I was trying to get 2.2 on my captivate. It got hung and after about an hour, I powered down phone (battery out).
I'm now getting [phone... (!).. COMPUTER] picture
Trying to get back to stock ROM 2.1, but I cannot get device in download mode
I had to use adb to get in download mode originally.
Is it possible I got a phone that doesn't go into download mode based on button combinations? If so, what do I do?
Unplug your phone from USB
Pull battery
Close Odin
Open Odin
Put in battery
Hold both volume buttons (NO POWER) and plug in USB
Hopefully this gets you into download mode
Still Fail
I've been trying that, but without open/close of Odin.
Still failed when I added that step.
get to that screen again: hold volume up/down and power at the same time.
When the screen goes black, then release power button but keep holding down volume up/down
Zilch25 said:
Unplug your phone from USB
Pull battery
Close Odin
Open Odin
Put in battery
Hold both volume buttons (NO POWER) and plug in USB
Hopefully this gets you into download mode
Click to expand...
Click to collapse
Yes, and remember to keep the volume buttons pressed in while plugging in the USB... I always hold them in until the droid/caution sign comes up.
alabamaroping said:
I was trying to get 2.2 on my captivate. It got hung and after about an hour, I powered down phone (battery out).
I'm now getting [phone... (!).. COMPUTER] picture
Trying to get back to stock ROM 2.1, but I cannot get device in download mode
I had to use adb to get in download mode originally.
Is it possible I got a phone that doesn't go into download mode based on button combinations? If so, what do I do?
Click to expand...
Click to collapse
Try the methods prescribed. There are several minor variations but you may have a phone that doesn't do three button recovery. In order to tell, we need some history on your phone. What is the RF Cal date? Were you able to three button into download before? Do you know if it was one of the ones that had the three button problem?
autocorrelation,
I tried that with the usb cable plugged in and without it plugged in.
Still no good.
joeybear23,
I've been trying that all afternoon. Probably about 50 times.
ianwood,
How do I get the RF Cal date? I don't see it under the battery where the S/N is located. I tried to do 3 button recovery to put phone into download mode when trying to install 2.2, but it wouldn't work. I had to use "adb reboot download".
I've never tried it before today. The only issue I've had was that it could NEVER connect to AT&T server to check for an update.
can you get it into recovery mode?
no recovery
No. It won't go into recovery mode either.
The only thing it WILL do is respond to all 3 buttons being pressed by the black screen flash after about 8 seconds.
If you keep holding all 3 buttons will it flash again after the initial black screen? Try releasing the power button and keeping holding vol up/down after the second black screen.
If I keep holding all 3 buttons, it just keeps flashing.
Also tried to let it flash twice (and even more) and releasing power right when it goes to black 2nd (or 3rd) time. Also tried releasing power half way through black screen, and right before black screen re-appears and also just as the screen powers back up. None of them work.
I ran into this yesterday and about freaked out. Don't panic - apparently one of the guys had this happen to them a lot. Take a deep breath, have ODIN open, plug your USB cable in, hold the volume buttons down at the same time, press and hold the power button till you see the phone to computer, and let go. You should get to the download screen again. Good luck; sucks when something like that happens and you don't know what's going on.
I know this wont help much, but I have one of the no 3 button phones, and after 20 minutes of trying all these methods, it did go into d-load mode. Unfortunately, I don't know exactly which combo I used since my brain went into overload when I finally saw the triangle appear. There is hope though, and please PLEASE post which one works for you(I'm afraid to mess with mine until I find a foolproof method)
I had a phone that wouldnt respond to ANY 3 button combo I tried. I bricked it (sorta on purpose) to the phone-!-computer screen and went and replaced the phone at AT&T (under the 30 day deal).
It didnt initially work with the 3-button but after the JH7 OTA DL mode and recovery mode work perfectly now. Also, GPS has been completely spot on when testing on my motorcycle with the phone in my backpack running my tracks.
If you are under the 30-day return policy, bring it in and come up with a good reason as to why they should give you a new phone. If not, then you're sorta SOL....
Zilch25 said:
Unplug your phone from USB
Pull battery
Close Odin
Open Odin
Put in battery
Hold both volume buttons (NO POWER) and plug in USB
Hopefully this gets you into download mode
Click to expand...
Click to collapse
This method just saved my butt!!!
