Database Info

[FIX] Flashing Stock Rom/Custom ROM over Angeeks ROM

I'm facing a weird problem. I can't flash stock rom via Odin. The phone is always stuck on the Samsung screen. Tried xxlq7/xxlq9. I'm on angeeks rom. Wanted to try the blueberry sensation rom.
So for that I tried flashing xxlq9 again as recommended and faced this issue.
EDIT [FIX]
As suggested by Kartik pat i was able to successfully flash stock rom over angeeks rom
I followed the following steps:
1. Take tb for all apps [angeeks rom]
2. Restore any gingerbread backup you might have from CWM. Boot your device.
3. Flash xxlq9 via Odinv3. Boot device
4. Flash cwm4. Boot device.
5. Flash ardatdat kernel v4.0 [ensures the erase bug issue is resolved]
6. Boot System
7. Reboot into recovery. Wipe data,cache,dalvik cache.
8. Boot system and tada
If you want to flash bb rom over this then:
1. Flash the bb rom v1. Reboot.
2. Flash the bug fix zip. Reboot.
3. Flash sensation mod
P.s. this method worked for me using the gb backup and cwmv4.
Hope this helps.
EDIT 2:
As posted by vikesh....
Hey Buddies,
I did few R&D over Angeek ROM. As we are facing problem after Flashing NORDIC ROM over this One.
Here is the procedure:
If you Have any Back of ICS / GB then only apply these changes. Coz I have already did this.
Caution: Please take your Backup before then Try to Do below mentioned steps.
1) Requirements:
1.1) Must b having Ardatdat's eMMC erased Kernel i.e. V4.0 & higher.
1.2) ODIN V 3.07
1.3) Latest Kies Installed (for USB drivers)
1.4) Latest XXQL9 NORDIC ROM
1.5) CMW 6.0.1.1 for CMW flashing & CMW 6.0.1.1.tar for ODIN.
1.6) A PC..(of course):silly:
2) Flashing:
As per Suggestion by chandanbs, NORDIC ROM is almost come with Full in System Rom Partition.
So, here is few suggestion which was already suggested by our Great Mj.vikram buddy over this Thread & see Post no #8 there.
Hope, your ROM Partition is 619/620MB.
After Flashing above procedure, If you have flashed Ardatdat's Kernel first & have installed any ROM Specially ANGEEK ROM(coz having problem in that rom particularly as per users) Then Follow the Process:
2.1) Go to CMW Recovery MOD & Install Latest CMW 6.0.1.1
2.2) Wipe Data/Factory Reset.
2.3) Go to CMW recovery again & Just Restore you previous backup of any ROM.
2.4) Open ODIN 3.07(Right Click over Exe & select "Run As Administrator") & Follow the steps for flashing Stock ROM using this tutorial
2.5) After Booting just Flash CMW V6 using ODIN 3.07.
2.6) Don't Wipe Data / Factory Reset or Wipe cache / dalvik Cache. Just let it boot.
Now you have Successfully Flashed Nordic ROM over Angeek / Any other ROM.
Sent from my GT-I9103 using xda app-developers app

Try to restore ur cwm backup of gb if u have and den flash ics
I did the same thing i was also using angeek's rom and now i m using BB

Can I restore my cwm backup over xxlq9?
Sent from my GT-I9103 using xda app-developers app

pulley06 said:
Can I restore my cwm backup over xxlq9?
Click to expand...
Click to collapse
yes you can and which ODIN version you are using for flashing better to flash using v3......

mj.vikram said:
yes you can and which ODIN version you are using for flashing better to flash using v3......
Click to expand...
Click to collapse
Mj i had similar issue...i want to taste mazel n was flashin ics stock rom..using odin 3.x but it stuck in mid way durin flashin...
Wat cld b d reason ?? Later i restored my cwm backup..
Sent from my GT-I9103 using Tapatalk 2

mj.vikram said:
yes you can and which ODIN version you are using for flashing better to flash using v3......
Click to expand...
Click to collapse
Yeah I was using v3
Okay so I wanted to use the bb rom...are these steps enough?
1. Take tb for all apps
2. Restore backup
3. Flash xxlq9 via Odin
4. Flash cwm
5. Flash ardatdat kernel
6. Wipe data
7. Wipe cache
8. Flash bb v1,fixes, sensation mod.
Sent from my GT-I9103 using xda app-developers app

