Database Info

Rooting Micromax Funbook easiest way!!!!

This is the method to root Micromax Funbook & install CWM recovery.
1) Download the attachment funbook.rar
2) Extract it , it contains CWM recovery & CWM-SuperSU.zip two .rar files
3) Extract CWM recovery to desktop & connect your funbook via usb
4) If the device is not detected then install the ADB driver in the attachment
5) open CWM recovery run Recovery-Install.bat
it has 3 option select 1 to install CWM recovery
select 2 to reboot into recovery
select 3 to quit.
6) then move CWM-SuperSU.zip to internal sd of funbook
7) boot into CWM recovery by pressing menu button & power button simultaneously.
8) select install zip from internal sd card & select the CWM-SuperSU.zip & press power button, select yes to continue.
now you are Rooted
Before installing any custom rom perform a NANDROID backup.
This method is successfully tested by me however use this at your own risk!

How exactly is CWM recovery supposed to be installed on the tablet?

just run the Recovery-Install.bat with micromax funbook connected & ADB driver installed on your computer, it will autometically install CWM recovery on your funbook.

Funbook is Pre-Rooted. No Need to root it again.

Thank You
Thank You..
I Love you...

not working
Its say system remount failed, could not copy recovery image
Please help me I want to install custom rom ,
I am using micromax funbook

Make sure ADB driver for ur funbook installed on ur computer, otherwise install ADB and try again, This method is tested by me successfully working.Don't forget to hit Thanks Button it won't cost u any thing.

pls help
when i run recovery-install.bat
permission denied can somone pls help

I am Getting The following error
remount failed: Operation not permitted
failed to copy 'recovery.img' to '/data//recovery.img': Permission denied
/system/bin/sh: cannot create /dev/block/nandg: Permission denied

Problem with installation of CWM on Funbook
I was also trying to install CWM recovery on my funbook. I have already installed SUPERUSER app and updated SU binary.
I am getting below error while running recovery-install:-
* daemon not running. starting it now *
* daemon started successfully *
failed to copy ‘recovery.img’ to ‘/data//recovery.img’: Permission denied
/system/bin/sh: cannot create /dev/block/nandg: Permission denied
Kindly help in this case.

help me
dushmanta.bgh said:
Make sure ADB driver for ur funbook installed on ur computer, otherwise install ADB and try again, This method is tested by me successfully working.Don't forget to hit Thanks Button it won't cost u any thing.
Click to expand...
Click to collapse
sir i want to add custome rom jetmod 5.0.1 in my micromax funbook but after installing it process says sucess and then it stucks on FUNBOOK LOGO so, pls tell me how could i solve it

JetMOD 5.0.1 stuck on Funbook logo, u may tru FunSeries or CyanBook for micromax funbook.Hit Thanks button

