Database Info

how to intall custom recovery on galaxy fit gt-s5670 on stock rom 2.3.6

i have stock rom 2.3.6 installed on my phone..
n i just flashed custom recovery from tj style.. wiped data n wiped cache
then i reboot bt my phone is nt starting now..its just keep rebooting again and again..plz help

you may have to reflash via oden ,i'm not sure

try to reflash your Stock 2.3.6 ROM via odin, and then flash tj_style's CWM via odin too

Syfer_Fever said:
try to reflash your Stock 2.3.6 ROM via odin, and then flash tj_style's CWM via odin too
Click to expand...
Click to collapse
hmmmm but the stock rom has rfs file system and so cwm can't be used on it

cwm can't use for Backup stock ROM
and if cwm can't installed in stock ROM how can we use Custom ROM? lol

lol i see
i have to install cwm using oden before using any custom rom thanks dude i'm new here =D

Dude what you have to do is paste any rom into root of your SD and flash via CWM wipe data and reboot it works it worked for me...
If u want to flash stock rom reflash the stock rom via Odin....
Press "thanks" if it helped u
Sent from my GT-S5670 using xda premium

andluv said:
Dude what you have to do is paste any rom into root of your SD and flash via CWM wipe data and reboot it works it worked for me...
If u want to flash stock rom reflash the stock rom via Odin....
Press "thanks" if it helped u
Sent from my GT-S5670 using xda premium
Click to expand...
Click to collapse
Thanks dude..
Day is exactly what I did n it worked 4 me:beer::beer::beer:
Sent from my GT-S5670 using XDA

vikas1038 said:
i have stock rom 2.3.6 installed on my phone..
n i just flashed custom recovery from tj style.. wiped data n wiped cache
then i reboot bt my phone is nt starting now..its just keep rebooting again and again..plz help
Click to expand...
Click to collapse
I had this prob yesterdqy,,
You need to flash the original stock rom before you can flash another rom..
Flash the "S5670XXKPI" stock with ODIN,, after that, your SGFit will be fine... You can flash other rom qfter you flash the original rom..
Good Luck!..
Sent from my GT-S5670 using xda premium

I installed stock ROM S5670XWKTI. After, I installed CWM. Via CWM I can install customize ROM, but I do not want a custom ROM than the stock ROM. All custom ROM have bugs. For me the most stable stock ROM. For example. for me on the CWM not work mount / system, cash, etc.
Yesterday I tried on stock ROM install 14 toggles Galaxy Fit , but before that the CWM has to go to mount / system that does not work for me.

You cant mount system via cwm on stock rom because to mount system, it must be ext4 witch is not in stock rom.
Sent from my GT-S5670 using Tapatalk

Dude, the CWM by Tj style is for the ext4 system... and the stock rom is RFS..
You should flash the CWM by Vish coz it support the RFS system , not the Tj style vers..
Cmiiw..
Sent from my GT-S5670 using xda premium

you guys CAN install CWM v5 by tj_style in stock ROM, but it CANNOT backup stock ROM wich is RFS, if u on stock ROM and then install cwm v5 via odin and u can directly flash custom ROM via CWM

CWM by Vish coz link for download

pito2204 said:
CWM by Vish coz link for download
Click to expand...
Click to collapse
Link:
http://forum.xda-developers.com/sho...ighlight=clockworkmod+recovery+for+galaxy+fit

http://forum.xda-developers.com/showpost.php?p=24719114
I use CWM_rfs.zip that posting by pratyush.creed and it works on my Stock ROM S5670JPKT4.

googler78 said:
http://forum.xda-developers.com/showpost.php?p=24719114
I use CWM_rfs.zip that posting by pratyush.creed and it works on my Stock ROM S5670JPKT4.
Click to expand...
Click to collapse
How you used. With Odin or ...?