vipul12389mehta said:
Mj i had similar issue...i want to taste mazel n was flashin ics stock rom..using odin 3.x but it stuck in mid way durin flashin...
Wat cld b d reason ?? Later i restored my cwm backup..
Click to expand...
Click to collapse
i am also not sure buddy i also faced this kind of issue once then i restored to GB and flashed it again, but i flashed Mazel on Leaked ICS so i thought it was the problem ......
pulley06 said:
Yeah I was using v3
Okay so I wanted to use the bb rom...are these steps enough?
1. Take tb for all apps
2. Restore backup
3. Flash xxlq9 via Odin
4. Flash cwm
5. Flash ardatdat kernel
6. Wipe data
7. Wipe cache
8. Flash bb v1,fixes, sensation mod.
Click to expand...
Click to collapse
yes buddy you are correct, you need to wipe all 3 ie data, cache & Dalvic cache..
But i feel its not mandatory to flash XXLQ9 because i use to flash on my Leaked ICS and it was working fine when i used it.....

i followed all the steps mentioned above...the phone booted to the home screen of xxlq9...flashed bb rom successfully as per cwm...but the phone is stuck on the samsung screen that comes after galaxy r appears

vipul12389mehta said:
Mj i had similar issue...i want to taste mazel n was flashin ics stock rom..using odin 3.x but it stuck in mid way durin flashin...
Wat cld b d reason ?? Later i restored my cwm backup..
Sent from my GT-I9103 using Tapatalk 2
Click to expand...
Click to collapse
It gets stuck for like 10-15 secs but later it flashes ROM properly,
@mj whats wrong to do it with V1.85?
@pulley I also faced same problem yesterday, but I think that time i did not mount/unmout system so I reflashed BB again by pressing two times mount>unmount (final would be unmount/system), so just press two times, still not booting then again wipe all 3 (cache,dalvik and data)

I think there is few points we should consider while flashing BB or MAZEL2 rom if u are on ANGEEK ROM.
If anybody who sucessfully flashed Stock rom & then BB or Mazel 2 after Angeek, must come in front and give us the solution.
@pulley: buddy, as u r the OP, pls add the procesure in ur OP(after getting the solution) and give ur thread name as "Flashing stock rom after Angeek rom". Coz lots of people are flashing over angeek and facing lots of problem.
Asap answer will b appriciated.
Sent from my GT-I9103 using xda premium

kataria.vikesh said:
@pulley: buddy, as u r the OP, pls add the procesure in ur OP(after getting the solution) and give ur thread name as "Flashing stock rom after Angeek rom". Coz lots of people are flashing over angeek and facing lots of problem.
Asap answer will b appriciated.
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
Done :good:

pulley06 said:
Done :good:
Click to expand...
Click to collapse
Great buddy. I will add this in Angeek ROM'S OP.
Sent from my GT-I9103 using xda premium

I don't have a gb backup den what should I do???
Sent from my GT-I9103 using xda premium

Optional Method
on request of pulley06 posting this
I was facing same problem from yesterday, so i followed this
1. remove battery/SDcard/SIM
2. wait for 5 minutes
3. insert SIM and SD card and plug USB cable in phone and connect it with laptop/PC (DO NOT INSERT BATTERY)
4. wait for one minute and now insert battery (With USB cable connected)
5. switch on
6. flash stock ICS and reboot
5 flash CWM (I used 5.5 for BB ROM) and reboot
7 enter CWM
8 Mount/Unmount> click on Unmount/system again click same (so click two times)
9 now flash BB ROM and Reboot
10. Enter CWM and repeat step 8 and flash Sensation Theme. and reboot.

vishu1991 said:
I don't have a gb backup den what should I do???
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
I hope the above post helps you :thumbup:
Sent from my GT-I9103 using xda app-developers app

vishu1991 said:
I don't have a gb backup den what should I do???
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
try flashing Stock GB through Odin.

i created back up of both nordic and austian rom (also gb)
with ardadat kernel
just restore
wipe data/ cache
and flash roms
i have no issue,

