Does anyone know if there TF300TG Kernel for KitKat
AVIMPEG said:
Does anyone know if there TF300TG Kernel for KitKat
Click to expand...
Click to collapse
Actually, all kitkat builds work on tf300tg with no support for 3g.
zlazaar said:
Actually, all kitkat builds work on tf300tg with no support for 3g.
Click to expand...
Click to collapse
So they support only tf300t
not tf300tg
I asked about tf300tg With 3g
Related
Hi,
I just want to publish JB stock kernel for TF300TG with modem part writen by myself from zero.
I'm usind this kernel for a while and have no problems with 3G hangs, network lost stuff, etc.
ACM (AT control channel), POWER CONTROL and RAW IP NETWORK writen from zero.
Other code (RIL part and BASEBAND CHR for FW update) was not changed (bugfix only).
Installer can be found^
https://dl.dropbox.com/u/90185166/TF300TG-andrewz1-v3.zip
This is a plain stock kernel!
I hope when you share source code, developers will better support model t300tg. And I hope in the future to see a little overclocked version of the kernel. : P
Thanks again andrew_z1 for support kernel. Kernel version v3 is very stable.
Thank you for sharing. Hope this gets a working kernel for CM / AOSP based Roms as well.
Working flawlessy. It is a breathe, to find a person who supports 3g version of a tablet.
Maybe you could collaborate with other developers to widen support of TF300TG model.
Thanks a lot.
Sent from my ASUS Transformer Pad TF300TG using Tapatalk HD
alarien said:
Working flawlessy. It is a breathe, to find a person who supports 3g version of a tablet.
Maybe you could collaborate with other developers to widen support of TF300TG model.
Thanks a lot.
Sent from my ASUS Transformer Pad TF300TG using Tapatalk HD
Click to expand...
Click to collapse
maybe working with CM would be a great option?
Blubberor said:
maybe working with CM would be a great option?
Click to expand...
Click to collapse
It's all depends on the developer. As for me, it would be great.
Sent from my ASUS Transformer Pad TF300TG using Tapatalk 2
alarien said:
It's all depends on the developer. As for me, it would be great.
Sent from my ASUS Transformer Pad TF300TG using Tapatalk 2
Click to expand...
Click to collapse
Great thanks!
I have the tf300tl LTE and im stuck with the stock kernel and the poor I/O performance
Is it possible to implement the 3G changes you announced in Untermensch kernel for example,
my dream is to have a kernel with good I/O performance and working 3g!!
thanks!
Can you please share the source code for this? With no great devs around to do stuff for the TG, it's left to each one of us to dabble a bit and see what we can do
Thanks
Do you mind if I include this in my kernel installer for CleanROM Inheritance?
sbdags said:
...include this in my kernel installer for CleanROM Inheritance?
Click to expand...
Click to collapse
Great idea!
andrew_z1 said:
Hi,
I just want to publish JB stock kernel for TF300TG with modem part writen by myself from zero.
I'm usind this kernel for a while and have no problems with 3G hangs, network lost stuff, etc.
ACM (AT control channel), POWER CONTROL and RAW IP NETWORK writen from zero.
Other code (RIL part and BASEBAND CHR for FW update) was not changed (bugfix only).
Installer can be found^
https://dl.dropbox.com/u/90185166/TF300TG-andrewz1-v3.zip
This is a plain stock kernel!
Click to expand...
Click to collapse
Million thanks for this kernel :good:. I installed it with CleanROM Inheritance 3.4.4 on my TF300L. It works really fine with 3G. I'm not convinced about LTE, but unfortunately I do not have an LTE subscription yet. According to SpeedTest it works fine at around 10Mbps, which is the bandwidth I pay for currently.
Do you think you can make OC available in this kernel?
Does this kernel work on last cm tf300t, using a tf300tg device?
lusilvarol said:
Does this kernel work on last cm tf300t, using a tf300tg device?
Click to expand...
Click to collapse
I doubt it as it is a stock kernel.
Can I use this kernel with the the stock ROM? I didn't switch to any custom ROM yet.
Edit: I guess sbdags already answered my question
hello guys, I read this thread: http://forum.xda-developers.com/showthread.php?t=1884405 but is very old. so I would flash any tf300t rom with JB on tf300tg... is possible ???, I read in the link above that is possible only if I flash the TWP recovery end not CWM... is correct ??? thanks for your attention !!!
Uppppppp
Inviato dal mio Galaxy Nexus con Tapatalk 2
Hi,
I also have a TF300TG and I really don´t know which custom ROM can be used with my Tab and which not.
So I´m also very intersting in this topic and it would be very helpful if someone can answer the question.
Thanks
CleanROM Inheritance supports the TF300TG
Just install the kernel installer directly after the ROM and choose the tg series kernels. Both are in my original thread.:good:
sbdags said:
CleanROM Inheritance supports the TF300TG
Just install the kernel installer directly after the ROM and choose the tg series kernels. Both are in my original thread.:good:
Click to expand...
Click to collapse
Does your kernel work with any rom?
Sent from my Nexus 4 using Tapatalk
spider623 said:
Does your kernel work with any rom?
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
If they are stock based and on the same jb level yes.
when I go to recovery, I see this in the photo on my tf300tg with tf300t rom. how is possible to resolve ???
