Database Info

[Q] Bootlooping with broken power button

my nexus s is bootlooping and I have a broken power button. I cant get into recovery to try to do a nandroid restore. Is there anything I can do to get into recovery.
Thanks guys in advance

you can flash a new rom with fastboot.
but 1st you need your kindle to shutdown.
you may after wait for battery to drain.
you need it to boot up yellow triangle screen.
Sent from my Kindle Fire using xda premium

you can boot up recovery through fastboot

Adb won't get you into recovery?
Sent from my Nexus S using XDA

my phone doesn't respond at all in fastboot and volume rocker doesn't work at all. I tried tapping or smacking near the power button for a long time and still nothing.

themonkeyera1 said:
my phone doesn't respond at all in fastboot and volume rocker doesn't work at all. I tried tapping or smacking near the power button for a long time and still nothing.
Click to expand...
Click to collapse
if you dont get any response from your volume buttons, you can use odin. theres a thread here that explains how to do it through odin.
---------- Post added at 04:32 PM ---------- Previous post was at 04:31 PM ----------
themonkeyera1 said:
my phone doesn't respond at all in fastboot and volume rocker doesn't work at all. I tried tapping or smacking near the power button for a long time and still nothing.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1538001&highlight=odin+power+button

I read somewhere about taking the battery out and then plugging in the phone to usb with ADB running, or was it ODIN, it should boot in to download mode, and from there you can get in to recovery, I seen it done on youtube as well, I think you might need to press the volume up button when you put the battery in, hope it helps

help! stock moto g won't boot into recovery

Hi, I'm hoping i'm just being stupid but i can't get my moto go to boot into recovery.
i powered it off, changed sim cards and now it boot loops.
so boot into fastboot menu and choose any option(except barcode and the one that changes codepages or whatever) and it just goes back into boot loop. any bright ideas anyone? not been a good day so far today, my number just got ported over to OVIVO today. but they stopped operating yesterday - the joys... :crying:
cheers!

What did you else do with your phone? Is it stock? Or did you flash anything? Are you pressing volume up to select option? Did you try a factory reset?

mokkami said:
What did you else do with your phone? Is it stock? Or did you flash anything? Are you pressing volume up to select option? Did you try a factory reset?
Click to expand...
Click to collapse
nothing!
it's completely stock. i think i installed 1 app (philips hue). was working fine. powered off normally, took the sim out, put new one in - boot loops!
i can't do a factory reset as it when you choose anything out of the fastboot it reboots. and that's using the volume up to select options.
i think i'll just take it back to the shop. but it's a pain in the neck

Yeah 2 options fiddling around yourself or going to the shop.
I would go back to the shop and ask there as it is untouched.
Maybe it has seriously some problems.
If you want to try it yourself i would reccomend you to reflash.
---------- Post added at 07:06 PM ---------- Previous post was at 07:03 PM ----------
Are you sure you are pressing volume up?
Last days somebody had security case for the phone.
When he pressed the gum layerd buttons he accidently pressd the power button.
Once he took off the case it worked for him.

Maybe restore firmware
hardflipman said:
Hi, I'm hoping i'm just being stupid but i can't get my moto go to boot into recovery.
i powered it off, changed sim cards and now it boot loops.
so boot into fastboot menu and choose any option(except barcode and the one that changes codepages or whatever) and it just goes back into boot loop. any bright ideas anyone? not been a good day so far today, my number just got ported over to OVIVO today. but they stopped operating yesterday - the joys... :crying:
cheers!
Click to expand...
Click to collapse
Try this http://forum.xda-developers.com/showthread.php?t=2646415
hopefully this helps restoring your phone back to factory settings

I think this will help
1. With the phone powered off, press the VOL DOWN KEY for 2-3 seconds then POWER key then release.
2. The device will display different BOOT OPTIONS
3. Use the VOL DOWN Key to SCROLL to Recovery and VOL UP Key to select
Tip: If the device reboots, you may have waited to long to make a selection, you will need to begin the process again.
4. The device will display the Motorola logo and then the Android in distress ( logo with Exclamation mark)
5. Press and hold the VOL UP key for 10-15 seconds. While still holding the VOL UP key tap and release the POWER key
Tip: You can try this step, holding the phone in landscape. If you are stuck on step 6, try a force reboot by pressing the Power key and Vol Down key, and start the process again.