Nordic rom flashing over angeek mod rom
Hey Buddies,
I did few R&D over Angeek ROM. As we are facing problem after Flashing NORDIC ROM over this One.
Here is the procedure:
If you Have any Back of ICS / GB then only apply these changes. Coz I have already did this.
Caution: Please take your Backup before then Try to Do below mentioned steps.
1) Requirements:
1.1) Must b having Ardatdat's eMMC erased Kernel i.e. V4.0 & higher.
1.2) ODIN V 3.07
1.3) Latest Kies Installed (for USB drivers)
1.4) Latest XXQL9 NORDIC ROM
1.5) CMW 6.0.1.1 for CMW flashing & CMW 6.0.1.1.tar for ODIN.
1.6) A PC..(of course):silly:
2) Flashing:
As per Suggestion by chandanbs, NORDIC ROM is almost come with Full in System Rom Partition.
So, here is few suggestion which was already suggested by our Great Mj.vikram buddy over this Thread & see Post no #8 there.
Hope, your ROM Partition is 619/620MB.
After Flashing above procedure, If you have flashed Ardatdat's Kernel first & have installed any ROM Specially ANGEEK ROM(coz having problem in that rom particularly as per users) Then Follow the Process:
2.1) Go to CMW Recovery MOD & Install Latest CMW 6.0.1.1
2.2) Wipe Data/Factory Reset.
2.3) Go to CMW recovery again & Just Restore you previous backup of any ROM.
2.4) Open ODIN 3.07(Right Click over Exe & select "Run As Administrator") & Follow the steps for flashing Stock ROM using this tutorial
2.5) After Booting just Flash CMW V6 using ODIN 3.07.
2.6) Don't Wipe Data / Factory Reset or Wipe cache / dalvik Cache. Just let it boot.
Now you have Successfully Flashed Nordic ROM over Angeek / Any other ROM.
Requesting OP to add this one also in his OP Post.

Vikesh.. looks good.. please add few steps as to how to make this nordic room rooted.. as you cant directly flash ardatdat kernel over it as it already full in system rom partition.. :silly:

This means if I don't have an earlier backup of ics/gb and i am on angeeks rom I can't flash any new rom...plz clarify....
Sent from my GT-I9103 using xda premium

[Q] Root after jeally bean

Sir i have rooted my phone(4.0.4) and installed clockworkmod ... now i have to install jelly bean based can samsung s4 rom??? how can i install that rom? should i update to jelly bean (which edition) and install or directly please help me .. i am confused with it

your phone is rooted so u r free..
you can install any rom in your phone there was no query for it....
Sent from my Micromax A110 using xda premium

It does not matter on which ROM you are ....
Once you are rooted and have flashed custom recoveries like CWM or TWRP...you can install any ROM (definitely made for ur mobile ) on ur mobile....
Follow the following steps
1.place the ROM zip file in ur SD card..
2.reboot into recovery mode (cwm or twrp)..
3.wipe data
4.wipe cache
5.wipe system (this erases ur current ROM)
6.do factory reset
7.install the zip
8.fix permissions in recovery after installing the new ROM...
Hit thanks if helped
Sent from my Micromax A110 using xda app-developers app

Noo
krishnan111 said:
Sir i have rooted my phone(4.0.4) and installed clockworkmod ... now i have to install jelly bean based can samsung s4 rom??? how can i install that rom? should i update to jelly bean (which edition) and install or directly please help me .. i am confused with it
Click to expand...
Click to collapse
you should install only android made for micromax A110 only, samsung will not work.
I think you should first install stock android and than any other, to avoid errors..

No matter you are on any ROM untill your new ROM has boot.img in its flashable package and just see that before installing you format system partition from mounts and storage menu of CWM.
If your ROM doesn't have boot.img in it you should flash jb ROM first and proceed to flash new custom ROM Also you can add relavent boot.img to flasable package and proceed to flash on any ROM....
Sent from my Micromax A110 using xda app-developers app

Galaxy fit white android text only not booting

Hi Guys
Im newer to this
I rooted my galaxy fit and then with the help of ROM manager I accessed CWM , then I tried to install custom ROM ,,, after rebooting phone stuck with white text android
Please simebody help me solve this
Sent from my GT-P3100 using xda app-developers app

Wipe data/reset
Wipe dalvik cache
Wipe cache
goto mounts & storage and format system
Flash the rom again
Wipe data
Reboot

