Hello All,
I have a HP Envy M6 notebook, that the wrong Firmware was flashed onto its Touchpad. Now it does not work. The firmware for this "Synaptics TM2054" is not available (I have contacted both HP and Synaptics).
However, I have access to an identical HP M6 notebook, and I was hoping if someone can help with a tool that can Dump the Touchpad Firmware and ReFlash it?
There is a Synaptics Flashing tool and a Firmware Image File included in the attachment sp65951.rar encapsulated within the sp65951.exe file. Alas, the SynReflash64.exe can only Flash but not Dump and the image file included "PR1522164-tm2251-001_v1.5.img" is for (Synaptics TM2251) a different TouchPad.
However, the Firmware for the TM2054 is included within a Firmware Flashing tool SynapticsReflash.exe (which failed to execute on my Notebook) encapsulated in the SP59628.exe attached.
I really hope some one can help with this problem.
TIA, Simple.
Hi,
I have no solution for you because we have nothing here for your notebook?
Can I suggest to post your request here => Questions and Answers
I will hope that someone can give you some help
I suppose that you have tried to find a solution with "Google search".
Good luck
philos64 said:
Hi,
I have no solution for you because we have nothing here for your notebook?
Can I suggest to post your request here => Questions and Answers
I will hope that someone can give you some help
I suppose that you have tried to find a solution with "Google search".
Good luck
Click to expand...
Click to collapse
Thanks, Done!
Related
Hi,
I have new UG802 bricked after a flash update.
If I connect the dongle at TV I see the image of "recovery system 4.2"
If I choose to update the firmware from a file does not work. Android gives me error and I can not go on as a photo 1, 2 and 3.
I tried to load the firmware Finless 18 with a single zip file that have system.img compressed.
I have see more post in this site with a procedure for unbrick with use a reset pin but in my PBC board don't have a reset as a youtube guide http://www.youtube.com/watch?v=4dlQkaDcgSY
Can you help me please?
Thanks
I have also used the original firmware http://www.ugoos.tv/ but I have the same problem.
answer from a noob
well, why don't you uninstall it and continue to use the original one while waiting for some some solutions coming out. sorry ,I'm a noob ,it's the best I can do .
Hasoffer said:
well, why don't you uninstall it and continue to use the original one while waiting for some some solutions coming out. sorry ,I'm a noob ,it's the best I can do .
Click to expand...
Click to collapse
I would like to follow your advice but I can not update the device. Does not make me load a firmware of any kind. I would like some advice on how to make at least a firmware reload and restart it.
Dear Forum Members,
I have purchased this tablet and I wasn´t able to install bigger apps due to the ROM partiton, so I have decided to extend the ROM partition by using this guide found on google: "[HONGMI/REDMI]How to increase /data partition size " which uses Meteos.apk
and I have bricked my tablet.
I am stuck in boot screen:
when I am applying official FW through CWM I got a messsage Error: Partition table not match.
When I am applying my backup CWM I got a message : Installation aborted.
I was also trying to use adb to use custom rom, however I got a message: Error: Invalid OTA package, missing scatter.
I would like to ask, if there is some way how to unbrick it?
I would trully appreciate any advice
Hi
Likely you need to flash the stock firmware again for your device. I can't find anything relevant on XDA for that though. So you can ask for help here,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Though it may be best to try the manufacturer website for firmware and flashing instructions.
Good luck!
Thanks for the reply.
I have found the stock FW, but it gives an error message : Invalid OTA package. missing scatter
Maybe a new scatter would help, but I have no idea how to get one, because this is kind of rare tablet.
Exactly. So finding help here will be difficult likely. But post where I suggested and perhaps you'll get some answers.
Or again, try manufacturer site for help.
Darth said:
Exactly. So finding help here will be difficult likely. But post where I suggested and perhaps you'll get some answers.
Or again, try manufacturer site for help.
Click to expand...
