Database Info

[Solved] can`t or dont know how to enter recovery mode. Sony Xperia C3

i tried like this:
1. First of all turn off the device by holding the Power button.
2. Afterwards hold down the Volume Up and Volume Down button for a couple of seconds.
3. While holding these buttons press the Power button for a short while.
4. Release held keys when you see an Andoid image.
5. Then press the Camera button to enter Recovery Mode.
and noting. there is no android image.
and also when i press and hold power+ volume up the phone turn on and then after 2-3 sec the phone vibrate 3 time.
what is that 3 vibrations?
so how do i enter the recovery???
thanks!

UP

Shlomi93 said:
UP
Click to expand...
Click to collapse
Power down your device.
Press and hold POWER + VOLUME DOWN
After the Sony logo disappears, release the POWER button and continue to hold VOLUME DOWN for 3 seconds.
This will allow you to boot to recovery.
Sent from my Nexus 6 using XDA-Developers mobile app

fast69mopar said:
Power down your device.
Press and hold POWER + VOLUME DOWN
After the Sony logo disappears, release the POWER button and continue to hold VOLUME DOWN for 3 seconds.
This will allow you to boot to recovery.
Sent from my Nexus 6 using XDA-Developers mobile app
Click to expand...
Click to collapse
there is no logo. if i press and hold volume up + power i feel one vibration and the after 2 sec i feel 3 more vibrations and it keep going like that in a loop.
and there is no logo. the screen doesnt even turns on.

Shlomi93 said:
there is no logo. if i press and hold volume up + power i feel one vibration and the after 2 sec i feel 3 more vibrations and it keep going like that in a loop.
and there is no logo. the screen doesnt even turns on.
Click to expand...
Click to collapse
I may have given you incorrect steps and that's my fault. I was reading about a different device. My bad. Try this:
Power off your device.
Press and hold VOLUME UP + POWER at the same time.
Release all buttons when the Sony Xperia C3 screen flickers and in a few seconds the Recovery screen will appear.
You can also try this:
Reboot your phone, as it's rebooting, press volume down + power. You should then see the Android robot after restart, release buttons and press camera shutter.?
---------- Post added at 11:37 PM ---------- Previous post was at 11:26 PM ----------
Okay, quick question. Have you installed a custom recovery? If not, your device was not shipped with a stock recovery in and therefore you will not be able to boot into recovery.

fast69mopar said:
I may have given you incorrect steps and that's my fault. I was reading about a different device. My bad. Try this:
Power off your device.
Press and hold VOLUME UP + POWER at the same time.
Release all buttons when the Sony Xperia C3 screen flickers and in a few seconds the Recovery screen will appear.
You can also try this:
Reboot your phone, as it's rebooting, press volume down + power. You should then see the Android robot after restart, release buttons and press camera shutter.?
---------- Post added at 11:37 PM ---------- Previous post was at 11:26 PM ----------
Okay, quick question. Have you installed a custom recovery? If not, your device was not shipped with a stock recovery in and therefore you will not be able to boot into recovery.
Click to expand...
Click to collapse
well, no. i didnt flashed a custom recovery since i cant.
the only thing i can do is access to fastboot and i get an error while trying to send commands through SDK
fastboot failed remote unknown command
i searched in google but i havent found any solution.
any idea?

Shlomi93 said:
well, no. i didnt flashed a custom recovery since i cant.
the only thing i can do is access to fastboot and i get an error while trying to send commands through SDK
fastboot failed remote unknown command
i searched in google but i havent found any solution.
any idea?
Click to expand...
Click to collapse
Lemme take a look at my Sony stuff and see if I can find a solution.
Sent from my Nexus 6 using XDA-Developers mobile app

fast69mopar said:
Lemme take a look at my Sony stuff and see if I can find a solution.
Sent from my Nexus 6 using XDA-Developers mobile app
Click to expand...
Click to collapse
ok i will wait for your replay! thanks a lot man.

