Hi! I have a problem with a brand new phone i bought the Thl T11.After i unbox it i open the back cover, remove the stickers from battery's contacts and insert it back to the phone.Pushing the power button and nothing happen, neither when i put the charger on, no led light indicate that the phone is charging only a small blinking of the screen.
So far i have made this conclusion(test it):
Charger: OK i put it on other phones and its working
USB Cable: Same as above
Trying with another charger and cable: Nothing happen
Connect to pc: It recognize it as preloader MT65xx and trying to load drivers for the device (no further testing here)
Trying To Hold Power button For few seconds still nothing
Trying key combinations to go to recovery mode (power + volume up etc) still nothing.
So anyone knows what is faulty?I'm plan to buy a new battery, is there any possibilities the seller root the phone and mess up the OS?
Is there any program for pc to connect my phone and see if the software is ok?
Thank you!
tzimaniGr said:
Hi! I have a problem with a brand new phone i bought the Thl T11.After i unbox it i open the back cover, remove the stickers from battery's contacts and insert it back to the phone.Pushing the power button and nothing happen, neither when i put the charger on, no led light indicate that the phone is charging only a small blinking of the screen.
So far i have made this conclusion(test it):
Charger: OK i put it on other phones and its working
USB Cable: Same as above
Trying with another charger and cable: Nothing happen
Connect to pc: It recognize it as preloader MT65xx and trying to load drivers for the device (no further testing here)
Trying To Hold Power button For few seconds still nothing
Trying key combinations to go to recovery mode (power + volume up etc) still nothing.
So anyone knows what is faulty?I'm plan to buy a new battery, is there any possibilities the seller root the phone and mess up the OS?
Is there any program for pc to connect my phone and see if the software is ok?
Thank you!
Click to expand...
Click to collapse
Well, I think you should go to the service centre or to the shop where you bought this device. They should give you a new one, as you have still warranty!
Related
Hey guys.
I have an interesting problem. My Fuze battery drained a few days ago. After I plugged it back in and booted the phone, there is no light on the screen, keyboard or the button and no charging like shows up on the center circle.
After plugging it into the wall and powering it up, i can hear the phone booting. Once booted i can call the phone from another phone, the phone ring and I can press the talk button and take the call/press end to end it.
I tried doing a (blinded since there is visual light) hard reset (stylus/power button/volume button down/up combo) but unfortunately I have one of the EnergyROMs where the volume button functionality was not working so i dont think .
I also tried plugging the phone into USB to see if i can flash another rom, but the computer does not even recognize a device has been plugged in (even if tried searching from it using device manager)
Searching the posts have not yielded any information. Should I consider this phone dead?
Ali
Do a search on the MTTY tool, this might be able to connect & hard reset the device. Keep playing with it, you may get lucky or get some better advice soon ! Good luck
Hi, from Paris.
My girlfriend got an Htc one Mini (M4), after a year of service , she had nearly crushed this one. I've decided to give her my M7 and buy an M8 for me. everybody is happy with his new phone, but now she need to recover her data from the phone
she had destroyed her power button, only the wire is still present but no button above. see attached files IMAG0938.jpg
I was wonder if there is a way to switch it on without power button, I don't want to fix it because the phone won't be used anymore.
I've tried adb but it is not listed in adb devices.
Tried to see if there is a way to swith it on like a computer with a screwdriver, didn't find.
Seems that when the phone is plugged to a computer, if you remove the battery and replace it, phone is sense to switch on. But the battery here is unremovable. I manage to find the wire between the battery and the mothercard, see attached files IMAG0939.jpg, the gold one in the right bottom corner. I've tried to plug it on the computer, it shows me that the battery is charging, unplug the wire, it shows that there is a problem with the battery and shuts down. replug it, it shows me battery level another time but doesn't boot.
Did somebody have any solution for me except to pay a 49€ button, just in order to turn on the phone and retrieve the data, 10 minutes???
