Database Info

[Q] TF101G recovery and custom rom

Hi to all, i've rooted my tf101g (b90) with nacho method.
which recovery is work good for my device? I see only recovery for tf101 but not for tf101G.
The same problem with custom rom.
The recovery and custom rom for tf101, work with my tf101g? I dont need 3g inside the device.
Anyone can explain me which recovery and custom rom work for my device?
Tnks in advance. (Sorry for my bad english) and the noob questions.

Ok, for the recovery i've installed the rouge 1.3.0 (cwm based) recovery with a simpli app. And the recovery work correct (i've used the search button correctly)
But i need a custom rom compatibility list for 101G. Please

Revolver has 3g zip file you flash after the rom i would read the op for revolver its a nice rom imo
Sent from my DROID RAZR using Tapatalk 2

Most roms have 3g cooked in now, and as far as recovery tf101 and tf101G are compatible. My recovery preference is the Rouge XM recovery, since it reads internal and external SD card. As far as ROMS, just make sure it supports 3G (like said, most do) I recommend ARHD or Revolver if you like the stock rom, and Megatron or AOKP if you like cm9/aosp roms.

Thing O Doom said:
Most roms have 3g cooked in now, and as far as recovery tf101 and tf101G are compatible. My recovery preference is the Rouge XM recovery, since it reads internal and external SD card. As far as ROMS, just make sure it supports 3G (like said, most do) I recommend ARHD or Revolver if you like the stock rom, and Megatron or AOKP if you like cm9/aosp roms.
Click to expand...
Click to collapse
I've downloaded revolver and megatron last roms (i'm search now for wowking kernels without bug).
If i try flash a custom rom without 3g, the tablet work? I dont use 3g because i use the tablet indoor and i have wifi always on!
I'm curious to try new roms.. I need overclock and max compatibility with games!

The tablet will work without 3g just fine, but 3g should work anyway on most roms.
The most stable kernel for me is the TestyMehIcs kernel,
I also had great stability with Guevor's 17c kernel, and his 19.3 kernel.
Both can overclock to around 1.6Ghz.

Thing O Doom said:
The tablet will work without 3g just fine, but 3g should work anyway on most roms.
The most stable kernel for me is the TestyMehIcs kernel,
I also had great stability with Guevor's 17c kernel, and his 19.3 kernel.
Both can overclock to around 1.6Ghz.
Click to expand...
Click to collapse
1.6 is very good! But the battery drain is very aggressive i think. Or not?!?

which firmware version?
beccio said:
Hi to all, i've rooted my tf101g (b90) with nacho method. [\QUOTE]
Which firmware version do you have? Is it 9.2.2.4?
Thanks
Click to expand...
Click to collapse

rob54321 said:
beccio said:
Hi to all, i've rooted my tf101g (b90) with nacho method. [\QUOTE]
Which firmware version do you have? Is it 9.2.2.4?
Thanks
Click to expand...
Click to collapse
No, my firmware version is different but with nacho is possible root al devices i think
Click to expand...
Click to collapse

Hi nancho root does not work with firmware 9.2.2.4 on the Asus TF101G. Neither does viperboy ( which is just a script for nacho root). I think the only way to root mine is to downgrade to an earlier version of firmware.
I suppose Asus keeps changing the firmware to block the new rooting methods.
I am a linux developer so I will try and figure something out.
Thanks,
rob

rob54321 said:
Hi nancho root does not work with firmware 9.2.2.4 on the Asus TF101G. Neither does viperboy ( which is just a script for nacho root). I think the only way to root mine is to downgrade to an earlier version of firmware.
I suppose Asus keeps changing the firmware to block the new rooting methods.
I am a linux developer so I will try and figure something out.
Thanks,
rob
Click to expand...
Click to collapse
I'm on 9.2.2.6, also a TF101G B90 running rooted stock 4.0.3 and would love to use the multi-user feature of 4.2. Which "stable" ROM is the closest to stock?

therealWilmy said:
I'm on 9.2.2.6, also a TF101G B90 running rooted stock 4.0.3 and would love to use the multi-user feature of 4.2. Which "stable" ROM is the closest to stock?
Click to expand...
Click to collapse
I'd say Android Revolution HD or Revolver, I have no idea if either are still supported though, or if any stock based roms have updated to JB.

therealWilmy said:
I'm on 9.2.2.6, also a TF101G B90 running rooted stock 4.0.3 and would love to use the multi-user feature of 4.2. Which "stable" ROM is the closest to stock?
Click to expand...
Click to collapse
If you want multi-user, you will have to deviate from stock. The stock ROM (and ARHD/Revolver) are still on ICS 4.0.3.
IMO, TeamEOS 4 is quite stable. It is 4.2.2 and I beleive with PPP Widget you can use the 3G functionality to some degree, but not the same as stock. Part of the reason this is not working perfectly in JB is because the stock ROM for the TF101G never went to JB (nor did the TF101).

