Database Info

[tutorial]MOST EASY WAY TO ROOT MICROMAX A56 NINJA 2 [step by step procedure]

hey, guys this is me again and I have got a lot of PMs and messages on my email regarding guide showing step by step process for rooting micromax A56 ninja 2.
Now, there are two ways to root this phone.
[FIRST] :-
1.Just download the .zip file to your computer and then transfer it to your sd card.
http://www.mediafire.com/?pfl66pst67bblq1
2.Now switch off your device.
3.Press "volume+" key and "power button" together.
4.when the phone vibrates (it does when you switch it on or off normally)..leave the power button but continue pressing the "volume +" button.
5.you will enter into your recovery.
6.you will see a yellow bar showing the completition for the process.
7.leave your phone and dont touch it until it completes.
8 .Your phone will restart.
9.download super user app from the market and install it. (IMP).
10.you are rooted.
Requirements:-
1.Nothing.
2.back up your contacts and messages and other data.
[SECOND] :-
1. download the attachments here.
2. download this : http://www.mediafire.com/?jrzuezl8s5t8k0s
3. download android sdk from http://developer.android.com/sdk/index.html.
and install it by following the instruction onthe page.
4.extract the usb.ini file in the ".android" folder located at C:/users/(ur_name)/
5.You dont need to create this folder it should already exist...after you installed the sdk.
6.download and install unlock root from step 2
7. go to your phone's settings->applications->development and enable USB Debugging NOW connect your phone to PC.
8. go to C:/users/(ur_name)/android-sdk/platform-tools
9.open command line there
10 type adb devices (hit enter)
11. verify that A56 is listed.
12. now run unlock root. and click root option.
REQUIREMENTS :-
1.patience
2.Common sense.
NOTE : if you get any unexpected results or any step is not giving the output as desired. JUST GO WITH THE FIRST METHOD.
Regards,
imetal1.

Nice TUTs man....this may help the newbies here.

That rom given by swap002 is nt rooted i've checked it.
Its just the same as we both felt pre rooted stock rom. It needs to be rooted via unlockroot.
Sent from my A56 using xda premium

Micromax funbook alpha p250: All Things Thread

MICROMAX FUNBOOK ALPHA ALL THINGS THREAD
ROOT YOUR FUNBOOK ALPHA EASIEST WAY
DOWNLOAD SUPER ONE CLICK ROOT FROM HERE http://superoneclick.en.malavida.com/
ENABLE USB DEBBUGING in settings/developer options
connect yor tablet to pc click the root button
it takes a couple of minutes restart your funbook alpha and enjoy
if it says any error install
java jdk from here http://www.oracle.com/technetwork/java/javase/downloads/index.html
and android sdk from here http://developer.android.com/sdk/index.html
unroot your funbook alpha
follow above process instead of root click unroot enjoy
CWM FOR FUNBOOK ALPHA
WHAT ROOTING A DEVICE MEAN WITHOUT CWM
SO HERE IS CWM FOR MICROMAX FUNBOOK ALPHA
First download novatools from here http://www.mediafire.com/?3wln4u1geo1g1vs
and cwm recovery from here http://www.mediafire.com/?t3ctcths6r2229q
make sure you have extracted the zip
now place the img in root of external sd card [some users reporting problems if placed in internal sd card]
access the cwm recovery by pressing volume up and power key
Note:there is no back button because alpha doesnt have physical keys
after cwm back up go to backupformat hold the power key your alpha will reboot
credits:willing magic
please hit thanks it took 4 hours for searching and pasting these information

MICROMAX FUNBOOK ALPHA ROMS
JELLYBEAN ROM FOR MICROMAX FUNBOOK ALPHA
LINK http://forum.hackmyandroid.com/f31/[rom][funbook]cyanbook-jellybean-edition-v-1-[11-09-2012]-240/
PRO A13 ROM http://www.androidtablets.net/forum...eneric-7-a13-android-4-0-4-hyper-edition.html
CYANOGEN MOD FOR FUNBOOK ALPHA
http://forum.xda-developers.com/showthread.php?p=31368415
STOCK ROM
LINK http://www.androidtablets.net/forum...eric-7-a13-android-4-0-4-hyper-edition-3.html
jellybean rom working awesome http://www.techknow.t0xic.nl/forum/index.php?topic=4595.0 (will shortly mirror it )
cm 10 for our alpha http://www.freaktab.com/showthread....02c-amp-PMIC703-CM10-Jelly-Bean-Compatibility
alphadroid rom http://www.mediafire.com/?8e7p9e7bcopoazw
tried the above roms did any mistake and bricked your device thinking of giving it to service center not needed here you
go follow this post and your tab is once again alive
http://funbook.gizmolord.com/installing-clean-android-ics-on-micromax-funbook/
please hit thanks it took almost 4hrs for writing this post
please hit thanks it took almost 4hrs for wirting this post pls it doesnt cost you