Please post all questions in the Q&A section.
Thread Moved

[FIX] Flashing Stock Rom/Custom ROM over Angeeks ROM

I'm facing a weird problem. I can't flash stock rom via Odin. The phone is always stuck on the Samsung screen. Tried xxlq7/xxlq9. I'm on angeeks rom. Wanted to try the blueberry sensation rom.
So for that I tried flashing xxlq9 again as recommended and faced this issue.
EDIT [FIX]
As suggested by Kartik pat i was able to successfully flash stock rom over angeeks rom
I followed the following steps:
1. Take tb for all apps [angeeks rom]
2. Restore any gingerbread backup you might have from CWM. Boot your device.
3. Flash xxlq9 via Odinv3. Boot device
4. Flash cwm4. Boot device.
5. Flash ardatdat kernel v4.0 [ensures the erase bug issue is resolved]
6. Boot System
7. Reboot into recovery. Wipe data,cache,dalvik cache.
8. Boot system and tada
If you want to flash bb rom over this then:
1. Flash the bb rom v1. Reboot.
2. Flash the bug fix zip. Reboot.
3. Flash sensation mod
P.s. this method worked for me using the gb backup and cwmv4.
Hope this helps.
EDIT 2:
As posted by vikesh....
Hey Buddies,
I did few R&D over Angeek ROM. As we are facing problem after Flashing NORDIC ROM over this One.
Here is the procedure:
If you Have any Back of ICS / GB then only apply these changes. Coz I have already did this.
Caution: Please take your Backup before then Try to Do below mentioned steps.
1) Requirements:
1.1) Must b having Ardatdat's eMMC erased Kernel i.e. V4.0 & higher.
1.2) ODIN V 3.07
1.3) Latest Kies Installed (for USB drivers)
1.4) Latest XXQL9 NORDIC ROM
1.5) CMW 6.0.1.1 for CMW flashing & CMW 6.0.1.1.tar for ODIN.
1.6) A PC..(of course):silly:
2) Flashing:
As per Suggestion by chandanbs, NORDIC ROM is almost come with Full in System Rom Partition.
So, here is few suggestion which was already suggested by our Great Mj.vikram buddy over this Thread & see Post no #8 there.
Hope, your ROM Partition is 619/620MB.
After Flashing above procedure, If you have flashed Ardatdat's Kernel first & have installed any ROM Specially ANGEEK ROM(coz having problem in that rom particularly as per users) Then Follow the Process:
2.1) Go to CMW Recovery MOD & Install Latest CMW 6.0.1.1
2.2) Wipe Data/Factory Reset.
2.3) Go to CMW recovery again & Just Restore you previous backup of any ROM.
2.4) Open ODIN 3.07(Right Click over Exe & select "Run As Administrator") & Follow the steps for flashing Stock ROM using this tutorial
2.5) After Booting just Flash CMW V6 using ODIN 3.07.
2.6) Don't Wipe Data / Factory Reset or Wipe cache / dalvik Cache. Just let it boot.
Now you have Successfully Flashed Nordic ROM over Angeek / Any other ROM.
Sent from my GT-I9103 using xda app-developers app

Try to restore ur cwm backup of gb if u have and den flash ics
I did the same thing i was also using angeek's rom and now i m using BB

Can I restore my cwm backup over xxlq9?
Sent from my GT-I9103 using xda app-developers app

pulley06 said:
Can I restore my cwm backup over xxlq9?
Click to expand...
Click to collapse
yes you can and which ODIN version you are using for flashing better to flash using v3......

mj.vikram said:
yes you can and which ODIN version you are using for flashing better to flash using v3......
Click to expand...
Click to collapse
Mj i had similar issue...i want to taste mazel n was flashin ics stock rom..using odin 3.x but it stuck in mid way durin flashin...
Wat cld b d reason ?? Later i restored my cwm backup..
Sent from my GT-I9103 using Tapatalk 2

mj.vikram said:
yes you can and which ODIN version you are using for flashing better to flash using v3......
Click to expand...
Click to collapse
Yeah I was using v3
Okay so I wanted to use the bb rom...are these steps enough?
1. Take tb for all apps
2. Restore backup
3. Flash xxlq9 via Odin
4. Flash cwm
5. Flash ardatdat kernel
6. Wipe data
7. Wipe cache
8. Flash bb v1,fixes, sensation mod.
Sent from my GT-I9103 using xda app-developers app

vipul12389mehta said:
Mj i had similar issue...i want to taste mazel n was flashin ics stock rom..using odin 3.x but it stuck in mid way durin flashin...
Wat cld b d reason ?? Later i restored my cwm backup..
Click to expand...
Click to collapse
i am also not sure buddy i also faced this kind of issue once then i restored to GB and flashed it again, but i flashed Mazel on Leaked ICS so i thought it was the problem ......
pulley06 said:
Yeah I was using v3
Okay so I wanted to use the bb rom...are these steps enough?
1. Take tb for all apps
2. Restore backup
3. Flash xxlq9 via Odin
4. Flash cwm
5. Flash ardatdat kernel
6. Wipe data
7. Wipe cache
8. Flash bb v1,fixes, sensation mod.
Click to expand...
Click to collapse
yes buddy you are correct, you need to wipe all 3 ie data, cache & Dalvic cache..
But i feel its not mandatory to flash XXLQ9 because i use to flash on my Leaked ICS and it was working fine when i used it.....