For all having problems in installing I found this on thinkk digit forums... Maybe this will help you:
INSTALLING CUSTOM RECOVERY
1. Download CWM Recovery 5 ICS.zip
2. Extract it.
These are the requirements fo Flash CWM...
- tablet must be running Android ICS version (4.0.x)
- tablet must have Superuser installed with SU binary loaded
- tablet must have Debugging enabled (ADB drivers included)
Your Funbook is Pre-Rooted, so we'll just proceed with installing Superuser App from Market
3. Go to Play Store and download Superuser.
4. Go to Superuser App > Settings > Su Binary > Install the Binary
5. Reboot.
Now we'll enable USB Debugging
6. Go to Settings > Developer Options > Turn On USB Debugging.
Now we'll increase the screen timeout to prevent screen from getting turned off in the middle of these procedures
7. Go to Settings > Display > Select Never at Sleep.
8. So now connect the USB Cable to your PC and Funbook and you should see USB Debugging Connected notification.
At this point, if this is your first time, you may see Windows trying to find Drivers which will fail ofcourse. Go to Device Management [Press Windows Key + R > Type devmgmt.msc] > Right Click on Unknown Devices > Update Driver Software > Browse My Computer for Driver Software > Both 64bit [Drivers-AllwinnerA10-64bits] and 32bit [Drivers-AllwinnerA10-32bits] Drivers are provided there within a folder named ADB_Drivers under the Recovery Package, so just browse them according to your OS Specification. A screen may appear up saying "The Publisher of this Driver could not be verified", just ignore that and "Continue Anyway".
9. DO NOT TURN ON USB STORAGE. LEAVE IT AS IT IS.
Time to install CWM. There are two methods. One is easy, by running a script and another is using ADB by typing commands. You'll get an _Instructions.txt there which lists both the methods in case you want to try out the 2nd method. Here I'll only cover the easy one i.e. using Script.
10. Run recovery-install.bat [Windows] / recovery-install.sh [Linux] and press any key and just wait and watch the show
11. Within few mins recovery will be installed.
To reboot in Recovery Mode -> Press Options Key and by keeping it pressed, Press Power Key. Release Power Key and then Release Options Key.
12. Reboot.
Code:
=======================================================
| How to control ClockworkMod Recovery 5 |
| |
| VOL+: up |
| VOL-: down |
| POWER: select |
| BACK: back |
=======================================================
Credit goes to tkin
HAVING PROBLEM WHILE INSTALLING CWM?? GETTING PERMISSION DENIED ERROR??
Ok, for those who cannot install CWM from the normal steps(most probably new funbook users having Base 1.2 and ICS 4.0.3) follow these steps.
1. Install Superuser from playstore, update binary, you'll notice it will fail one part(red text), re do the update 2,3 times staright away until all the text become green, no need to reboot phone, but you might want to.
2. Install Android terminal from playstore, in terminal put su and press enter, if you get a warning allow it, if # comes you have root access. If not, re do step one. Don't continue till you get this step correct.
3. Download ES File manager from playstore, go to settings, allow all root access related options and also tick go upto root option.
4. Now start ES file manager, go to root, long press the dev folder, set properties, check all boxes, click ok. Do the same for the data folder, now open the dev folder, and repeat the steps for the block folder, and inside the block folder do the steaps for nandg file.
5. Allow USB debugging from dev options, connect the cable, install drvers.
6. Run the ICS recovery script, wait for it to finish, if it fails then you need to check and set permission again, if all goes well you have successfully installed CWM.
Warning: When setting permissions in ES File Manager make sure the USB cable is not attached, if so it might cause a hard crash and brick the device.
I had used this method to flash CWM on mine and on my friends device, both Base 1.2 and ICS 4.0.3(made in may 2012, the rom build no is: 97F1-D1-H2-H01-MMX.20120512) hence I think funbooks made after may 2012 must use this method, otherwise the script will fails due to permission denial.
Click to expand...
Click to collapse
Worked like a charm for me after setting permissions... Good luck..

Guys try the new Rom
http://forum.xda-developers.com/showthread.php?p=28353648
Sent from my HTC Desire S using xda app-developers app

sudhirrawal20 said:
sir i want to add custome rom jetmod 5.0.1 in my micromax funbook but after installing it process says sucess and then it stucks on FUNBOOK LOGO so, pls tell me how could i solve it
Click to expand...
Click to collapse
If you want Custom to Jetmod you have to flash yuor ROM into ployer Momo9 Based ROM...
Please use search tool forum before asking question like this.

sukhjit321 said:
For all having problems in installing I found this on thinkk digit forums... Maybe this will help you:
Worked like a charm for me after setting permissions... Good luck..
Click to expand...
Click to collapse
dude 'm suck wit a problem!!
I can't change permission of nandg. file and the file name on my funbook is '2012nandg'
I time root browser es explorer
help!! and es explorer gives me on root access to change permission

how to root?
Micromax Funbook ICS 4.0.3 how to root it?
guys i had lots of troubles in installing custom recovery so i tried sparky root but that crappy app can only unroot.
after that i cant update su binary.so used superoneclick it can only root 2.2 and 2.3 now am stuck with rooting.
please guide me to root funbook

neo.abyss said:
I was also trying to install CWM recovery on my funbook. I have already installed SUPERUSER app and updated SU binary.
I am getting below error while running recovery-install:-
* daemon not running. starting it now *
* daemon started successfully *
failed to copy ‘recovery.img’ to ‘/data//recovery.img’: Permission denied
/system/bin/sh: cannot create /dev/block/nandg: Permission denied
Kindly help in this case.
Click to expand...
Click to collapse
Try this:_
Right click on 'recovery-install.bat' and run as administrator.....