Hi
If I rooted my TF101G with [TOOL]"1-Click Transformer Root"-Root/Unroot/cwm/stock rec-TF101(G)/201/300T(G)/SL101 and install Rouge recovery can i flash my pad with Android Revolution HD ?

[Questions/Troubleshooting][ROM][OFFICIAL] Cyanogenmod 11 Nightlies

[SIZE=+3]This thread has been created strictly for
Questions & Troubleshooting[/SIZE]
[SIZE=+2]Specific to[/SIZE]
[OFFICIAL] Cyanogenmod 11 Nightlies​
[SIZE=+2]This thread has been created for people to share issues, question and help
while using [OFFICIAL] Cyanogenmod 11 Nightlies​[/SIZE]
[ROM][4.4.2][OFFICIAL] Cyanogenmod 11 Nightlies
PLEASE make sure to thank developer for the dedication to this ROM
*​
Please do not clutter the Development thread with non related development chatter
**** Warning - Please Read Now and Don't Cry Later ****​
Backup your data before you flash this ROM
Please flash the latest Asus bootloader before installing this ROM --> link and details

FAQs
Q:I know that CM10.1 use the Phone UI by default but it's still possible to switch to the Tabled UI?
No.And don't whine to the developer about it (do it with Google ) this won't change.
Q: I want to go back to a Jelly Bean 4.1.1 rom,do i have to downgrade the bootloader?
No,the 4.2.1 bootloader is backwards compatible but it's not recommended to use a 4.1 bootloader with a 4.2.1 rom.
Q: I can't find the Developer Option anymore,it's gone?
It's not gone,just go in Settings --> About Tablet --> Press 7 times on Build Number...done
Q: I can't find the advanced power options anymore (reboot to recovery,bootloader,etc).
You can enable all those options in Settings --> Developer Option --> Advanced Reboot
Q: I enabled all the options in the Power Menu but i still don't have the Advanced Power Menu ( i.e. Reboot to recovery) when pressing the Power button.
Unlock your screen before pressing the Power button,the advanced Power Menu is always disabled from the Lockscreen.
Q:I would like to use the build-in CM Update feature but i'm not using the CWM recovery,can i use TWRP instead?
Yes,TWRP will work just fine.

[Unofficial/Unsupported] CM10.1 Kernels - Tweaks - Mods
[Unofficial/Unsupported] CM10.1 Kernels - Tweaks - Mods​
**** Warning/Disclaimer ****
All the Mods,Kernels,Tweaks provided in this post ARE NOT SUPPORTED by the Official CM10.1 Developer/ CM10.1 Team so please DO NOT post your issues/bugs or requests here.
***** MODS *****​
++++ TabletUI MOD ++++ ---> Original Thread
Install this mode and enjoy the "old" TabletUI.

I'll start. I know the OP was mentioning changing the I/O scheduler setting from ROW to CFQ. Any reason why that would improve performance?
Sent from my ASUS Transformer Pad TF700T using Tapatalk HD

myculito said:
I'll start. I know the OP was mentioning changing the I/O scheduler setting from ROW to CFQ. Any reason why that would improve performance?
Sent from my ASUS Transformer Pad TF700T using Tapatalk HD
Click to expand...
Click to collapse
It seem that Asus did some changes to the CFQ scheduler on the 4.2.1 kernel (don't ask me about tech details) and improved it a bit.But no matter wich scheduler is set by default you are still free to choose the one that suite you best and set it on boot.

