Use this guide to root for now for global rom: https://forum.xda-developers.com/red-magic-3/how-to/red-magic-3-root-guide-t3933148
Requirements:
- Unlocked Bootloader On Nubia Red Magic 3 (NX629J): https://forum.xda-developers.com/red-magic-3/how-to/guide-unlocking-red-magic-3s-bootloader-t3935630
- TWRP HERE: https://forum.xda-developers.com/red-magic-3/development/recovery-unofficial-twrp-nubia-red-t3962482 (CHINESE ROM ONLY)
- Latest Magisk stable zip transferred to your phone's storage (https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445)
- Charge the Nubia Red Magic to at least 50%.
- You need a USB cable to connect your phone to PC.
ADB Drivers for your PC
STEPS TO INSTALL TWRP (READ EVERYTHING CAREFUL BEFORE ATTEMPTING):
1) Enable the Developer Options
- To Enable Developer Options, Go to your Settings -> About -> Software Information -> More -> Now Tap on the Build Number 10 Times until you see a toast message “Developer options enabled“
2) Go back to settings -> Now you need to enable the OEM Unlock by going to Settings -> Developer Options and check the box for OEM Unlock and USB Debugging
3) Connect your phone to Computer using USB Cable to a USB 2.0 port.
4) Open a command prompt window on your computer and type: "adb devices"
5) You will see a pop up window on your phone to allow USB debugging on your phone. Click ok.
6) Now type the commannd "adb reboot bootloader"
7) Once your phone has rebooted into it's bootloader, type in the pc command prompt "fastboot devices". This will list the devices connected, your phone should show up.
8) Then, to flash twrp, enter "fastboot flash recovery recovery-TWRP-3.3.1-0528-NUBIA_REDMAGIC3-CN-wzsx150.img" in the command prompt.
9) Finally reboot into the twrp recovery from the phone menu after twrp is installed. Rebooting your phone will reflash Nubia's recovery if you dont do so after flashing.
10) Once in twrp, go to install, navigate to where you put the magisk zip, and install it.
12) Reboot your phone.
Always welcome bro. Anytime I available for help. If I know anything
Secretcow said:
Requirements:
- Unlocked Bootloader On Nubia Red Magic 3 (NX629J): https://forum.xda-developers.com/red-magic-3/how-to/guide-unlocking-red-magic-3s-bootloader-t3935630
- TWRP: https://drive.google.com/file/d/10CZ...w?usp=drivesdk - Thank you to sandeepkhatri for sharing!
- Latest Magisk stable zip transferred to your phone's storage (https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445)
- Charge the Nubia Red Magic to at least 50%.
- You need a USB cable to connect your phone to PC.
1) Enable the Developer Options
- To Enable Developer Options, Go to your Settings -> About -> Software Information -> More -> Now Tap on the Build Number 10 Times until you see a toast message “Developer options enabled“
2) Go back to settings -> Now you need to enable the OEM Unlock by going to Settings -> Developer Options and check the box for OEM Unlock and USB Debugging
3) Connect your phone to Computer using USB Cable.
4) Open a command prompt window on your computer and type: "adb devices"
5) You will see a pop up window on your phone to allow USB Debugging on your phone. Click ok.
6) Now type the commannd "adb reboot bootloader"
7) Once your phone has rebooted into it's bootloader, type in the command prompt "fastboot devices". This will list the devices connected, your phone should show up.
8) Then, to flash twrp, enter "fastboot flash recovery recovery-TWRP-3.3.1-0528-NUBIA_REDMAGIC3-CN-wzsx150.img" in the command prompt.
9) Finally type "fastboot reboot" into the command prompt.
10) After your phone restarts, select boot into recovery to boot into twrp.
11) Once there, go to install, navigate to where you put the magisk zip, and install it.
12) Reboot your phone.
Click to expand...
Click to collapse
could you please update the TWRP Link,
em90256 said:
could you please update the TWRP Link,
Click to expand...
Click to collapse
Added two mirror links .
Ugh, seems the twrp only works on the Chinese version, not the global version. Will leave the link up with a note.
So, currently it only works with the Chinese version? Waiting on a global twrp
Not workint with the most recent cn version (2.27)
Hope someone can update the twrp file
Got "Lock state" message when trying to flash the img file..whats is wrong? I am was do all the steps correctly.. and then all removed from the phone
Hi need help. I cant download the twrp. Link asking for decryption key. - oh found the correct link.
danielad200 said:
Got "Lock state" message when trying to flash the img file..whats is wrong? I am was do all the steps correctly.. and then all removed from the phone
Click to expand...
Click to collapse
before step flash twrp
you need type "fastboot oem nubia_unlock NUBIA_NX629J" then enter
then type flash twrp command
[/COLOR]
txdvil said:
before step flash twrp
you need type "fastboot oem nubia_unlock NUBIA_NX629J" then enter
then type flash twrp command
Click to expand...
Click to collapse
Its will remove all again? In the fastboot menu bootloader show '1'
danielad200 said:
[/COLOR]
Its will remove all again? In the fastboot menu bootloader show '1'
Click to expand...