Unable to install recovey on funbook
Is there anybody to help, i am getting the same error while trying to install recovery on my funbook....
I am getting below error while running recovery-install:-
* daemon not running. starting it now *
* daemon started successfully *
failed to copy ‘recovery.img’ to ‘/data//recovery.img’: Permission denied
/system/bin/sh: cannot create /dev/block/nandg: Permission denied to install a custom rom...

this is the easiest way to root
1)download this super user by chainsDD on you funbook
2)open it and update you binary from it and you r done
installing cwm is easy use this guide

[ROOT][CWM recovery]QMobile A4 bolt|

Hello All!
As You people know i always post things for QMobile A2 users but today i am posting for QMobile A4 bolt users
I was receiving messages nd also peoples were posting nd asking on the page that to how to root this A4 bolt !!!
Dear QMobile A4 bolt users ur prob is now solved & em here to get ur phone rooted nd cwm recovery installed!!!
This method is not checked by me nor any a4 bolt users but this method is checked by users of A4 clone phone!! nd this method is also i took from clone phones thread so full credit to them but also me to gather the info nd mix them in 1 thread coz i hv gathered this info from diifernet blogs! nd some info is by me!!
WARNING!!!
I am not responsible for any brick or broken hearts so dont blame me in any case!!
EDIT
The Below method is 100% working nd checked. Also the below method of rooting is working for a2 bolt lite too!!
prove
Root Method
REQUIREMENTS
1 QMobile A4 bolt
2 Orignal data cable
3 Moroboro pc suite for installing drivers automatically| DOWNLOAD IT
4 Unlock root |DOWNLOAD
5 this is optional if unlock root will not work then use it for rooting! srsroot |DOWNLOAD
6 A brain
Procedure
1) Attach your phone to the computer and turn on usb debbuging from Settings>applications>development>USB Debugging ...windows will try finding the drivers for it named e56 and will oviously fail..
2) Start moborobo pc suite.. it will search for devices and will auto install the drivers for your phone.
3) Disconnect the phone and exit the moborobo pc suite. exit it from status bar dont just close it.
4) Connect the phone again and start Unlockroot or srs root..
5) Click on the root button..Unlockroot will automatically search for the device(Named E56). Select it.
6) The rooting process will start and your phone will be rebooted. and you will see the SuperSu app in the app drawer.
NOW AFTER ROOTING ,
Install Clockworkmod Recovery
REQUIREMENTS
1 A brain
2 ADB pACKAGE |DOWNLOAD
3 QUICK BOOT |install it on ur phone via play store
4 CWM recovery | DOWNLOAD
Procedure
1) Now Extract the ADB package in your Pc root drive (Basically the root drive is C: drive )
2) Download the Recovery from above
3) Extract the ADB package & you will get an adb folder. Now put the Recovery.img downloaded above in that adb folder.
4) Now Enable USB debugging in your phone by going to Settings->Development->USB Debugging (Skip this step if it is already enabled)
5) Now Download the Quick Boot App from above & install it in your Mobile. Open that App & click on Bootloader option.
6) After sometime your phone will get stuck at the logo. (don’t panic)
7) Connect your phone to PC using USB cable.
8) Now open the adb folder & inside that folder press & hold the Shift key + right click on blank space & choose Open Command Window Here.
9) Now a black cmd window will open, there type fastboot devices
Note :- This should display your device name in Fastboot mode, if nothing is shown, then you have to Follow this to install adb drivers
10) Now Type fastboot flash recovery recovery.img
Within a sec the process will get over & it will install the cwm recovery img on your QMobile A4 Bolt
Now you can check whether your CWM is working or not:-
Remove battery of your phone and reinsert.
Press Power and Volume Up key to boot into recovery mode.
If it get booted into recovery mode then it mean you have successfuly installed it, if not then try the process again.
ENJOY QMobile A4 bolt users , now u hv rooted & cwm recovery installed!
DONT copy this method to other blogs nd websites!!
Qmobile A4 Bolt users HIT that THANKS button because i deserve that!!

