Related
Hi All,
I have been trying so hard past few days update my HD7 after getting notification. The update always suck at step two(downloading at 6%) and error code shown 801811A3. I have been installing Microsoft Fit for this code in Window 7, but still no luck to complete downloading. I have tried out more than 5 times and getting very annoy on this.Is out there anyone still facing this or anyone can help to share your experience, thanks a lot...
Your phone is jailbreak with chevronwp7?
semaka13 said:
Your phone is jailbreak with chevronwp7?
Click to expand...
Click to collapse
Yes. Jailbreak with lots of side loaded apps.
You cand find good tips here:
http://support.microsoft.com/kb/2484484/class=/en-us#801811A3_801811A8_8018119C
If you realy wanted, you know you cand hard reset, and all will go smoth. after that u will have to find a way to unlock it again.
If you already know this, tell us please how you solve the problem.
i had same problem...u should go to services and enable error reporting device...then connect with zune and update should work...worked for me...
barovidiu said:
You cand find good tips here:
http://support.microsoft.com/kb/2484484/class=/en-us#801811A3_801811A8_8018119C
If you realy wanted, you know you cand hard reset, and all will go smoth. after that u will have to find a way to unlock it again.
If you already know this, tell us please how you solve the problem.
Click to expand...
Click to collapse
Thanks for reply. I follow exactly the procedure of Microsoft Fix as mentioned should solve my problem, but yet no chance to get thru download state. This fix does not fix my PC, too bad.
I believe it is not my phone having problem, but the my PC (Zune software in particular) just could not get the file downloaded and complete the whole cycle...hard reset help?????
panicos michael said:
i had same problem...u should go to services and enable error reporting device...then connect with zune and update should work...worked for me...
Click to expand...
Click to collapse
Thanks for reply. Could you please be more specific guiding me the whole process of such setting on my PC. I m using Window 7 Home. Thanks in advance.
Stock rom with occidental google apps that cam with the 2nd gen of V6888 (The one with no logo and with the back you can remove from top right)
No Root, no Recovery, but no chinese apps: just for prople who wants to restore the phone to a clean stock rom then you can easily root and add recovery.
I had to ask a seller for it, Pandawill has only the old one with tons of china apps and no european market.
The archive contains drivers with explanation, SP Flash Tools and the folder with the rom itself.
You must use "download" function since BOOT ini will remain the older one.
Apparently this firmware saved even my camera that didn't work before.
Be careful and, anyhow, you can find the older stock rom from Pandawill easily.
Here is the UbuntuOne Link
Hero V6888.rar
Mediafire Mirror:
Hero_V6888.rar
Hello
I have download Hero V6888.rar and extracted. but i dont understand how to restore this on my phone. Where may i find explanation to do it ?
If you did it, can you explain me how to do that, please ?
and please excuse my poor english.
Would help
Zqren5 said:
Hello
I have download Hero V6888.rar and extracted. but i dont understand how to restore this on my phone. Where may i find explanation to do it ?
If you did it, can you explain me how to do that, please ?
and please excuse my poor english.
Click to expand...
Click to collapse
If DioMorgan could give a bit of a tutorial for us newbies as to how to achive this. Is Englsih playstore available (preinstalled) with this ROM ?
Thanks in advance.
Help
onlydongles said:
If DioMorgan could give a bit of a tutorial for us newbies as to how to achive this. Is Englsih playstore available (preinstalled) with this ROM ?
Thanks in advance.
Click to expand...
Click to collapse
Where are you Diomorgan? Can anyone do small tutorial for newbies, please?
Thanks
onlydongles said:
Where are you Diomorgan? Can anyone do small tutorial for newbies, please?
Thanks
Click to expand...
Click to collapse
Inside the rar you'll find the flash tool, just follow a tutorial to flash an MTK.
In a nutshell:
-open the SPFlashTool
-choose file->open scatter and select the scatter in the firmware folder (there is just one, you can't go wrong)
-connect the phone to the computer (Win only, sorry) without the battery, press Download, then Ok when he says boot.ini is missing
-insert the battery and the it will start flashing the firmware till you see a green circle.
