Database Info

[Q] TF101G recovery and custom rom

Hi to all, i've rooted my tf101g (b90) with nacho method.
which recovery is work good for my device? I see only recovery for tf101 but not for tf101G.
The same problem with custom rom.
The recovery and custom rom for tf101, work with my tf101g? I dont need 3g inside the device.
Anyone can explain me which recovery and custom rom work for my device?
Tnks in advance. (Sorry for my bad english) and the noob questions.

Ok, for the recovery i've installed the rouge 1.3.0 (cwm based) recovery with a simpli app. And the recovery work correct (i've used the search button correctly)
But i need a custom rom compatibility list for 101G. Please

Revolver has 3g zip file you flash after the rom i would read the op for revolver its a nice rom imo
Sent from my DROID RAZR using Tapatalk 2

Most roms have 3g cooked in now, and as far as recovery tf101 and tf101G are compatible. My recovery preference is the Rouge XM recovery, since it reads internal and external SD card. As far as ROMS, just make sure it supports 3G (like said, most do) I recommend ARHD or Revolver if you like the stock rom, and Megatron or AOKP if you like cm9/aosp roms.

Thing O Doom said:
Most roms have 3g cooked in now, and as far as recovery tf101 and tf101G are compatible. My recovery preference is the Rouge XM recovery, since it reads internal and external SD card. As far as ROMS, just make sure it supports 3G (like said, most do) I recommend ARHD or Revolver if you like the stock rom, and Megatron or AOKP if you like cm9/aosp roms.
Click to expand...
Click to collapse
I've downloaded revolver and megatron last roms (i'm search now for wowking kernels without bug).
If i try flash a custom rom without 3g, the tablet work? I dont use 3g because i use the tablet indoor and i have wifi always on!
I'm curious to try new roms.. I need overclock and max compatibility with games!

The tablet will work without 3g just fine, but 3g should work anyway on most roms.
The most stable kernel for me is the TestyMehIcs kernel,
I also had great stability with Guevor's 17c kernel, and his 19.3 kernel.
Both can overclock to around 1.6Ghz.

Thing O Doom said:
The tablet will work without 3g just fine, but 3g should work anyway on most roms.
The most stable kernel for me is the TestyMehIcs kernel,
I also had great stability with Guevor's 17c kernel, and his 19.3 kernel.
Both can overclock to around 1.6Ghz.
Click to expand...
Click to collapse
1.6 is very good! But the battery drain is very aggressive i think. Or not?!?

which firmware version?
beccio said:
Hi to all, i've rooted my tf101g (b90) with nacho method. [\QUOTE]
Which firmware version do you have? Is it 9.2.2.4?
Thanks
Click to expand...
Click to collapse

rob54321 said:
beccio said:
Hi to all, i've rooted my tf101g (b90) with nacho method. [\QUOTE]
Which firmware version do you have? Is it 9.2.2.4?
Thanks
Click to expand...
Click to collapse
No, my firmware version is different but with nacho is possible root al devices i think
Click to expand...
Click to collapse

Hi nancho root does not work with firmware 9.2.2.4 on the Asus TF101G. Neither does viperboy ( which is just a script for nacho root). I think the only way to root mine is to downgrade to an earlier version of firmware.
I suppose Asus keeps changing the firmware to block the new rooting methods.
I am a linux developer so I will try and figure something out.
Thanks,
rob

rob54321 said:
Hi nancho root does not work with firmware 9.2.2.4 on the Asus TF101G. Neither does viperboy ( which is just a script for nacho root). I think the only way to root mine is to downgrade to an earlier version of firmware.
I suppose Asus keeps changing the firmware to block the new rooting methods.
I am a linux developer so I will try and figure something out.
Thanks,
rob
Click to expand...
Click to collapse
I'm on 9.2.2.6, also a TF101G B90 running rooted stock 4.0.3 and would love to use the multi-user feature of 4.2. Which "stable" ROM is the closest to stock?