Can someone please tell me if my Sprint Galaxy S3 is soft-bricked, hard-bricked, needs a new motherboard, or just needs a new screen / digitizer? Here are the symptoms:
The battery is fully charged. I tested it in another Galaxy S3.
It stopped working right after I restored CM11 via TWRP. It died upon reboot.
The phone doesn’t turn on when the power button is held down.
The phone doesn’t vibrate when the power button is held down.
The phone doesn't make any sounds.
The phone cannot get into ODIN Download mode.
ODIN cannot detect the phone.
The phone cannot get into Recovery Mode.
The screen stays black no matter what I do.
When connected to my PC via USB cable it does the following:
• My PC will make a sound when I hold down the power button for a few seconds.
• If I take out the battery while it is connected to my PC, the red light will come on.
I have tried the following:
• Taking out the battery and holding down the power button for one minute.
• Making my own boot card by using my microSD card.
• Making my own boot card by using my USB flash drive.
• I have ordered a debricker device from eBay and I am waiting for it to arrive.
• I haven’t tried JTAG.
Gurren Lagann said:
Can someone please tell me if my Sprint Galaxy S3 is soft-bricked, hard-bricked, needs a new motherboard, or just needs a new screen / digitizer? Here are the symptoms:
The battery is fully charged. I tested it in another Galaxy S3.
It stopped working right after I restored CM11 via TWRP. It died upon reboot.
The phone doesn’t turn on when the power button is held down.
The phone doesn’t vibrate when the power button is held down.
The phone doesn't make any sounds.
The phone cannot get into ODIN Download mode.
ODIN cannot detect the phone.
The phone cannot get into Recovery Mode.
The screen stays black no matter what I do.
When connected to my PC via USB cable it does the following:
• My PC will make a sound when I hold down the power button for a few seconds.
• If I take out the battery while it is connected to my PC, the red light will come on.
I have tried the following:
• Taking out the battery and holding down the power button for one minute.
• Making my own boot card by using my microSD card.
• Making my own boot card by using my USB flash drive.
• I have ordered a debricker device from eBay and I am waiting for it to arrive.
• I haven’t tried JTAG.
Click to expand...
Click to collapse
Fairly sure from what you have told us that it is a proper device brick !
This happened to me before and it is VERY annoying expecially seen as though there is no real way out of it !
The only suggestion i would of had is to boot into the download mode but you have already tried that ! Hopefully the debricking jig will work for you !
W18WAR said:
Fairly sure from what you have told us that it is a proper device brick !
This happened to me before and it is VERY annoying expecially seen as though there is no real way out of it !
The only suggestion i would of had is to boot into the download mode but you have already tried that ! Hopefully the debricking jig will work for you !
Click to expand...
Click to collapse
Sadly, it didn't work.
Hello,
[admin; if this post is more appropriately placed somewhere else in the forum, then please move it]
Before giving up on my cellphone and resort to ordering a new one I'll ask for help here too.
Phone is a Kolina K100+ (chinese phone) running android 4.2. It is rooted but it is still running stock ROM (to my knowledge, I bought it new and have not tinkered with the ROM).
Current situation is that the phone is completely dead.
Dead as in turned off, does not light the LED when inserting the charger cable, does not react to any button presses, or combination of button presses.
I have actually no idea what have caused this situation. Granted, the phone has accidentially been dropped twice the last week but it did not turn itself off at any of the occasions. Yesterday, I noticed that the phone had turned off and I tried to turn it on. After a while I got it to go at least to the boot screen but after having to put it away (was actually standing in a line and it was my turn...) it was dead when I was able to reach for it again and after that the phone has been completely dead.
When connecting the USB cable to the computer the computer detects an unknown USB device but cannot seem to install any drivers.
Button combinations I have tried;
- power on button
- long press (~1minute) on power button
- volume down + power button
- volume up + power button
- volume up + volume down + power button
- home button (touchscreen button that is) + power button
...no luck with either combination, no reaction at all from the phone.