Try to perform a wipe data. In my case it works.
Inviato dal mio LG-D802 utilizzando Tapatalk

MOTO G factory reset not working
only answer I found that worked! tapping the power button worked-THANK YOU!

hardflipman said:
Hi, I'm hoping i'm just being stupid but i can't get my moto go to boot into recovery.
i powered it off, changed sim cards and now it boot loops.
so boot into fastboot menu and choose any option(except barcode and the one that changes codepages or whatever) and it just goes back into boot loop. any bright ideas anyone? not been a good day so far today, my number just got ported over to OVIVO today. but they stopped operating yesterday - the joys... :crying:
cheers!
Click to expand...
Click to collapse
can u boot into the bootloader? what happened when u put in your orinal sim?

manojkrmkr said:
1. With the phone powered off, press the VOL DOWN KEY for 2-3 seconds then POWER key then release.
2. The device will display different BOOT OPTIONS
3. Use the VOL DOWN Key to SCROLL to Recovery and VOL UP Key to select
Tip: If the device reboots, you may have waited to long to make a selection, you will need to begin the process again.
4. The device will display the Motorola logo and then the Android in distress ( logo with Exclamation mark)
5. Press and hold the VOL UP key for 10-15 seconds. While still holding the VOL UP key tap and release the POWER key
Tip: You can try this step, holding the phone in landscape. If you are stuck on step 6, try a force reboot by pressing the Power key and Vol Down key, and start the process again.
Click to expand...
Click to collapse
Thanks a lot! Every time I choose the power button to confirm and not the volume up key...

milotheowner said:
Try this http://forum.xda-developers.com/showthread.php?t=2646415
hopefully this helps restoring your phone back to factory settings
Click to expand...
Click to collapse
THANKS! YOU SAVED MY LIFE xD
The option for " hold both volume up and down" to enter recovery saved me thanks a lot :laugh::laugh::laugh:

[Q] Help 10.1 stuck at Samsung logo!

Hi, my Samsung note 10.1 is stuck at the start logo. I googled it and looked at solutions on this site but my situation seems more hopeless than others I've read about. Firstly, I have never rooted this and it should be running ICS. I had left my (working) tablet for about 10 hours and tried to activate the screen when I picked it up. I pressed the power button which gave me the Samsung Galaxy Note 10.1 logo which stayed on the screen and wouldn't budge but when I held the power and volume buttons, it would go off after 4 or five seconds only to come on again. I have looked at these and other forums and have tried a hard re-set but I just get the same logo appearing again and again. I couldn't actually turn it off, so I opened it and disconnected the battery. This has made no difference. I removed the SD card while I tried every permutation of pressing buttons but all to no avail. Please help. Is this now permanently dead? I would love to do a re-set and don't care about losing stuff but that doesn't work.????
Thanks for reading this....

Curlykale said:
Hi, my Samsung note 10.1 is stuck at the start logo. I googled it and looked at solutions on this site but my situation seems more hopeless than others I've read about. Firstly, I have never rooted this and it should be running ICS. I had left my (working) tablet for about 10 hours and tried to activate the screen when I picked it up. I pressed the power button which gave me the Samsung Galaxy Note 10.1 logo which stayed on the screen and wouldn't budge but when I held the power and volume buttons, it would go off after 4 or five seconds only to come on again. I have looked at these and other forums and have tried a hard re-set but I just get the same logo appearing again and again. I couldn't actually turn it off, so I opened it and disconnected the battery. This has made no difference. I removed the SD card while I tried every permutation of pressing buttons but all to no avail. Please help. Is this now permanently dead? I would love to do a re-set and don't care about losing stuff but that doesn't work.????
Thanks for reading this....
Click to expand...
Click to collapse
When you tried the On/Off + Volume Up (at the same time), did you get the default recovery mode?

Still not working
Robbie Doo said:
When you tried the On/Off + Volume Up (at the same time), did you get the default recovery mode?
Click to expand...
Click to collapse
Unfortunately, no, I always get the same Samsung Galaxy Note 10.1 white writing on the black background...