I have never had trouble getting into recovery or download mode until today when I did a dumb thing. The phone would lock at the ATT screen when trying to power on and if the phone was off and I plugged it in to charge it would freeze and the circle logo that comes up before the green charging battery does.
Every method of getting into download or recovery failed up till now.
Thanks Zilch!!!
Hey guys gonna move this to Q&A.
I had this problem a few days ago after updating to 2.2. I tried every single button/usb/battery combo and nothing worked. FORTUNATELY I was within 30 days of purchasing it (I guess there's a silver lining when diving right into "hacking"), and I brought it to the store with the box and receipt and just told them it gave me an error when turning it on (played dumb) and they swapped it out without even testing. If you're over the 30 days then I think you're pretty much SOL... gotta pay for a replacement.
bricked
I declared it to be bricked and took it back to the store. I have only had it 2 weeks, so I basically pulled the same move of playing dumb and they gave me another one without any problem.
I'm wanting to try to see if I can put it in recovery mode and/or download mode with the buttons without even attaching it to anything, but now I'm paranoid about bricking it.
itsjustaphone said:
I know this wont help much, but I have one of the no 3 button phones, and after 20 minutes of trying all these methods, it did go into d-load mode. Unfortunately, I don't know exactly which combo I used since my brain went into overload when I finally saw the triangle appear. There is hope though, and please PLEASE post which one works for you(I'm afraid to mess with mine until I find a foolproof method)
Click to expand...
Click to collapse
Buddy, we need you to remember I'm in the exact position, no combo works and I bricked it after trying to load 2.2
Going into recovery or download will not brick it, its only everything after that point that might get you bricked.
Well, I believe I bricked my phone.
When I was following the instructions to flash my phone, LGDP2 was running, and then it hit the end of installation, and threw an ErrNum4008 - RAM PROGRAM. So I didn't know what to do, so I unplugged it. Mistake I'm sure.
So now my phone does nothing. Just a black screen, and when plugged in, the keys light up, and the LED display is lit, but nothing on the screen.
I'm unable to get it into Download Mode either (Volume Down + Camera + Power)
Any chance anyone has a fix of some kind.
Thanks!
SOLVED: I ended up just pulling the battery out, plugging it into the computer and trying to put it into download mode that way, and it worked.
Hello,
[admin; if this post is more appropriately placed somewhere else in the forum, then please move it]
Before giving up on my cellphone and resort to ordering a new one I'll ask for help here too.
Phone is a Kolina K100+ (chinese phone) running android 4.2. It is rooted but it is still running stock ROM (to my knowledge, I bought it new and have not tinkered with the ROM).
Current situation is that the phone is completely dead.
Dead as in turned off, does not light the LED when inserting the charger cable, does not react to any button presses, or combination of button presses.
I have actually no idea what have caused this situation. Granted, the phone has accidentially been dropped twice the last week but it did not turn itself off at any of the occasions. Yesterday, I noticed that the phone had turned off and I tried to turn it on. After a while I got it to go at least to the boot screen but after having to put it away (was actually standing in a line and it was my turn...) it was dead when I was able to reach for it again and after that the phone has been completely dead.
When connecting the USB cable to the computer the computer detects an unknown USB device but cannot seem to install any drivers.
Button combinations I have tried;
- power on button
- long press (~1minute) on power button
- volume down + power button
- volume up + power button
- volume up + volume down + power button
- home button (touchscreen button that is) + power button
...no luck with either combination, no reaction at all from the phone.
I have also managed to pull off the back cover from the phone and was able to disconnect the battery connector and let it lay completely powerless for a few hours before reconnect the battery to the phone and reassemble the back cover.
Any suggestions on if there are any other measures I can do or if there is something I have overlooked in trying to resurrect it?
same problem here phone just stop work i dont know why .
malamas said:
same problem here phone just stop work i dont know why .
Click to expand...
Click to collapse
Do you still have the phone? I would buy it! I need the LCD but I could not find any...
Oltcit said:
Do you still have the phone? I would buy it! I need the LCD but I could not find any...
Click to expand...