Click to collapse
do you mean reset the system?
its just allow you to flashing twrp
txdvil said:
before step flash twrp
you need type "fastboot oem nubia_unlock NUBIA_NX629J" then enter
then type flash twrp command
Click to expand...
Click to collapse
txdvil said:
do you mean reset the system?
its just allow you to flashing twrp
Click to expand...
Click to collapse
Yes i mean if it rrmove all the data..thank you..do you have twrp inatalled allready?..i am worry about data loss
danielad200 said:
Yes i mean if it rrmove all the data..thank you..do you have twrp inatalled allready?..i am worry about data loss
Click to expand...
Click to collapse
the twrp not installed, still using stock recovery,
so I tried root via magisk (see other thread here) and its worked now.
I do this for installing gapps but the gapps not working well. so frustating
txdvil said:
the twrp not installed, still using stock recovery,
so I tried root via magisk (see other thread here) and its worked now.
I do this for installing gapps but the gapps not working well. so frustating
Click to expand...
Click to collapse
Can you link it please? Why you not using the twrp
danielad200 said:
Can you link it please? Why you not using the twrp
Click to expand...
Click to collapse
https://forum.xda-developers.com/red-magic-3/how-to/red-magic-3-root-guide-t3933148
I think its failed to install
txdvil said:
https://forum.xda-developers.com/red-magic-3/how-to/red-magic-3-root-guide-t3933148
I think its failed to install
Click to expand...
Click to collapse
Its working on global rom?
danielad200 said:
Its working on global rom?
Click to expand...
Click to collapse
I don't know
mine is chinese version
txdvil said:
I don't know
mine is chinese version
Click to expand...
Click to collapse
Its working fine? Do you have dts?
danielad200 said:
Its working fine? Do you have dts?
Click to expand...
Click to collapse
what is dts?
I tried some features I think mine is fine. regardless so frustating can not install gapps
Related
Guys im opening this thread on how to unlock Boot loader and flashing twrp in steps clearly...as there are no clear guide to do this in main threads and people can also share things here...Thanks for the devs who are working for us[emoji3]
Thanks and all credit goes to Dev (Uberlaggydarwin) for developing the magic tool (Magictricks.zip) for unlock and initiating development of this device and all I need from you is just clicking thanks button below that's all [emoji12] [emoji12] [emoji12]
Sent from my F1f using XDA-Developers mobile app
Steps: Making bootloader unlockable
Download Magictricks.zip by (uberlaggydarwin) - go to stock recovery- select install from storage- select the downloaded zip- flash or update it.
This will make the boot loader unlockable and brings fastboot to our device...see below how to unlock bootloader through fastboot completely.
Sent from my F1f using XDA-Developers mobile app
Adb commands for fastboot and flash twrp.
First set up adb shell on your Windows..Download link available below...
Steps to command in adb shell properly to fastboot and to flash custom recovery...let's begin
1-Download adb and install adb drivers for oppo f1.
2-extract the files from adb.rar to your c directory in a folder named adb(creat one) or just extract the folder in c directory.
3-once the files are located in c:\adb go to start menu then search for cmd
4-Type in cd c:\adb then click enter
5-Type in "adb devices" it will show the connected devices it should be bunch of numbers
6-If you can't see them it means adb drivers for your device are not installed then install with adb installer
7- Disconnect your oppo f1 and put your phone in fastboot mode(press and hold vol+ and power button} u will see fastboot screen on phone then connect via usb then let the system install bootloader driver....proceed below
7-Then finally Command in fastboot for our device.
Put twrp recovery image(rename as twrp) in the same folder where adb is present then tick 'oem unlock' on developer option settings in the device before you continue.
Don't proceed here unless you flash "magictricks.zip" through stock recovery.
Starting Boot loader unlock and custom recovery steps:
Connect your device via usb in fastboot mode and command as below..
Type this "fastboot oem unlock" then press enter.(Will wipe your data so backup before you do and wait for reboot) command will show 'ok finished' with some like 0.07secs
Type this "fastboot flash recovery twrp.img" then press enter. wait it will flash then command will show 'ok finished' then disconnect and boot in to new recovery.....enjoy
Note - once u flash the recovery disconnect the phone and switch off from the fastboot then u should boot the twrp recovery first otherwise system will reflash the stock recovery...To boot in to twrp recovery command as "fastboot boot twrp.img" press enter
That's it you have unlocked your boot loader and installed twrp recovery successfully[emoji3] [emoji12] [emoji3] [emoji12]
Credits
Thanks to @uberlaggydarwin for developing magictricks to unlock
Download links:
Magictricks by uberlaggydarwin - https://strangebinaries.re/f1f/magictricks.zip
ADB driver installer(optional) - www14.zippyshare.com/v/ufYG71o0/file.html
ADB Folder files-https://drive.google.com/file/d/0B9SasC5iWK5kT1liMlpKRGY3LVU/view?usp=sharing
Twrp recovery for f1f - http://build.twrp.me/twrp/twrp-3.0.2-0-f1f.img
Rooting guide:
After installing TWRP recovery flash this Super Su Stable version and reboot then install super su from playstore if you dont see any icon
Flashable Su Binaries - http://forum.xda-developers.com/showthread.php?p=23427715
Sent from my F1f using XDA-Developers mobile app
reserve
Thankss a lot
drganbds said:
Adb commands for fastboot and flash twrp.