Disconnect, boot, and here you are!
http://www.youtube.com/watch?v=cdUdHejJor4
here is a video of a full tutorial that consider even the driver setup, but you don't need it if you installed snappea or PDAnet , since the MTK driver are installed by those two software.
Or just google around for the MTK6577 drivers, maybe you can find them in a standalone installer.
If you have win 7/8 remember to allow the non signed driver installation (google is your friend here too...hehehe)
Thanks DioMOrgan
I have few questions:
Will this work on an already rooted phone? (more like do I have to skip any steps so as not to root it again?)
Does this install ENglish Play store (You mentioned Occidental but was not sure of which language it might contain)
WIl this also cure the satellite and GPS problmes reported elsewhwre?
Kindly guide me.
Thanks
Hi.
How can I install that rom through Recovery Mode ?
Thanks in advance
After messing with copying play store file in system/app folder phone rebooted and wont boot. I followed Diomorgan flash tutorial, but after connecting the phone nothing happens.Didn't even asked to install any drivers or found new device.after inserting the battery phone start charging. now phone wont boot, hangs at shouyue logo.please help
Diomorgan said:
Inside the rar you'll find the flash tool, just follow a tutorial to flash an MTK.
In a nutshell:
-open the SPFlashTool
-choose file->open scatter and select the scatter in the firmware folder (there is just one, you can't go wrong)
-connect the phone to the computer (Win only, sorry) without the battery, press Download, then Ok when he says boot.ini is missing
-insert the battery and the it will start flashing the firmware till you see a green circle.
Disconnect, boot, and here you are!
youtube url = "ALL new users prevented from posting outside links in their messages"
here is a video of a full tutorial that consider even the driver setup, but you don't need it if you installed snappea or PDAnet , since the MTK driver are installed by those two software.
Or just google around for the MTK6577 drivers, maybe you can find them in a standalone installer.
If you have win 7/8 remember to allow the non signed driver installation (google is your friend here too...hehehe)
Click to expand...
Click to collapse
:good: worked like a charm on my new v6888 (just received it in my mailbox and it was full in chinese stuff ,even in playstore)
thank you
Help
daf3m said:
:good: worked like a charm on my new v6888 (just received it in my mailbox and it was full in chinese stuff ,even in playstore)
thank you
Click to expand...
Click to collapse
I have the same problem as the earlier poster.
Am now stuck on the Shouyue screen. Tries factory mode and reboot, but same thing.
HELP PLEASE?
Hope i have not bricked it. (Maybe a soft brick)
If I do volume up and power button. I get the dead ANdroid with red traingle.
Please help.
I don't have the phone anymore, but as far as I remember if you got the dead android or you are stuck on logo just refla**** again.
You must press DOWNLOAD BEFORE you conbect it and remember to get the MTK drivers and install them before!
Sent from my GT-I9505G using xda premium
Hero V6888 OUT!!! :''(
Diomorgan said:
Inside the rar you'll find the flash tool, just follow a tutorial to flash an MTK.
In a nutshell:
-open the SPFlashTool
-choose file->open scatter and select the scatter in the firmware folder (there is just one, you can't go wrong)
-connect the phone to the computer (Win only, sorry) without the battery, press Download, then Ok when he says boot.ini is missing
-insert the battery and the it will start flashing the firmware till you see a green circle.
Disconnect, boot, and here you are!
Click to expand...
Click to collapse
Guys are Italian and I write a little bad English: I am in a serious fix, my V6888 is corrupted.
I followed the guide you provided, only that when I came out the inscription that is missing the BOOTIMG I have posted the file "uboot_bd86_77_emmc_v6888.bin" inside the folder of ROMS and I gave the OK. I have installed everything except that now the phone stops on initial Android logo and does not go ahead, it seems to go right. What can I do to recover? I tried to redo the flash without check of BOOTIMG, installed everything again but the phone does the same defect. How do I save it? Please help!!! Thank you all and have a nice day!!!
DeejayAlex73 said:
Guys are Italian and I write a little bad English: I am in a serious fix, my V6888 is corrupted.