Shlomi93 said:
ok i will wait for your replay! thanks a lot man.
Click to expand...
Click to collapse
Try using this guide to install recovery
http://forum.xda-developers.com/sony-xperia-c/help/comprehensive-guide-rooting-flashing-c3-t3277939

Shlomi93 said:
ok i will wait for your replay! thanks a lot man.
Click to expand...
Click to collapse
Do something for me first... Let's make sure your ADB fastboot is working properly.
If your device will boot normally, navigate to DEVELOPER OPTIONS and make sure you have enabled USB DEBUGGING.
Next, open a COMMAND PROMPT window and type:
adb devices
If the adb daemon is not running, you will see the COMMAND PROMPT say that it is starting the daemon on a certain port number.
Type this again:
adb devices
Your COMMAND PROMPT should return with a list of attached devices with your serial number.
Next, type this:
adb reboot bootloader
If it's working properly you should be booted into the bootloader and your LED should be a solid blue.
If you want to boot to the bootloader with the hard keys then do this:
Power off your device
Connect the USB cable to your PC
Press and hold POWER UP and plug in the USB cable to your device while still holding POWER UP.
This should boot you into the bootloader with a solid blue LED.
Let me know if these steps are working and post back with what you find
Sent from my Nexus 6 using XDA-Developers mobile app

fast69mopar said:
Do something for me first... Let's make sure your ADB fastboot is working properly.
If your device will boot normally, navigate to DEVELOPER OPTIONS and make sure you have enabled USB DEBUGGING.
Next, open a COMMAND PROMPT window and type:
adb devices
If the adb daemon is not running, you will see the COMMAND PROMPT say that it is starting the daemon on a certain port number.
Type this again:
adb devices
Your COMMAND PROMPT should return with a list of attached devices with your serial number.
Next, type this:
adb reboot bootloader
If it's working properly you should be booted into the bootloader and your LED should be a solid blue.
If you want to boot to the bootloader with the hard keys then do this:
Power off your device
Connect the USB cable to your PC
Press and hold POWER UP and plug in the USB cable to your device while still holding POWER UP.
This should boot you into the bootloader with a solid blue LED.
Let me know if these steps are working and post back with what you find
Sent from my Nexus 6 using XDA-Developers mobile app
Click to expand...
Click to collapse
yes this works. i mean the volume up and usb cable let me go into bootloader. i see blue led and device is on debuging mode but i am unable to get into the device since i forgot the pass code.
this is why i want to get into recovery. i want to wipe data so the pass code will be removed.
beacuse of the pass code i cannot send adb commands through the lock screen.
anyway, there is somthing i can do to wipe data or flash a new rom or remove passcode through bootloader? (the black screen with the blue led)

fast69mopar said:
Do something for me first... Let's make sure your ADB fastboot i..............................................
XDA-Developers mobile app
Click to expand...
Click to collapse
my friend, thank you for your help but i found a solution.
The Solution​
1. find a ftf file (firmware for sony device) i used this ------------->>>> https://docs.google.com/uc?id=0B1AAC4lt7nzOM0plZW56MHZXYkE&export=download
2. download FlashTool (by Androxyed) from the official site --->>>> http://www.flashtool.net/index.php
3. flash the phone like this guy here --------------------------------->>>> https://www.youtube.com/watch?v=vlyVdz1CIbY
and boom. no password. you can choose if to wipe data or not.
btw:
still didnt found a way to get into recovery

Shlomi93 said:
my friend, thank you for your help but i found a solution.
The Solution
1. find a ftf file (firmware for sony device) i used this ------------->>>> https://docs.google.com/uc?id=0B1AAC4lt7nzOM0plZW56MHZXYkE&export=download
2. download FlashTool (by Androxyed) from the official site --->>>> http://www.flashtool.net/index.php
3. flash the phone like this guy here --------------------------------->>>>
and boom. no password. you can choose if to wipe data or not.
btw:
still didnt found a way to get into recovery
Click to expand...
Click to collapse
I was actually putting together a post for you with the exact same solution. I read over the details a little while ago. Glad you got it working. Good job.

Please Help me

Hey guys,
I just bought the Samsung J4+ (SM-J415F) and now have a dead phone after flashing a firmware. It doesnt turn on. I cannot put it into recovery mode. The screen is always black. This is the order of events:
1. I succesfully flashed twrp + supersu (i followed the steps from this page: https://forum.xda-developers.com/gal...j415f-t3876876)
2. After doing that i had a bootloop.
3. I decided to flash the following rom to get rid of the bootloop: [up_vnROM.net]_J415FXXU1ARIK_J415FOJM1ARIK_EGY_8.1_FULL (https://www.firm-ware.com/2018/10/sa...-download.html)
4. This also worked successfully and i saw the android symbol for a few seconds. However, then the power went off. Now the phone is dead.
It seems like i can turn it on to download mode (screen still black tho) and connect it to odin (odin is recognizing the phone) but if i try to flash again it stucks on "setup connection". I am using odin 3.13.1. Yes I already tried to run odin as administrator but it didnt change anything.
Any ideas how to bring my phone back to life? Any help would be appreciated.