Harpratap said:
Wipe data/reset
Wipe dalvik cache
Wipe cache
goto mounts & storage and format system
Flash the rom again
Wipe data
Reboot
Click to expand...
Click to collapse
I did like u said
But no luck
Its still showing white android text in boot screen
Im able to go to download mod and recovery mod but I dont know whats happening ....
Sent from my GT-P3100 using xda app-developers app

glsnjoseph said:
I did like u said
But no luck
Its still showing white android text in boot screen
Im able to go to download mod and recovery mod but I dont know whats happening ....
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
Have patience,wait for 10-15 minutes.
First of all, you shouldn't have used Rom manager. It bricks our device
Read the guide in the top of general section and install a proper recovery from odin.
Maybe the zip you have downloaded is corrupted. So download it again and try.
Make sure you are on official gingerbread(2.3.x) and not froyo(2.2)
If none of this works,there is something seriously wrong with your device.
But don't worry,you can flash stock via odin and revert back to factory state.

Harpratap said:
Have patience,wait for 10-15 minutes.
First of all, you shouldn't have used Rom manager. It bricks our device
Read the guide in the top of general section and install a proper recovery from odin.
Maybe the zip you have downloaded is corrupted. So download it again and try.
Make sure you are on official gingerbread(2.3.x) and not froyo(2.2)
If none of this works,there is something seriously wrong with your device.
But don't worry,you can flash stock via odin and revert back to factory state.
Click to expand...
Click to collapse
First of all let me thankyou for support
I have tried 2-3ROMs but none of them works for me...
I searched a lot to find how to flash ROM via odin but unfortunately I didnt find anyn useful thread.
Can u send a link of odin flashing method ,
Sent from my GT-P3100 using xda app-developers app

glsnjoseph said:
First of all let me thankyou for support
I have tried 2-3ROMs but none of them works for me...
I searched a lot to find how to flash ROM via odin but unfortunately I didnt find anyn useful thread.
Can u send a link of odin flashing method ,
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1606380 -All in one guide (read it thoroughly)
^flashing stock rom
^flashing CWM
And try Jana rom,official cm7, minicm7 at first because they boot very fast
And you cannot flash roms via odin. Odin is only for flashing stock firmware and recovery

I read that with 4 file package we can flash ROM (Official ) via odin,
In my case do I need to flash official firmware and then try Custom ROM or not
Kindly send a link to download 4 file package of stock firware
Unable to download from samfirmware.com
Sent from my GT-P3100 using xda app-developers app

You can download sock firmware from SAMMOBILE site. It is an open source website where you can download all samsung phone's official stock firmware.
Hit thanks if I help
Sent from cooperve.

glsnjoseph said:
I read that with 4 file package we can flash ROM (Official ) via odin,
In my case do I need to flash official firmware and then try Custom ROM or not
Kindly send a link to download 4 file package of stock firware
Unable to download from samfirmware.com
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
Link firmware with 4 files:
http://www.hotfile.com/dl/168101698/7eed3f5/S5670XWKTI_S5670DBTKT1_DBT.zip.html
The right click on ODIN and this:

Thanxs
I did iy with stock firmware downloaded from samfirmware.com
Now Im on syock firmware
Tried to install custom ROMS, but no luck still same problem android white text......
Sent from my GT-P3100 using xda app-developers app

glsnjoseph said:
Thanxs
I did iy with stock firmware downloaded from samfirmware.com
Now Im on syock firmware
Tried to install custom ROMS, but no luck still same problem android white text......
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
Not say thanx hit thanx button.
Hit thanks if I help
Sent from cooperve.

glsnjoseph said:
Thanxs
I did iy with stock firmware downloaded from samfirmware.com
Now Im on syock firmware
Tried to install custom ROMS, but no luck still same problem android white text......
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
Which customize ROM?
For customize ROM you need with ODIN instal Clockwork Mod Recovery (CWM).
http://forum.xda-developers.com/showthread.php?t=1339640
Now you can install custom ROM. Go in CWM and go on wipe data reset, wipe cashe partition in Advanced wipe dalvik cashe. Install ROM and again go on wipe data reset, wipe cashe partition and in Advanced, go on wipe dalvik cashe. Reboot phone. It need wait about 5 minutes for system up.