I followed the guide you provided, only that when I came out the inscription that is missing the BOOTIMG I have posted the file "uboot_bd86_77_emmc_v6888.bin" inside the folder of ROMS and I gave the OK. I have installed everything except that now the phone stops on initial Android logo and does not go ahead, it seems to go right. What can I do to recover? I tried to redo the flash without check of BOOTIMG, installed everything again but the phone does the same defect. How do I save it? Please help!!! Thank you all and have a nice day!!!
Click to expand...
Click to collapse
I solved it by installing Pandawull ROM first and then reinstalling this without BOOTIMG. Doing this everything was fine, now the phone works fine! Thanks all the same!!: Vittoria:
Softbrcik
Diomorgan said:
I don't have the phone anymore, but as far as I remember if you got the dead android or you are stuck on logo just refla**** again.
You must press DOWNLOAD BEFORE you conbect it and remember to get the MTK drivers and install them before!
Sent from my GT-I9505G using xda premium
Click to expand...
Click to collapse
It deosnt allow me to go forward. I tried the volume down and power button and it just comes up with the factory page where you test the hardware and reboot.(Blue screen). Doesnt give me download OR recover options. Usually yellow/green.
Even the mtk 6577 drivers are difficult to load on WIndows XP sp3. (although it says downloaded successfully). When connecting this softbricked phone, nothing happens!
Any ideas and help please?
Thanks in advance
Sorted
onlydongles said:
It deosnt allow me to go forward. I tried the volume down and power button and it just comes up with the factory page where you test the hardware and reboot.(Blue screen). Doesnt give me download OR recover options. Usually yellow/green.
Even the mtk 6577 drivers are difficult to load on WIndows XP sp3. (although it says downloaded successfully). When connecting this softbricked phone, nothing happens!
Any ideas and help please?
Thanks in advance
Click to expand...
Click to collapse
Hey Guys, finally cracked it. Had to do it in a WIndows 7 machine. Wa a bit of struggle getting all the drivers. Fially using the SP tools as suggested by Diomorgan, managed to flash the ROM and make the phone alive again.
Thank you very much Dimorgan for th time and patience in helping me/us. Really appreciated.
One question, which stock rom is this? Can I upgrade with another ROM? ANy tutorials?
Can I also upgrade to Jellybean? 4.1 or 4.2
Any suggestions ?
Thanks again.
ActuallyI don't know is coincity will port JB to the phone,but the hardware is pretty capable!
Inviato dal mio Nexus 7 con Tapatalk 4
Is there a way to install this Rom from SD card, because my port for connection to PC don't work
Which is last available rom and upgrdable for v6888
CIAO,
I have a v6888 smartphone with android 4.0.4
firmware version is BD86_77__V00_SHOUYUE_W33_V02_121122
I would know this:
- is it the last one available for this phone ?
- where could i look for ?
- can anyone tell me if there is a better rom ?
It happens also this problem: when added a SD card, after some weeks, SD card goes broken. It happened 3 times. WHAT CAN I DO TO REMOVE THIS PROBLEM ??
BYE
nobody can help me ???
ippore said:
CIAO,
I have a v6888 smartphone with android 4.0.4
firmware version is BD86_77__V00_SHOUYUE_W33_V02_121122
I would know this:
- is it the last one available for this phone ?
- where could i look for ?
- can anyone tell me if there is a better rom ?
It happens also this problem: when added a SD card, after some weeks, SD card goes broken. It happened 3 times. WHAT CAN I DO TO REMOVE THIS PROBLEM ??
BYE
Click to expand...
Click to collapse
nobody can tell me where can i find rom for this smartphone ???
there in NO site where can i find SHOUYUE SUPPORT ????
PLEASE !!!
BYE
I think so
ippore said:
nobody can tell me where can i find rom for this smartphone ???
there in NO site where can i find SHOUYUE SUPPORT ????
PLEASE !!!
BYE
Click to expand...
Click to collapse
There is not much development since last year. I just about managed the 4.0.4 for English play store and stuff.