alternate method for rooting very easy
Steps :
1. download file from here (Bin4ry)
http://*******/HSpiK
2. Now download adb drivers. you can get the package by searching for 'adb drivers'
check http://forum.xda-developers.com/show....php?t=1662082 for more info
3. after you have installed it , go to the settings
Tick these 'Security -> unknown sources' and 'Developer options-> USB debugging'
4. Connect the device simply to pc usb port , do not turn on usb storage in device , just connect and keep it . In the device you can see 'usb debugging' in the bottom right corner after connecting
5. Now extract the zip file downloaded earlier , that is , the Bin4ry
6. Run 'RunMe.bat'
7. now type '1' and press enter
8. Now some things come writing like 'pushing busybox , super su' something like that
9. after some time it will say to click restore on device.
10. now look at the device and we can see that there two options , restore data and dont restore.
11. Click restore data.
12.wait some time and the device will restart
13.Now on the computer screen we can see that the successfully installed message.
14. Now to check whether you have rooted correctly , install 'root checker' from play store on the device and run it and click check or verify.
15. Boom !! It says device is rooted
16. Or just simply check your device's application area for 'SuperSU' application . If it is there , you have rooted correctly otherwise something have gone wrong. Just redo the steps it is simple. (please check whether you have installed adb drivers correctly)

reserved for something just for precaution creating these reserved post caust newbies will waste time searching whole thread

help in rooting

hey can anyone help me in rooting my phone Micromax A110

1) Download the flash tools from anywhere preferably most updated one: SP_Flash_Tool_v3.1224.01
2) Download the recovery and Sotck ROM provided by OP
3) In your desktop / laptop please ensure you allow installation of unsigned drivers (youtube will help for this)
4) Download and install MTK6577 Drivers for your device (this will only work after you clear step 3)
5) If still not working, download USBDEVIEW (usb driver remover) and run it as "Administrator" uninstall all the USB drivers relevant to your device.
6) Now connect your phone, with portable media option selected in USB. Let it install and finish
7) Once done switch-off your phone while it is connected through USB (Again this will install a driver which will look like MTK65xx something...
8) Remove the battery of phone let your PC install the driver again (battery not plugged in). You will see for a shot time that charging icon will appear on phone and disappear
10) To confirm this, put your battrey again back in your phone with USB (still) connected to PC
11) To confirm this again, go to system manager and look for MTK 6577 something ... something...
12) Now disconnect your phone and switch it on
13) Start the flash tool
14) Select the Scatter loading file from Stock ROM folder
15) Click Firmware download / upgrade
16) Connect your phone (which i assume is switched on), once you connect switch it off (no need to remove battery or anything)
17) Look at the status bar of your flash tool (nothing to worry, no need to do anything)
18) RED Bar -> Yellow Bar -> Green Ring ( this process of flashing the entire new stock ROM should take not more than 2 - 3 minutes )
19) Disconnect
20) Reboot
21) You are on new Update
The same procedure you can apply for flashing the CMW / TWRP Recovery. Or if you do not want to re-do the procedure, simply replace the stock recovery.img with TWRP / CMW / LEWA recovery.img whichever you like; in this way you do not repeat the process of flashing custom recovery
I believe you must have the idea how to flash the Super user after this in case you wana root your phone.
Hit thanks if i helped
Sent from Micromax A110 ( Canvas 2 )