I could not enter the bootloader mode through quikboot aap on my Bolt a2 lite,,,,however i have rooted it successfully.... kindly let me know to install CWM???

Micromax A117 Magnus All things root & Development!

The Recently Launched A117 is a good and direct replacement to the A116..
Anyway Here it is
1. Drivers
http://mediafire.com/?e6c4j3d8j6c5ui3
2..ROM
http://d-h.st/K6W
3.ROOT Guide
By using Root with Restore by Bin4ry v15.7z(download from attachments)
1.Enable USB debugging on your device. To do that, go to Settings > Development > USB debugging.
2.Connect your device to any PC/laptop and install the drivers .
3.Unzip the root tool you downloaded above.
4.Change the mode of your device from USB Storage to Media Device and proceed further. This change can be done only when you have
connected your device to the PC, so don't go mad searching for this option before you have even connected your device.
6.Run the runme.bat file.
7.A command prompt with weird green letters will pop-up on your screen.
Follow the onscreen instructions carefully. To start off, you willl need to type in a "1" and press enter.
Note: If you ever want to Unroot your Micromax A88, follow the above steps till you reach this one and then, instead of typing "1", type "x" and hit enter. Follow the instructions that appear on the command prompt after that.
8Your device will reboot during the process after which Bin4ry will copy some files to your device.
9.Else just reboot your phone
10.When the green letters in the command prompt says Have Fun!
That means, your device is rooted now and you can enjoy Superuser permissions!
By Framaroot
MOD EDIT LINK REMOVED Must link to the main thread.
Install nd Click Root.Then install Busybox from play Store
CWM - !!{NOT TESTED BY ME BUT MY FRIEND TESTED IT}
Install Mobile Uncle Tools from Google Play
Recovery - MOD EDIT LINK REMOVED
1.Download the recovery and Put it in root of your SDCARD
2.Open Mobile uncle tools and select Recovery Update
3.Flash my recovery.img file
4.Done
If you Like my post please click THANKS

Is It Safe to Flash CWM Recovery ON Canvas Magnus Is It Really Tested I have A Canvas Magnus and I want to Install CWM recovery on it.

sayan8 said:
The Recently Launched A117 is a good and direct replacement to the A116..
Anyway Here it is
1. Drivers
http://mediafire.com/?e6c4j3d8j6c5ui3
2..ROM
Mod Edit Link Removed
3.ROOT Guide
By using Root with Restore by Bin4ry v15.7z(download from attachments)
1.Enable USB debugging on your device. To do that, go to Settings > Development > USB debugging.
2.Connect your device to any PC/laptop and install the drivers .
3.Unzip the root tool you downloaded above.
4.Change the mode of your device from USB Storage to Media Device and proceed further. This change can be done only when you have
connected your device to the PC, so don't go mad searching for this option before you have even connected your device.
6.Run the runme.bat file.
7.A command prompt with weird green letters will pop-up on your screen.
Follow the onscreen instructions carefully. To start off, you willl need to type in a "1" and press enter.
Note: If you ever want to Unroot your Micromax A88, follow the above steps till you reach this one and then, instead of typing "1", type "x" and hit enter. Follow the instructions that appear on the command prompt after that.
8Your device will reboot during the process after which Bin4ry will copy some files to your device.
9.Else just reboot your phone
10.When the green letters in the command prompt says Have Fun!
That means, your device is rooted now and you can enjoy Superuser permissions!
By Framaroot
MOD EDIT LINK REMOVED
Install nd Click Root.Then install Busybox from play Store
CWM - !!{NOT TESTED BY ME BUT MY FRIEND TESTED IT}
Install Mobile Uncle Tools from Google Play
Recovery - MOD EDIT LINK REMOVED - Untested recovery
1.Download the recovery and Put it in root of your SDCARD
2.Open Mobile uncle tools and select Recovery Update
3.Flash my recovery.img file
4.Done
If you Like my post please click THANKS
Click to expand...
Click to collapse
Give proper credit to the ROM creator. Copying is prohibited. You could be ban. And stop copying my work. It's my hard work.
Edit: I could see your rooting note. That's simply copy paste. Will report it soon!
Full Regards.