First set up adb shell on your Windows..Download link available below...
Steps to command adb properly please share it somebody[emoji12] ill share once I know and master it
1-Download adb and install adb drivers for oppo f1.
2-extract the files from adb.rar to your c directory in a folder named adb(creat one) or just extract the folder in c directory.
3-once the files are located in c:\adb go to start menu then search for cmd
4-Type in cd c:\adb then click enter
5-Type in "adb devices" it will show the connected devices it should be bunch of numbers
6-If you can't see them it means adb drivers for your device are not installed then install with adb installer
7-THEN FINALY COMMAND some for our device.
Put twrp recovery image(rename as twrp.img) in the same folder where adb is present then tick 'oem unlock' on developer option settings in the device before you continue.
Don't proceed here unless you flash "magictricks.zip" through stock recovery.
Starting Boot loader unlock and custom recovery steps:
Connect your device via usb and command as below..
Type this "fastboot oem unlock" then press enter.(Will wipe your data so backup before you do and wait for reboot)
stucked at waiting for device ( then i press vol + plus power button) command shows Ok finished but nothing happened to device no changes nothing...help please
Click to expand...
Click to collapse
I think you have not installed your adb drivers properly...use pdanet pc version to install otherwise use adb installer which is available in dl.
Sent from my F1f using XDA-Developers mobile app
Guys if u stuck at "waiting for device"
solution - disconnect the device, put it in fastboot mode (press and hold vol+ and power you will see fastboot screen)and connect it again then it will install bootloader drivers and continue. It will show 'ok finished' then u can continue to flash recovery and other stuffs...enjoy[emoji3] [emoji12] [emoji3] [emoji12]
Sent from my F1f using XDA-Developers mobile app
@ teteakholhring. you have done it right go head flashing recovery step.....now u unlocked the bootloader then flash the recovery
Thread re edited please check if u have doubts.
Hi
sorry about my poor English.
I am sure that I flashed magictricks.zip and ticked "OEM unlock"
and the phone is in fastboot mode.
And I typed in "fastboot oem unlock", it showed "Okay, finished",
then I typed in "fastboot flash recovery twrp.img", it also showed "Okay, finished".
Then nothing happen, my phone is still with stock recovery, and my data is stilled there, can someone give me a help?
I attached my cmd picture.
Thank you!
^^ I've read from other thread that right after you flashed the TWRP recovery image, you must start-up the phone in TWRP recovery first before eventually booting to Android.
I haven't unlock my phone yet though but I will once I see some custom ROMs available.
Sent from my F1f using Tapatalk
x36023x36023 said:
Hi
sorry about my poor English.
I am sure that I flashed magictricks.zip and ticked "OEM unlock"
and the phone is in fastboot mode.
And I typed in "fastboot oem unlock", it showed "Okay, finished",
then I typed in "fastboot flash recovery twrp.img", it also showed "Okay, finished".
Then nothing happen, my phone is still with stock recovery, and my data is stilled there, can someone give me a help?
I attached my cmd picture.
Thank you!
Click to expand...
Click to collapse
All your steps are perfectly right but once u flash the recovery disconnect the phone and switch off from the fastboot then u should boot the twrp recovery first otherwise system will reflash the stock recovery...
Do the recovery flash again and boot to twrp first...
It is not necessary that oem unlock will wipe your data so no worry.
Me too I'm waiting for available alternative roms to install twrp recovery ....I just flashed magictrick and it said that I have update the build.... Thanks sure it will be functional....
x36023x36023 said:
Hi
sorry about my poor English.
I am sure that I flashed magictricks.zip and ticked "OEM unlock"
and the phone is in fastboot mode.
And I typed in "fastboot oem unlock", it showed "Okay, finished",
then I typed in "fastboot flash recovery twrp.img", it also showed "Okay, finished".
Then nothing happen, my phone is still with stock recovery, and my data is stilled there, can someone give me a help?
I attached my cmd picture.
Thank you!
Click to expand...
Click to collapse
Ok you did everything right.. I've attached the picture how i did it.. I was busy solving the same problem.. Remove the usb when it says booting then it will boot into twrp recovery.. Then flash latest supersu..that's it download super user from playstore.. Thre you go.. You got what you wanted..
teteakholhring said:
Ok you did everything right.. I've attached the picture how i did it.. I was busy solving the same problem.. Remove the usb when it says booting then it will boot into twrp recovery.. Then flash latest supersu..that's it download super user from playstore.. Thre you go.. You got what you wanted..
Click to expand...
Click to collapse
Ya right guys...Please check this thread's main page everything was written clearly for how to do it correctly...enjoy
Sent from my F1f using XDA-Developers mobile app
hoping someone will upload a video on how to properly root our device.
wakaranay said:
hoping someone will upload a video on how to properly root our device.
Click to expand...