maddyrokieasta said:
1) Download the flash tools from anywhere preferably most updated one: SP_Flash_Tool_v3.1224.01
2) Download the recovery and Sotck ROM provided by OP
3) In your desktop / laptop please ensure you allow installation of unsigned drivers (youtube will help for this)
4) Download and install MTK6577 Drivers for your device (this will only work after you clear step 3)
5) If still not working, download USBDEVIEW (usb driver remover) and run it as "Administrator" uninstall all the USB drivers relevant to your device.
6) Now connect your phone, with portable media option selected in USB. Let it install and finish
7) Once done switch-off your phone while it is connected through USB (Again this will install a driver which will look like MTK65xx something...
8) Remove the battery of phone let your PC install the driver again (battery not plugged in). You will see for a shot time that charging icon will appear on phone and disappear
10) To confirm this, put your battrey again back in your phone with USB (still) connected to PC
11) To confirm this again, go to system manager and look for MTK 6577 something ... something...
12) Now disconnect your phone and switch it on
13) Start the flash tool
14) Select the Scatter loading file from Stock ROM folder
15) Click Firmware download / upgrade
16) Connect your phone (which i assume is switched on), once you connect switch it off (no need to remove battery or anything)
17) Look at the status bar of your flash tool (nothing to worry, no need to do anything)
18) RED Bar -> Yellow Bar -> Green Ring ( this process of flashing the entire new stock ROM should take not more than 2 - 3 minutes )
19) Disconnect
20) Reboot
21) You are on new Update
The same procedure you can apply for flashing the CMW / TWRP Recovery. Or if you do not want to re-do the procedure, simply replace the stock recovery.img with TWRP / CMW / LEWA recovery.img whichever you like; in this way you do not repeat the process of flashing custom recovery
I believe you must have the idea how to flash the Super user after this in case you wana root your phone.
Hit thanks if i helped
Sent from Micromax A110 ( Canvas 2 )
Click to expand...
Click to collapse
can you give me the drivers

poran123 said:
can you give me the drivers
Click to expand...
Click to collapse
That method is not for rooting....
It is installing ROM
Go to this link
Or Better go thru this thread all things for a110
Sent from my A110 using xda app-developers app

KARBONN TITANIUM S20 deVLEOPmENT

HERE IS THE FIRST OFFICIAL
CWM FOR KARBONN TITANIUM S20
ORIGINAL BOOT N RECOVERY .IMG
join FB GROUP:::<ww.facebook.com/groups/323894334469784>
sTOCK ROM (SOON BE UPLOADING)
Site ::: karbonnts20.blogspot.in/
nEWBIE PROBLEM THATS WHY LINKS ARE NOT ALLOWED TO POST

Rooting KArbonn Titanium s20
#Requirements:
"I am not responsible if you brick your phone"
CWM recovery (Link)
SU & Binary files (Link)
Use SP Flasher v 5.0xx to flash (Link) .
Download the scatter file MT6582(Link)
#Procedure :
Open SP flasher and choose scatter file Mt6582_android_emmc.txt
Goto recovery link and choose the CWM recovery (downloaded).
Now connect your device in switch off Mode with its battery inside and Download it
Now open CWM by pressing Vol up+Power Key
Choose "Install zip from sd card" >Choose zip from Sd card > select the update SU.zip
Reboot and we are done rooting.
for links check the site!!

Repartition Internal SDCARD
As we know this device {MTK6582}comes with 4GB ROM with APP data to be 1GB and user Storage 1.59 GB.
Such small APP space cause a lots of problems Thus best way is to repartition it with HKRom Manager.
For links visit the site :-htp://karbonnts20.blogspot.in/
"I am not responsible if u brick your phone , dead internal sd or so n so .Better do it on your own risk"
Requisites:
Hk rom manager.apk
CWM /TPRW recovery
A full backup CWM or TPRW.
Procedure:
Before you proceed take a full CWM or TPRW backup as phone internal partition may not work or respond sometimes.
Now install the app
Open the app and select mt6582 fast runner (2nd option) ::it will be the only highlighted option .
Choose your required data size (say 2GB , its fine ) and hit apply and now wait.
It will show boot into recovery ,hit yes
After 3 mins you are done. ReBoot it
Now You have 1.8GB APP space and 540MB for storage
"Remember all your phone data will be lost as phone is re-partitioned and Formatted. "
thanks to XDA