Minimilised_MR said:
Give proper credit to the ROM creator. Copying is prohibited. You could be ban. And stop copying my work. It's my hard work.
Edit: I could see your rooting note. That's simply copy paste. Will report it soon!
Full Regards.
Click to expand...
Click to collapse
Hey Bro i didnt copied -_-.

Thread Re-opened
Thread temporarily closed pending XDA investigation.
Thread re-opened. Rom download link re-established.
Links removed for Framawork.apk, as the link should be directed to the apk's XDA thread by the original author.
Especially for the CWM Recovery that the OP has not been tested. If the recovery was not compiled using all correct fstabs, the result will be a corrupted/damaged partition, and possibly a perma-bricked device.
MD

I am also looking for stock rom and stock recovery. How to take back up of these??
So i can go ahead and install cwm and root

A117: The software version “S9204P_MP_IN_MMX_18_FLASHER_USER” is confirmed. Release
A117: The software version “S9204P_MP_IN_MMX_18_FLASHER_USER” is confirmed.
Release note: Integrated ‘foneclay’ in the software.
https://www.adrive.com/public/UvawHB/S9204P_MP_IN_MMX_18_FLASHER_USER.rar
Please support me by hitting the THANKS BUTTON for me

Please regular update forum.....
Sent from my Samsung Galaxy S4 Mini GT-I9505 using XDA Premium 4 mobile app

Check below link for All in One Guide for Canvas Magnus. Regularly updated
http://forum.xda-developers.com/showthread.php?p=48466519
http://forum.xda-developers.com/showthread.php?t=2569049

[Q] Installing cwm on funbook p280

I want to install cwm recovery on my funbook p280. My device is already rooted but not unlocked my bootloader to install custom roms please help me. My device is rooted with the help of bin4ry. (Same procedure followed for a89). I tried a lot of procedures like novotools,nandroid manager,flashing cwm using adb drivers, rom manager they are not working. My device has Jellybean(4.2.2) inbuilt.

Rooting funbook p280
1.Enable usb debugging in settings -> Developer options in your tablet
2.connect your tablet to pc(Windows 7 or xp)
3.You have to innstall adb drivers in your pc.
4.Unzip A89 Rooting.rar file.
5.Then run Runme.bat file.
6.Select option normal by entering option 1.
7.Then follow instructions on the screen.

Stock rom installation on Funbook P280
1.Download stock rom and Live suite pack from attachments.
2.Switch off your Tablet.
3.Connect your device to your pc(windows xp or windows 7)
4.Now press volume down and power button until the pc detects and shows unknown device in device manager.
5.Then double click on live suite pack.
6.While extracting it will ask for installing drivers automatically.
7.I will post remaining on next replay.

dasarinarendra said:
Stock rom installation on Funbook P280
1.Download stock rom and Live suite pack from attachments.
2.Switch off your Tablet.
3.Connect your device to your pc(windows xp or windows 7)
4.Now press volume down and power button until the pc detects and shows unknown device in device manager.
5.Then double click on live suite pack.
6.While extracting it will ask for installing drivers automatically.
7.I will post remaining on next replay.
Click to expand...
Click to collapse
After flashing my auto rotation got screwed any help

Sorry to say that I am also facing same problem. I am not using Auto rotation now.