Click to collapse
What doubt you have? I'm here to clear it all and every steps are clearly explained in the main page...
Sent from my F1f using XDA-Developers mobile app
thank you for all your help
I made my phone rooted
but when I forced to delete original apps like original browser
and reboot
all the things on home page will disappear
when I delete original browser only
it still happened
this never happened on my other Sony device
can anyone tell me why
x36023x36023 said:
thank you for all your help
I made my phone rooted
but when I forced to delete original apps like original browser
and reboot
all the things on home page will disappear
when I delete original browser only
it still happened
this never happened on my other Sony device
can anyone tell me why
Click to expand...
Click to collapse
Use root app delete from playstore or manually remove .apk file along with .odex file...
Sent from my F1f using XDA-Developers mobile app
*Unlocking bootloader will remove all your data!*
I'm using Windows 7, and that's the steps i did. (it should be simmilar for other systems too)
Getting code:
Code will look simmilar to this: DB1ED223C5537BA756FB0671E425D650
Method 1 (no root):
Go to
https://passwordsgenerator.net/md5-hash-generator/ copy paste serial number and click generate. Then you should see code in "MD5 Hash of your string". You can also go to simmilar md5 hash generator sites, but this site automatically converts small letters to big letters.
Method 2 (root):
Okay, this is new method that is much easier and you don't need to send IMEI and wait for @the_laser to give you code. Go to terminal emulator, type su and execute it. Then type this and execute it:
redweaver said:
Actually the command is
echo -n NE1GAM4770133666 |md5sum |tr [:lower:] [:upper:]
If you don't use the -n flag, the newline character is also passed and you get a different result
Click to expand...
Click to collapse
Unlocking bootloader:
Download platform-tools which activates adb and fastboot commands (first you need Nokia 3 driver installed if you didn't)
Nokia 3 driver: http://www.devfiles.co/download/3iK0k7Sv/Nokia_3_USB_Drivers.zip
platform-tools Windows: http://www.devfiles.co/download/KtLsN6fX/platform-tools-latest-windows.zip
platform-tools Mac: http://www.devfiles.co/download/OkrfluP0/platform-tools-latest-darwin.zip
platform-tools Linux: http://www.devfiles.co/download/vk5DudZX/platform-tools-latest-linux.zip
Enable usb debugging in Developer options before running adb. To get Developer options, go to settings, about phone and press build number 7 times. Also enable OEM unlock.
Now Connect phone to computer via usb and enable usb file transfer, run cmd as administrator, then type this command which runs adb:
chdir C:/Users/John/Desktop/platform-tools (this is just a example, you need to type your own location of platform-tools)
then type this command to check is your device connected to adb, it will show serial number of your device, if it hangs at waiting device, then you need to reinstall drivers (if you're doing this first time, then it will ask to allow usb debugging on your computer, just tick always allow from this computer and click OK)
adb devices
then type this command to reboot to recovery (you can boot to recovery by holding power on + volume up (only with usb connected) if this command doesn't works)
adb reboot recovery
when booted to recovery, choose reboot to bootloader option with volume sliders (this will boot to fastboot)
when booted to fastboot, it will show text 'FASTBOOT MODE' in down-left corner
now type this command to check is your device connected properly to fastboot.
fastboot devices
if it show characters like 0123456789ABCDEF or simmilar then it is connected properly, if it hangs on waiting device, then you need to reinstall drivers like mentioned above.
Android Nougat (7.0 & 7.1.1):
Now type these commands to unlock bootloader
fastboot.exe -i 0x2e04 oem key (type your key after oem key)
fastboot.exe -i 0x2e04 oem unlock
then press volume up, when asked
Android Oreo (8.0 & 8.1):
First download NE1-0-215H.lk.bin:
https://my.pcloud.com/publink/show?code=XZaLMs7ZclQ2wvKwSb0ofUraMmrsiHh6uk1X
Now type these commands to unlock bootloader
fastboot oem dm-verity <your_unlock_key>
fastboot flash lk NE1-0-215H.lk.bin
fastboot reboot-bootloader
Proceed your unlock procedure.
If you have problem on flashing the lk partition, you can use MTK Smart Phone Flash Tool to flash lk partition manually.
After lk partition flashed, you may encounter "Red State" when booting the phone. Ignore that and boot your phone to Fastboot mode directly with OST LA.
That is it, i tried to explain for you to understand everything i did to unlock bootloader.
Credits:
@the_laser for codes, some additional steps and corrections. Also thanks for new method. @redweaver for new method.
