MICROMAX FUNBOOK ALPHA ALL THINGS THREAD
ROOT YOUR FUNBOOK ALPHA EASIEST WAY
DOWNLOAD SUPER ONE CLICK ROOT FROM HERE http://superoneclick.en.malavida.com/
ENABLE USB DEBBUGING in settings/developer options
connect yor tablet to pc click the root button
it takes a couple of minutes restart your funbook alpha and enjoy
if it says any error install
java jdk from here http://www.oracle.com/technetwork/java/javase/downloads/index.html
and android sdk from here http://developer.android.com/sdk/index.html
unroot your funbook alpha
follow above process instead of root click unroot enjoy
CWM FOR FUNBOOK ALPHA
WHAT ROOTING A DEVICE MEAN WITHOUT CWM
SO HERE IS CWM FOR MICROMAX FUNBOOK ALPHA
First download novatools from here http://www.mediafire.com/?3wln4u1geo1g1vs
and cwm recovery from here http://www.mediafire.com/?t3ctcths6r2229q
make sure you have extracted the zip
now place the img in root of external sd card [some users reporting problems if placed in internal sd card]
access the cwm recovery by pressing volume up and power key
Note:there is no back button because alpha doesnt have physical keys
after cwm back up go to backupformat hold the power key your alpha will reboot
credits:willing magic
please hit thanks it took 4 hours for searching and pasting these information
MICROMAX FUNBOOK ALPHA ROMS
JELLYBEAN ROM FOR MICROMAX FUNBOOK ALPHA
LINK http://forum.hackmyandroid.com/f31/[rom][funbook]cyanbook-jellybean-edition-v-1-[11-09-2012]-240/
PRO A13 ROM http://www.androidtablets.net/forum...eneric-7-a13-android-4-0-4-hyper-edition.html
CYANOGEN MOD FOR FUNBOOK ALPHA
http://forum.xda-developers.com/showthread.php?p=31368415
STOCK ROM
LINK http://www.androidtablets.net/forum...eric-7-a13-android-4-0-4-hyper-edition-3.html
jellybean rom working awesome http://www.techknow.t0xic.nl/forum/index.php?topic=4595.0 (will shortly mirror it )
cm 10 for our alpha http://www.freaktab.com/showthread....02c-amp-PMIC703-CM10-Jelly-Bean-Compatibility
alphadroid rom http://www.mediafire.com/?8e7p9e7bcopoazw
tried the above roms did any mistake and bricked your device thinking of giving it to service center not needed here you
go follow this post and your tab is once again alive
http://funbook.gizmolord.com/installing-clean-android-ics-on-micromax-funbook/
please hit thanks it took almost 4hrs for writing this post
please hit thanks it took almost 4hrs for wirting this post pls it doesnt cost you
alternate method for rooting very easy
Steps :
1. download file from here (Bin4ry)
http://*******/HSpiK
2. Now download adb drivers. you can get the package by searching for 'adb drivers'
check http://forum.xda-developers.com/show....php?t=1662082 for more info
3. after you have installed it , go to the settings
Tick these 'Security -> unknown sources' and 'Developer options-> USB debugging'
4. Connect the device simply to pc usb port , do not turn on usb storage in device , just connect and keep it . In the device you can see 'usb debugging' in the bottom right corner after connecting
5. Now extract the zip file downloaded earlier , that is , the Bin4ry
6. Run 'RunMe.bat'
7. now type '1' and press enter
8. Now some things come writing like 'pushing busybox , super su' something like that
9. after some time it will say to click restore on device.
10. now look at the device and we can see that there two options , restore data and dont restore.
11. Click restore data.
12.wait some time and the device will restart
13.Now on the computer screen we can see that the successfully installed message.
14. Now to check whether you have rooted correctly , install 'root checker' from play store on the device and run it and click check or verify.