i followed all the steps mentioned above...the phone booted to the home screen of xxlq9...flashed bb rom successfully as per cwm...but the phone is stuck on the samsung screen that comes after galaxy r appears

vipul12389mehta said:
Mj i had similar issue...i want to taste mazel n was flashin ics stock rom..using odin 3.x but it stuck in mid way durin flashin...
Wat cld b d reason ?? Later i restored my cwm backup..
Sent from my GT-I9103 using Tapatalk 2
Click to expand...
Click to collapse
It gets stuck for like 10-15 secs but later it flashes ROM properly,
@mj whats wrong to do it with V1.85?
@pulley I also faced same problem yesterday, but I think that time i did not mount/unmout system so I reflashed BB again by pressing two times mount>unmount (final would be unmount/system), so just press two times, still not booting then again wipe all 3 (cache,dalvik and data)

I think there is few points we should consider while flashing BB or MAZEL2 rom if u are on ANGEEK ROM.
If anybody who sucessfully flashed Stock rom & then BB or Mazel 2 after Angeek, must come in front and give us the solution.
@pulley: buddy, as u r the OP, pls add the procesure in ur OP(after getting the solution) and give ur thread name as "Flashing stock rom after Angeek rom". Coz lots of people are flashing over angeek and facing lots of problem.
Asap answer will b appriciated.
Sent from my GT-I9103 using xda premium

kataria.vikesh said:
@pulley: buddy, as u r the OP, pls add the procesure in ur OP(after getting the solution) and give ur thread name as "Flashing stock rom after Angeek rom". Coz lots of people are flashing over angeek and facing lots of problem.
Asap answer will b appriciated.
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
Done :good:

pulley06 said:
Done :good:
Click to expand...
Click to collapse
Great buddy. I will add this in Angeek ROM'S OP.
Sent from my GT-I9103 using xda premium

I don't have a gb backup den what should I do???
Sent from my GT-I9103 using xda premium

Optional Method
on request of pulley06 posting this
I was facing same problem from yesterday, so i followed this
1. remove battery/SDcard/SIM
2. wait for 5 minutes
3. insert SIM and SD card and plug USB cable in phone and connect it with laptop/PC (DO NOT INSERT BATTERY)
4. wait for one minute and now insert battery (With USB cable connected)
5. switch on
6. flash stock ICS and reboot
5 flash CWM (I used 5.5 for BB ROM) and reboot
7 enter CWM
8 Mount/Unmount> click on Unmount/system again click same (so click two times)
9 now flash BB ROM and Reboot
10. Enter CWM and repeat step 8 and flash Sensation Theme. and reboot.

vishu1991 said:
I don't have a gb backup den what should I do???
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
I hope the above post helps you :thumbup:
Sent from my GT-I9103 using xda app-developers app

vishu1991 said:
I don't have a gb backup den what should I do???
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
try flashing Stock GB through Odin.

i created back up of both nordic and austian rom (also gb)
with ardadat kernel
just restore
wipe data/ cache
and flash roms
i have no issue,

Nordic rom flashing over angeek mod rom
Hey Buddies,
I did few R&D over Angeek ROM. As we are facing problem after Flashing NORDIC ROM over this One.
Here is the procedure:
If you Have any Back of ICS / GB then only apply these changes. Coz I have already did this.
Caution: Please take your Backup before then Try to Do below mentioned steps.
1) Requirements:
1.1) Must b having Ardatdat's eMMC erased Kernel i.e. V4.0 & higher.
1.2) ODIN V 3.07
1.3) Latest Kies Installed (for USB drivers)
1.4) Latest XXQL9 NORDIC ROM
1.5) CMW 6.0.1.1 for CMW flashing & CMW 6.0.1.1.tar for ODIN.
1.6) A PC..(of course):silly:
2) Flashing:
As per Suggestion by chandanbs, NORDIC ROM is almost come with Full in System Rom Partition.
So, here is few suggestion which was already suggested by our Great Mj.vikram buddy over this Thread & see Post no #8 there.
Hope, your ROM Partition is 619/620MB.
After Flashing above procedure, If you have flashed Ardatdat's Kernel first & have installed any ROM Specially ANGEEK ROM(coz having problem in that rom particularly as per users) Then Follow the Process:
2.1) Go to CMW Recovery MOD & Install Latest CMW 6.0.1.1
2.2) Wipe Data/Factory Reset.
2.3) Go to CMW recovery again & Just Restore you previous backup of any ROM.
2.4) Open ODIN 3.07(Right Click over Exe & select "Run As Administrator") & Follow the steps for flashing Stock ROM using this tutorial
2.5) After Booting just Flash CMW V6 using ODIN 3.07.
2.6) Don't Wipe Data / Factory Reset or Wipe cache / dalvik Cache. Just let it boot.
Now you have Successfully Flashed Nordic ROM over Angeek / Any other ROM.
Requesting OP to add this one also in his OP Post.