muzammilghani1994 said:
Hey guys,
I just bought the Samsung J4+ (SM-J415F) and now have a dead phone after flashing a firmware. It doesnt turn on. I cannot put it into recovery mode. The screen is always black. This is the order of events:
1. I succesfully flashed twrp + supersu (i followed the steps from this page: https://forum.xda-developers.com/gal...j415f-t3876876)
2. After doing that i had a bootloop.
3. I decided to flash the following rom to get rid of the bootloop: [up_vnROM.net]_J415FXXU1ARIK_J415FOJM1ARIK_EGY_8.1_FULL (https://www.firm-ware.com/2018/10/sa...-download.html)
4. This also worked successfully and i saw the android symbol for a few seconds. However, then the power went off. Now the phone is dead.
It seems like i can turn it on to download mode (screen still black tho) and connect it to odin (odin is recognizing the phone) but if i try to flash again it stucks on "setup connection". I am using odin 3.13.1. Yes I already tried to run odin as administrator but it didnt change anything.
Any ideas how to bring my phone back to life? Any help would be appreciated.
Click to expand...
Click to collapse
How are you getting to download mode?
It seems you are not actually in download mode, but the phone is in a semi booted state.

ashyx said:
How are you getting to download mode?
It seems you are not actually in download mode, but the phone is in a semi booted state.
Click to expand...
Click to collapse
when turn on the phone with vol down + power button then i just seeing the android symbol for a few seconds. However, then the power went off. no download mode, no recovery.

u there?
Sent from my HTV32 using Tapatalk

muzammilghani1994 said:
when turn on the phone with vol down + power button then i just seeing the android symbol for a few seconds. However, then the power went off. no download mode, no recovery.
Click to expand...
Click to collapse
That will just reboot the device.
Plug the USB cable in then hold POWER + VOL UP + VOL DOWN.

ashyx said:
That will just reboot the device.
Plug the USB cable in then hold POWER + VOL UP + VOL DOWN.
Click to expand...
Click to collapse
doesn't work. when i do this its only restart the phone.
Sent from my HTV32 using Tapatalk

muzammilghani1994 said:
doesn't work. when i do this its only restart the phone.
Click to expand...
Click to collapse
Did you ensure the cable was attached to both device and pc?
If so I suggest you try another cable.

ashyx said:
Did you ensure the cable was attached to both device and pc?
If so I suggest you try another cable.
Click to expand...
Click to collapse
nope it's not working.
Sent from my HTV32 using Tapatalk

ashyx said:
Did you ensure the cable was attached to both device and pc?
If so I suggest you try another cable.
Click to expand...
Click to collapse
https://youtu.be/ZCKJud_qp5A
check it out i upload video of my issue.
Sent from my HTV32 using Tapatalk

muzammilghani1994 said:
check it out i upload video of my issue.
Click to expand...
Click to collapse
This will happen if your cable is not connected to both PC and device.
The device needs to detect it is connected to a PC.
I suggest changing the cable.
Secondly you can try booting to Recovery mode. (with cable out)
As soon as you see that flash hold POWER + VOL UP only until you see recovery mode.