Which ROM / Bootloader have you flashed? Hopefully not 10.6.1.8 based 4.2.1 ......
There is only one version of TWRP compatible right now.
R: problem cwm with tf300T rom on tf300tg
sbdags said:
Which ROM / Bootloader have you flashed? Hopefully not 10.6.1.8 based 4.2.1 ......
There is only one version of TWRP compatible right now.
Click to expand...
Click to collapse
I istalled the rom 4.2.2 of tf300t on rom 4.1.1 of tf300tg
Inviato dal mio Galaxy Nexus con Tapatalk 2
need help, please. tell me if there is an online retailer in the USA selling transformer pad infinity 3g or lte, other than the WiFi ones widely available.
I don't think so. Don't recall a version with data connectivity even being built for the Infinity.
Sent from my SPH-L710 using Tapatalk 2
kuukoo said:
need help, please. tell me if there is an online retailer in the USA selling transformer pad infinity 3g or lte, other than the WiFi ones widely available.
Click to expand...
Click to collapse
legendary1022 said:
I don't think so. Don't recall a version with data connectivity even being built for the Infinity.
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
Legendary is right, they did not make a 3g version of the TF700, they did make one of the TF300 though.
Tylor
Sent from my ASUS Transformer Pad TF700T using Tapatalk HD
ROM: CleanRom Xenogenesis 4.4.1 DeOdex
Kernel: Hundsbuah's V3.0.5 OC Kernel
Theme: Timberwolf's Blues and Jazz Theme
Tylorw1 said:
Legendary is right, they did not make a 3g version of the TF700
Click to expand...
Click to collapse
You mean, the TF700KL doesn't exist?
https://www.asus.com/Tablets_Mobile/ASUS_Transformer_Pad_Infinity_TF700KL
_that said:
You mean, the TF700KL doesn't exist?
https://www.asus.com/Tablets_Mobile/ASUS_Transformer_Pad_Infinity_TF700KL
Click to expand...
Click to collapse
I thought the KL was a totally different tablet then the TF700, just same naming, owell.
Tylor
Sent from my ASUS Transformer Pad TF700T using Tapatalk HD
ROM: CleanRom Xenogenesis 4.4.1 DeOdex
Kernel: Hundsbuah's V3.0.5 OC Kernel
Theme: Timberwolf's Blues and Jazz Theme
Tylorw1 said:
I thought the KL was a totally different tablet then the TF700, just same naming, owell.
Click to expand...
Click to collapse
It has a totally different SoC, making it incompatible with TF700T kernels and ROMs, but the case and display are identical or at least very similar.
Title kind of says it all, I have heard of folks in a few posts for 4.3 based roms mention just running a kernel with Data2SD built in. Bryce's kernel is the only 4.3 kernel i have found and it does not appear to have data2sd included....
4.3 runs pretty well without it but it would be nice to have.
Sent from my ASUS Transformer Pad TF700T using Tapatalk 4
sjgieson said:
Title kind of says it all, I have heard of folks in a few posts for 4.3 based roms mention just running a kernel with Data2SD built in. Bryce's kernel is the only 4.3 kernel i have found and it does not appear to have data2sd included....
4.3 runs pretty well without it but it would be nice to have.
Sent from my ASUS Transformer Pad TF700T using Tapatalk 4
Click to expand...
Click to collapse
That's kernel version 6 kind of supports 4.3 and has preinit support built in which means with a small script you can set the mount points for data2sd before android boots.
Pop over to his thread for info.
sbdags said:
That's kernel version 6 kind of supports 4.3 and has preinit support built in which means with a small script you can set the mount points for data2sd before android boots.
Pop over to his thread for info.
Click to expand...
Click to collapse
Thanks for the reply, as far as I know that will not work on 4.3: From that thread:
Originally Posted by stalls View Post
Is this compatible with 4.3?
No this kernel is only for stock based roms, it will not work on CM 10.2 (currently there's no custom kernel for CM10.2).
sjgieson said:
Thanks for the reply, as far as I know that will not work on 4.3: From that thread:
Originally Posted by stalls View Post
Is this compatible with 4.3?
No this kernel is only for stock based roms, it will not work on CM 10.2 (currently there's no custom kernel for CM10.2).
Click to expand...
Click to collapse
I used it on CM10.2 as did that. The new version is 4.3 compatible as it says in the changelog. Although he didin't put it in the first post it is near the end of the thread. You also need to inject his modules into CM.
If you pop over to his dual boot thread he shows you how to do this as well
Awesome thanks for posting again! I will give this a try right away! I'd seriously contemplating going down the path of compiling my own....but would rather not
Sent from my ASUS Transformer Pad TF700T using Tapatalk 4
Well I just tried that6 and it booted but phone app crashed dialog prevented using it…..I am running CMB so maybe vanilla cm10.2 would work…....
Sent from my ASUS Transformer Pad TF700T using Tapatalk 4
sjgieson said:
Well I just tried that6 and it booted but phone app crashed dialog prevented using it…..I am running CMB so maybe vanilla cm10.2 would work…....
Sent from my ASUS Transformer Pad TF700T using Tapatalk 4
Click to expand...
Click to collapse
I tried cmb and it worked fine. See instructions.
http://forum.xda-developers.com/showthread.php?t=2501129
True Story, I missed the step about the ramdisk for sure! I fail.
Will try again tonight.