Robbie Doo said:
When you tried the On/Off + Volume Up (at the same time), did you get the default recovery mode?
Click to expand...
Click to collapse
can u get into download mode by pressing power and volume down ?

sbdanish911 said:
can u get into download mode by pressing power and volume down ?
Click to expand...
Click to collapse
Yes, that's the method to get into download mode. You need to press them both at the same time.
---------- Post added at 02:13 PM ---------- Previous post was at 02:11 PM ----------
Curlykale said:
Unfortunately, no, I always get the same Samsung Galaxy Note 10.1 white writing on the black background...
Click to expand...
Click to collapse
When you press the On/Off + Volume Up buttons at the same time you need to hold them until the writing shows up. Once you see the Samsung logo then let the buttons go. If you release the buttons before that the device will just do a regular boot instead.

Still not working
Robbie Doo said:
Yes, that's the method to get into download mode. You need to press them both at the same time.
---------- Post added at 02:13 PM ---------- Previous post was at 02:11 PM ----------
When you press the On/Off + Volume Up buttons at the same time you need to hold them until the writing shows up. Once you see the Samsung logo then let the buttons go. If you release the buttons before that the device will just do a regular boot instead.
Click to expand...
Click to collapse
I've tried all the possible combinations permutations, before, after, both, singly...still makes no difference, I just get the same logo...

Curlykale said:
I've tried all the possible combinations permutations, before, after, both, singly...still makes no difference, I just get the same logo...
Click to expand...
Click to collapse
I have the exact same issue, stuck at screen, also just got it yesterday. I believe it is due to kitkat OTA, as I was running 4.1.2 and was not planning to update. I think the tablet somehow updated itself.
---------- Post added at 01:14 PM ---------- Previous post was at 12:16 PM ----------
I also tried flashing various recovery, including the stock recovery, TWRP, CWM. The furthest I get to the recovery is the android boot logo, and it reboots back to the "Samsung Galaxy Note 10.1" logo screen
I think it would be fine if I can hard reset the device, but no dice for now.
Going to try flashing older 4.1.2 rom later. Hope that works.

still not working
sadakochin said:
I have the exact same issue, stuck at screen, also just got it yesterday. I believe it is due to kitkat OTA, as I was running 4.1.2 and was not planning to update. I think the tablet somehow updated itself.
---------- Post added at 01:14 PM ---------- Previous post was at 12:16 PM ----------
I also tried flashing various recovery, including the stock recovery, TWRP, CWM. The furthest I get to the recovery is the android boot logo, and it reboots back to the "Samsung Galaxy Note 10.1" logo screen
I think it would be fine if I can hard reset the device, but no dice for now.
Going to try flashing older 4.1.2 rom later. Hope that works.
Click to expand...
Click to collapse
Thanks for this, it would explain why my 10.1 suddenly became useless without me doing anything to it. I've read that the KIt Kat update was only made available to the wi-fi and 3G versions and that installing it on the Wi-Fi only could brick it!
Can you point me in the direction of a guide to trying what you've done? Otherwise this is going back to Samsung to fix for silly money, no doubt.

Turn off the tablet completely. Then, press the Volume Up and On/Off buttons at the same time for a few seconds until you see the writings come up (most likely the Samsung logo). As soon as you see the writings let the buttons go. That will get you into the Recovery mode. Do a Factory Reset and reboot.
You have to set up everything after doing this but at least you'll get your tablet back.

Robbie Doo said:
Turn off the tablet completely. Then, press the Volume Up and On/Off buttons at the same time for a few seconds until you see the writings come up (most likely the Samsung logo). As soon as you see the writings let the buttons go. That will get you into the Recovery mode. Do a Factory Reset and reboot.
You have to set up everything after doing this but at least you'll get your tablet back.
Click to expand...
Click to collapse
Nope, apparently after asking around , mosts owners that bricked their device this way, can't enter recovery mode. It just shows the android logo that supposedly leads to the recovery option for a few secs, and restarts. I think its an issue with the new bootloader 4.4 is bundled with, that only afflicts a small number of devices. I even have a colleague at work that had the same problem after auto updating, but somehow after multiple reboots getting stuck at the logo screen, it now works properly, and boots up with 4.4 instead of the previous os.

sadakochin said:
Nope, apparently after asking around , mosts owners that bricked their device this way, can't enter recovery mode. It just shows the android logo that supposedly leads to the recovery option for a few secs, and restarts. I think its an issue with the new bootloader 4.4 is bundled with, that only afflicts a small number of devices. I even have a colleague at work that had the same problem after auto updating, but somehow after multiple reboots getting stuck at the logo screen, it now works properly, and boots up with 4.4 instead of the previous os.
Click to expand...
Click to collapse
So I assume you got your tablet working ok.