Any recommendations on disabling HW overlays, or forcing GPU rendering?
Sent from my ASUS Transformer Pad TF700T using Tapatalk HD

Nevermind on the HW overlays. I've been playing with the I/O settings, and Quadrant seems to like ROW more than CFQ for some reason. I'll run it in the meantime.
Coming from a clean install, you can absolutely notice the kernel performance improvements. I'm a happy camper!
Sent from my ASUS Transformer Pad TF700T using Tapatalk HD

Google Chrome Beta Speed
I'll leave this SPDY bit here
https://plus.google.com/106261148188435264925/posts/NPFQBLxprqp

dasunsrule32 said:
I'll leave this SPDY bit here
https://plus.google.com/106261148188435264925/posts/NPFQBLxprqp
Click to expand...
Click to collapse
I can find the SPYD/3.1 in the list, but can't se the option to enable the data compression proxy. Maybe I have to change the language to English to find it, lol.
Nevertheless the latest nightly is a huge improvement over the previous ones! Good job!
One question though, is it possible to disable fsync in the "stock" CM10.1 kernel? At least for me the disabled fsync on stock ROMs made the tf700 fly.
Sent from my HTC One X using xda app-developers app

Is there a video of this running?

inSaN1Ty_X said:
One question though, is it possible to disable fsync in the "stock" CM10.1 kernel?
Click to expand...
Click to collapse
+1
I'd add to that Data2SD. Both make my TF700 much snappier and benchmarks are consistently improved as well.

cowhow said:
+1
I'd add to that Data2SD. Both make my TF700 much snappier and benchmarks are consistently improved as well.
Click to expand...
Click to collapse
You can't disable Fsync with the default CM10.1 kernel,you will need a custom kernel .As for the Data2SD I'm sure that someone will implement it soon and I will update the OP with all the infos and links.
Sent from my ASUS Transformer Pad TF700T using Tapatalk HD

inSaN1Ty_X said:
I can find the SPYD/3.1 in the list, but can't se the option to enable the data compression proxy. Maybe I have to change the language to English to find it, lol.
Nevertheless the latest nightly is a huge improvement over the previous ones! Good job!
One question though, is it possible to disable fsync in the "stock" CM10.1 kernel? At least for me the disabled fsync on stock ROMs made the tf700 fly.
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
You have to on the latest beta version that was released last night
Sent from my Nexus 4 using xda app-developers app

Guys, is the kernel in this ROM the same as in CROMi-Xenogenesis 4.3 Final][Stock - 10.6.1.14.4 - DEODEX]? I have had that ROM on my device since Tuesday and I'm wondering whether I should try this one as well...

Pretoriano80 said:
It seem that Asus did some changes to the CFQ scheduler on the 4.2.1 kernel (don't ask me about tech details) and improved it a bit.But no matter wich scheduler is set by default you are still free to choose the one that suite you best and set it on boot.
Click to expand...
Click to collapse
I was looking through source today, CFQ didn't seem to change, but there were many changes on the board-cardhu*.c files, including memory locations, etc. This is what is probably allowing CFQ to work more efficiently than in previous iterations of the kernel.

So to install this from CROMI I need to do a full wipe then put this and the correct GAPS then install via TWRP?

KinetiClutch said:
So to install this from CROMI I need to do a full wipe then put this and the correct GAPS then install via TWRP?
Click to expand...
Click to collapse
You can use twrp or cwm. Yes, you need to wipe, ROM and gapps.
If you use cwm, read the warnings about formatting
Sent from my Nexus 4 using xda app-developers app

dasunsrule32 said:
You can use twrp or cwm. Yes, you need to wipe, ROM and gapps.
If you use cwm, read the warnings about formatting
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
In the thread it mentions the bootloader needs to be:
10.6.1.14.1
is this correct? The current bootloader I have is the latest being 10.6.1.14.4 will I still need to change it?

KinetiClutch said:
In the thread it mentions the bootloader needs to be:
10.6.1.14.1
is this correct? The current bootloader I have is the latest being 10.6.1.14.4 will I still need to change it?
Click to expand...
Click to collapse
Or greater
Sent from my Nexus 4 using xda app-developers app

dasunsrule32 said:
Or greater
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Ahh so I'm okay with this bootloader . Thank you
Loving it so far! Very very enjoyable!
Just wondered would Browser to Ram be possible on this?
and also just one thing is it possible to install ASUS App Backup onto this anyway?

[Q] 4.3 Kernel w/ Data2SD support?