[GUIDE]Newbie Guide for How to Root/Flash Recovery/UNBRICK on Canvas A111

Hi good day to all am RJ am going to guide how to ROOT / FLASH RECOVERY in Micro max Canvas A111 jb4.1.2
WARNING: If your Micromax Canvas A111 smartphone gets bricked or gets damaged while following the tutorial given below, we shouldn’t be held responsible. Proceed at your OWN RISK.
I will try to keep this guide up to date. Please let me know if you find something wrong or missing
Content:
1) Introduction
2) How to root
3) How to flash recovery
4) FAQs (ADB, Loki, Download Mode, Go to Recovery etc.)
5) Troubleshooting (unbricking)
1) Introduction:
Micromax Canvas Doodle a111 is a 3G Android smartphone with a 5-inch TFT HD Touchscreen display. The phone is powered with 1.2 GHz Quad-Core Processor and it runs on Android 4.1.2 Jelly bean OS. With 8 mega pixel rear view camera, the phone offers high quality image capturing. If you are looking for a smartphone under 10000 INR with good features, then Micromax Canvas A111 would be the ideal choice!
If you are a user of Micromax Canvas Doodle a111 and would like to gain root access for installing rooted apps or custom ROM’s, then the following tutorial will help you. I have given step by step instructions for rooting A111 smartphone below
2) How to root:
Prerequisites To Root Micromax Canvas A111 Smartphone​1. Take complete backup of your personal data in the Micromax device using appropriate apps. Although the root process won’t affect them, its safe to keep a backup.
2. Remove all the Antivirus applications installed on your smartphone for virus protection since sometimes they will cause trouble while the rooting process is going on.
3. Charge your phone battery and keep its backup level above 80% as the rooting process drains the battery. If you don’t have enough battery backup and your device gets switched off during the rooting, then surely it will get bricked. Avoid it by having a good battery backup.
4. ***Enable USB Debugging mode in your device by following the path: Settings -> Developer Option -> USB Debugging.
5. *** Make sure you have drivers for your phone Download from here http://www.androidrootguide.com/micromax-usb-driver-download-get-drivers-micromax-smartphones
Once you have done all the above mentioned tasks, you can move on to the rooting tutorial given below.
download any one application from bellow links
1. For VROOT :: click here
2. For Root Genius:: click here
Tutorial To Root Micromax Canvas A111
> To get started, download VROOT / Root Genius from bellow link and install it on your computer. Once installed, open the application.
> Now connect your Micromax Canvas A111 smartphone to the computer using the “USB Debugging Mode”. If you have installed the required USB drivers for your phone on the computer, then the VROOT application will automatically detect your smartphone.
> Now just click on the “Root” button shown on the VROOT / Root Genius window and let the rooting process begin. The smartphone will get restarted several times during the process. So, don’t panic. Once the rooting process is finished, the device will reboot for one more time.
> Thats it. Now you have successfully rooted your Micromax Canvas A111 smartphone. If you want to confirm whether you have successfully rooted or not, use the “Root Checker” app. If you encounter any issues while following this rooting tutorial, do let me know via comments.
****** if u not able to understand the above please click on the Link it will more easy http://rjpraveen.blogspot.in/2014/08/how-to-root-micromax-canvas-doodle-a111.html
3) How to flash recovery:
To install ROM’s and Kernels you need a custom recovery already you learned how to ROOT Device from above information now its the time to use unlocked boot loader to your device k lets move through the part
and
to flash recovery no need root access don't bother if u are rooted or unrooted. if you are unrooted then also you can do it i provide both information for rooted and unrooted users
Things needed before flashing:
1. Proper drivers (see section 1)
2. ADB. There are various ways to get it but don't worry about size and installation i marked it small and easy
3. Required Recovery images(TWRP/CWM/STOCK & MIUI) provided link bellow.
4. Basic Knowledge on PC..
NOTE:: I am not responsible for bricked devices.
Download Recovery image files from billow links
CWM Recovery :: Download the img for your device here
TWRP Recovery :: Download the img for your device here
MIUI Recovery :: Download the img for your device here
STOCK Recovery :: Download the img for your device here
This Step for Rooted Users Only
Download Flashify from Google Play here
(before follow this step please ensure that your battery device has more 50% in case of out of battery during this process)​
1) Use Flashify Application:
This program required Root Permission and it free with limited functioned that can install Custom Recovery 3 times a day. If need more please support dev.