Hi all im just looking at a cheap phone for my mom that will pretty much just be used for phone calls and texts but I was wondering if anyone has got one of these phones and if you can root them so I can delete some rubbish off it so she has got some more room for apps as they only have 4g I believe if anyone could help id be really grateful
Jxt. said:
I didn't see any sites that talks about rooting, but you should check out the one click rooting application to see if your device is supported.
Click to expand...
Click to collapse
Thanks I'll give it a try when it comes through
Has anyone got a link to this app please and also is this the only way that may be possible thanks
Rooting DG100
galaxys3_newbie said:
Thanks I'll give it a try when it comes through
Click to expand...
Click to collapse
I'm also contemplating rooting one of these and would appreciate if you could comment on the success of One Click Rooting.
Thanks
I will do just waiting for it to come through what do you thonk of the phone
Sent from my GT-I9300 using xda app-developers app
galaxys3_newbie said:
I will do just waiting for it to come through what do you thonk of the phone
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Try Shuame
I've bought one of these Doogee DG100 smartphones, had it about a month now, and it's really excellent value for the price - I can't find anything I don't like about it. Well built, great phone and I'd highly recommend it. Well, Ok, the plastic fake leather cover's a bit naff, but hey.
I've rooted it using SRSRoot, flashed the latest firmware from the Doogee download site and I use MKTDroid for ADB access etc.
I removed all of the junk I didn't want, and removed the preloaded apps (twitter, whatsapp, skype etc) and reinstalled them from the Play Store - I didn't trust that some of them wouldn't update properly.
Managed to brick it too by doing dumb stuff, but the Doogee Flashtool just let me reflash the firmware and away it goes again.
Seems pretty bullet proof. Let me know if you get stuck and I'll try to help out.
Good luck!
the flash tool
serafis said:
I've bought one of these Doogee DG100 smartphones, had it about a month now, and it's really excellent value for the price - I can't find anything I don't like about it. Well built, great phone and I'd highly recommend it. Well, Ok, the plastic fake leather cover's a bit naff, but hey.
I've rooted it using SRSRoot, flashed the latest firmware from the Doogee download site and I use MKTDroid for ADB access etc.
I removed all of the junk I didn't want, and removed the preloaded apps (twitter, whatsapp, skype etc) and reinstalled them from the Play Store - I didn't trust that some of them wouldn't update properly.
Managed to brick it too by doing dumb stuff, but the Doogee Flashtool just let me reflash the firmware and away it goes again.
Seems pretty bullet proof. Let me know if you get stuck and I'll try to help out.
Good luck!
Click to expand...
Click to collapse
Hi,
I don't know if it's because it's all written in Chinese when I get to the page with the actual zip on it or if it's because I'm blind and am missing some important visual cue on the page, but I can't figure out how to download the firmware or how to get the tools. Any advice on this? I even tried looking at the source code to see if there is a direct link to the file, but it's all full of JavaScript.
Incidentally, is there any indication on the site as to whether we might expect a newer version of Android on this phone in the future?
problem with dg100
Hi, i need your help to fix my DG100, i tried to upgrade following the instructions in the website of Doogee and now the phone is not working at all. when i click in UPGRADE&FIRMWARE and connect the phone i got an error: SP FLASH TOOL ERROR: (8045) NO VALID PARTITION MANAGEMENT TABLE (PMT) FOR STORAGE DEVICE and when i click in DOWNLOAD and connect the phone i got : BROM ERROR: S_NOT_ENOUGH_STORAGE_SPACE (1011). Please, can you tell what i must do for fix this problem?. Thank you for your help.
Firmware 0926
tuxedo116 said:
Hi, i need your help to fix my DG100, i tried to upgrade following the instructions in the website of Doogee and now the phone is not working at all. when i click in UPGRADE&FIRMWARE and connect the phone i got an error: SP FLASH TOOL ERROR: (8045) NO VALID PARTITION MANAGEMENT TABLE (PMT) FOR STORAGE DEVICE and when i click in DOWNLOAD and connect the phone i got : BROM ERROR: S_NOT_ENOUGH_STORAGE_SPACE (1011). Please, can you tell what i must do for fix this problem?. Thank you for your help.
Click to expand...