Title kind of says it all, I have heard of folks in a few posts for 4.3 based roms mention just running a kernel with Data2SD built in. Bryce's kernel is the only 4.3 kernel i have found and it does not appear to have data2sd included....
4.3 runs pretty well without it but it would be nice to have.
Sent from my ASUS Transformer Pad TF700T using Tapatalk 4

sjgieson said:
Title kind of says it all, I have heard of folks in a few posts for 4.3 based roms mention just running a kernel with Data2SD built in. Bryce's kernel is the only 4.3 kernel i have found and it does not appear to have data2sd included....
4.3 runs pretty well without it but it would be nice to have.
Sent from my ASUS Transformer Pad TF700T using Tapatalk 4
Click to expand...
Click to collapse
That's kernel version 6 kind of supports 4.3 and has preinit support built in which means with a small script you can set the mount points for data2sd before android boots.
Pop over to his thread for info.

sbdags said:
That's kernel version 6 kind of supports 4.3 and has preinit support built in which means with a small script you can set the mount points for data2sd before android boots.
Pop over to his thread for info.
Click to expand...
Click to collapse
Thanks for the reply, as far as I know that will not work on 4.3: From that thread:
Originally Posted by stalls View Post
Is this compatible with 4.3?
No this kernel is only for stock based roms, it will not work on CM 10.2 (currently there's no custom kernel for CM10.2).

sjgieson said:
Thanks for the reply, as far as I know that will not work on 4.3: From that thread:
Originally Posted by stalls View Post
Is this compatible with 4.3?
No this kernel is only for stock based roms, it will not work on CM 10.2 (currently there's no custom kernel for CM10.2).
Click to expand...
Click to collapse
I used it on CM10.2 as did that. The new version is 4.3 compatible as it says in the changelog. Although he didin't put it in the first post it is near the end of the thread. You also need to inject his modules into CM.
If you pop over to his dual boot thread he shows you how to do this as well

Awesome thanks for posting again! I will give this a try right away! I'd seriously contemplating going down the path of compiling my own....but would rather not
Sent from my ASUS Transformer Pad TF700T using Tapatalk 4

Well I just tried that6 and it booted but phone app crashed dialog prevented using it…..I am running CMB so maybe vanilla cm10.2 would work…....
Sent from my ASUS Transformer Pad TF700T using Tapatalk 4

sjgieson said:
Well I just tried that6 and it booted but phone app crashed dialog prevented using it…..I am running CMB so maybe vanilla cm10.2 would work…....
Sent from my ASUS Transformer Pad TF700T using Tapatalk 4
Click to expand...
Click to collapse
I tried cmb and it worked fine. See instructions.
http://forum.xda-developers.com/showthread.php?t=2501129

True Story, I missed the step about the ramdisk for sure! I fail.
Will try again tonight.

[Q] cromi-x and cm11

Hi,
I've been using cromi-x rom for several months (v5.2.3 with kernel thatv7 and fsync off) and it run really fine. I even don't consider to install data2sd or rom2sd as performance already meets my needs due to fsync off.
But i'm a curious man and i'm interested in testing another rom : cm11. But i have few questions about that (i did not find answers in existing threads) :
- does cm11 correct the tf700 i/o issue (with sync off for example) and will i get as good performance than on cromi-x ?
- i have TWRP installed but CM requires CWR. Which one is compatible with both roms (so that i can easily switch back from one rom?to the other) ?
Thanks
Sent from my ASUS Transformer Pad TF700T using xda app-developers app

Ghorin said:
Hi,
I've been using cromi-x rom for several months (v5.2.3 with kernel thatv7 and fsync off) and it run really fine. I even don't consider to install data2sd or rom2sd as performance already meets my needs due to fsync off.
But i'm a curious man and i'm interested in testing another rom : cm11. But i have few questions about that (i did not find answers in existing threads) :
- does cm11 correct the tf700 i/o issue (with sync off for example) and will i get as good performance than on cromi-x ?
Click to expand...
Click to collapse
I doubt it since essentially it is hardware related (cheap memory) and I doubt that the CM team found a better way to mitigate it than sbdags.
- i have TWRP installed but CM requires CWR. Which one is compatible with both roms (so that i can easily switch back from one rom?to the other) ?
Click to expand...
Click to collapse
TWRP 2.6.3.2 also works with CM11. It also seems to work fine with CROMi-X.
sbdgas just modded the rom2sd2 script to run CM11 as rom2sd with _thatv7 on internal. Somebody else tried the same scenario with Hund's kernel - both ran like syrup it seems....
But give it a shot running CM11 on internal with TWRP 2.6.3.2! That's what nandroids are for
And let us know how it went!