15. Boom !! It says device is rooted
16. Or just simply check your device's application area for 'SuperSU' application . If it is there , you have rooted correctly otherwise something have gone wrong. Just redo the steps it is simple. (please check whether you have installed adb drivers correctly)
reserved for something just for precaution creating these reserved post caust newbies will waste time searching whole thread
hey can anyone help me in rooting my phone Micromax A110
1) Download the flash tools from anywhere preferably most updated one: SP_Flash_Tool_v3.1224.01
2) Download the recovery and Sotck ROM provided by OP
3) In your desktop / laptop please ensure you allow installation of unsigned drivers (youtube will help for this)
4) Download and install MTK6577 Drivers for your device (this will only work after you clear step 3)
5) If still not working, download USBDEVIEW (usb driver remover) and run it as "Administrator" uninstall all the USB drivers relevant to your device.
6) Now connect your phone, with portable media option selected in USB. Let it install and finish
7) Once done switch-off your phone while it is connected through USB (Again this will install a driver which will look like MTK65xx something...
8) Remove the battery of phone let your PC install the driver again (battery not plugged in). You will see for a shot time that charging icon will appear on phone and disappear
10) To confirm this, put your battrey again back in your phone with USB (still) connected to PC
11) To confirm this again, go to system manager and look for MTK 6577 something ... something...
12) Now disconnect your phone and switch it on
13) Start the flash tool
14) Select the Scatter loading file from Stock ROM folder
15) Click Firmware download / upgrade
16) Connect your phone (which i assume is switched on), once you connect switch it off (no need to remove battery or anything)
17) Look at the status bar of your flash tool (nothing to worry, no need to do anything)
18) RED Bar -> Yellow Bar -> Green Ring ( this process of flashing the entire new stock ROM should take not more than 2 - 3 minutes )
19) Disconnect
20) Reboot
21) You are on new Update
The same procedure you can apply for flashing the CMW / TWRP Recovery. Or if you do not want to re-do the procedure, simply replace the stock recovery.img with TWRP / CMW / LEWA recovery.img whichever you like; in this way you do not repeat the process of flashing custom recovery
I believe you must have the idea how to flash the Super user after this in case you wana root your phone.
Hit thanks if i helped
Sent from Micromax A110 ( Canvas 2 )
maddyrokieasta said:
1) Download the flash tools from anywhere preferably most updated one: SP_Flash_Tool_v3.1224.01
2) Download the recovery and Sotck ROM provided by OP
3) In your desktop / laptop please ensure you allow installation of unsigned drivers (youtube will help for this)
4) Download and install MTK6577 Drivers for your device (this will only work after you clear step 3)
5) If still not working, download USBDEVIEW (usb driver remover) and run it as "Administrator" uninstall all the USB drivers relevant to your device.
6) Now connect your phone, with portable media option selected in USB. Let it install and finish
7) Once done switch-off your phone while it is connected through USB (Again this will install a driver which will look like MTK65xx something...
8) Remove the battery of phone let your PC install the driver again (battery not plugged in). You will see for a shot time that charging icon will appear on phone and disappear
10) To confirm this, put your battrey again back in your phone with USB (still) connected to PC
11) To confirm this again, go to system manager and look for MTK 6577 something ... something...
12) Now disconnect your phone and switch it on
13) Start the flash tool
14) Select the Scatter loading file from Stock ROM folder
15) Click Firmware download / upgrade
16) Connect your phone (which i assume is switched on), once you connect switch it off (no need to remove battery or anything)
17) Look at the status bar of your flash tool (nothing to worry, no need to do anything)
18) RED Bar -> Yellow Bar -> Green Ring ( this process of flashing the entire new stock ROM should take not more than 2 - 3 minutes )
19) Disconnect
20) Reboot
21) You are on new Update
The same procedure you can apply for flashing the CMW / TWRP Recovery. Or if you do not want to re-do the procedure, simply replace the stock recovery.img with TWRP / CMW / LEWA recovery.img whichever you like; in this way you do not repeat the process of flashing custom recovery
I believe you must have the idea how to flash the Super user after this in case you wana root your phone.