@Hikari_kalyx for Android Oreo method. @bigrammy for NE1-0-215H.lk.bin link.
way to enter recovery without adb -
power off phone
press and hold volume up + power on buttons, insert cable immediately
countdown will start on phone, hold both keys until countdown ends, then IMMEDIATELY release power on key, still holding volume up
you will enter recovery shortly
after installing TWRP it is very important - DO NOT allow /system modification until supersu package installation ! ( or you will require reflashing phone with OST )
another note - can't enter recovery by combination volume-up + power button, if phone not connected to computer
one man reported, that even he successfully flashed TWRP image with "fastboot flash recovery <twrp image>", he still got original recovery.
workaround is to use "fastboot boot <twrp image>" - as we need to have USB cable connected to enter TWRP recovery anyway, not big problem.
the_laser said:
way to enter recovery without adb -
power off phone
press and hold volume up + power on buttons, insert cable immediately
countdown will start on phone, hold both keys until countdown ends, then IMMEDIATELY release power on key, still holding volume up
you will enter recovery shortly
after installing TWRP it is very important - DO NOT allow /system modification until supersu package installation ! ( or you will require reflashing phone with OST )
another note - can't enter recovery by combination volume-up + power button, if phone not connected to computer
one man reported, that even he successfully flashed TWRP image with "fastboot flash recovery <twrp image>", he still got original recovery.
workaround is to use "fastboot boot <twrp image>" - as we need to have USB cable connected to enter TWRP recovery anyway, not big problem.
Click to expand...
Click to collapse
Someone told me that if you flashed twrp, that it automatically removes data encryption. Is that true?
EDIT: i find out that is not true, it asks for some password to decrypt data, but the problem is that idk what is the password
DON'T install xposed! It bootlops.
EDIT: My fault, it actually work but you need to wait more than usual to boot.
That is great guys.
Do we have a working recovery yet?
nafnist said:
That is great guys.
Do we have a working recovery yet?
Click to expand...
Click to collapse
I use this twrp https://1drv.ms/u/s!AsmTb5aqoY12mDZqDZbPOp47QVMV
I have stock recovery, but I use fastboot command 'fastboot boot recoveryname.img' when I need TWRP, and that's awesome because I don't lose stock recovery which is useful to flash OTAs and Nokia zips. I flashed SuperSu 2.79 just fine, but expect some crashes like software update, device monitor crash, but actually everything works, software update works just fine.
SkaboXD said:
Someone told me that if you flashed twrp, that it automatically removes data encryption. Is that true?
EDIT: i find out that is not true, it asks for some password to decrypt data, but the problem is that idk what is the password
Click to expand...
Click to collapse
TWRP can't handle Android 7.x default disk encryption, just press "cancel" and we need to use sdcard as storage for backups and packages because of this
Can I return the bootstrapper lock?
Where are you getting the codes from @the_laser?
abetterlie said:
Where are you getting the codes from @the_laser?
Click to expand...
Click to collapse
Yes
shokohiw said:
Yes
Click to expand...
Click to collapse
you mean to get bootloader locked again?
yes you can just instead of oem unlock type oem lock
I mean where are you getting the OEM unlock keys from?
SkaboXD said:
you mean to get bootloader locked again?
yes you can just instead of oem unlock type oem lock
Click to expand...
Click to collapse
abetterlie said:
I mean where are you getting the OEM unlock keys from?
Click to expand...
Click to collapse
idk, ask @the_laser
the bootloader I unlocked how to install root and twrp
shokohiw said:
the bootloader I unlocked how to install root and twrp
Click to expand...
Click to collapse
link for twrp
https://1drv.ms/u/s!AsmTb5aqoY12mDZqDZbPOp47QVMV
when downloaded, copy twrp to folder platform-tools and rename it to recovery.img
reboot to fastboot, then type this command:
fastboot flash recovery recovery.img
then reboot, fastboot reboot
if it didn't worked, use this command just to boot to twrp (you need to do this everytime when you are connected to PC)
fastboot boot recovery.img
To install root, first disable system modification on twrp then flash this zip for root.
This is not the latest version of SuperSU, but newest releases have some problems and crashes. (at least for me). This is last version that works for me.
That is it.
Thank you!
Is it possible after unlocking, installing twrp and root, to return the device to factory settings for ota updates? If so, how?
shokohiw said:
Is it possible after unlocking, installing twrp and root, to return the device to factory settings for ota updates? If so, how?
Click to expand...
Click to collapse
on twrp, there is a option wipe, click on it, then you will see option swipe to factory reset. then wait and reboot.
And you can now enable system modification if you want (it is recommended to enable it because some zips fails to flash because this option is disabled)
After installing TWRP and rebooting, does not want to boot Android, weighs in on the initial splash screen what to do
Your device has failed verification and may not work properly
shokohiw said:
After installing TWRP and rebooting, does not want to boot Android, weighs in on the initial splash screen what to do
Your device has failed verification and may not work properly
Click to expand...
Click to collapse
Weird, when it says your device has failed verification?
For me reboot works fine
(Can't put the [RECOVERY][PORT] in title because it exceeds character limit)
Bugs:
- MTP (or just my driver?)
- The rest is just working fine (including adb)
How to boot?
Due to how this device works, we can only flash a stock recovery or else it won't boot with custom recovery at all
Click to expand...
Click to collapse
Download TWRP here: https://androidfilehost.com/?fid=818070582850505557
& (skip if already installed) install adb & fastboot drivers here: https://forum.xda-developers.com/showthread.php?t=2588979
1. Enable OEM unlocking & USB debugging via Settings > Developer Options
2. Open Command Prompt & "cd" where you downloaded the image & type:
Code:
adb reboot bootloader
Allow it when a prompt shows up then try again if it doesn't work
Code:
fastboot oem unlock
SKIP THIS STEP WHEN ALREADY UNLOCKED!