berndblb said:
I doubt it since essentially it is hardware related (cheap memory) and I doubt that the CM team found a better way to mitigate it than sbdags.
Click to expand...
Click to collapse
As far as I understand, the solution was to put fsync to off. Maybe CM has also implemented that solution, but I don't find any information about that on CM thread / website.
berndblb said:
TWRP 2.6.3.2 also works with CM11. It also seems to work fine with CROMi-X.
sbdgas just modded the rom2sd2 script to run CM11 as rom2sd with _thatv7 on internal. Somebody else tried the same scenario with Hund's kernel - both ran like syrup it seems....
But give it a shot running CM11 on internal with TWRP 2.6.3.2! That's what nandroids are for
And let us know how it went!
Click to expand...
Click to collapse
Yep you're right, I see that there is a thread explaning that, I will read it and try to apply it. I'll give news about my testing but that will take a few days probably as i'm very busy at the moment at home.

I've read the dual-boot internal+external rom thread and it needs a linux machine which i don't have. Could i do that gparted configuration with a live-linux CD ?
And about performance, does the option "fsync off" exist in CM11 ? If not then i don't expect good performance/no-lag like on CROMI-X and i would be then not interested to test CM.
Sent from my ASUS Transformer Pad TF700T using xda app-developers app

Ghorin said:
I've read the dual-boot internal+external rom thread and it needs a linux machine which i don't have. Could i do that gparted configuration with a live-linux CD ?
Click to expand...
Click to collapse
Sure! I recommend the one from sysresccd.org (should be in every household), but you can also use the GParted live CD or any other that includes gparted.
Ghorin said:
And about performance, does the option "fsync off" exist in CM11 ? If not then i don't expect good performance/no-lag like on CROMI-X and i would be then not interested to test CM.
Click to expand...
Click to collapse
As long as the kernel supports "fsync off", it will also work in CM.

_that said:
Sure! I recommend the one from sysresccd.org (should be in every household), but you can also use the GParted live CD or any other that includes gparted.
As long as the kernel supports "fsync off", it will also work in CM.
Click to expand...
Click to collapse
Thanks for your answer, i'll try it when i have time (late at night when child and wife are sleeping )

Not all kernels that support f sync off support cm11, the only cm11 kernel besides the stock cyanogen mod one is bryce09's and that still has bugs. CM 11 with the build.prop tweaks, clean master, lagfix, and crossbreeder give performance better then CROMI-X with no overclock.
Sent from my ASUS Transformer Pad TF700T using XDA Premium HD app

The Stable ET v2.0 for Cromi X!