Ways to extract stock rom
How to Extract Stock Rom {Detailed procedure with Video tutorial}
FOR LINKS PLEASE VISIT THE SITE :- []ttp://karbonnts20.blogspot.in/[/url]
"This Tutorial is applicable MTK devices "
Required :-
SP flasher- [ttp://sh.st/o9xC5[/url]
MTK Droid Tools- [tp://sh.st/o895X[/url]
Scatter file
ABD Drivers
Ways to extract stock rom:- Video Links
1.Case I:- "If you have a unrooted and no CWM ANDROID Phone with USB Debugging Enabled "
Tutorial Visit:- ttp://sh.st/ocUme[/url]
2. Case II :- An Android Phone having CWM (with or without Root)
Tutorial Visit:- ttp://sh.st/ocOaC[/url]
3. Case III :- "A rooted Android phone (with or without CWM) USB Debugging Enabled"
Tutorial Visit :- ttp://sh.st/ocOBw[/url]
Thanks to XDA , and the Developers
Procedure:-
Case-I :If you have a unrooted and no CWM ANDROID Phone with USB Debugging Enabled
First TURN ON the USB Debugging Option :: ie , Settings>Developer options>USB debugging and install ADB drivers
Start MTK Droid Tools <Provided above> ,Grant the USB debugging request and wait till device get discovered .
Then click on BLOCKs Map and you will get all partition and their length .Here you can create a scatter file also. and minimise the window .\, We would require the location later.
Then TURN OFF the phone . OPEN SP flasher , Choose the scatter file you made or provided in the link.
Then Goto READBACK tab and add a readback file ie ROM_0
Click on ROM_0 and choose the destination Folder .
Now a Box will open and ask for Start address and length ,SET it in hex and do the following
start address:0x0000000 and length 0x7FB80000 [The length of FAT as in scatter file] ,Remember if you want the length shown in block map then just ADD 0x [length] .
Now HIT readback. Connect the Phone using USB with battery inside the phone and wait till its get discovered and yellow bar will represent the work.
It would nearly take 30-45 mins and we got our ROM_0 file.
Again Turn ON the phone and connect with USB debugging ON.
Open Minimised MTK Droid tools and Goto Root,backup tab and Hit Process ROM_0.
It will ask to make CWM recovery from original recovery ,if u want CWM fro your phone here you can get it HIT Yes.
After Processing finished we will get our SP flashable STOCK Rom Files in mtkdroidtools>backup
Hence we are done . And In RESULT we get ,ScAtter File ,SP Flashable STOCK Rom images and CWM Recovery for the phone.
Thank You
Case II:-An Android Phone having CWM (with or without Root)
Here we get CWM Backup For Stock Rom which is good for Porting like purposes.
Keep 3 GB of space empty in SD card.
First Turn OFF the Phone and HOLD UP+ Power Key
Enter to Recovery Menu>Backup and Restore
Hit Backup
After it completes Goto SDCARD>CLOCKWORKMOD>BACKUP
Result we get CWM Backup of STOCK ROM which can be flashed By CWM on Hitting restore in Backup and Restore.
Case-III:-A rooted Android phone (with or without CWM) USB Debugging Enabled
Here we can get CWM recovery,SP Flashable Stock Rom and to work with Rom files.
Connect the phone phone to PC via USB and turn ON the USB Debugging.Keep 3GB SDcard Space
Then start MTK Droid Tools and let it detect your Phone.
Then Hit ROOT button just at Down right.
Let it connect to phone and Grant the SU Permission in the phone.
The yellow mark in down left corner will turn Green .
Goto Root, Backup Tab and Select userdata and cache in Bacup option.
Now hit Backup. It would take and hour or so.
Then click on" prepare blocks for flash tools" and wait .
After it Finishes you have CWM recovery,SP Flashable Stock Rom and to work with Rom files.
Mtkdroidtools>backups>"[Phone name]">!imagesfor flashtool
Hope it help You
Hit like and Share