Click to collapse
Thanks a lot
hi my ROOTED acer Z500 is stuck in system recovery mode. this happened after i update it. the title says
Android system recovery <3e>
Acer_AV0K0_Z500_1.003.00_AAP_GEN1
i tried using all the OS from ”Download Drivers and Manuals | Acer Official Site“ but when i use "apply update from external storage" it says
——Install /sdcard...
Installing update...
This package is for "z500_la_gen1" sku；
this is a “z500_aap_gen1".
Installation aborted.
i also tried using custom ROM from online but it says :
——Install /sdcard...
Installation aborted.
i also went to the Acer Service & Support center, the staff says i violent the warranty so ya...
i know i need to flash the correct file but i can't find the correct file! i tried another file called :
OS_Acer_AV052.Z130.1.004.00.AAP.GEN1_A42J_A
but still it did not work.......yes, yes i know i should google and find the right file but the thing is, i can't find the right one! i know i should not be ask this but is it ok if someone post the link to a website where i can find the right file? and yes i did use different search engine. please help T-T
beishi1241 said:
hi my ROOTED acer Z500 is stuck in system recovery mode. this happened after i update it. the title says
Android system recovery <3e>
Acer_AV0K0_Z500_1.003.00_AAP_GEN1
i tried using all the OS from ”Download Drivers and Manuals | Acer Official Site“ but when i use "apply update from external storage" it says
——Install /sdcard...
Installing update...
This package is for "z500_la_gen1" sku；
this is a “z500_aap_gen1".
Installation aborted.
i also tried using custom ROM from online but it says :
——Install /sdcard...
Installation aborted.
i also went to the Acer Service & Support center, the staff says i violent the warranty so ya...
i know i need to flash the correct file but i can't find the correct file! i tried another file called :
OS_Acer_AV052.Z130.1.004.00.AAP.GEN1_A42J_A
but still it did not work.......yes, yes i know i should google and find the right file but the thing is, i can't find the right one! i know i should not be ask this but is it ok if someone post the link to a website where i can find the right file? and yes i did use different search engine. please help T-T
Click to expand...
Click to collapse
Greetings and welcome to assist. It looks like you already asked this question before
http://forum.xda-developers.com/showthread.php?t=3484040
Try asking your question here
http://forum.xda-developers.com/android/development/-t3143318
hopefully the experts there can assist you
Good Luck
Sawdoctor
hello, thank you so much for replaying.
but i have cheek and the "experts" there have been offline for half a year already! do you know who or where else i can ask to get help please?
beishi1241 said:
hello, thank you so much for replaying.
but i have cheek and the "experts" there have been offline for half a year already! do you know who or where else i can ask to get help please?
Click to expand...
Click to collapse
I will try my best to help you but am not that familiar with your device. Do you know if your phone was originally AAP_GEN1 or la_gen1 before you updated it ? It may be something as simple as renaming the package to z500_aap_gen1
Regards
Sawdoctor
sawdoctor said:
I will try my best to help you but am not that familiar with your device. Do you know if your phone was originally AAP_GEN1 or la_gen1 before you updated it ? It may be something as simple as renaming the package to z500_aap_gen1
Regards
Sawdoctor
Click to expand...
Click to collapse
hmm...i am not very sure....but i am sure i did not update it before, and only have rooted the phone. i did not do anything else to the phone. (sorry for my poor english~) may i know if i have to just renaming the package? if yes which image shoould i use? i went to the official acer website( https://www.acer.com/ac/en/US/content/support-product/5579?b=1 )and have found a few image there
which image should i use and rename?
thanks again so much for replying ! (you made my day )
beishi1241 said:
hmm...i am not very sure....but i am sure i did not update it before, and only have rooted the phone. i did not do anything else to the phone. (sorry for my poor english~) may i know if i have to just renaming the package? if yes which image shoould i use? i went to the official acer website( https://www.acer.com/ac/en/US/content/support-product/5579?b=1 )and have found a few image there
which image should i use and rename?
thanks again so much for replying ! (you made my day )
Click to expand...
Click to collapse
All I can see there is kernel source codes not any roms. In there support forum i did see someone with a very similar issue to you who was helped. Have you tried asking in there as well
Regards
Sawdoctor
sawdoctor said:
All I can see there is kernel source codes not any roms. In there support forum i did see someone with a very similar issue to you who was helped. Have you tried asking in there as well
Regards
Sawdoctor
Click to expand...