ZmisiS said:
Which customize ROM?
For customize ROM you need with ODIN instal Clockwork Mod Recovery (CWM).
http://forum.xda-developers.com/showthread.php?t=1339640
Now you can install custom ROM. Go in CWM and go on wipe data reset, wipe cashe partition in Advanced wipe dalvik cashe. Install ROM and again go on wipe data reset, wipe cashe partition and in Advanced, go on wipe dalvik cashe. Reboot phone. It need wait about 5 minutes for system up.
Click to expand...
Click to collapse
Dude I tried like that only , installed CWM with odin
But I have no idea whats wrong with my phone
I tried Jellybread and jana ROM but after flashing JanaROM its showed JanaROM boot image but nothing happened..
Sent from my GT-P3100 using xda app-developers app

glsnjoseph said:
Dude I tried like that only , installed CWM with odin
But I have no idea whats wrong with my phone
I tried Jellybread and jana ROM but after flashing JanaROM its showed JanaROM boot image but nothing happened..
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
I don't know because I not used Jellybread, and not I used Jana ROM. I used CM10.1.4 from here:
http://jenkins.androidarmv6.org/job/android/457/

glsnjoseph said:
Dude I tried like that only , installed CWM with odin
But I have no idea whats wrong with my phone
I tried Jellybread and jana ROM but after flashing JanaROM its showed JanaROM boot image but nothing happened..
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
When u are flashing any custom rom over the stock rom for the 1st time then u *should* necessarily wipe /system otherwise you'll get hanged up forever on that android-text/boot-up screen.

Galaxy_Rohit said:
When u are flashing any custom rom over the stock rom for the 1st time then u *should* necessarily wipe /system otherwise you'll get hanged up forever on that android-text/boot-up screen.
Click to expand...
Click to collapse
Actually I tried all the way dude
Googled a lot to find a solution but didnt find anything useful.
I tried to flash CM 10.1 but it shows booting but nothing else..
Only boot image ,,,,,,
But Im not ready to give up
Here I will explain the whole thing I did
1.I rooted my phone with help of update zip
2.I connected phone to computer in download mode and flashed CWM recovery via odin,, in that I selected ops tag and then one package with cwm.
3.after flashing CWM via odin , I entered into CWM mode by pressing Ok button +power on button.
4.I wiped data, cache, dalvik cache, formatted system
5.Install zip from sd card and selected my Custom ROM
6.AGAIN Wiped data, cache, , dalvikcache
7.Rebooted
Then It stucks in boot image or blank screen and sometimes in white android text...
Hope somebody can help me now
Sent from my GT-P3100 using xda app-developers app

glsnjoseph said:
Actually I tried all the way dude
Googled a lot to find a solution but didnt find anything useful.
I tried to flash CM 10.1 but it shows booting but nothing else..
Only boot image ,,,,,,
But Im not ready to give up
Here I will explain the whole thing I did
1.I rooted my phone with help of update zip
2.I connected phone to computer in download mode and flashed CWM recovery via odin,, in that I selected ops tag and then one package with cwm.
3.after flashing CWM via odin , I entered into CWM mode by pressing Ok button +power on button.
4.I wiped data, cache, dalvik cache, formatted system
5.Install zip from sd card and selected my Custom ROM
6.AGAIN Wiped data, cache, , dalvikcache
7.Rebooted
Then It stucks in boot image or blank screen and sometimes in white android text...
Hope somebody can help me now
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
Stock ROM work on your phone?

Bro! Goto "mounts & storage" & select "format /system"...(if u haven't done yet). Then try flashing custom rom. & always use cwm recovery by tjstyles v5.0.2.7
Let's hope for the best...:thumbup:

Galaxy_Rohit said:
Bro! Goto "mounts & storage" & select "format /system"...(if u haven't done yet). Then try flashing custom rom. & always use cwm recovery by tjstyles v5.0.2.7
Let's hope for the best...:thumbup:
Click to expand...
Click to collapse
Ya I have done that too
Formatted system from mounts and storage
Stock ROM works for me
Im on CWM 5.0.2.7
Sent from my GT-P3100 using xda app-developers app

glsnjoseph said:
Ya I have done that too
Formatted system from mounts and storage
Stock ROM works for me
Im on CWM 5.0.2.7
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
Do this straight away:-
1. Flash Froyo 2.2.1(4 package) of ur country.
2. Then flash Gingerbread 2.3.6(one package) of ur country.
3. Then flash cwm via Odin.
4. Flash the custom rom thereafter.
Since it seems a bit complex issue, u need to try this to ensure zero errors.:sly: Btw u can try above steps in ur spare time.
As for me, I always try all methods that I know b4 concluding anything.