[GUIDE]Newbie Guide for How to Root/Flash Recovery/UNBRICK on Canvas A111

Hi good day to all am RJ am going to guide how to ROOT / FLASH RECOVERY in Micro max Canvas A111 jb4.1.2
WARNING: If your Micromax Canvas A111 smartphone gets bricked or gets damaged while following the tutorial given below, we shouldn’t be held responsible. Proceed at your OWN RISK.
I will try to keep this guide up to date. Please let me know if you find something wrong or missing
Content:
1) Introduction
2) How to root
3) How to flash recovery
4) FAQs (ADB, Loki, Download Mode, Go to Recovery etc.)
5) Troubleshooting (unbricking)
1) Introduction:
Micromax Canvas Doodle a111 is a 3G Android smartphone with a 5-inch TFT HD Touchscreen display. The phone is powered with 1.2 GHz Quad-Core Processor and it runs on Android 4.1.2 Jelly bean OS. With 8 mega pixel rear view camera, the phone offers high quality image capturing. If you are looking for a smartphone under 10000 INR with good features, then Micromax Canvas A111 would be the ideal choice!
If you are a user of Micromax Canvas Doodle a111 and would like to gain root access for installing rooted apps or custom ROM’s, then the following tutorial will help you. I have given step by step instructions for rooting A111 smartphone below
2) How to root:
Prerequisites To Root Micromax Canvas A111 Smartphone​1. Take complete backup of your personal data in the Micromax device using appropriate apps. Although the root process won’t affect them, its safe to keep a backup.
2. Remove all the Antivirus applications installed on your smartphone for virus protection since sometimes they will cause trouble while the rooting process is going on.
3. Charge your phone battery and keep its backup level above 80% as the rooting process drains the battery. If you don’t have enough battery backup and your device gets switched off during the rooting, then surely it will get bricked. Avoid it by having a good battery backup.
4. ***Enable USB Debugging mode in your device by following the path: Settings -> Developer Option -> USB Debugging.
5. *** Make sure you have drivers for your phone Download from here http://www.androidrootguide.com/micromax-usb-driver-download-get-drivers-micromax-smartphones
Once you have done all the above mentioned tasks, you can move on to the rooting tutorial given below.
download any one application from bellow links
1. For VROOT :: click here
2. For Root Genius:: click here
Tutorial To Root Micromax Canvas A111
> To get started, download VROOT / Root Genius from bellow link and install it on your computer. Once installed, open the application.
> Now connect your Micromax Canvas A111 smartphone to the computer using the “USB Debugging Mode”. If you have installed the required USB drivers for your phone on the computer, then the VROOT application will automatically detect your smartphone.
> Now just click on the “Root” button shown on the VROOT / Root Genius window and let the rooting process begin. The smartphone will get restarted several times during the process. So, don’t panic. Once the rooting process is finished, the device will reboot for one more time.
> Thats it. Now you have successfully rooted your Micromax Canvas A111 smartphone. If you want to confirm whether you have successfully rooted or not, use the “Root Checker” app. If you encounter any issues while following this rooting tutorial, do let me know via comments.
****** if u not able to understand the above please click on the Link it will more easy http://rjpraveen.blogspot.in/2014/08/how-to-root-micromax-canvas-doodle-a111.html
3) How to flash recovery:
To install ROM’s and Kernels you need a custom recovery already you learned how to ROOT Device from above information now its the time to use unlocked boot loader to your device k lets move through the part
and
to flash recovery no need root access don't bother if u are rooted or unrooted. if you are unrooted then also you can do it i provide both information for rooted and unrooted users
Things needed before flashing:
1. Proper drivers (see section 1)
2. ADB. There are various ways to get it but don't worry about size and installation i marked it small and easy
3. Required Recovery images(TWRP/CWM/STOCK & MIUI) provided link bellow.
4. Basic Knowledge on PC..
NOTE:: I am not responsible for bricked devices.
Download Recovery image files from billow links
CWM Recovery :: Download the img for your device here
TWRP Recovery :: Download the img for your device here
MIUI Recovery :: Download the img for your device here
STOCK Recovery :: Download the img for your device here
This Step for Rooted Users Only
Download Flashify from Google Play here
(before follow this step please ensure that your battery device has more 50% in case of out of battery during this process)​
1) Use Flashify Application:
This program required Root Permission and it free with limited functioned that can install Custom Recovery 3 times a day. If need more please support dev.