When a warning about unlocking bootloader shows up, press volume up (will factory reset your device after rebooting)
Code:
fastboot boot TWRP-3.1.0-0_v3961.img
There! Enjoy TWRP & READ NOTES!
NOTES:
- If this is the first time you booted TWRP, install SuperSU zip (or use "adb reboot") or else the device won't boot to Android after rebooting using TWRP's reboot option! (modifies /system partition, renames recovery-from-boot.p to recovery-from-boot.bak, causing dm-verity to invalidate system partition)
- If your /data partition is throwing errors, you need to reboot it using "adb reboot", since you've just unlocked the bootloader & needs to be formatted via stock recovery
- Since it's just "fastboot boot", it won't stay on your device (don't even try to "fastboot flash" it)
Help me Please
Pls help. My Cloudfone Excite Prime 2 got bootlopp in orange state after trying to fastboot unlock oem and flashed twrp. is there any fix please. I cant turn off my phone its always restarting on orange state on repeat.
Bootloop (
My wiko u pluse got bootloop too :crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Fixed - Forgot to read note LOL
I fastboot flash it lol :v
Hello,
Does it work on U-pulse lite ?
Thanks
Laurent
link for download twrp not working
pls provide link for download twrp u pulse v3961, that one not working anymore
twrp?
pls provide twrp for u pulse v3961, thanks
Update the twrp link please, i need it for my wiko u pulse
3DMapPlayer said:
(Can't put the [RECOVERY][PORT] in title because it exceeds character limit)
Bugs:
- MTP (or just my driver?)
- The rest is just working fine (including adb)
How to boot?
Download TWRP here: https://androidfilehost.com/?fid=818070582850505557
& (skip if already installed) install adb & fastboot drivers here: https://forum.xda-developers.com/showthread.php?t=2588979
1. Enable OEM unlocking & USB debugging via Settings > Developer Options
2. Open Command Prompt & "cd" where you downloaded the image & type:
Code:
adb reboot bootloader
Allow it when a prompt shows up then try again if it doesn't work
Code:
fastboot oem unlock
SKIP THIS STEP WHEN ALREADY UNLOCKED!
When a warning about unlocking bootloader shows up, press volume up (will factory reset your device after rebooting)
Code:
fastboot boot TWRP-3.1.0-0_v3961.img
There! Enjoy TWRP & READ NOTES!
NOTES:
- If this is the first time you booted TWRP, install SuperSU zip (or use "adb reboot") or else the device won't boot to Android after rebooting using TWRP's reboot option! (modifies /system partition, renames recovery-from-boot.p to recovery-from-boot.bak, causing dm-verity to invalidate system partition)
- If your /data partition is throwing errors, you need to reboot it using "adb reboot", since you've just unlocked the bootloader & needs to be formatted via stock recovery
- Since it's just "fastboot boot", it won't stay on your device (don't even try to "fastboot flash" it)
Click to expand...
Click to collapse
I have old phone here which is Cloudfone next lite. I want to root this phone, but I need twrp first but I don't see twrp for my phone. Is there somebody can help me 🥹
Hi all!
You have just upgraded to Oreo 8.1, you want to use Google Camera but you need locked bootloader and you want to preserve your data?
This IS possible, but you MUST follow all steps otherwise you may lose your data, so do it at your own risk. (you have been warned)
WARNING !!!
After May update unlocking/relocking bootloader will wipe your data. This can be avoided if you hold Vol- when running these scripts.
Let's start:
-Read carefully all steps twice
-Download support tool HERE
-Install ADB drivers (option 0 from support tool)
-Enable USB debug and OEM unlock on Mi a1
-Connect Mi a1 to PC with USB cable
-Select option 1 on support tool. Phone will be rebooted in fastboot mode.
-Confirm pressing Y
BEFORE PRESSING ENTER ON PC YOU MUST PRESS AND HOLD VOL- ON MI A1
-Press ENTER
Bootloader should be unlocked and phone should be in fastboot mode without losing data.
Press any key on PC running support tool and phone will be booted with temporary root access.
-Install Magisk Manager (OPTION 2 support Tool)
-Open command prompt in adb folder on PC and type:
Code:
adb shell
then
Code:
su
Shell should ask Superuser access: from Magisk Manager allow root access.
In the same Command prompt type:
Code:
setprop persist.camera.HAL3.enabled 1
-Reboot phone and test if API2 are enabled (Google Camera port shouldn't crash anymore)
-Uninstall Magisk Manager (optional)
(Optional) If you have an unmodified system you can relock bootloader.
-Select option 3 in support tool
-Confirm
BEFORE PRESSING ENTER ON PC YOU MUST PRESS AND HOLD VOL- ON MI A1
-Press Enter
Bootloader will be relocked without losing data
Hold power button until phone reboots
OTA should work fine.
Camera2 Api should remain active until factory reset.