ashyx said:
This will happen if your cable is not connected to both PC and device.
The device needs to detect it is connected to a PC.
I suggest changing the cable.
Secondly you can try booting to Recovery mode. (with cable out)
As soon as you see that flash hold POWER + VOL UP only until you see recovery mode.
Click to expand...
Click to collapse
try next. open odin do set things as ever,(ap,bl,cp,csc) then BEFORE you connect your phone,press vol+,vol-,power button in same time,then connect usb cabel.remember this three buttons must be press in same time when connected with usb.
---------- Post added at 11:57 AM ---------- Previous post was at 11:51 AM ----------
muzammilghani1994 said:
Hey guys,
I just bought the Samsung J4+ (SM-J415F) and now have a dead phone after flashing a firmware. It doesnt turn on. I cannot put it into recovery mode. The screen is always black. This is the order of events:
1. I succesfully flashed twrp + supersu (i followed the steps from this page: https://forum.xda-developers.com/gal...j415f-t3876876)
2. After doing that i had a bootloop.
3. I decided to flash the following rom to get rid of the bootloop: [up_vnROM.net]_J415FXXU1ARIK_J415FOJM1ARIK_EGY_8.1_FULL (https://www.firm-ware.com/2018/10/sa...-download.html)
4. This also worked successfully and i saw the android symbol for a few seconds. However, then the power went off. Now the phone is dead.
It seems like i can turn it on to download mode (screen still black tho) and connect it to odin (odin is recognizing the phone) but if i try to flash again it stucks on "setup connection". I am using odin 3.13.1. Yes I already tried to run odin as administrator but it didnt change anything.
Any ideas how to bring my phone back to life? Any help would be appreciated.
Click to expand...
Click to collapse
when you in download mode and have message "setup connection" dsconnect cable and connect again and try flash.if is not your country firmware then check only ap,bl,cp and csc and try flash.

A7 could not do normal boot, invalid kernel length

Hi everyone, I am having an issue with my a7 phone, when i power on it says
could not do normal boot, invalid kernel length
Click to expand...
Click to collapse
, then i connected the phone to my computer it constantly restarts and says the same thing
could not do normal boot
Click to expand...
Click to collapse
, can't enter into recovery mode, c'ant enter in download mode, even my pc and odin doesn't recognize the device at all, please help I can't afford a new one.
Thanks in advance.

Just flash stock rom with odin, conect to pc pressing vol + and vol - to get download mode

It doesn't react with + - buttons, that is why i can't flash it

What is the last OS you are running?
If the phone keeps restarting, first connect the phone to your PC via USB cable.
Then
1. Keep Vol+ and POWER pressed.
or
2. Keep Vol- and POWER Pressed.

Thank you but it seems that my motherboard is damaged
Thank you but it seems that my motherboard is damaged

I do not think it has been damaged, try pressing vol + vol- boot at the same time a couple of times and then the third release the vol + i the boot and it will restart in dowload mode. then flash with odin each of the partitions of an original rom.
good luck

juliàcarax said:
I do not think it has been damaged, try pressing vol + vol- boot at the same time a couple of times and then the third release the vol + i the boot and it will restart in dowload mode. then flash with odin each of the partitions of an original rom.
good luck
Click to expand...
Click to collapse
vol - and connect the cable, should bot in download mode

Condolences in your A7 brother
Let me explain to you...our phone have "bootclasspath" in its kernel...if this messed up you cannot do recovery or download mode. In short our phone samsung galaxy a7 2018 is hard breaked and good as dead, im sorry brother we shouldnt have messed with our phone...i understands your feelings:crying:

How do I do that?I have a problem with my phone too

dear my galaxy A750F same problem
showing could not do normal boot inval id kenrel length
i pressing vol down and up and plug in cable after press vol up and there showing massage . press vol down and power button but i many time try it's not working .
than i download obin and ap file and try to downloading but its not working and still not solve my problem .
i need your quick response and kind help

I had the same error appear on my S10 (beyond1lte) and was able to get back in to download mode by [Vol down] + Bixby + Power

h4ck3rc1 said:
I had the same error appear on my S10 (beyond1lte) and was able to get back in to download mode by [Vol down] + Bixby + Power
Click to expand...
Click to collapse
yes , plug into pc... odin flash latest twrp md5 for your device that will get you to recovery and start again

sakho1991 said:
Thank you but it seems that my motherboard is damaged
Thank you but it seems that my motherboard is damaged
Click to expand...
Click to collapse
Hello. Did you find a way to boot into your phone or atleast recover the data in the phone?
I am facing the same issue with my A8+ and i really need the data in it.
Please do let me know if you can somehow help.

PiXi_0301 said:
Hello. Did you find a way to boot into your phone or atleast recover the data in the phone?
I am facing the same issue with my A8+ and i really need the data in it.
Please do let me know if you can somehow help.
Click to expand...
Click to collapse
+1

read pit file by any tool , if the tool can read file then reflash phone if the tool can not read pit file the phone has been damaged

Samsung Galaxy A7 (2018) - No Download mode or Recovery and infinite bootloop

Hi,
Recently i was trying to apply another rom to my Samsung Galaxy A7 2018 edition and i am stuck in an infinite bootloop. I cannot enter download mode with the Volume Down and Power keys and the only thing it does is showing the logo of Samsung every 5 seconds and restarts. I have tried to built a usb jig with 300k resistors and still does not boot up in download mode to flash with odin a stock firmware. Also i left the battery to drain and now it is turned off,but when i plug in the usb cable and power it up it still goes into infinite loop. Any help?