Warning: This is the Experimental Tweaks (ET) on hund's kernel v3.4.5 for hardcore users and tinkers only and tested on Cromi X v5.4. If you want a stable kernel, you can use Hund's kernel v3.4.5 from his original post below please. PLEASE STOP HERE IF YOU ARE NOT THEM, THANKS.
Hund's kernel is developed by Hundsbuah and you can find more information here: http://forum.xda-developers.com/showthread.php?t=2143093
I am running this ET for a while and have 6 testers on this ET too. It is very stable and fast in my opinion. Let me know if you are running into any issue or bug, thanks.
Preparation:
1. Backup your whole device in the TWRP and backup all your personal files to your external SD or your computer, just in case.
2. Remove any UV/OV scripts from the init.d folder before installing this tweaks
3. Remove the Fsync script from the init.d folder if any
4. Go to the Asus customized setting and Uncheck the "Enable smart backlight adjuster"
5. Download the correct ET zip for your file system below
Installation:
1. Reboot to your TWRP or custom recovery
2. Install the zip
3. Have fun...
Setting for this ET:
--Power Saving Mode: CPU/GPU: 1.1G/520M, Balance Mode: 1.4G/520M, and Performance Mode: 1.7G/700M
--Interactive Governor and SIO Scheduler
--Westwood TCP Congestion Control
--Fsync off
--CPU temperature throttle at 70 Celsius
--Power Saving Mode is setup for games. You can run most of games in this mode.
--Balance Mode is a daily usages beside gaming.
--Performance Mode is not for games except for daily usages. I am only playing games in this mode during the Winter because it is also my portable heater...:laugh:
I have the f2fs for Data2sd on the data partition that I am running if you need it please let me know so I can upload it for you.
Problems: For some reasons that your device is not booting, you may want to restore your system backup only and you should be up running from your previous setup...
Zip files:
---hund-v3.4.5_ET-v1.13.8_ext4 - For your internal data running ext4 file system.
---hund-v3.4.5_ET-v1.13.8_f2fs - For your internal data running f2fs file system.
Update: v1.13.9 should run roughly about 7 degree Celsius cooler than the v1.13.8 without suffering any performance loss which gives more battery life...
Update 1: If you are running f2fs on the internal /data partition, please install the ET_v1.13.10_f2fs. There is a bug in both ET-v1.13.8_f2fs and ET-v1.13.9_f2fs. It could cause some issues with data corruption.
Update 2: ET_v1.13.12 has very good battery life and very smooth....
Update 3: V2.0 should work properly without any bug and stable. Battery life should be better. For some reasons that your device does not run as smooth and fast as other users. You may want to update to the latest ET "build.prop". Good lucks and have fun.... Jelly Bean is probably end of life and this version may be the last release because I am getting bored with tweaking this device. I hope that I will see you in another Forum and see you all....
Bugs Reported
1. Dualboot is not working reported by Ananasnonym.
2. WLAN may be not working reported by Ananasnonym. Other users reported that it works...
3. A bug in the booting script f2fs zip found by me. Fixed with ET-v1.13.10.
Please report any bug or problem, thanks and enjoy.....

I am willing to test an f2fs version for you
Sent from my Transformer Prime TF201 using XDA Premium HD app

boldnuts said:
I am willing to test an f2fs version for you
Sent from my Transformer Prime TF201 using XDA Premium HD app
Click to expand...
Click to collapse
I have a data2sd zip using f2fs that I can upload for you now but if you need f2fs for the internal data, you have to wait until Monday when I am back home to use my PC...

LetMeKnow said:
I have a data2sd zip using f2fs that I can upload for you now but if you need f2fs for the internal data, you have to wait until Monday when I am back home to use my PC...
Click to expand...
Click to collapse
Monday is fine, using internal for now, thanks
Sent from my Transformer Prime TF201 using XDA Premium HD app

Not sure this will work on a 201 without some extra changes to the kernel. Flumpster used to mess around with hunds to get it working properly.

sbdags said:
Not sure this will work on a 201 without some extra changes to the kernel. Flumpster used to mess around with hunds to get it working properly.
Click to expand...
Click to collapse
I also have a TF700, so no issue there
Sent from my ASUS Transformer Pad TF700T using XDA Premium HD app

boldnuts said:
I also have a TF700, so no issue there
Sent from my ASUS Transformer Pad TF700T using XDA Premium HD app
Click to expand...
Click to collapse
Ah I didn't know that mate!

boldnuts said:
Monday is fine, using internal for now, thanks
Sent from my Transformer Prime TF201 using XDA Premium HD app
Click to expand...
Click to collapse
I will upload it for you on Monday....

@sbdags
Have you given it a test drive yet?

LetMeKnow said:
@sbdags
Have you given it a test drive yet?
Click to expand...
Click to collapse
Not yet as I use CROMi-X as my work machine so I have to re-secure the kernel and unroot it due to our draconian policies.
But I will diff your changes and look at porting them over to combi-kk Which I use as my play machine as ROM2SD

sbdags said:
Not yet as I use CROMi-X as my work machine so I have to re-secure the kernel and unroot it due to our draconian policies.
But I will diff your changes and look at porting them over to combi-kk Which I use as my play machine as ROM2SD
Click to expand...
Click to collapse
The boot.img is main driver for this new ET... Let me know if you need more information...

boldnuts said:
Monday is fine, using internal for now, thanks
Sent from my Transformer Prime TF201 using XDA Premium HD app
Click to expand...
Click to collapse
The f2fs for internal data is uploaded. Please give me some feedback and issues if any, thanks and have fun....