Robbie Doo said:
So I assume you got your tablet working ok.
Click to expand...
Click to collapse
Nope, thats my colleague's tablet. At my workplace, most use note 10.1 tablet, so i had a generous sampling. Most upgraded without incident, but some, like me and a few others, are all suffering the same issue. All within weeks of the kitkat update rollout i my country.

sadakochin said:
Nope, thats my colleague's tablet. At my workplace, most use note 10.1 tablet, so i had a generous sampling. Most upgraded without incident, but some, like me and a few others, are all suffering the same issue. All within weeks of the kitkat update rollout i my country.
Click to expand...
Click to collapse
I still don't know why you can't get into the Recovery mode with the Vol. Up + On/Off?
Do you hold the buttons until you see the logo comes up or you let it go before that?

Robbie Doo said:
I still don't know why you can't get into the Recovery mode with the Vol. Up + On/Off?
Do you hold the buttons until you see the logo comes up or you let it go before that?
Click to expand...
Click to collapse
I have been using custom and stock recovery on my almost 2 year old note 10.1. Pretty sure I did not make a mistake pressing it, its just that the recovery mode loads and fail. I see the android recovery logo for a sec or two, then it reboots before showing the recovery menu. So this boot loop prevents most people from reseting/wipe from the recovery menu.
But its rather nonsensical to assume a guy who knows how to flash custom recovery on his almost 2 year old note 10.1 doesn't know how to enter the recovery mode, don't you think?

sadakochin said:
I have been using custom and stock recovery on my almost 2 year old note 10.1. Pretty sure I did not make a mistake pressing it, its just that the recovery mode loads and fail. I see the android recovery logo for a sec or two, then it reboots before showing the recovery menu. So this boot loop prevents most people from reseting/wipe from the recovery menu.
But its rather nonsensical to assume a guy who knows how to flash custom recovery on his almost 2 year old note 10.1 doesn't know how to enter the recovery mode, don't you think?
Click to expand...
Click to collapse
I agree. Well, I couldn't find any information regarding your situation. Sorry pal. I wish you luck.

I think that I can tell you an old experience I had. I was on stock Jelly Bean. It wasn't this type of a problem but maybe it might help somebody. Here's what happened:
I was using my tablet in the afternoon and I pressed the power button to close the screen. Then I left. After a while I came back and tried turning on my tablet. It wasn't turning on. It wasn't reacting to anything. Neither the power button, nor the charger. I searched online and found out that you could hold your finger on the screen while pressing the power button. And guess what! My tablet showed the charging screen. Then I just booted normally. My tablet was just like before!
Sent from my SCH-R760 using XDA Free mobile app

I join the queue to see if anyone brings any solution, because I have exactly the same problem

up
up

Same problem!!!
I have been all over for days on this. I can get into odin mode, but it absolutely will not go into recovery mode. I ran Odin3 v3.0.7 and twrp, no luck, would just lock up. I ran Odin3 3.10.7 and sammmobile factory firmware. This says Pass! but it still just hitches at the title screen. I can't even get it to turn off. Only way is to run it dead or unplug the batt internally. Please help? Is there nothing I can do?

mcampbell1031 said:
I have been all over for days on this. I can get into odin mode, but it absolutely will not go into recovery mode. I ran Odin3 v3.0.7 and twrp, no luck, would just lock up. I ran Odin3 3.10.7 and sammmobile factory firmware. This says Pass! but it still just hitches at the title screen. I can't even get it to turn off. Only way is to run it dead or unplug the batt internally. Please help? Is there nothing I can do?
Click to expand...
Click to collapse
I'm coming for two years with the same problem as you, and I have not found a solution in any forum. I'm losing hope
Enviado desde mi GT-I9505 mediante Tapatalk

Huawei EC6108v8 Android TV

Anyone know about this particular android tv model? how to root, access recovery mode?

recovery mode
highrulez said:
Anyone know about this particular android tv model? how to root, access recovery mode?
Click to expand...
Click to collapse
my tv box stuck on "starting" screen and no moving, i was trying to access recovery mode by pressing the power button while turning on using the physical key but it didn't happen, and while i was trying all the button, it came out to recovery mode but i couldn't make it again crazy right? not sure what was it, it was power button with something else but i tried so many times and i couldn't get anything. now am calling the service to fix it for me.
good luck and let me know!