My galaxy fit rebooting continuously

I had rooted galaxy fit with 2.3.6. Today i did factory reset on my phone including wiping memory card(as i had increased my internal memory using external sd). Since wiping and reset my phone is continuoudly rebooting. I also tried restore option but nothing happened. I do not know much about it. Please help.
Sent from my Micromax A116 using xda app-developers app

Did u use cwm recovery to format the samsung stock rom??:what: If yes... then it's O.K. No need to worry. Just flash any custom rom (cyanogenmod 7 recommended for flashing the very 1st time over samsung stock rom).
Note: Do format /system b4 flashing.:thumbup:

I do not have much idea about this. Would u please explain the procedure.
Sent from my Micromax A116 using xda app-developers app

Enter recovery mode by pressing & holding Home+Power buttons together when the phone is switched off.
Since ur phone isn't turning on & u mentioed that restore option is not working...I guessed that u might have cwm recovery...coz restore option belongs to cwm recovery... CWM recovery is used for custom roms...while the Android OS installed on the phone at the time of purchase has it own different recovery (known as stock recovery). Stock recovery has much less options than cwm recovery.
BTW how did u format ur phone...?? from settings or via recovery??:sly:

I did factory reset from setting. After that it restarted and opened the boot menu from wher i selected the wipe option
Sent from my Micromax A116 using xda app-developers app

During formatting via settings, the phone automatically reboots after succesful format. & boots directly to home screen (not ny boot menu).

Now can i get my phonr back in initial stage by flashing any rom or i will have to go to service centre.
Sent from my Micromax A116 using xda app-developers app

sunil birda said:
Now can i get my phonr back in initial stage by flashing any rom or i will have to go to service centre.
Sent from my Micromax A116 using xda app-developers app
Click to expand...
Click to collapse
You can get your phone back to initial stage by flashing a stock rom from http://www.sammobile.com/. There you will find a stock rom for your phone.

& follow the steps correctly bro...!!
For 4 pkg f/w(e.g. froyo):-
OPS: BENI_v1.0.ops
BOOT: APBOOT....
PHONE: MODEM....
PDA: CODE....
CSC: CSC....
For one pkg f/w(e.g. gingerbread):-
OPS: BENI_v1.0.ops
One Package: gingerbread.home.tar.md5
Hope this helps...!!!

thanks
thanks to galaxy_rohit and junnix for help.

sunil birda said:
thanks to galaxy_rohit and junnix for help.
Click to expand...
Click to collapse
Welcome bro...

Flashing custom rom will affect my app storage partion or not

Sir ,
I've flashed 2.5 gb app storage using sp flash tool in my a106 stock kitkat. Now if i will flash any custom rom using trwp recovery, the app storage will remain same or it will be changed to default(0.89gb) ??

Kanha390 said:
Sir ,
I've flashed 2.5 gb app storage using sp flash tool in my a106 stock kitkat. Now if i will flash any custom rom using trwp recovery, the app storage will remain same or it will be changed to default(0.89gb) ??
Click to expand...
Click to collapse
I don't know aboit twrp mode but i have dkne it by pc and iy gets changed, and i think so that it will change to 0.89 gb because custom roms will change settings too...

Kanha390 said:
Sir ,
I've flashed 2.5 gb app storage using sp flash tool in my a106 stock kitkat. Now if i will flash any custom rom using trwp recovery, the app storage will remain same or it will be changed to default(0.89gb) ??
Click to expand...
Click to collapse
"No, app storage will not change."
Usually , system repartition do not occur on installing new rom(same or other) b'coz rom developer do not put flash files for system partitioning in rom.
I've done it plenty of times..... feel free.

Nope!
The answer is NO!
Don't worry at all ! Nothing is going to change and you will be just fine!