Click to collapse
If you use the SP_Flash_Tool_v3.1320.0.174, you will manage to overcome that problem, but then you'll face the real one. The real problem is that your,phone like mine too, has a different version LCD display, that needs firmware 0926 to work right. If you use 0917, phone will flash, reboot, but show garbage on screen. I am asking Doogee to provide me the 0926 firmware (the one that my phone had installed when it arrived 5 days ago), but they don't reply to my mails. It also seems that the new display is not IPS as the earlier versions, as it greys while on angle and shows color shifting (obvious even with garbage on screen...).
I am waiting for a second DG100 within next week, so if anyone can share a way about extracting 0926 firmware from it, i would be obliged...
Asterisd said:
If you use the SP_Flash_Tool_v3.1320.0.174, you will manage to overcome that problem, but then you'll face the real one. The real problem is that your,phone like mine too, has a different version LCD display, that needs firmware 0926 to work right. If you use 0917, phone will flash, reboot, but show garbage on screen. I am asking Doogee to provide me the 0926 firmware (the one that my phone had installed when it arrived 5 days ago), but they don't reply to my mails. It also seems that the new display is not IPS as the earlier versions, as it greys while on angle and shows color shifting (obvious even with garbage on screen...).
I am waiting for a second DG100 within next week, so if anyone can share a way about extracting 0926 firmware from it, i would be obliged...
Click to expand...
Click to collapse
Hi, thank you for your answer, i am using SP_Flash_Tool_v3.1320.0.174 but nothing happen, could you please tell me, how can i do to overcome the problem?, thank you.
tuxedo116 said:
Hi, thank you for your answer, i am using SP_Flash_Tool_v3.1320.0.174 but nothing happen, could you please tell me, how can i do to overcome the problem?, thank you.
Click to expand...
Click to collapse
Ok, i managed to get my phone working again, by using an extracted rom from a phone with 0926 firmware.
h**ps://docs.google.com/file/d/0B2JMI3yL-RxZWHdYaFYycDhsdUE/edit?usp=sharing
Download this files, extract them in folder with firmware 0917 and then flash them to the phone. This will work until we get the firmware from the factory (if it ever publishes it). Doogee no more for me, by the way, their customer support sucks...
Files from 0926
Asterisd said:
Ok, i managed to get my phone working again, by using an extracted rom from a phone with 0926 firmware.
h**ps://docs.google.com/file/d/0B2JMI3yL-RxZWHdYaFYycDhsdUE/edit?usp=sharing
Download this files, extract them in folder with firmware 0917 and then flash them to the phone. This will work until we get the firmware from the factory (if it ever publishes it). Doogee no more for me, by the way, their customer support sucks...
Click to expand...
Click to collapse
Yo, i tried using the files you uploaded to flash. however, i am still faced with the BROM ERROR: S_NOT_ENOUGH_STORAGE_SPACE (1011). btw, i also used the SP_Flash_Tool_v3.1320.0.174
dealer12 said:
Yo, i tried using the files you uploaded to flash. however, i am still faced with the BROM ERROR: S_NOT_ENOUGH_STORAGE_SPACE (1011). btw, i also used the SP_Flash_Tool_v3.1320.0.174
Click to expand...
Click to collapse
Doogee announced new firmwares, 0926 and 1101 for DG100 at their site. Try 1101 first and then the 0926.
Solution
I solved the problem of the error 4032, steps:
1) i used windows xp, i don't know if it will work in windows 7.
2) i did use firmware 9_26 and flashtools v3.1328.
3) select the scatter of the firmware 9_26, leave marked only PRE-LOADER and click in DOWNLOAD.
4) Keep pushed (power) + (volume -) and connect the cable to the pc. You must see the red line, then purple and finally the green circle, then disconnect the cable.
5) Now unmark PRE-LOADER and mark the rest of the options and click in DOWNLOAD; then connect the cable keeping the buttons (power) + (volume -) pushed; now you must see the red line, then the yellow line and the green circle.
Thanks to Asterisd for your advice.
serafis said:
I've bought one of these Doogee DG100 smartphones, had it about a month now, and it's really excellent value for the price - I can't find anything I don't like about it. Well built, great phone and I'd highly recommend it. Well, Ok, the plastic fake leather cover's a bit naff, but hey.