Mesho81 said:
my tv box stuck on "starting" screen and no moving, i was trying to access recovery mode by pressing the power button while turning on using the physical key but it didn't happen, and while i was trying all the button, it came out to recovery mode but i couldn't make it again crazy right? not sure what was it, it was power button with something else but i tried so many times and i couldn't get anything. now am calling the service to fix it for me.
good luck and let me know!
Click to expand...
Click to collapse
hello there. which power button are you referring. is it power button on the remote with something else or power button on the device with something else?
im stuck on starting screen too. if i can get to recovery....*sigh*
update 4/4/16 : Found it guys!. I'll update you guys later.

linkinxmen said:
hello there. which power button are you referring. is it power button on the remote with something else or power button on the device with something else?
im stuck on starting screen too. if i can get to recovery....*sigh*
update 4/4/16 : Found it guys!. I'll update you guys later.
Click to expand...
Click to collapse
i have tried the buttons on the remote randomly. unfortunately i don't know which buttons and it didn't last!
ended up calling service provider to fix it for me. they re install the software

Hi,
Today is 20th April 2016. Can u share the method to go to recovery mode, please. Mine is stuck at "starting". Thanks.
linkinxmen said:
hello there. which power button are you referring. is it power button on the remote with something else or power button on the device with something else?
im stuck on starting screen too. if i can get to recovery....*sigh*
update 4/4/16 : Found it guys!. I'll update you guys later.
Click to expand...
Click to collapse

Any update on how to fix this error...??
Sent from my D6653 using Tapatalk

Mesho81 said:
i have tried the buttons on the remote randomly. unfortunately i don't know which buttons and it didn't last!
ended up calling service provider to fix it for me. they re install the software
Click to expand...
Click to collapse
hayenadeblue said:
Hi,
Today is 20th April 2016. Can u share the method to go to recovery mode, please. Mine is stuck at "starting". Thanks.
Click to expand...
Click to collapse
zfitri said:
Any update on how to fix this error...??
Sent from my D6653 using Tapatalk
Click to expand...
Click to collapse
Im sorry guys taking too long to respond.
here's how its work for me.
1. turn off the android box.
2. before you push the turn on button on android box, press turn button on remote repeatedly.
3. while push button 'turn on' on remote repeatedly, push your android box button 'turn on' once.
4. keep repeatedly push button 'turn on' on your remote until its enter recovery mode.
5. voila.
I'm still exploring this android box. If you guys have better or another idea, better post it in here.
i hope this help. thanks.

Thanks for the tips. Done it but just a little different. Switch on the power button on the back of the stb & immediately after that pressing the red power button on the remote repeatedly. Now it is time to work harder searching for the latest android for this stb.

ustazshifu said:
Thanks for the tips. Done it but just a little different. Switch on the power button on the back of the stb & immediately after that pressing the red power button on the remote repeatedly. Now it is time to work harder searching for the latest android for this stb.
Click to expand...
Click to collapse
your stb is android version 4.4.2?

linkinxmen said:
your stb is android version 4.4.2?
Click to expand...
Click to collapse
Will check it for you tomorrow. Nite

Does anyone know how to connect this device to computer via ADB? Or how to root it - then I can use ADB via WLAN. Tried Kingroot, no success.

can you tell me the password for the anfroid tv?
hypptv huawei vEC6108v8

can you tell me the password for the anfroid tv?
hypptv huawei vEC6108v8
---------- Post added at 07:41 AM ---------- Previous post was at 07:36 AM ----------
ustazshifu said:
Thanks for the tips. Done it but just a little different. Switch on the power button on the back of the stb & immediately after that pressing the red power button on the remote repeatedly. Now it is time to work harder searching for the latest android for this stb.
Click to expand...
Click to collapse
Is your box hypptv huawei vEC6108v8 (white box) ?

so successfully entered the recovery mode but now asking for password... any idea ?
---------- Post added at 12:35 PM ---------- Previous post was at 12:11 PM ----------
i keyed in 3008 for few times and it was wrong. i had to turn off the stb from the back, now it keeps restarting, i think i screwed up the device!

ok so the password for the recovery is 304830 and from there i managed to roll back to the old software. i re installed all my apps after that . need to call TM to get my IPTV login information.