LetMeKnow said:
The f2fs for internal data is uploaded. Please give me some feedback and issues if any, thanks and have fun....
Click to expand...
Click to collapse
installed and running ok so far, I will test for a few days and get back to you, might also test on my tf201 with lower clock frequencies
Sent from my ASUS Transformer Pad TF700T using XDA Premium HD app

boldnuts said:
installed and running ok so far, I will test for a few days and get back to you, might also test on my tf201 with lower clock frequencies
Sent from my ASUS Transformer Pad TF700T using XDA Premium HD app
Click to expand...
Click to collapse
Thanks for a feedback...:good: It is a good start without any issue. You are the second testers using the f2fs on internal data with "discard" mounting option enable.. Some users reported that they have issue with booting when "discard" are enable on Kitkat Rom using f2fs. That is worry me a bit. For performance, it should be at least the same as your previous setup but it is more likely better... I am tweaking on wifi a lot and see improving on a large file download. Please pay attention in that area and report back. I have a mix feedback about wifi improvement from my testers. Some said it is better and some said it is the same. One said it is worst than before, haha. I don't know what is the true result...
About the tf201, I saw hund source code including the tf201 but the kernel is using higher OV for CPU/GPU setting. You may want to adjust the voltages to your needs for the tf201, good luck...:fingers-crossed:

LetMeKnow said:
Thanks for a feedback...:good: It is a good start without any issue. You are the second testers using the f2fs on internal data with "discard" mounting option enable.. Some users reported that they have issue with booting when "discard" are enable on Kitkat Rom using f2fs. That is worry me a bit. For performance, it should be at least the same as your previous setup but it is more likely better... I am tweaking on wifi a lot and see improving on a large file download. Please pay attention in that area and report back. I have a mix feedback about wifi improvement from my testers. Some said it is better and some said it is the same. One said it is worst than before, haha. I don't know what is the true result...
About the tf201, I saw hund source code including the tf201 but the kernel is using higher OV for CPU/GPU setting. You may want to adjust the voltages to your needs for the tf201, good luck...:fingers-crossed:
Click to expand...
Click to collapse
Installed on my tf201 with voltage and gpu speed adjustments, OC on the cpu is not working the max is 1400, but running fine so far
Sent from my Transformer Prime TF201 using XDA Premium HD app

boldnuts said:
Installed on my tf201 with voltage and gpu speed adjustments, OC on the cpu is not working the max is 1400, but running fine so far
Sent from my Transformer Prime TF201 using XDA Premium HD app
Click to expand...
Click to collapse
I am at the airport right now and don't have any access to my PC. I will take a look into it when I am home. BTW, I don't know anything about tf201 but I will look into it. The best bet is to ask the question on hundsbuah post. You can get there with the link on post #1.
Edit:
Do you see any performance improvement so far with this ET?

LetMeKnow said:
I am at the airport right now and don't have any access to my PC. I will take a look into it when I am home. BTW, I don't know anything about tf201 but I will look into it. The best bet is to ask the question on hundsbuah post. You can get there with the link on post #1.
Edit:
Do you see any performance improvement so far with this ET?
Click to expand...
Click to collapse
Yes the WiFi on both units seems to be improved when transferring large files, very smooth overall so far
Sent from my ASUS Transformer Pad TF700T using XDA Premium HD app

Possible kexecboot with data2sd?
Hey, I extracted the kernel (zImage) and ramdisk (initrd.img) from the zip (blobunpack and unpackbootimg) so that I can use it with kexecboot menu for linux multiboot, but it does not start Android (I have a data2sd setup). That10 boots fine in a setup like this, but I want to use the ET
Any ideas?

Ananasnonym said:
Hey, I extracted the kernel (zImage) and ramdisk (initrd.img) from the zip (blobunpack and unpackbootimg) so that I can use it with kexecboot menu for linux multiboot, but it does not start Android (I have a data2sd setup). That10 boots fine in a setup like this, but I want to use the ET
Any ideas?
Click to expand...
Click to collapse
Does it work with the earlier ET version? I just updated my crosstool chain and may changed somethings in the kenel configure setting. I will take a look at it when I am back from my business trip....

LetMeKnow said:
Does it work with the earlier ET version? I just updated my crosstool chain and may changed somethings in the kenel configure setting. I will take a look at it when I am back from my business trip....
Click to expand...
Click to collapse
Yes it worked with earlier Versions (The one you sent me for testing and old old published ET). Might be that you deactivated kexec in the config? (Just a guess)