[Completed] nexus 4 issue - XDA Assist

Hello sir,
1) my device dosen't give assess to memory no data transfer.no IMEI,no bluetooth ,no WIFI, no signals.
how I came to this 1) I am on stock.
2) rooted with stock 4.4.4
3) TWRP recovery in that i have hit center button in between home and back which leads to "updating partition...." it dosent stop so switch off device and switch on.
4) them flash velocity gapp from TWRP and stuck at updating app and after reboot stuck at circle.
5) under the guidance of of "jd1639" device turn on only with 4.2.1 or before with above issues .
right now device config is 4.2.2 / rooted / bootloader unlock / CWM recovery .

Kindly post your issue in Nexus 4 Q&A, Help & Troubleshooting someone with expertise on that device will be happy to help you.

perseus71 said:
kindly post your issue in nexus 4 q&a, help & troubleshooting someone with expertise on that device will be happy to help you.
Click to expand...
Click to collapse
thanks for reply
issue is solved by how to unbricks your n4 by gigadroid

Related

[Completed] [Q] Blu dash 3.5 (android 4.2.2) - Cant access recovery, Boot loop. Need help!!!!!!!

Hey guys i need help i have bricked my phone. I tried installing CWM recovery and it ends up that i cant boot into recovery. then i was goofing around with an app that has the option "delete china" :silly:, i don't remember the app's name, i thought that option was to delete the unnecessary apps but when i tried to reboot i saw a white screen after the Blu logo appeared. :crying:can you help me to fix my phone? i need serious help. Please help me out!!!!!!!!!!!!!!
Contact: [email protected] / [email protected]
Hi,
A factory reset from CWM could help, if you can get into it. Otherwise you probably need the stock firmware for your device and instructions on how to flash it. You could contact the manufacturer....and you could ask for help here also,
>Android Development and Hacking >Android Q&A, Help & Troubleshooting
Good luck!

[Completed] [Q] [HELP] Galaxy S Advance CM11 doesn't turn on

I was using CM11 on my Galaxy S Advance for a few months, today I restarted my phone and it was showing the CM11 Boot Animation normally, then it showed up the lockscreen and then turned off instantly showing the CM11 Boot Animation again. I did a factory reset with my CWM, everything got fine, then I restarted my phone again and it was in that kind of bootloop again. Can someone help me? (I can't reinstall CM11 because when I plug my USB cable in my phone, Windows doesn't detect it, and I can't put CM11 ZIPs in my phone)
Hi,
You don't have a nandroid backup from CWM you can restore? Having a good backup kept on the phone is always essential in this hobby. No cm rom zip either that you can install from on the phone? Without either, you may need to Odin flash stock to your device. But for other advice, or help with any of my suggestions, you can ask here...
> Samsung Galaxy S Advance I9070 > Galaxy S Advance I9070 Q&A, Help & Troubleshooting > [Q & A] Ask ask your questions here !!
Good luck!
Thank you. Thread closed.

[Completed] [Q] Stuck in bootloop on my Leagoo Lead 1

Hi , so i buy leagoo lead 1 from Etotalk they send me phone and everything was ok , but after 2 weeks i got OTA update which i download and click on apply , phone restart and start again instaling new update (i was like ok everything is good )but at middle of this update it give me Error Android icon with red color ,
and after that i can just start phone again and see just boot menu with :
Normal Boot
Update via ADC
Update from sdcart
update from cashe
wipe cashe
wipe data (factory reset)
....(this one last i dont rememeber)
I tried wipe all and restart again but that did not help me much ..
ok so i download SP-flashtool from Leagoo web site instal all driver for usb and download Original rom from theyr site too .
what i did is i start program like admin. then i click on Option->be sure that Usb mode is enable then again Option -> DA Download All-> and enable Hight speed , after that i click on Scatter -loading and from the folder with Rom i sellect "MT6582_Android_scatter.txt"click on Firmware ->Upgrade and plug my phone which is turn off . in program i can see that he fount it but after 2 hour it is still at 0% how u can see on image i attach to this with some txt record from program with errors
So could anybody tell me what should i do now ?
Hi,
I can't find anything relevant on XDA for your device. You will need to ask for help here,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!
Darth said:
Hi,
I can't find anything relevant on XDA for your device. You will need to ask for help here,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!
Click to expand...
Click to collapse
ok thx

[Completed] Brick LG G2 and can enter in recovery mode

I update the version of cyanogen by direct cell .. until then that's fine did wipes , installed the new version , wipes again .. so the phone hang up and not called again .. when you turn on it appears LG screen for 1 second and off again .. I turned on the player to the PC and not have any folder and also not can enter the device's recovery ... any solution for this?
XDA Visitor said:
I update the version of cyanogen by direct cell .. until then that's fine did wipes , installed the new version , wipes again .. so the phone hang up and not called again .. when you turn on it appears LG screen for 1 second and off again .. I turned on the player to the PC and not have any folder and also not can enter the device's recovery ... any solution for this?
Click to expand...
Click to collapse
Hello, and welcome to XDA!
Can you get to Download Mode? That is (should be) hold down Volume-Down while inserting the MicroUSB cable (while the other end is already plugged into the PC)?
If this is not already you, it's worth to check out:
> LG G2 > G2 Q&A, Help & Troubleshooting > Can't boot into recovery mode
If you have any questions, can post in that thread (once you have an XDA account, if you don't have one already).
Hope this helps, and good luck!
OfficerJimLahey said:
Hello, and welcome to XDA!
Can you get to Download Mode? That is (should be) hold down Volume-Down while inserting the MicroUSB cable (while the other end is already plugged into the PC)?
If this is not already you, it's worth to check out:
> LG G2 > G2 Q&A, Help & Troubleshooting > Can't boot into recovery mode
If you have any questions, can post in that thread (once you have an XDA account, if you don't have one already).
Hope this helps, and good luck!
Click to expand...
Click to collapse
Also check out this thread here. Like the Officer said if you can get into download mode you can flash back to stock. Make sure to follow the instructions on this thread completely. I have retired my G2 but this got me out of a pickle. Goodluck

[Completed] LG nexus 5 d821 hang on logo and flashing problem

hello,
I m using LG nexus 5 d821. Which hangs on logo and never boot. I tried to factory restore in hard reset recovery but still problem persist. Then i tried to flash through stock Rom. Unlocked bootloader but, every time i unlock it after reboot phone automatically locks. Please i need help in this regard. i cant flash the phone without (error in cmd : Failed: remote flash write failure).
Thank you
santu
Hi,
Thanks for using XDA Assist.
Please post your question in your device forum help section: Nexus 5 Q&A, Help & Troubleshooting
I bet on a hardware issue though...
Good luck!

Categories

Resources