Vikesh.. looks good.. please add few steps as to how to make this nordic room rooted.. as you cant directly flash ardatdat kernel over it as it already full in system rom partition.. :silly:

This means if I don't have an earlier backup of ics/gb and i am on angeeks rom I can't flash any new rom...plz clarify....
Sent from my GT-I9103 using xda premium

[Q] lost recovery

while rooting i lost my both recovery mod i.e stock as well as cwm and while reflashing it restore plz help me to return into stock recovery ...

Help guys
Sent from my Micromax A110 using xda app-developers app

If you r rooted then first install mobile uncle tool n if your phone is not booting the Sp flashtool is only option for you sorry....
Sent from my GT-I9100 using xda premium
Hit Thanks if its helpul.

sharartiprashant said:
while rooting i lost my both recovery mod i.e stock as well as cwm and while reflashing it restore plz help me to return into stock recovery ...
Click to expand...
Click to collapse
bro. i was facing also same problem.. try this...... download rom manager .. click on flash clockworkmode recovery... then u will see message on screen. like. " recovery for a110 is not available... then click option... select Micromax a70.. from the list.. then download and flash ..recovery of micromax a70.. then go to mobileuncle tools. .. select recovery update... select ur cwm file ... i.e. recovery.img ...flash it.. voila

Don't know how to root

Hai...currently I updated my phone to jb stock ROM by sp tools.... now I need to root my phone for installing custom roms ....please help
Sent from my Micromax A110 using xda app-developers app

In Google type how to root micromax a110 jellybean than follow website named droidviews.com there u can find complete tutorial of rooting by help of sp tool.
Hit thanks if I help you.
Sent from my GT-I8552 using xda app-developers app

How to Root A110 with Stock Jelly Bean
umar thameem said:
Hai...currently I updated my phone to jb stock ROM by sp tools.... now I need to root my phone for installing custom roms ....please help
Sent from my Micromax A110 using xda app-developers app
Click to expand...
Click to collapse
To Root our phone with Stock JB installed, first of all we need to first install cwm recovery and then we can root our phone.
so the steps for installing the cwm recovery is as follows
How to flash CWM recovery through sptool.
1. download CWM recovery and sptool. (from link beow)
2. Place the downloaded cwm recovery.img and "MT6577_Android_scatter_emmc.txt" file in the same folder.
3. run sptool.exe
4. select scatter-loading button on the right hand side pannel. and select "MT6577_Android_scatter_emmc.txt" (Please check that all the options of the box containing the list of files are unselected except for the option Recovery, see the attachment)
5. shut down the phone and remove battery.
6. in sptool press download button.
7. then connect your phone to the pc (remember phone should be shutdown status and without battery)
8. Press ok for the next windows containing warning that all the files are not selected.
9. wait for a minute then you'll see the green circle that means you have successfully flash cwm recovery.
Now you are ready to root your micromax a110 with jelly bean.
To Root JB follow these steps
1. download superSU from the link below or from the web (just google it for latest version.)
2. place the superSU.zip in the sdcard.
3. flash superSU through CWM recovery.
4. Reboot and enjoy rooting.
Links
for CWM recovery
http://forum.xda-developers.com/showthread.php?t=2287807
Press Thanks if i had helped you.

umar thameem said:
Hai...currently I updated my phone to jb stock ROM by sp tools.... now I need to root my phone for installing custom roms ....please help
Sent from my Micromax A110 using xda app-developers app
Click to expand...
Click to collapse
Flash suvi ROM v9 via flash tools ...this ROM is pre rooted and cwm installed

This is very very useful but will these work on windows 8
I also need drivers for it plz help if u can
Sent from my ST21i using xda app-developers app