Credits:
@flex1911
@IjazCI
Have you tried this trick?
yes it worked.. !!! thanks @sipollo
Worked for me , thanks
So trick is pressing vol- when executing "fastboot oem unlock" & that will skip wipe.
Thank ?
.:Addicted:. said:
So trick is pressing vol- when executing "fastboot oem unlock" & that will skip wipe.
Thank ?
Click to expand...
Click to collapse
Yes, but after that if you boot TWRP data will be wiped anyway. (For security purposes)
Anyway in this guide TWRP is not booted, only Magisk-patched boot is used. So no wipes
I used this method to bypass wipe. If i reboot after the unlock/lock command, it does not perform a wipe. And I booted to twrp and executed some adb commands also without wiping.
solis_f said:
I used this method to bypass wipe. If i reboot after the unlock/lock command, it does not perform a wipe. And I booted to twrp and executed some adb commands also without wiping.
Click to expand...
Click to collapse
If I understood correctly wipe is performed only the first time you boot TWRP after changing bootloader status. Then you can boot TWRP without problems, i've done it several times.
I'm stuck on the su command nothing happens on the magisk manager... And in the cmd it shows "su: nothing found"... can anyone help?
haftzes said:
I'm stuck on the su command nothing happens on the magisk manager... And in the cmd it shows "su: nothing found"... can anyone help?
Click to expand...
Click to collapse
If you open Magisk Manager says that Magisk is installed or not?
sipollo said:
If you open Magisk Manager says that Magisk is installed or not?
Click to expand...
Click to collapse
Not installed...
haftzes said:
Not installed...
Click to expand...
Click to collapse
Go where did you extract tool, open prompt and type FILES\adb reboot bootloader, then when in fastboot mode type FILES\fastboot boot bootmagisk.img. Phone should boot with temporary root. Continue following the guide.
sipollo said:
Go where did you extract tool, open prompt and type FILES\adb reboot bootloader, then when in fastboot mode type FILES\fastboot boot bootmagisk.img. Phone should boot with temporary root. Continue following the guide.
Click to expand...
Click to collapse
followed the instractions but phone stuck on android one screen ... what should i do know ?
haftzes said:
followed the instractions but phone stuck on android one screen ... what should i do know ?
Click to expand...
Click to collapse
Press power button and vol- until phone reboots to fastboot and retry with fastboot boot FILES\bootmagisk.img Sometimes Magisk makes this jokes...
sipollo said:
Press power button and vol- until phone reboots to fastboot and retry with fastboot boot FILES\bootmagisk.img Sometimes Magisk makes this jokes...
Click to expand...
Click to collapse
done !!! thanks !! also i can enable EIS now ??
haftzes said:
done !!! thanks !! also i can enable EIS now ??
Click to expand...
Click to collapse
Some users say you have to type setprop persist.camera.eis.enable 1 but for me it is not necessary, you can enable eis in Google camera video options. Reboot and try yourself.
sipollo said:
Some users say you have to type setprop persist.camera.eis.enable 1 but for me it is not necessary, you can enable eis in Google camera video options. Reboot and try yourself.
Click to expand...
Click to collapse
No data will be wiped ???
Amanpreetsingh said:
No data will be wiped ???
Click to expand...
Click to collapse
If you follow carefully all steps your data will be safe.
sipollo said:
If you follow carefully all steps your data will be safe.
Click to expand...
Click to collapse
With this method ota will work or not ??
1. Open Settings-About Phone, repeat click Build Number until Developer options shown.
2. Check USB debugging and OEM unlocking
3. Install adb and USB driver, then connect RM3 to computer
USB Driver: https://developer.android.com/studio/run/win-usb
ADB: https://forum.xda-developers.com/showthread.php?t=2317790
4. open cmd, then type adb reboot bootloader , then phone will reboot to fastboot mode.
5. Use fastboot flashing unlock, use volume key select unlock , confirm with power button , then the phone will do factory reset and reboot. Now the phone is unlocked
6. Install Magisk Manager, you can download it here: https://github.com/topjohnwu/Magisk/releases/latest
7. Download current ROM of RM3 here: http://ui.nubia.cn/rom/detail/62 then unpack it, copy boot.img to your phone.
8. Use Magisk Manager patch the boot.img then copy magisk_patched.img to computer.
9. Power off. Then hold volume down+ power button , boot into fastboot mode.
10. Flash the patched kernel to phone.
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot magisk_patched.img
fastboot reboot
11. The phone is rooted now.
Note:
1. All data will be erased when unlock bootloader
2. After unlock, a warning will shown when phone boot.
changguangyu said:
1. Open Settings-About Phone, repeat click Build Number until Developer options shown.
2. Check USB debugging and OEM unlocking
3. Install adb and USB driver, then connect RM3 to computer
USB Driver: https://developer.android.com/studio/run/win-usb
ADB: https://forum.xda-developers.com/showthread.php?t=2317790
4. open cmd, then type adb reboot bootloader , then phone will reboot to fastboot mode.