I have also managed to pull off the back cover from the phone and was able to disconnect the battery connector and let it lay completely powerless for a few hours before reconnect the battery to the phone and reassemble the back cover.
Any suggestions on if there are any other measures I can do or if there is something I have overlooked in trying to resurrect it?
same problem here phone just stop work i dont know why .
malamas said:
same problem here phone just stop work i dont know why .
Click to expand...
Click to collapse
Do you still have the phone? I would buy it! I need the LCD but I could not find any...
Oltcit said:
Do you still have the phone? I would buy it! I need the LCD but I could not find any...
Click to expand...
Click to collapse
sorry im late. i have the phone like a new contition . if you like to buy i give you but im live in greece
I was restoring a TWRP restore, and it said completed and whatever, but now the phone won't boot or vibrate at all. I've tried plugging into computer, holding volume buttons, nothing works! The only thing that happens is the led turns red when is plugged into charger and power button is being held, otherwise it blinks red. How do I fix the bad restore?
Sent from my D6616 using Tapatalk
qais9 said:
I was restoring a TWRP restore, and it said completed and whatever, but now the phone won't boot or vibrate at all. I've tried plugging into computer, holding volume buttons, nothing works! The only thing that happens is the led turns red when is plugged into charger and power button is being held, otherwise it blinks red. How do I fix the bad restore?
Sent from my D6616 using Tapatalk
Click to expand...
Click to collapse
Try this...
.
1.Run Companion on you PC
2.Push and hold volume down on phone
3.Connect cable to phone (you will here some kind of sound)
4.Forcing connect phone/tablet on companion
5.Click update or repair phone/tablet
One more thing,just in case install this USB flash drivers (for boot and fastboot) if you can connect to pc companion
gregysk said:
Try this...
.
1.Run Companion on you PC
2.Push and hold volume down on phone
3.Connect cable to phone (you will here some kind of sound)
4.Forcing connect phone/tablet on companion
5.Click update or repair phone/tablet
One more thing,just in case install this USB flash drivers (for boot and fastboot) if you can connect to pc companion
Click to expand...
Click to collapse
just tried that no sound is made when i plugged in
Anyone?
Sent from my D6616 using Tapatalk
Not currently rooted as I see no need (for my usage) on this phone.
Had a similar issue long back with an HTC One X, it first went in to a bootloop one day and then in CWM it showed internal storage as non mountable and finally ended up like yours where it would not turn on. Ended up being a bad NAND I am guessing as they had to replace the motherboard. I think you just had bad luck, just get it replaced.......
However in one last attempt try charging for like a day and try turning it on could even be a bad battery to be honest... though probably you still want to replace it
Option 1:
Plug your phone into your turned on computer with the USB cable and leave it there to charge until the red light comes on (leave for 1-2 hours, more if you feel it necessary), then quickly put it on charge using the wall charger.
Option 2 (not likely to work):
Plug your phone into your wall socket with the USB cable and wall charger and leave it there to charge until the red light comes on (leave for 1-2 hours, more if you feel it necessary), then quickly put it on charge through your turned on computer using the USB cable.
If neither of these work (as dumb as this may sound)turn off your phone and put your phone in the freezer for 15-30 minutes (This is done to discharge the battery, wont break your phone). When you've left it there for your chosen time, try option 1 again. If that doesn't work, turn the phone off again and put it back in the freezer for the same time and try option 2. If they don't work, i'm sorry I don't know how to help you.
Click to expand...
Click to collapse
-Mantenner
http://forum.xda-developers.com/showthread.php?t=2405201
Try the procedure from post #8 from the HTC One X forum above:
Now I have exactly the same problem. Where you able to resolve it?
Edit: There is someone else with the same problem: http://forum.xda-developers.com/z3/help/xperia-z3-dead-wont-charge-blinking-red-t3156982?nocache=1