2) Make sure you hit “Allow” when Superuser request window pops up when opening the Flashify app.
3) Choose “Recovery image” for recovery images like CWM or TWRP. (You could even flash stock recovery images and unroot btw.)
4) Next, choose the file you want to install by choosing “Choose a file”.
5) Choose one of the Recovery Download CWM or TWRP or OTHER but I recommended TWRP
6) Browse your storage and choose the IMG file you want to flash.
7) Choose “Yup”. That’s it!
if u want to See more Detailed Information with image presentation click here
This Step for Rooted/NON Rooted Users also
>>>> Download ADB Required files from here
if u want to watch video how to install click here
1> Enable USB debugging mode in ur device
for this(go to setting >> developer Options >> tick usb debugging)
2> Switch off your device and start it in ""fast boot"" mode
for this Switch off device after this
Hold (Volume down + Power Button) both at same time it will show canvas logo with top blue LED above sensor
that's it it means that now your device in fast-boot mode
3> Now connect your mobile to PC with the data cable it will automatically install drivers if not install drivers manually download from above section 1
4> Now get back to PC navigate to download folder it contains 2 folders
1.fast boot files and
2.Recovery Images
now copy recovery which one u want from "Recovery Images" folder to "fast boot files" folder
(stock -- default what MMX device provides)
(CWM/TWRP/MIUI Custom recoverys)
then rename the copied file with name "recovery"
5> Now open "fast boot files" folder at this time in keyboard hold "shift button and click right mouse button" at a time with in the folder
(don't select any file first just left click on white space then proceed "shift+right mouse click at a time")
6> with in this choose option "Open Command Window Hear" then type command
command is
Code:
fastboot flash recovery recovery.img
​ now it show to "okay" messages
now type command
command is
Code:
fastboot reboot
​
7> wait until Ur home screen available on device then disconnect from PC that it enjoy recovery
4) FAQs:
1. HOW TO CHECK WHETHER I ROOTED OR NOT ?
A. Don't worry there is a lot of options to check root access on of that is easy Download "Root Checker" from Google Play and follow procedure in app
2. WHEN FOR ROOTING I CONNECT DEVICE NOTHING PROCESSING ?
A. Install drivers Perfectly and check data cable
3. HOW TO ENTER FAST BOOT MODE?
A. Take Look its easy but small confusion is device started in fast boot mode or not when in fastboot mode its just showing blue led and logo and stuck at logo its enough device in fastboot mode
to switch on fastboot mode(Volume down + Power Button)
4. HOW TO ENTER INTO RECOVERY MODE AFTER INSTALL OR CHECK IT?
A. just Switch off device and press (Volume UP + Power Button) wait until it show recovery don't leave keys
5. HOW TO BACK UP EXISTING ROM?
A. just enter into recovery choose backup option that's it it will place folder according to Ur recovery in SD
5) Troubleshooting
a)Unbricking
If you are reading this you have a problem. Your phone has become a brick. But do not despair yet as there are a few ways to unbrick your phone. Let us first determine whether it is a soft brick or a hard one.
**Soft Brick: Basically it means your phone is bootlooping or showing a blank screen but you can still go to recovery/download mode. The easiest way to fix this (and determine if you have a soft vs hard brick) is turn off the phone and then press the volume up button and powerbutton (keeping vol up pressed). If you see recovery no problem flash stock rom
**Hard Brick: If you cannot enter download or recovery mode then you may have a hard-brick. This is not a fun situation to be in but there is a fix that may work. It involves lots of linux commands and is not for newbies but then if you are hard-bricked what have you got to lose.
Here is the guide done by ChinmaySharma to get back if u hard bricked
http://forum.xda-developers.com/showthread.php?t=2901983
For Video Review to Unbrick watch here in this link in you tube https://www.youtube.com/watch?v=35E21Vi_ddE
Enjoy New Tricks Don't put face like this if u got any stuck at any where just ping me ill make u like :fingers-crossed:

Hi I tried to flash one of your ROM and it displayed bricked cant help and when i reboot it stuck with boot image of canvas. can you please help me

hii..thanks for this...but i soft bricked my phone
when i connect my phone to pc to install drivers....it is showing unknown usb device (device descriptor request failed)
please help me out

thanks sir i am doing it right
I was not able to Flash my drive but becz i have taken Fast boot file from another place and recovery file from another place. But you did the right thing everything going right and i am able to install rom in my micromax A111. Thank you so much sir. I appreciate your hard work.