Hit thanks if i helped
Sent from Micromax A110 ( Canvas 2 )
Click to expand...
Click to collapse
can you give me the drivers
poran123 said:
can you give me the drivers
Click to expand...
Click to collapse
That method is not for rooting....
It is installing ROM
Go to this link
Or Better go thru this thread all things for a110
Sent from my A110 using xda app-developers app
At last found the way to flash our phones with "Windows 8 x64"
I flashed my CHD with 4.2.1 orginal stock fw in the following steps:-
1) download Usbdeview
http://www.mediafire.com/download/41i2k36yyi1fzhz/usbdeview-x64.zip
2) unistall all the MTK65xx drivers u get in it (remember to use this as admin)
3)Reboot ur PC
4)Download Sp drivers for win8
http://www.mediafire.com/download/7yee2of64nhl947/SP_Drivers_v1.4.rar
5)Now open Device manager (right click on My Computer>Manage>Device manager)
6)Remove the battery and connect the phone via USB u will see unknown device in device manager and then MTK65xx Preloader
7)Quickly Right click on the MTK65xx preloader and update driver go for manual and then give the path for sp tools and just select the folder inside SP tools
8) u will c dialouge box asking for installing here select install anyway
9)and u r done.. u will here sound of disconnected device
10)connect again and u will c your device appearing and dissapearing on COM ports
11) Now open sp flash tools use this 1
http://www.mediafire.com/download/wd8au297r6w9qzd/SP_Flash_Tool_v3.1304.0.119.rar
12)dont forget to open sp tools in admin mode..
13) select the scatter file and make sure u have disconnected ur phone
14) select USB in options and force to high speed
15) Press Firmware Upgrade and then insert USB cable to ur phone
16) Sit back for 5-6 min until u c a green circle on ur screen.
as soon as u see green circle just remove the USB cable and plug in ur battery and boot your mobile
Digital signature error
when i try to install the drivers through your procedure it shows an error that the third party inf does not contain digital signature information
Not able to update A116 4.2.1 on Win8 x64
Tried numerous times. I Above mentioned procedure does not work! Certificate error shows up!
It did work. Thanks. The preloader will really disappear but as you use the flash tool it will automatically detect the driver.
Hello All!
As You people know i always post things for QMobile A2 users but today i am posting for QMobile A4 bolt users
I was receiving messages nd also peoples were posting nd asking on the page that to how to root this A4 bolt !!!
Dear QMobile A4 bolt users ur prob is now solved & em here to get ur phone rooted nd cwm recovery installed!!!
This method is not checked by me nor any a4 bolt users but this method is checked by users of A4 clone phone!! nd this method is also i took from clone phones thread so full credit to them but also me to gather the info nd mix them in 1 thread coz i hv gathered this info from diifernet blogs! nd some info is by me!!
WARNING!!!
I am not responsible for any brick or broken hearts so dont blame me in any case!!
EDIT
The Below method is 100% working nd checked. Also the below method of rooting is working for a2 bolt lite too!!
prove
Root Method
REQUIREMENTS
1 QMobile A4 bolt
2 Orignal data cable
3 Moroboro pc suite for installing drivers automatically| DOWNLOAD IT
4 Unlock root |DOWNLOAD
5 this is optional if unlock root will not work then use it for rooting! srsroot |DOWNLOAD
6 A brain
Procedure
1) Attach your phone to the computer and turn on usb debbuging from Settings>applications>development>USB Debugging ...windows will try finding the drivers for it named e56 and will oviously fail..
2) Start moborobo pc suite.. it will search for devices and will auto install the drivers for your phone.
3) Disconnect the phone and exit the moborobo pc suite. exit it from status bar dont just close it.
4) Connect the phone again and start Unlockroot or srs root..
5) Click on the root button..Unlockroot will automatically search for the device(Named E56). Select it.
6) The rooting process will start and your phone will be rebooted. and you will see the SuperSu app in the app drawer.