therealWilmy said:
I'm on 9.2.2.6, also a TF101G B90 running rooted stock 4.0.3 and would love to use the multi-user feature of 4.2. Which "stable" ROM is the closest to stock?
Click to expand...
Click to collapse
I'd say Android Revolution HD or Revolver, I have no idea if either are still supported though, or if any stock based roms have updated to JB.

therealWilmy said:
I'm on 9.2.2.6, also a TF101G B90 running rooted stock 4.0.3 and would love to use the multi-user feature of 4.2. Which "stable" ROM is the closest to stock?
Click to expand...
Click to collapse
If you want multi-user, you will have to deviate from stock. The stock ROM (and ARHD/Revolver) are still on ICS 4.0.3.
IMO, TeamEOS 4 is quite stable. It is 4.2.2 and I beleive with PPP Widget you can use the 3G functionality to some degree, but not the same as stock. Part of the reason this is not working perfectly in JB is because the stock ROM for the TF101G never went to JB (nor did the TF101).

Hi
If I rooted my TF101G with [TOOL]"1-Click Transformer Root"-Root/Unroot/cwm/stock rec-TF101(G)/201/300T(G)/SL101 and install Rouge recovery can i flash my pad with Android Revolution HD ?

how to use rom for tf300t on tf300tg ???

hello guys, I read this thread: http://forum.xda-developers.com/showthread.php?t=1884405 but is very old. so I would flash any tf300t rom with JB on tf300tg... is possible ???, I read in the link above that is possible only if I flash the TWP recovery end not CWM... is correct ??? thanks for your attention !!!

Uppppppp
Inviato dal mio Galaxy Nexus con Tapatalk 2

Hi,
I also have a TF300TG and I really don´t know which custom ROM can be used with my Tab and which not.
So I´m also very intersting in this topic and it would be very helpful if someone can answer the question.
Thanks

CleanROM Inheritance supports the TF300TG
Just install the kernel installer directly after the ROM and choose the tg series kernels. Both are in my original thread.:good:

sbdags said:
CleanROM Inheritance supports the TF300TG
Just install the kernel installer directly after the ROM and choose the tg series kernels. Both are in my original thread.:good:
Click to expand...
Click to collapse
Does your kernel work with any rom?
Sent from my Nexus 4 using Tapatalk

spider623 said:
Does your kernel work with any rom?
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
If they are stock based and on the same jb level yes.

Bluetooth mouse don't work on TF700T

Hi everyone..that's my first post on xda...so nice to meet you :beer:
My bluetooth mouse works fine with my Samsung GalaxyNexus with custom rom AOKP but don't work on Asus transformer infinity TF700t with clemsyn kernel 3.1.10 and CleanROM inheritance 3.2
anyone have an idea about it? :what:
Inviato dal mio ASUS Transformer Pad TF700T con Tapatalk 2

nicobottens said:
Hi everyone..that's my first post on xda...so nice to meet you :beer:
My Bluetooth mouse works fine with my Samsung Galaxy Nexus with custom ROM AOKP but don't work on Asus transformer infinity TF700t with clemsyn kernel 3.1.10 and CleanROM inheritance 3.2
Anyone have an idea about it? :what:
Click to expand...
Click to collapse
Sorry for the obvious ... Bluetooth is enabled on your tab am I correct?
I run Clemsyns and CROMi with a Bluetooth keyboard and the tablet is seeing it.

I use a Bluetooth mouse on mine without any problems...

