hello guys, I read this thread: http://forum.xda-developers.com/showthread.php?t=1884405 but is very old. so I would flash any tf300t rom with JB on tf300tg... is possible ???, I read in the link above that is possible only if I flash the TWP recovery end not CWM... is correct ??? thanks for your attention !!!
Uppppppp
Inviato dal mio Galaxy Nexus con Tapatalk 2
Hi,
I also have a TF300TG and I really don´t know which custom ROM can be used with my Tab and which not.
So I´m also very intersting in this topic and it would be very helpful if someone can answer the question.
Thanks
CleanROM Inheritance supports the TF300TG
Just install the kernel installer directly after the ROM and choose the tg series kernels. Both are in my original thread.:good:
sbdags said:
CleanROM Inheritance supports the TF300TG
Just install the kernel installer directly after the ROM and choose the tg series kernels. Both are in my original thread.:good:
Click to expand...
Click to collapse
Does your kernel work with any rom?
Sent from my Nexus 4 using Tapatalk
spider623 said:
Does your kernel work with any rom?
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
If they are stock based and on the same jb level yes.
Related
Hello everyone,
I 'looking for a kernel that is compatible with the stock rom and that we can overclock.
know if we can find it?
thanks
Hi,
Test that there [Kernel][CM10] CMOC10-Kernel [150-1380mhz] [384mhz GPU] or
[KERNEL][ROOT][STOCK] GT-P5100 / GT-P5110 compatible!!! :good:
Zelandonii said:
Hi,
Test that there [Kernel][CM10] CMOC10-Kernel [150-1380mhz] [384mhz GPU] or
[KERNEL][ROOT][STOCK] GT-P5100 / GT-P5110 compatible!!! :good:
Click to expand...
Click to collapse
if I know the first kernel is only for cm10 the second is not for overclocking.
There is a third kernel, MetalliKernel 10.1 cm9. But its only for cm9.
Sent from my GT-P5100 using XDA Premium HD app
So there is no kernel that goes on the stock rom that you can overclock?
Inviato dal mio GT-I9300 con Tapatalk 2
Questions should be asked in Q&A forums, not Development forums.
Thread moved.
lorefly said:
So there is no kernel that goes on the stock rom that you can overclock?
Inviato dal mio GT-I9300 con Tapatalk 2
Click to expand...
Click to collapse
No. Sadly this tablet does not have the best developer support.
Sent from my GT-P5110 using Tapatalk 2
lorefly said:
Hello everyone,
I 'looking for a kernel that is compatible with the stock rom and that we can overclock.
know if we can find it?
thanks
Click to expand...
Click to collapse
you can overclock the stock kernel,
just root it, and modify the (cpu frequency scaling) script using text editor with root access
Rotundjere said:
you can overclock the stock kernel,
just root it, and modify the (cpu frequency scaling) script using text editor with root access
Click to expand...
Click to collapse
I would like to see more details about how I do that...
for example:
which text editor?
and more...
Maybe use setcpu?
I'm going to give it a try and report back, but probably need OC kernel
Thought I found a kernel to OC stock rooted but not working for me. Will not boot with new kernel.
Guys i have two question..Whats the difference between All other ROMs and Custom IO control (CM tweak)
links from https://docs.google.com/spreadsheet/ccc?key=0AntDDKv-lS6IdEt6NWVkX01vNmpfbEh4MHo4eDRCbXc#gid=0
And the second one is to flash the kernel i must first flash kernel and then the rom or first the rom and then the kernel??Thnx
Cm tweak is for cm based ROMs, all others is for, well, all others. Flash kernel after flashing ROM.
Sent from my ns4g using Tapatalk 2
p1gp3n said:
Cm tweak is for cm based ROMs, all others is for, well, all others. Flash kernel after flashing ROM.
Sent from my ns4g using Tapatalk 2
Click to expand...
Click to collapse
How i will find which roms are CM based?
Read the thread about the ROM you are interested in. If I'm not familiar with a ROM, i generally read the first page and the last few pages. That way I see what the dev says about it, and see more recent reviews/comments about the current version
Sent from my ns4g using Tapatalk 2
Guys i flash marmite 7.3.1 kernel but from NSTOOLS i cant change cpu governor...Says not availbale...do u know why?thnx
keymaster123 said:
Guys i flash marmite 7.3.1 kernel but from NSTOOLS i cant change cpu governor...Says not availbale...do u know why?thnx
Click to expand...
Click to collapse
go to recovery ->advance->fix permission
keymaster123 said:
How i will find which roms are CM based?
Click to expand...
Click to collapse
U can go to setting-->about rom and read the information of your rom
when I go to recovery, I see this in the photo on my tf300tg with tf300t rom. how is possible to resolve ???