I was trying the Android 10 Magisk root for A750F and was greeted by a similar situation after ODIN rebooted my phone after flashing Magisk image.. Anyways, don't panic, try all combination of buttons. vUP,vDN,PWR or vUP,PWR or vUP,vDWN while connected to usb.. It wasn't working for me too but i tried all combinations and it landed me to download mode where I flashed the stock rom

just press those button and connect to usb

im glad i read his, had just the same issue while flashing wrong twrp on A750FN .. yihey thx budies

how did you solve this issue.
---------- Post added at 06:54 AM ---------- Previous post was at 06:45 AM ----------
which button combination helped you. I having a similar issue. can not enter download mode.

Solution that helped me
Just Press the volume plus + volume minus + power button at once. Once the phone reboot black screen appears, Leave the power button and keep pressing the volume plus and volume minus button. It will redirect to the download mode. and reflash the room using Odin. Only use official sammobile rom file as other files may be corrupted. The issue may arise. The problem is in rom.
If any issue query me at : [email protected].

try this bro
Tantalord said:
Hi,
Recently i was trying to apply another rom to my Samsung Galaxy A7 2018 edition and i am stuck in an infinite bootloop. I cannot enter download mode with the Volume Down and Power keys and the only thing it does is showing the logo of Samsung every 5 seconds and restarts. I have tried to built a usb jig with 300k resistors and still does not boot up in download mode to flash with odin a stock firmware. Also i left the battery to drain and now it is turned off,but when i plug in the usb cable and power it up it still goes into infinite loop. Any help?
Click to expand...
Click to collapse
do one thing hold volume + and volume - buttons toggether and connect your phone to pc while holding v+ and v- buttons your phone redirect to download mode without any other logo/animation :good:

zebby12 said:
I was trying the Android 10 Magisk root for A750F and was greeted by a similar situation after ODIN rebooted my phone after flashing Magisk image.. Anyways, don't panic, try all combination of buttons. vUP,vDN,PWR or vUP,PWR or vUP,vDWN while connected to usb.. It wasn't working for me too but i tried all combinations and it landed me to download mode where I flashed the stock rom
Click to expand...
Click to collapse
icodix said:
just press those button and connect to usb
Click to expand...
Click to collapse
ikram.senguen said:
im glad i read his, had just the same issue while flashing wrong twrp on A750FN .. yihey thx budies
Click to expand...
Click to collapse
simonastani21 said:
Solution that helped me
Just Press the volume plus + volume minus + power button at once. Once the phone reboot black screen appears, Leave the power button and keep pressing the volume plus and volume minus button. It will redirect to the download mode. and reflash the room using Odin. Only use official sammobile rom file as other files may be corrupted. The issue may arise. The problem is in rom.
If any issue query me at : [email protected].
Click to expand...
Click to collapse
I have tried keeping all 3 buttons (vol up + vol down + power), tried holding vol up + vol down and then connecting to my PC (nothing happens, I always see the same screen (SAMSUNG Galaxy A7 Secured by Knox and Powered by android underneath)).
Tried vUP,vDN,PWR or vUP,PWR or vUP,vDWN while connected to PC via USB.
Tried vUP,vDN,PWR or vUP,PWR or vUP,vDWN while NOT connected to PC via USB.
Phone sometimes reboots but always gets into the screen I mentioned above.
Odin, obviously, doesn't see the phone either.
Also, adb devices command deosn't show the device in the list.
Anything else I should try?