I've rooted it using SRSRoot, flashed the latest firmware from the Doogee download site and I use MKTDroid for ADB access etc.
I removed all of the junk I didn't want, and removed the preloaded apps (twitter, whatsapp, skype etc) and reinstalled them from the Play Store - I didn't trust that some of them wouldn't update properly.
Managed to brick it too by doing dumb stuff, but the Doogee Flashtool just let me reflash the firmware and away it goes again.
Seems pretty bullet proof. Let me know if you get stuck and I'll try to help out.
Good luck!
Click to expand...
Click to collapse
I've done the extact same thing however I am not able to download twitter, whatsapp, skype or facebook after uninstalling and reinstalling in Play Store. The message I receive is the software is not digitally signed. The camera sucks really bad after doing the latest firmware upgrade. Is it me or am I missing something in the process ?
Doogee Collo Dg100 boot problem
I have a Doogee Collo DG100.
I have tried to flash a new ROM but at the middle of the process I got an error from SP Flash Tool "BROM ERROR:S_NOT_ENOUGH_STORAGE_SPACE(1011)". Now the phone does not start.
Can you please tell me what to do?
psild said:
I have a Doogee Collo DG100.
I have tried to flash a new ROM but at the middle of the process I got an error from SP Flash Tool "BROM ERROR:S_NOT_ENOUGH_STORAGE_SPACE(1011)". Now the phone does not start.
Can you please tell me what to do?
Click to expand...
Click to collapse
I get an error at wi-fi settings NVRAM WARNING: Err = 0x10.
Can anyone tell me what it is?
Tony Speaks said:
Hi,
I don't know if it's because it's all written in Chinese when I get to the page with the actual zip on it or if it's because I'm blind and am missing some important visual cue on the page, but I can't figure out how to download the firmware or how to get the tools. Any advice on this? I even tried looking at the source code to see if there is a direct link to the file, but it's all full of JavaScript.
Incidentally, is there any indication on the site as to whether we might expect a newer version of Android on this phone in the future?
Click to expand...
Click to collapse
I use Chrome which seems to auto-translate and gives me a Chinglish version of the screens, which makes it a lot easier.
I assume you got to the pan.baidu download site? If so, in the middle of the screen there is an icon that looks a bit like a suitcase. Above and to the right there are two rectangular buttons, one blue and the other unfilled. Click the unfilled one. A popup window will appear with another two rectangular buttons at the top, one blue and one unfilled. Again click the unfilled one. That should start the download.
This site has a list of the latest downloads: http://www.doogee.cc/en/gb/xiazai.asp - I'm currently running DG100-0917 and about to try DG100-1101
Hope that helps.
---------- Post added at 01:16 PM ---------- Previous post was at 01:03 PM ----------
rci_canada said:
I've done the extact same thing however I am not able to download twitter, whatsapp, skype or facebook after uninstalling and reinstalling in Play Store. The message I receive is the software is not digitally signed. The camera sucks really bad after doing the latest firmware upgrade. Is it me or am I missing something in the process ?
Click to expand...
Click to collapse
What's the exact wording of the message(s) you get? I recall I had some difficulty with this and googled how to overcome it, including deleting incorrect application IDs and certificates from one of the Android files - sorry, I can't now remember exactly what steps I followed but if you can post the exact message I'll try to help.
I don't think I was able to get Facebook to update from Play, no matter what I did. I think I read somewhere that this might be to do with one of the themes that Doogee / Mediatek use being incompatible with later versions of Facebook.
Anyway, please post the message(s) and I'll see what I can do.
Cheers.
DG100-1101 breaks WiFi
I installed the latest firmware, DG100-1101 but unfortunately Wi Fi and Bluetooth don't work, and when I reverted to DG100-0927 I get an odd entry in WiFi settings NVRAM WARNING Err = 0x10. Everything else seems OK though.
I would advise NOT upgrading to this version and if anyone finds a fix for the Wi Fi issue' please post here, thanks
Hello All,
I have a HP Envy M6 notebook, that the wrong Firmware was flashed onto its Touchpad. Now it does not work. The firmware for this "Synaptics TM2054" is not available (I have contacted both HP and Synaptics).