Mesho81 said:
ok so the password for the recovery is 304830 and from there i managed to roll back to the old software. i re installed all my apps after that . need to call TM to get my IPTV login information.
Click to expand...
Click to collapse
would you know if we can update this box to android 5.0?

I see everyone talking about recovery mode, but my question is where are you guys getting the firmware that your upgrading and downgrading???

Does anyone have the software for this box?
Sent from my GT-I9500 using Tapatalk

reaperlinkz said:
Does anyone have the software for this box?
Sent from my GT-I9500 using Tapatalk
Click to expand...
Click to collapse
Nobody seems to know what to do with this... I have 2 of them just here doing nothing... 0 support

CrashpiG said:
Nobody seems to know what to do with this... I have 2 of them just here doing nothing... 0 support
Click to expand...
Click to collapse
I see, thats messed up.
Sent from my GT-I9500 using Tapatalk

"only official released binaries are allowed to be flashed"

I tried to root phone with twrp and magisk but forgot to turn on oem-unlock, so I am stuck now and getting "only official released binaries are allowed to be flashed" notification. I can neither boot in download mode to flash stock rom, i tried many times. getting same red notification doesn't matter which button combinations I hold. Do you know how to solve that?

mtogonid said:
I tried to root phone with twrp and magisk but forgot to turn on oem-unlock, so I am stuck now and getting "only official released binaries are allowed to be flashed" notification. I can neither boot in download mode to flash stock rom, i tried many times. getting same red notification doesn't matter which button combinations I hold. Do you know how to solve that?
Click to expand...
Click to collapse
Plug in USB cable, hold power, vol up, vol down until download mode appears.

ashyx said:
Plug in USB cable, hold power, vol up, vol down until download mode appears.
Click to expand...
Click to collapse
Do I have to hold it for a long time? I tried, but it's still same, as soon as I connect it to PC red notification starts blinking.
I rooted it long time ago, today I did factory reset from twrp and as I wanted to flash magisk I forgot to activate developer options and after that I have this problem. Maybe I have to wait for some time?

mtogonid said:
Do I have to hold it for a long time? I tried, but it's still same, as soon as I connect it to PC red notification starts blinking.
I rooted it long time ago, today I did factory reset from twrp and as I wanted to flash magisk I forgot to activate developer options and after that I have this problem. Maybe I have to wait for some time?
Click to expand...
Click to collapse
Like I said, just continue to hold until you see download mode.

It doesn't work. Is something else I can do?
Edit: I fixed it, thank you. It was just other button combination

what combination button you press?

mtogonid said:
It doesn't work. Is something else I can do?
Edit: I fixed it, thank you. It was just other button combination
Click to expand...
Click to collapse
what combination button did you press? please help same issue..

razell25 said:
what combination button did you press? please help same issue..
Click to expand...
Click to collapse
Power button + Volume down and then plug in USB-Cable, that should put phone in download mode.

do i need usb driver for this?
---------- Post added at 01:14 AM ---------- Previous post was at 01:12 AM ----------
mtogonid said:
Power button + Volume down and then plug in USB-Cable, that should put phone in download mode.
Click to expand...
Click to collapse
do i need samsung usb driver for this? thanks mate

razell25 said:
do i need usb driver for this?
---------- Post added at 01:14 AM ---------- Previous post was at 01:12 AM ----------
do i need samsung usb driver for this? thanks mate
Click to expand...
Click to collapse
For putting phone in download mode no, but you have to flash stock rom again so you will need them.
If volume down + power button + plug usb cable didn't work, try volume up + power button + plug usb cable and connect to PC, it should put phone in download mode in few seconds.
Here are links you need to install android OS again.
Android USB Driver for Windows: https://developer.samsung.com/galaxy/others/android-usb-driver-for-windows
Odin v3.12.7- Samsung Android Flash-Tool: https://odin-samsung.com/de/odin-v3-12-7-samsung-android-herunterladen.html
Stock Rom: https://www.sammobile.com/firmwares/archive/

can anyone send me TWRP recovery file for samsung j4, but not in rar or zip file please