices connected, your phone should show up.
8) Then, to flash twrp, enter "fastboot flash recovery recovery-TWRP-3.3.1-0528-NUBIA_REDMAGIC3-CN-wzsx150.img" in the command prompt.
9) Finally type "fastboot reboot" into the command prompt.
10) After your phone restarts, select boot into recovery to boot into twrp.
11) Once there, go to install, navigate to where you put the magisk zip, and install it.
12) Reboot your phone.
Click to expand...
Click to collapse
could you please update the TWRP Link,

em90256 said:
could you please update the TWRP Link,
Click to expand...
Click to collapse
Added two mirror links .

Ugh, seems the twrp only works on the Chinese version, not the global version. Will leave the link up with a note.

So, currently it only works with the Chinese version? Waiting on a global twrp

Not workint with the most recent cn version (2.27)
Hope someone can update the twrp file

Got "Lock state" message when trying to flash the img file..whats is wrong? I am was do all the steps correctly.. and then all removed from the phone

Hi need help. I cant download the twrp. Link asking for decryption key. - oh found the correct link.

danielad200 said:
Got "Lock state" message when trying to flash the img file..whats is wrong? I am was do all the steps correctly.. and then all removed from the phone
Click to expand...
Click to collapse
before step flash twrp
you need type "fastboot oem nubia_unlock NUBIA_NX629J" then enter
then type flash twrp command

[/COLOR]
txdvil said:
before step flash twrp
you need type "fastboot oem nubia_unlock NUBIA_NX629J" then enter
then type flash twrp command
Click to expand...
Click to collapse
Its will remove all again? In the fastboot menu bootloader show '1'

danielad200 said:
[/COLOR]
Its will remove all again? In the fastboot menu bootloader show '1'
Click to expand...
Click to collapse
do you mean reset the system?
its just allow you to flashing twrp

txdvil said:
before step flash twrp
you need type "fastboot oem nubia_unlock NUBIA_NX629J" then enter
then type flash twrp command
Click to expand...
Click to collapse
txdvil said:
do you mean reset the system?
its just allow you to flashing twrp
Click to expand...
Click to collapse
Yes i mean if it rrmove all the data..thank you..do you have twrp inatalled allready?..i am worry about data loss

danielad200 said:
Yes i mean if it rrmove all the data..thank you..do you have twrp inatalled allready?..i am worry about data loss
Click to expand...
Click to collapse
the twrp not installed, still using stock recovery,
so I tried root via magisk (see other thread here) and its worked now.
I do this for installing gapps but the gapps not working well. so frustating

txdvil said:
the twrp not installed, still using stock recovery,
so I tried root via magisk (see other thread here) and its worked now.
I do this for installing gapps but the gapps not working well. so frustating
Click to expand...
Click to collapse
Can you link it please? Why you not using the twrp

danielad200 said:
Can you link it please? Why you not using the twrp
Click to expand...
Click to collapse
https://forum.xda-developers.com/red-magic-3/how-to/red-magic-3-root-guide-t3933148
I think its failed to install

txdvil said:
https://forum.xda-developers.com/red-magic-3/how-to/red-magic-3-root-guide-t3933148
I think its failed to install
Click to expand...
Click to collapse
Its working on global rom?

danielad200 said:
Its working on global rom?
Click to expand...
Click to collapse
I don't know
mine is chinese version

txdvil said:
I don't know
mine is chinese version
Click to expand...
Click to collapse
Its working fine? Do you have dts?

danielad200 said:
Its working fine? Do you have dts?
Click to expand...
Click to collapse
what is dts?
I tried some features I think mine is fine. regardless so frustating can not install gapps