However, I have access to an identical HP M6 notebook, and I was hoping if someone can help with a tool that can Dump the Touchpad Firmware and ReFlash it?
There is a Synaptics Flashing tool and a Firmware Image File included in the attachment sp65951.rar encapsulated within the sp65951.exe file. Alas, the SynReflash64.exe can only Flash but not Dump and the image file included "PR1522164-tm2251-001_v1.5.img" is for (Synaptics TM2251) a different TouchPad.
However, the Firmware for the TM2054 is included within a Firmware Flashing tool SynapticsReflash.exe (which failed to execute on my Notebook) encapsulated in the SP59628.exe attached.
I really hope some one can help with this problem.
TIA, Simple.
Hi,
I have no solution for you because we have nothing here for your notebook?
Can I suggest to post your request here => Questions and Answers
I will hope that someone can give you some help
I suppose that you have tried to find a solution with "Google search".
Good luck
philos64 said:
Hi,
I have no solution for you because we have nothing here for your notebook?
Can I suggest to post your request here => Questions and Answers
I will hope that someone can give you some help
I suppose that you have tried to find a solution with "Google search".
Good luck
Click to expand...
Click to collapse
Thanks, Done!
I need help to resurrect this autorodio after a failed attempt to update firmware it died if anyone can help with the firmware and how can I do the recovery I'm eternally grateful.
Does your manufacturer provide firmware files you can flash with SP Flash Tool? (I'm assuming your car has a USB port) As it would be the stock firmware, bootloader unlocking shouldn't be an issue.
$cronos_ said:
Does your manufacturer provide firmware files you can flash with SP Flash Tool? (I'm assuming your car has a USB port) As it would be the stock firmware, bootloader unlocking shouldn't be an issue.
Click to expand...
Click to collapse
Good night friend, the problem is that I have already contacted the seller several times and I have not received an answer. a question if I have a backup of another device like it, can I resurrect the other one? The SP flash tool works with these autoresponders. Thank you
Good morning I need help I bought this autorodio with 6 gigs of ram and 128 of rom as shown in the photo I tried to install the gps program with 25 gigs and it tells me it has no disk space. I downloaded the cpu x app and it shows these values will be that is correct? Thank you
epidoral said:
Good night friend, the problem is that I have already contacted the seller several times and I have not received an answer. a question if I have a backup of another device like it, can I resurrect the other one? The SP flash tool works with these autoresponders. Thank you
View attachment 5606077
Click to expand...
Click to collapse
If the other device works fine, then, yes, you can copy the flash to your car radio thing
Not Android Automotive OS, requested moderator move to Android Head-Units forum.
marchnz said:
Not Android Automotive OS, requested moderator move to Android Head-Units forum.
Click to expand...
Click to collapse
At least this is a FYT unit, so the thread should be moved to "FYT Android Head Units"...
epidoral said:
I need help to resurrect this autorodio after a failed attempt to update firmware it died if anyone can help with the firmware and how can I do the recovery I'm eternally grateful.
Click to expand...
Click to collapse
By now this topic is already a bit older.
Which firmware did you use to flash your unit?
I see you have one of those 1280x640 units. Mostly these require some specific tweaks due to their different screen shape.
And looking at your first image: it seems like a very long portrait photo. Is that of your unit but then sideways?
I assume in that case that you need to modify the
Code:
ro.sf.swrotation=xy
(values 0, 90, 180, 270) .
This could even be done with an empty flash image only using a config.txt with the correct value.
And please: don't start a topic with only "help". That is the most stupid title to start a topic with and does not give anyone a clue whether they can help you or not.. Please edit your first post and create a more meaningful title.
epidoral said:
Good morning I need help I bought this autorodio with 6 gigs of ram and 128 of rom as shown in the photo I tried to install the gps program with 25 gigs and it tells me it has no disk space. I downloaded the cpu x app and it shows these values will be that is correct? Thank you
Click to expand...
Click to collapse
You were misled.
Your unit is NOT a 6/128, it's a 3/32