Click to collapse
ok, i will try asking there( i did not know i could post form >_> ) thanks a lot
Hello,
Please see the Pictures.
Can anybody help?
This Device is fake android 8.1. It is really 6.0.
Is it possible to flash any costume rom?
Where I can find mcu updates?
I know I have to flash 3562.bin files but I only find files for Benz and not for Audi.
Thanks
Greez
Some more informations about the device.
Kruss612 said:
Some more informations about the device.
Click to expand...
Click to collapse
If it's connected to internet, install the android checker app from playstore and that will give you correct info
Ok thank you
I will try it.
I could not find the app.
But I have take three more pictures.
I don't know now where I have to search for the right firmware.
Hello, unfortunately I could not clearly identify the device. in the internet, I find little firmware for mk3562. apparently the firmware works from a ownice c500. Can you please look at the attached pictures and tell me which keywords I could search? Furthermore, I have a usb a usb a cable purchased but the device is not recognized under flash tool in windows. it only has one reset button. How do I get into recovery? Thanks for your help
Please, i really need your help.
Forgot the pics sorry
I need help to resurrect this autorodio after a failed attempt to update firmware it died if anyone can help with the firmware and how can I do the recovery I'm eternally grateful.
Does your manufacturer provide firmware files you can flash with SP Flash Tool? (I'm assuming your car has a USB port) As it would be the stock firmware, bootloader unlocking shouldn't be an issue.
$cronos_ said:
Does your manufacturer provide firmware files you can flash with SP Flash Tool? (I'm assuming your car has a USB port) As it would be the stock firmware, bootloader unlocking shouldn't be an issue.
Click to expand...
Click to collapse
Good night friend, the problem is that I have already contacted the seller several times and I have not received an answer. a question if I have a backup of another device like it, can I resurrect the other one? The SP flash tool works with these autoresponders. Thank you
Good morning I need help I bought this autorodio with 6 gigs of ram and 128 of rom as shown in the photo I tried to install the gps program with 25 gigs and it tells me it has no disk space. I downloaded the cpu x app and it shows these values will be that is correct? Thank you
epidoral said:
Good night friend, the problem is that I have already contacted the seller several times and I have not received an answer. a question if I have a backup of another device like it, can I resurrect the other one? The SP flash tool works with these autoresponders. Thank you
View attachment 5606077
Click to expand...
Click to collapse
If the other device works fine, then, yes, you can copy the flash to your car radio thing
Not Android Automotive OS, requested moderator move to Android Head-Units forum.
marchnz said:
Not Android Automotive OS, requested moderator move to Android Head-Units forum.
Click to expand...
Click to collapse
At least this is a FYT unit, so the thread should be moved to "FYT Android Head Units"...
epidoral said:
I need help to resurrect this autorodio after a failed attempt to update firmware it died if anyone can help with the firmware and how can I do the recovery I'm eternally grateful.
Click to expand...
Click to collapse
By now this topic is already a bit older.
Which firmware did you use to flash your unit?
I see you have one of those 1280x640 units. Mostly these require some specific tweaks due to their different screen shape.
And looking at your first image: it seems like a very long portrait photo. Is that of your unit but then sideways?
I assume in that case that you need to modify the
Code:
ro.sf.swrotation=xy
(values 0, 90, 180, 270) .
This could even be done with an empty flash image only using a config.txt with the correct value.
And please: don't start a topic with only "help". That is the most stupid title to start a topic with and does not give anyone a clue whether they can help you or not.. Please edit your first post and create a more meaningful title.
epidoral said:
Good morning I need help I bought this autorodio with 6 gigs of ram and 128 of rom as shown in the photo I tried to install the gps program with 25 gigs and it tells me it has no disk space. I downloaded the cpu x app and it shows these values will be that is correct? Thank you
Click to expand...
Click to collapse
You were misled.
Your unit is NOT a 6/128, it's a 3/32