R: Bluetooth mouse don't work on TF700T
yes..the blouetooth is enabled and match correctly with bluetooth mouse, but i can't see the mouse arrow! ..it's so strange!! why they match with correct code (0000) and don't work!?
you know if i can do some test about it?
Inviato dal mio ASUS Transformer Pad TF700T con Tapatalk 2

nicobottens said:
Hi everyone..that's my first post on xda...so nice to meet you :beer:
My bluetooth mouse works fine with my Samsung GalaxyNexus with custom rom AOKP but don't work on Asus transformer infinity TF700t with clemsyn kernel 3.1.10 and CleanROM inheritance 3.2
anyone have an idea about it? :what:
Inviato dal mio ASUS Transformer Pad TF700T con Tapatalk 2
Click to expand...
Click to collapse
working fine here on the same Kernel and Rom

R: Bluetooth mouse don't work on TF700T
thannks..i've to try with another mouse! strange but true!! ok on galaxy nexus and don't work on tf700!! bah :banghead: hi to everyone
Inviato dal mio ASUS Transformer Pad TF700T con Tapatalk 2

[Q] 4.3 Kernel w/ Data2SD support?

Title kind of says it all, I have heard of folks in a few posts for 4.3 based roms mention just running a kernel with Data2SD built in. Bryce's kernel is the only 4.3 kernel i have found and it does not appear to have data2sd included....
4.3 runs pretty well without it but it would be nice to have.
Sent from my ASUS Transformer Pad TF700T using Tapatalk 4

sjgieson said:
Title kind of says it all, I have heard of folks in a few posts for 4.3 based roms mention just running a kernel with Data2SD built in. Bryce's kernel is the only 4.3 kernel i have found and it does not appear to have data2sd included....
4.3 runs pretty well without it but it would be nice to have.
Sent from my ASUS Transformer Pad TF700T using Tapatalk 4
Click to expand...
Click to collapse
That's kernel version 6 kind of supports 4.3 and has preinit support built in which means with a small script you can set the mount points for data2sd before android boots.
Pop over to his thread for info.

sbdags said:
That's kernel version 6 kind of supports 4.3 and has preinit support built in which means with a small script you can set the mount points for data2sd before android boots.
Pop over to his thread for info.
Click to expand...
Click to collapse
Thanks for the reply, as far as I know that will not work on 4.3: From that thread:
Originally Posted by stalls View Post
Is this compatible with 4.3?
No this kernel is only for stock based roms, it will not work on CM 10.2 (currently there's no custom kernel for CM10.2).

sjgieson said:
Thanks for the reply, as far as I know that will not work on 4.3: From that thread:
Originally Posted by stalls View Post
Is this compatible with 4.3?
No this kernel is only for stock based roms, it will not work on CM 10.2 (currently there's no custom kernel for CM10.2).
Click to expand...
Click to collapse
I used it on CM10.2 as did that. The new version is 4.3 compatible as it says in the changelog. Although he didin't put it in the first post it is near the end of the thread. You also need to inject his modules into CM.
If you pop over to his dual boot thread he shows you how to do this as well

Awesome thanks for posting again! I will give this a try right away! I'd seriously contemplating going down the path of compiling my own....but would rather not
Sent from my ASUS Transformer Pad TF700T using Tapatalk 4

Well I just tried that6 and it booted but phone app crashed dialog prevented using it…..I am running CMB so maybe vanilla cm10.2 would work…....
Sent from my ASUS Transformer Pad TF700T using Tapatalk 4

sjgieson said:
Well I just tried that6 and it booted but phone app crashed dialog prevented using it…..I am running CMB so maybe vanilla cm10.2 would work…....
Sent from my ASUS Transformer Pad TF700T using Tapatalk 4
Click to expand...
Click to collapse
I tried cmb and it worked fine. See instructions.
http://forum.xda-developers.com/showthread.php?t=2501129

True Story, I missed the step about the ramdisk for sure! I fail.
Will try again tonight.

[Q] TF300TG Kernel for KitKat

Does anyone know if there TF300TG Kernel for KitKat

AVIMPEG said:
Does anyone know if there TF300TG Kernel for KitKat
Click to expand...
Click to collapse
Actually, all kitkat builds work on tf300tg with no support for 3g.

zlazaar said:
Actually, all kitkat builds work on tf300tg with no support for 3g.
Click to expand...
Click to collapse
So they support only tf300t
not tf300tg
I asked about tf300tg With 3g