Click to collapse
sorry im late. i have the phone like a new contition . if you like to buy i give you but im live in greece
Hello everyone
Please help me
I have a Sony Xperia Z3 Dual D6633 with Android 4.4.4
Firmware is D6633_23.0.F.1.74_CE
I tried to install TWRP on my phone using this tutorial
https://forum.xda-developers.com/z3/development/root-stock-kernel-twrp-v01-test-28-09-t2889794?__utma=248941774.950623471.1412017766.1412017766.1412017766.1&__utmb=248941774.1.10.1412017766&__utmc=248941774&__utmx=-&__utmz=248941774.1412017766.1.1.utmcsr=l.facebook.com%7Cutmccn=(referral)%7Cutmcmd=referral%7Cutmcct=/lsr.php&__utmv=-&__utmk=228295838
Since the links in the thread are down it was hard for me to get the bootZ3dualmonxtest01.img file
But after an hour of googleing finally I got it from another Android forum https://mdforum.ru/showthread.php?t=16534
Then, as mentioned in the tutorial I went into bootloader / fastboot mode and entered following command
fastboot flash boot bootZ3dualmonxtest01.img
But it didn't work. Now my phone is bricked. It's powered off and I can't turn it on again
It doesn't respond to anything
Pressing Powerbutton - Nothing
Pressing Power + Volume Up/Down - Nothing
Hold Volume down and connect to PC - Nothing
Connect to 230V Adapter for charging - Nothing
ADB doesn't recognize the phone
Flashtool responds "Device disconnected"
So I can't flash back stock ROM
Please help me out. What went wrong? How can I fix it? Is it repairable or is my phone hard bricked?
Thank you for your answers
Edit:
After several hours of googleing and trying I found a solution that worked for me
Great thanks to StuartjG who posted the steps in this thread
https://forum.xda-developers.com/z3/help/z3-matter-t2945910/post61412021#post61412021
If someone else hase a similar problem this is what worked for me:
StuartjG said:
My Z3 would not power up and no charge LED when cable plugged in. Finally found this solution on Sonymobile support website which fixed my phone!
To force the device to restart
Detach the SIM card slot cover.
Using the tip of a pen or similar object, press and hold down the small OFF button (generally indicated by the text "OFF") until the device has emitted three vibrations, and then release the OFF button. The device turns off automatically.
Charge the device until a charging icon appears on the screen.
Turn on your Xperia™ device.
If a forced restart procedure as described above doesn't succeed in turning on your device, you should try another kind of forced restart - the 2-minute restart procedure.
To force a 2-minute restart
Detach the SIM card slot cover.
Using the tip of a pen or similar object, press and hold down the small OFF button (generally indicated by the text "OFF") for 120 seconds (ignoring any vibrations), and then release the OFF button.
Charge the device until a charging icon appears on the screen.
Turn on your Xperia™ device.
I had to hold the 'off' button for about 60 seconds before the phone vibrated and sprung into life - phew!
Click to expand...
Click to collapse
In my case there were no vibrations. I just held the button down for 120sec and it worked. Then I was able to flash back stock ROM
Hi! I'd like some help.
I have a Samsung Galaxy S10e (SM-G970F).
The power button is faulty, I got it back from service yesterday, unfortunately it was not repaired because the device is rooted.
Before I handed it in for service, I was able to turn it on without the power button (download mode -> restart), but now the download mode is not available either.
And it doesn't indicate charging either, the display is completely black at all times.
Yesterday the computer recognized it as a drive, but it showed only one TWRP folder. Today, unfortunately, the computer does not even recognize it, nothing happens when the usb cable is connected.
Is it possible that the device has remained in some service mode?
Somehow I would have to reboot or get into download mode, I just don’t know how..
So now:
The display is completely dark.
It does not respond to buttons.
The power button is broken.
It does not indicate charging.
The download mode does not start.
The computer does not indicate a usb connection.
The adb doesn't see either: error '(null)' not found.
What can I do?
Probably is bricked by the shop you leave to repair, get back to them
meetlicious said:
Probably is bricked by the shop you leave to repair, get back to them
Click to expand...
Click to collapse
Thanks for the suggestion.
I can't go back to the service now, I made a complaint in writing before yesterday about this, the investigation time is 30 days.
However, I have new news about the device.
I realized that the device itself works, only the display is always dark.
I disassembled, unplugged the battery from the motherboard, and switched back to download mode and Odin recognized it.
I managed to update the software on it, the device restarted fine, only the display is completely dark.
The computer already recognizes it, I can give a command via adb, and I can hear the volume button when pressed.
The only problem is that there is no picture on the display.
I reconnected the display connector to the motherboard, but that wasn't the problem.
When the power is off, the display does not indicate that the charger is connected.
Does anyone have any idea what else I can do?
Try this command (It toggles the display on and off ):
adb shell input keyevent KEYCODE_POWER