NOW AFTER ROOTING ,
Install Clockworkmod Recovery
REQUIREMENTS
1 A brain
2 ADB pACKAGE |DOWNLOAD
3 QUICK BOOT |install it on ur phone via play store
4 CWM recovery | DOWNLOAD
Procedure
1) Now Extract the ADB package in your Pc root drive (Basically the root drive is C: drive )
2) Download the Recovery from above
3) Extract the ADB package & you will get an adb folder. Now put the Recovery.img downloaded above in that adb folder.
4) Now Enable USB debugging in your phone by going to Settings->Development->USB Debugging (Skip this step if it is already enabled)
5) Now Download the Quick Boot App from above & install it in your Mobile. Open that App & click on Bootloader option.
6) After sometime your phone will get stuck at the logo. (don’t panic)
7) Connect your phone to PC using USB cable.
8) Now open the adb folder & inside that folder press & hold the Shift key + right click on blank space & choose Open Command Window Here.
9) Now a black cmd window will open, there type fastboot devices
Note :- This should display your device name in Fastboot mode, if nothing is shown, then you have to Follow this to install adb drivers
10) Now Type fastboot flash recovery recovery.img
Within a sec the process will get over & it will install the cwm recovery img on your QMobile A4 Bolt
Now you can check whether your CWM is working or not:-
Remove battery of your phone and reinsert.
Press Power and Volume Up key to boot into recovery mode.
If it get booted into recovery mode then it mean you have successfuly installed it, if not then try the process again.
ENJOY QMobile A4 bolt users , now u hv rooted & cwm recovery installed!
DONT copy this method to other blogs nd websites!!
Qmobile A4 Bolt users HIT that THANKS button because i deserve that!!
I could not enter the bootloader mode through quikboot aap on my Bolt a2 lite,,,,however i have rooted it successfully.... kindly let me know to install CWM???
SP Flash Tool GuideFeatures:
Revives your phone from almost any brick!
Fixes the WiFi and Bluetooth (only software problem), created due to some wrong permissions.
Flash CWM Recovery
Flash Custom ROMs
Root your device without a root exploit.
Requirements (click on softwares below to download):
SP Flash Tool
Micromax Canvas 4/HD Drivers (NEW!) (Windows 8.1/8/7/Vista 64-bit) [NEED TO DISABLE DRIVER SIGNATURE ENFORCEMENT] ||| Others (for 32bit Windows)
Micromax Canvas
Micro USB Cable
Windows PC/Laptop
Procedure (for flashing Firmwares):
Download all (software) requirements to a folder
Download the files/folder to be flashed to a folder ( Here is the Stock ROM for Canvas 4: Mod Edit...PPC Click Removed )
Extract it to a folder (this is the extracted firmware for this guide)
Install drivers & extract SP Flash Tool to a folder
Open Flash_tool.exe
Click Scatter-loading
Select MT6589_Android_scatter_emmc.txt (for Canvas 4) found in extracted firmware
Click Download button or press F9
Shutdown your Canvas 4 and connect it with Micro USB to PC running the Flash Tool
See it flashing before your eyes and wait for a green circle to show up on your PC to indicate successful flashing.
Restart phone and Done!
To be added:
Screenshots.
RESERVEd
If you are facing the same or similar problems as this:
ManoharMaddineni said:
I'm currently on MIUI, I want to switch back to the sock rom of Canvas 4.
I tried following the tutorials
here : http://kalyani-786.blogspot.com/2013...n-one-rom.html
and here : http://forum.xda-developers.com/show....php?t=2466694
but I had the same issue both times.
When I connect the phone (switched off) it connects (I can hear the sound) and then disconnects (again the sound) and starts charging.
I used the PdaNet+ drivers, the drivers of canvas hd (a116), and many others (Names of all the drivers further below the thread)
I tried using a different cable,removing the battery, different USB ports, multiple PC's, and 64bit versions of Windows 7, and windows 8/8.1, still, had the same issue..
Can someone tell me what I'm doing wrong?