5. Use fastboot flashing unlock, use volume key select unlock , confirm with power button , then the phone will do factory reset and reboot. Now the phone is unlocked
6. Install Magisk Manager, you can download it here: https://github.com/topjohnwu/Magisk/releases/latest
7. Download current ROM of RM3 here: http://ui.nubia.cn/rom/detail/62 then unpack it, copy boot.img to your phone.
8. Use Magisk Manager patch the boot.img then copy magisk_patched.img to computer.
9. Power off. Then hold volume down+ power button , boot into fastboot mode.
10. Flash the patched kernel to phone.
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot magisk_patched.img
fastboot reboot
11. The phone is rooted now.
Note:
1. All data will be erased when unlock bootloader
2. After unlock, a warning will shown when phone boot.
Click to expand...
Click to collapse
thank you so much friend
Can you please make a video how to use Google camera in nubia red magic 3
changguangyu said:
1. Open Settings-About Phone, repeat click Build Number until Developer options shown.
2. Check USB debugging and OEM unlocking
3. Install adb and USB driver, then connect RM3 to computer
USB Driver: https://developer.android.com/studio/run/win-usb
ADB: https://forum.xda-developers.com/showthread.php?t=2317790
4. open cmd, then type adb reboot bootloader , then phone will reboot to fastboot mode.
5. Use fastboot flashing unlock, use volume key select unlock , confirm with power button , then the phone will do factory reset and reboot. Now the phone is unlocked
6. Install Magisk Manager, you can download it here: https://github.com/topjohnwu/Magisk/releases/latest
7. Download current ROM of RM3 here: http://ui.nubia.cn/rom/detail/62 then unpack it, copy boot.img to your phone.
8. Use Magisk Manager patch the boot.img then copy magisk_patched.img to computer.
9. Power off. Then hold volume down+ power button , boot into fastboot mode.
10. Flash the patched kernel to phone.
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot magisk_patched.img
fastboot reboot
11. The phone is rooted now.
Note:
1. All data will be erased when unlock bootloader
2. After unlock, a warning will shown when phone boot.
Click to expand...
Click to collapse
Hello I'm interested in rooting the ZTE Axon 10 Pro 4g. Is it possible that the root process could be similar to this? I have not bought it yet, since I want to decide between ZTE Axon 10 Pro and Xiaomi Mi 9. If the ZTE Axon will be rootable im going to get it, if not im going for the Mi 9. I already asked the German customer support and they told me that it is possible, but they would not give any details on how to do it.
Will this root methode works with international model?
WhySoSeriousJoKer said:
Will this root methode works with international model?
Click to expand...
Click to collapse
I don't have international model. But i think it will works.
If you want to use cn rom with gapps then try this mathod.
My phone is corrupted and bootloops. Is there a file that I can use in EDL mode?
changguangyu said:
1. Open Settings-About Phone, repeat click Build Number until Developer options shown.
2. Check USB debugging and OEM unlocking
3. Install adb and USB driver, then connect RM3 to computer
USB Driver: https://developer.android.com/studio/run/win-usb
ADB: https://forum.xda-developers.com/showthread.php?t=2317790
4. open cmd, then type adb reboot bootloader , then phone will reboot to fastboot mode.
5. Use fastboot flashing unlock, use volume key select unlock , confirm with power button , then the phone will do factory reset and reboot. Now the phone is unlocked
6. Install Magisk Manager, you can download it here: https://github.com/topjohnwu/Magisk/releases/latest
7. Download current ROM of RM3 here: http://ui.nubia.cn/rom/detail/62 then unpack it, copy boot.img to your phone.
8. Use Magisk Manager patch the boot.img then copy magisk_patched.img to computer.
9. Power off. Then hold volume down+ power button , boot into fastboot mode.
10. Flash the patched kernel to phone.
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot magisk_patched.img
fastboot reboot
11. The phone is rooted now.
Note:
1. All data will be erased when unlock bootloader
2. After unlock, a warning will shown when phone boot.
Click to expand...
Click to collapse
Sir..how to lock bootloader again if already in global rom asia version
I try in adb,it said locked but in setting developer option still show unlock
andixxx81 said:
Sir..how to lock bootloader again if already in global rom asia version
I try in adb,it said locked but in setting developer option still show unlock
Click to expand...
Click to collapse
First install cn rom. Then you unlock bootloader options
I want to know how can I lock the bootloader again, since i need to return this phone, it come with some issues, and if they see i touch that maybe they said that i break the warranty rules
Simple just install global or Chinese rom again ur then your bootloader lock again
sandeepkhatri said:
Simple just install global or Chinese rom again ur then your bootloader lock again
Click to expand...
Click to collapse
I have the international version, where can i get the international rom?
I also search global rom but not find. Hope anyone send global rom link
Global rom link
https://eu.redmagic.gg/blogs/news/red-magic-3-global-rom-flash-instructions
Amazing!! thank you very much! I have one question, if i root my phone, I can unroot it using the original rom?
All I get is "Your Device is corrupt. It can't be trusted and will not boot."
Can some one share the europe & asia boot image which already patch by magisk. Tks
Sent from my ALP-L29
Has anyone been successful with this yet?
Working flawlessly?
Hello guys is there any way to relock bootloader?