2) Make sure you hit “Allow” when Superuser request window pops up when opening the Flashify app.
3) Choose “Recovery image” for recovery images like CWM or TWRP. (You could even flash stock recovery images and unroot btw.)
4) Next, choose the file you want to install by choosing “Choose a file”.
5) Choose one of the Recovery Download CWM or TWRP or OTHER but I recommended TWRP
6) Browse your storage and choose the IMG file you want to flash.
7) Choose “Yup”. That’s it!
if u want to See more Detailed Information with image presentation click here
This Step for Rooted/NON Rooted Users also
>>>> Download ADB Required files from here
if u want to watch video how to install click here
1> Enable USB debugging mode in ur device
for this(go to setting >> developer Options >> tick usb debugging)
2> Switch off your device and start it in ""fast boot"" mode
for this Switch off device after this
Hold (Volume down + Power Button) both at same time it will show canvas logo with top blue LED above sensor
that's it it means that now your device in fast-boot mode
3> Now connect your mobile to PC with the data cable it will automatically install drivers if not install drivers manually download from above section 1
4> Now get back to PC navigate to download folder it contains 2 folders
1.fast boot files and
2.Recovery Images
now copy recovery which one u want from "Recovery Images" folder to "fast boot files" folder
(stock -- default what MMX device provides)
(CWM/TWRP/MIUI Custom recoverys)
then rename the copied file with name "recovery"
5> Now open "fast boot files" folder at this time in keyboard hold "shift button and click right mouse button" at a time with in the folder
(don't select any file first just left click on white space then proceed "shift+right mouse click at a time")
6> with in this choose option "Open Command Window Hear" then type command
command is
Code:
fastboot flash recovery recovery.img
​ now it show to "okay" messages
now type command
command is
Code:
fastboot reboot
​
7> wait until Ur home screen available on device then disconnect from PC that it enjoy recovery
4) FAQs:
1. HOW TO CHECK WHETHER I ROOTED OR NOT ?
A. Don't worry there is a lot of options to check root access on of that is easy Download "Root Checker" from Google Play and follow procedure in app
2. WHEN FOR ROOTING I CONNECT DEVICE NOTHING PROCESSING ?
A. Install drivers Perfectly and check data cable
3. HOW TO ENTER FAST BOOT MODE?
A. Take Look its easy but small confusion is device started in fast boot mode or not when in fastboot mode its just showing blue led and logo and stuck at logo its enough device in fastboot mode
to switch on fastboot mode(Volume down + Power Button)
4. HOW TO ENTER INTO RECOVERY MODE AFTER INSTALL OR CHECK IT?
A. just Switch off device and press (Volume UP + Power Button) wait until it show recovery don't leave keys
5. HOW TO BACK UP EXISTING ROM?
A. just enter into recovery choose backup option that's it it will place folder according to Ur recovery in SD
5) Troubleshooting
a)Unbricking
If you are reading this you have a problem. Your phone has become a brick. But do not despair yet as there are a few ways to unbrick your phone. Let us first determine whether it is a soft brick or a hard one.
**Soft Brick: Basically it means your phone is bootlooping or showing a blank screen but you can still go to recovery/download mode. The easiest way to fix this (and determine if you have a soft vs hard brick) is turn off the phone and then press the volume up button and powerbutton (keeping vol up pressed). If you see recovery no problem flash stock rom
**Hard Brick: If you cannot enter download or recovery mode then you may have a hard-brick. This is not a fun situation to be in but there is a fix that may work. It involves lots of linux commands and is not for newbies but then if you are hard-bricked what have you got to lose.
Here is the guide done by ChinmaySharma to get back if u hard bricked
http://forum.xda-developers.com/showthread.php?t=2901983
For Video Review to Unbrick watch here in this link in you tube https://www.youtube.com/watch?v=35E21Vi_ddE
Enjoy New Tricks Don't put face like this if u got any stuck at any where just ping me ill make u like :fingers-crossed:

Hi I tried to flash one of your ROM and it displayed bricked cant help and when i reboot it stuck with boot image of canvas. can you please help me

hii..thanks for this...but i soft bricked my phone
when i connect my phone to pc to install drivers....it is showing unknown usb device (device descriptor request failed)
please help me out

thanks sir i am doing it right
I was not able to Flash my drive but becz i have taken Fast boot file from another place and recovery file from another place. But you did the right thing everything going right and i am able to install rom in my micromax A111. Thank you so much sir. I appreciate your hard work.