What I did :
Open the SP flash tool (with admin permissions)
Load the scatter file
Check the box that says 'DA DL All With Check Sum'
Hit download
Connect the phone (switched off)
Now the issue starts, it connects, then disconnects, and starts charging.
The flash tool, it just keeps on searching for my phone.
Other Drivers I tried :
Micromax A116&A240 Drivers (from XDA)
a116_driver (from Micromax India download section)
AdbDriverInstaller (from XDA)
MTK6589_PdaNET_ADB_VCOM_Drivers (from the first tutorial link above)
PDAnet_4150 (from PDA website)
PdaNetA4126 (from PDA website)
MyPhoneExplorer_Setup_1.8.5 (someone referred)
Click to expand...
Click to collapse
Then this is definitely a driver problem...
If you tried multiple drivers then post your OS and problem here and help will be there at your rescue...
this will work for other unbranded device?
Yash98 said:
SP Flash Tool GuideFeatures:
Revives your phone from almost any brick!
Fixes the WiFi and Bluetooth (only software problem), created due to some wrong permissions.
Flash CWM Recovery
Flash Custom ROMs
Root your device without a root exploit.
Requirements (click on softwares below to download):
SP Flash Tool
Micromax Canvas 4/HD Drivers
Micromax Canvas
Micro USB Cable
Windows PC/Laptop
Procedure (for flashing Firmwares):
Download all (software) requirements to a folder
Download the files/folder to be flashed to a folder ( Here is the Stock ROM for Canvas 4: http://www.tusfiles.net/agbdwr69sc8s )
Extract it to a folder (this is the extracted firmware for this guide)
Install drivers & extract SP Flash Tool to a folder
Open Flash_tool.exe
Click Scatter-loading
Select MT6589_Android_scatter_emmc.txt (for Canvas 4) found in extracted firmware
Click Download button or press F9
Shutdown your Canvas 4 and connect it with Micro USB to PC running the Flash Tool
See it flashing before your eyes and wait for a green circle to show up on your PC to indicate successful flashing.
Restart phone and Done!
To be added:
Screenshots.
Click to expand...
Click to collapse
I'm currently on MIUI, I want to switch back to the sock rom of Canvas 4.
I tried following the tutorials
here : http://kalyani-786.blogspot.com/2013/12/micromax-canvas-4-a210-all-in-one-rom.html
and here : http://forum.xda-developers.com/showthread.php?t=2466694
but I had the same issue both times.
When I connect the phone (switched off) it connects (I can hear the sound) and then disconnects (again the sound) and starts charging.
I used the PdaNet+ drivers, the drivers of canvas hd (a116), and many others (Names of all the drivers further below the thread)
I tried using a different cable,removing the battery, different USB ports, multiple PC's, and 64bit versions of Windows 7, and windows 8/8.1, still, had the same issue..
Can someone tell me what I'm doing wrong?
What I did :
Open the SP flash tool (with admin permissions)
Load the scatter file
Check the box that says 'DA DL All With Check Sum'
Hit download
Connect the phone (switched off)
Now the issue starts, it connects, then disconnects, and starts charging.
The flash tool, it just keeps on searching for my phone.
Other Drivers I tried :
Micromax A116&A240 Drivers (from XDA)
a116_driver (from Micromax India download section)
AdbDriverInstaller (from XDA)
MTK6589_PdaNET_ADB_VCOM_Drivers (from the first tutorial link above)
PDAnet_4150 (from PDA website)
PdaNetA4126 (from PDA website)
MyPhoneExplorer_Setup_1.8.5 (someone referred)
ManoharMaddineni said:
I'm currently on MIUI, I want to switch back to the sock rom of Canvas 4.
I tried following the tutorials
here : http://kalyani-786.blogspot.com/2013/12/micromax-canvas-4-a210-all-in-one-rom.html
and here : http://forum.xda-developers.com/showthread.php?t=2466694
but I had the same issue both times.
When I connect the phone (switched off) it connects (I can hear the sound) and then disconnects (again the sound) and starts charging.