[CUSTOM JB ROM] Stock S011 Deodexed ROM

XOLO Q3000 PURE STOCK DEODEXED ROM​
Hii All XOLO Q3000 users,
After a long wait -
Finally I bring to you pure stock rom
Features -
[*]Pure stock android 4.2.1
[*]S011_25022014 version
[*]Pre rooted
[*]Fully Deodexed - for theming
[*]Busybox support
[*]init.d support
[*]Zipalined - better ram usage
[*]Root explorer
[*]No tweaks, Completely stock
This custom ROM is blazing fast and bug free.
Feel free to use this as base ROM.
Steps for installation​ -
1. Put the ZIP into the ROOT of External/Internal SD Card
2. Go to Custom Recovery (CTR, CWM, OTHER)
3. Take a nandroid backup (Just for safety)
4. Wipe Data
5. Wipe Cache
6. Wipe System
7. Wipe Dalvik Cache
8. Select Install From SD (Internal or External)
9. Select the zip file and Select YES
10. Reboot Your System
11. Enjoy
Note:
I Will Not Be Responsible For Any Brick or Any Problem.....
So Flash At Your Own Risk.
This ROM only flashes System & Data partitions and DOES NOT change anything else.
SO chances of brick are 0 but still, please keep nandroid Backup ready which will be used if you find issues in the ROM so that you can revert back to your old system.
SCREENSHOTS in ATTACHMENTS​
DOWNLOAD LINK​
https://drive.google.com/file/d/0B4vVVUdhiimhU19JNklZYmpPelU/edit?usp=sharing
​
future development-
adding Mods to make it more lighter and smoother...
All kind of support is appreciated....
Credits:-
hadiyalkishan - for the stock rom.
Zen Arcade for Auto-Deodexer 4.3
Chainfire - for supersu
Ryuinferno - for init.d support
Thank You... Share Your Views...

Reserved for future use.

Great stuff....somehow i have always felt this rom is faster than the Kitkat one...lol....thanks Avi....

That's right ROM is more Smother & Faster than any custom rom
Sent from my Q3000 using XDA Premium 4 mobile app

Guys problem with my handset
I purchased my set on 15 Aug.
It was pre-loaded with Build_Q3000_S011_25022014
I Rooted the phone and installed the Custom recovery also, was working fine.
But, I want to increase the internal storage so I patched the storage
After then I was going to recovery (for wipe data, cache, emmc etc.) but recovery is not coming up, just Xolo logo came and disappeared, nothing further
I tried CWM, CTR & TWRP, all, but in vein ...
And if I revert back to Stock recovery then it's going in stock recovery, but there I can't flash any ROM or update error came "installation aborted"
Then I flashed my phone with Build_XOLO_Q3000_S003_15102013
Same position .... no recovery is working ...
Even I flashed KitKat ROM also but still Custom recovery not working
Can anyone help me ?

aabidhashmi said:
Guys problem with my handset
I purchased my set on 15 Aug.
It was pre-loaded with Build_Q3000_S011_25022014
..........
Can anyone help me ?
Click to expand...
Click to collapse
try format+download option in spflash tools

aabidhashmi said:
Guys problem with my handset
I purchased my set on 15 Aug.
It was pre-loaded with Build_Q3000_S011_25022014
I Rooted the phone and installed the Custom recovery also, was working fine.
But, I want to increase the internal storage so I patched the storage
After then I was going to recovery (for wipe data, cache, emmc etc.) but recovery is not coming up, just Xolo logo came and disappeared, nothing further
I tried CWM, CTR & TWRP, all, but in vein ...
And if I revert back to Stock recovery then it's going in stock recovery, but there I can't flash any ROM or update error came "installation aborted"
Then I flashed my phone with Build_XOLO_Q3000_S003_15102013
Same position .... no recovery is working ...
Even I flashed KitKat ROM also but still Custom recovery not working
Can anyone help me ?
Click to expand...
Click to collapse
try installing TWRP of Carliv 2.2
somehow Latest ones dont seem to work for me too

Screen flickers frequently while normal use n gaming... When using any browser it flickers a lot.... Tried all browsers...
Sent from my XOLO Q3000 using XDA Free mobile app

dk_richardp said:
Screen flickers frequently while normal use n gaming... When using any browser it flickers a lot.... Tried all browsers...
Sent from my XOLO Q3000 using XDA Free mobile app
Click to expand...
Click to collapse
Its a jellybean rom.
If u use this over a kitkat rom then it can flicker, u need to use/flash jellybean uboot.img if it flickers.

Unboot.img
avi3230 said:
Its a jellybean rom.
If u use this over a kitkat rom then it can flicker, u need to use/flash jellybean uboot.img if it flickers.
Click to expand...
Click to collapse
How to do that?
Sent from my XOLO Q3000 using XDA Free mobile app

dk_richardp said:
How to do that?
Sent from my XOLO Q3000 using XDA Free mobile app
Click to expand...
Click to collapse
use sptools
select scatter of jelly bean
deselect all files
select only uboot
flash

Ok i will do that... Right now no pc... So will donit later...
Sent from my XOLO Q3000 using XDA Free mobile app