Which ROM / Bootloader have you flashed? Hopefully not 10.6.1.8 based 4.2.1 ......
There is only one version of TWRP compatible right now.
R: problem cwm with tf300T rom on tf300tg
sbdags said:
Which ROM / Bootloader have you flashed? Hopefully not 10.6.1.8 based 4.2.1 ......
There is only one version of TWRP compatible right now.
Click to expand...
Click to collapse
I istalled the rom 4.2.2 of tf300t on rom 4.1.1 of tf300tg
Inviato dal mio Galaxy Nexus con Tapatalk 2
Which kernels there are for jb?
1qasdfghj said:
Which kernels there are for jb?
Click to expand...
Click to collapse
If you're on ViperS or Revealation then there is only SebestianFM kernel which is compatible and it's already included in ROM
Sent from my HTC Sensation Z710e
Currently there are no off Rom kernel for jb, the one that comes with the jb Rom I the only jb kernel u can use
Sent from my HTCSensation using Tapatalk 4
Harbir said:
Currently there are no off Rom kernel for jb, the one that comes with the jb Rom I the only jb kernel u can use
Sent from my HTCSensation using Tapatalk 4
Click to expand...
Click to collapse
I am also trying to find JB kernel with OTG support, but I am pulling my hair out, I tries to install Sultan's kernel for about 20 times and wi-fi is not working at all, OTG of course doesnt work.
FM kernel with Vipers ROM is the only way I can have OTG I think.
dejson said:
I am also trying to find JB kernel with OTG support, but I am pulling my hair out, I tries to install Sultan's kernel for about 20 times and wi-fi is not working at all, OTG of course doesnt work.
FM kernel with Vipers ROM is the only way I can have OTG I think.
Click to expand...
Click to collapse
Fm kernel supports otg I think try it and also let me know
Sent from my HTCSensation using Tapatalk 4
Title kind of says it all, I have heard of folks in a few posts for 4.3 based roms mention just running a kernel with Data2SD built in. Bryce's kernel is the only 4.3 kernel i have found and it does not appear to have data2sd included....
4.3 runs pretty well without it but it would be nice to have.
Sent from my ASUS Transformer Pad TF700T using Tapatalk 4
sjgieson said:
Title kind of says it all, I have heard of folks in a few posts for 4.3 based roms mention just running a kernel with Data2SD built in. Bryce's kernel is the only 4.3 kernel i have found and it does not appear to have data2sd included....
4.3 runs pretty well without it but it would be nice to have.
Sent from my ASUS Transformer Pad TF700T using Tapatalk 4
Click to expand...
Click to collapse
That's kernel version 6 kind of supports 4.3 and has preinit support built in which means with a small script you can set the mount points for data2sd before android boots.
Pop over to his thread for info.
sbdags said:
That's kernel version 6 kind of supports 4.3 and has preinit support built in which means with a small script you can set the mount points for data2sd before android boots.
Pop over to his thread for info.
Click to expand...
Click to collapse
Thanks for the reply, as far as I know that will not work on 4.3: From that thread:
Originally Posted by stalls View Post
Is this compatible with 4.3?
No this kernel is only for stock based roms, it will not work on CM 10.2 (currently there's no custom kernel for CM10.2).
sjgieson said:
Thanks for the reply, as far as I know that will not work on 4.3: From that thread:
Originally Posted by stalls View Post
Is this compatible with 4.3?
No this kernel is only for stock based roms, it will not work on CM 10.2 (currently there's no custom kernel for CM10.2).
Click to expand...
Click to collapse
I used it on CM10.2 as did that. The new version is 4.3 compatible as it says in the changelog. Although he didin't put it in the first post it is near the end of the thread. You also need to inject his modules into CM.
If you pop over to his dual boot thread he shows you how to do this as well
Awesome thanks for posting again! I will give this a try right away! I'd seriously contemplating going down the path of compiling my own....but would rather not
Sent from my ASUS Transformer Pad TF700T using Tapatalk 4
Well I just tried that6 and it booted but phone app crashed dialog prevented using it…..I am running CMB so maybe vanilla cm10.2 would work…....
Sent from my ASUS Transformer Pad TF700T using Tapatalk 4
sjgieson said:
Well I just tried that6 and it booted but phone app crashed dialog prevented using it…..I am running CMB so maybe vanilla cm10.2 would work…....
Sent from my ASUS Transformer Pad TF700T using Tapatalk 4
Click to expand...
Click to collapse
I tried cmb and it worked fine. See instructions.
http://forum.xda-developers.com/showthread.php?t=2501129
True Story, I missed the step about the ramdisk for sure! I fail.
Will try again tonight.