I used the PdaNet+ drivers, the drivers of canvas hd (a116), and many others (Names of all the drivers further below the thread)
I tried using a different cable,removing the battery, different USB ports, multiple PC's, and 64bit versions of Windows 7, and windows 8/8.1, still, had the same issue..
Can someone tell me what I'm doing wrong?
What I did :
Open the SP flash tool (with admin permissions)
Load the scatter file
Check the box that says 'DA DL All With Check Sum'
Hit download
Connect the phone (switched off)
Now the issue starts, it connects, then disconnects, and starts charging.
The flash tool, it just keeps on searching for my phone.
Other Drivers I tried :
Micromax A116&A240 Drivers (from XDA)
a116_driver (from Micromax India download section)
AdbDriverInstaller (from XDA)
MTK6589_PdaNET_ADB_VCOM_Drivers (from the first tutorial link above)
PDAnet_4150 (from PDA website)
PdaNetA4126 (from PDA website)
MyPhoneExplorer_Setup_1.8.5 (someone referred)
Click to expand...
Click to collapse
Here this is the answer to everything: http://www.tusfiles.net/7z4wk4m92et5
++++
Also this: http://forum.xda-developers.com/showthread.php?t=2180436
badagila said:
this will work for other unbranded device?
Click to expand...
Click to collapse
Yep for every goddamn MTK device this is.
Yash98 said:
Yep for every goddamn MTK device this is.
Click to expand...
Click to collapse
what about on 3t technology tab? are familiar with it?
Yash98 said:
Here this is the answer to everything: http://www.tusfiles.net/7z4wk4m92et5
++++
Also this: http://forum.xda-developers.com/showthread.php?t=2180436
Click to expand...
Click to collapse
My phone just keeps disconnecting and re connecting to the PC when I try to connect it with the battery, sim, and sd card taken out. (also holding the vol+ button)
Also, can you upload the file to mediafire? TrustFiles has a lot of **** between the file and the user...
CHECK OUT THE NEW WIN 8.1/8/7 64 bit DRIVERS DIRECT BACKUP FROM A WORKING WIN8.1 64BIT INSTALL
BUT MAKE SURE TO: Disable Driver Signature Enforcement (google it exactly like this for instructions)
NOTE: This may show an attention mark in Device Manager. Completely ignore that!
Yash98 said:
If you are facing the same or similar problems as this:
Then this is definitely a driver problem...
If you tried multiple drivers then post your OS and problem here and help will be there at your rescue...
Click to expand...
Click to collapse
I tried this on windows 7, and windows 8.
ManoharMaddineni said:
I tried this on windows 7, and windows 8.
Click to expand...
Click to collapse
Try this driver, now this driver comes from a backup from my Windows 8.1 Pro 64Bit install and should work on your Win8 64bit too,
though you HAVE to disable Driver Signature Enforcement (google it) or else it won't install..
https://mega.co.nz/#!AQwnVapB!ZaC53xZxSoG8dwRqLZFKguXvJJVuEshc4JPtz5yZYGs
can u say a flash tool for micromax a111?? is this flash tool can be used for micromax a111 doodle which is of same msm8225q chipset number ??
Yash98 said:
If you are facing the same or similar problems as this:
Then this is definitely a driver problem...
If you tried multiple drivers then post your OS and problem here and help will be there at your rescue...
Click to expand...
Click to collapse
Tried the new drivers, not working either. my phone just keeps charging. the flashing process does not start what so ever,,,
hi yash98
I have two phone
one is soft bricked and one is working
there is no ROM available anywhere for this phone
is it possible to extract the rom from the working phone and use it to flash to the bricked phone?
any tutorial on how to do this?
thank you
Urgent help required
Yash98 said:
SP Flash Tool GuideFeatures:
Revives your phone from almost any brick!
Fixes the WiFi and Bluetooth (only software problem), created due to some wrong permissions.
Flash CWM Recovery
Flash Custom ROMs
Root your device without a root exploit.