Ah I solved it, and nobody mentions that you have to be SUPER quick!?
So you hold down vol down + power button and keep the USB cable at hand and the millisecond your phone reboots, reeeealy quickly release vol down and power and quickly afterwards press vol down + vol up and again quickly plug in your USB cable, if you did it before the Samsung logo appears you will get into Downloading... screen.

androidBanana said:
Ah I solved it, and nobody mentions that you have to be SUPER quick!?
So you hold down vol down + power button and keep the USB cable at hand and the millisecond your phone reboots, reeeealy quickly release vol down and power and quickly afterwards press vol down + vol up and again quickly plug in your USB cable, if you did it before the Samsung logo appears you will get into Downloading... screen.
Click to expand...
Click to collapse
haha nice. we have different procedures though.

simonastani21 said:
Solution that helped me
Just Press the volume plus + volume minus + power button at once. Once the phone reboot black screen appears, Leave the power button and keep pressing the volume plus and volume minus button. It will redirect to the download mode. and reflash the room using Odin. Only use official sammobile rom file as other files may be corrupted. The issue may arise. The problem is in rom.
If any issue query me at : [email protected].
Click to expand...
Click to collapse
doesn't work for me

Tantalord said:
Hi,
Recently i was trying to apply another rom to my Samsung Galaxy A7 2018 edition and i am stuck in an infinite bootloop. I cannot enter download mode with the Volume Down and Power keys and the only thing it does is showing the logo of Samsung every 5 seconds and restarts. I have tried to built a usb jig with 300k resistors and still does not boot up in download mode to flash with odin a stock firmware. Also i left the battery to drain and now it is turned off,but when i plug in the usb cable and power it up it still goes into infinite loop. Any help?
Click to expand...
Click to collapse
just plug it to ur pc while pressing vol up + down, works for me

sagar81307 said:
try this bro
do one thing hold volume + and volume - buttons toggether and connect your phone to pc while holding v+ and v- buttons your phone redirect to download mode without any other logo/animation :good:
Click to expand...
Click to collapse
Hello sir, I just want to thankyou alot this fixed my problem. I tried to install a android 13 gsi rom that I saw was compatible with my phone but the after I installed it had some bugs and I restarted my phone to go to download mode and flash a backup I had but the phone went into a bootloop with in to the recovery(i was using pbrp) and I couldnt get into download mode even to flash my stock rom. after I saw you post I tried it and it took me in to a screen that was saying you system has been corrupted and asked me if I wanted to go to download mode and said yes and flashed my rom and everything is working now
Thank you Again

latest sm-n9860 Snapdragon update

latest up date arrived but seems to have screwed up the phone abit
can't get in to download mode.... or to screen to wipe cache....
anyone else?

edwardob said:
latest up date arrived but seems to have screwed up the phone abit
can't get in to download mode.... or to screen to wipe cache....
anyone else?
Click to expand...
Click to collapse
Same here, no joy ....

Hope you are doing it correctly to go to download mode:
When your comp is on, connect one end the USB C cable to your comp , turn off phone, press & hold volume up & down buttons together, connect the other end of the cable to the phone. When the warning screen appears, press volume up.
It's been like this for sometime now(starting with S20 series).

Virgo_Guy said:
Hope you are doing it correctly to go to download mode:
.
Click to expand...
Click to collapse
Thank you, that worked well...silly me ..nevertheless how to boot into bootloader (recovery)?

dublinz said:
Thank you, that worked well...silly me ..nevertheless how to boot into bootloader (recovery)?
Click to expand...
Click to collapse
Turn off. Press & hold volume up and sidekey together and release when Samsung screen appears. Will take you to recovery.

Virgo_Guy said:
Turn off. Press & hold volume up and sidekey together and release when Samsung screen appears. Will take you to recovery.
Click to expand...
Click to collapse
Thank you for your help, thought no joy with recovery

dublinz said:
Thank you for your help, thought no joy with recovery
Click to expand...
Click to collapse
yes recovery is a problem.

edwardob said:
yes recovery is a problem.
Click to expand...
Click to collapse
Guys anyone found out how to get into recovery mode
---------- Post added at 02:18 AM ---------- Previous post was at 02:14 AM ----------
Nevermind, fixed it
Just downloaded - https://www.tenorshare.com/android/samsung-recovery-mode.html

inningsdefeat500 said:
Guys anyone found out how to get into recovery mode
---------- Post added at 02:18 AM ---------- Previous post was at 02:14 AM ----------
Nevermind, fixed it
Just downloaded - https://www.tenorshare.com/android/samsung-recovery-mode.html
Click to expand...
Click to collapse
recovery mode works without external apps...... just use normal method with phone connected to a computer
vol up + start connected to pc

edwardob said:
recovery mode works without external apps...... just use normal method with phone connected to a computer
vol up + start connected to pc
Click to expand...
Click to collapse
ya figured it later myself