Requirements (click on softwares below to download):
SP Flash Tool
Micromax Canvas 4/HD Drivers (NEW!) (Windows 8.1/8/7/Vista 64-bit) [NEED TO DISABLE DRIVER SIGNATURE ENFORCEMENT] ||| Others (for 32bit Windows)
Micromax Canvas
Micro USB Cable
Windows PC/Laptop
Procedure (for flashing Firmwares):
Download all (software) requirements to a folder
Download the files/folder to be flashed to a folder ( Here is the Stock ROM for Canvas 4: Mod Edit...PPC Click Removed )
Extract it to a folder (this is the extracted firmware for this guide)
Install drivers & extract SP Flash Tool to a folder
Open Flash_tool.exe
Click Scatter-loading
Select MT6589_Android_scatter_emmc.txt (for Canvas 4) found in extracted firmware
Click Download button or press F9
Shutdown your Canvas 4 and connect it with Micro USB to PC running the Flash Tool
See it flashing before your eyes and wait for a green circle to show up on your PC to indicate successful flashing.
Restart phone and Done!
To be added:
Screenshots.
Click to expand...
Click to collapse
have canvas 4 a210 problem with imei ( at command send fail) which occurred at changing rom, some on adviced sp flash
but cant use pc since there was charging hardware problem hence usb port cant be used hardware problem ( charging via external battery charging taken out) . need SP tool from sd card if available
thanks
@jjwaiting4u Currently impossible only through Micro USB port possiblity
help needed
yash got my phone repaired
there was no problem except rain water that had shorted, cleaning the components helped
well
downloaded sptool from another place (your having problem) ,mt 6589 scatter files, recover.imp
connected : usb in off mode... loaded scatter and recover file.......... clicked down load .................nothing
there is something i am not doing right....( PLease note only recovery and boot is with path others dont have any)
thanks for help rendered
jj
big mess
Yash98 said:
SP Flash Tool GuideFeatures:
Revives your phone from almost any brick!
Fixes the WiFi and Bluetooth (only software problem), created due to some wrong permissions.
Flash CWM Recovery
Flash Custom ROMs
Root your device without a root exploit.
Requirements (click on softwares below to download):
SP Flash Tool
Micromax Canvas 4/HD Drivers (NEW!) (Windows 8.1/8/7/Vista 64-bit) [NEED TO DISABLE DRIVER SIGNATURE ENFORCEMENT] ||| Others (for 32bit Windows)
Micromax Canvas
Micro USB Cable
Windows PC/Laptop
Procedure (for flashing Firmwares):
Download all (software) requirements to a folder
Download the files/folder to be flashed to a folder ( Here is the Stock ROM for Canvas 4: Mod Edit...PPC Click Removed )
Extract it to a folder (this is the extracted firmware for this guide)
Install drivers & extract SP Flash Tool to a folder
Open Flash_tool.exe
Click Scatter-loading
Select MT6589_Android_scatter_emmc.txt (for Canvas 4) found in extracted firmware
Click Download button or press F9
Shutdown your Canvas 4 and connect it with Micro USB to PC running the Flash Tool
See it flashing before your eyes and wait for a green circle to show up on your PC to indicate successful flashing.
Restart phone and Done!
To be added:
Screenshots.
Click to expand...
Click to collapse
Hi yash bhai
things are going from bad to worst but i am not giving up.....so need U
as per your post even can can unbrick canvas4 ....
while using sp too; i used format ( to factory format)
now nothing happens ( pressing down Vol +/_ and power ) cant go into recovery
please help.....
will be great full ( have canvas 4 stock rom downloaded)........?
Driver problem solved
I had the same problem, phone connecting then disconnecting.
Here is a solution for the problem.
1. Install latest drivers
2. Disconnect phone
3. Open SP Flash Tool
4. Select Scatter-loading and select the files required
4. Now here is the trick, in SP Flash Tool, go to ACTION > DOWNLOAD
5. Connect the phone (which should be switched off)