Hi everyone, I have been searching this forum to find a CWM that is compatible with KitKat and the infuse 4g. I tried the ROM manager app, but this device is not compatible. Plus I'm trying to meet the post requirement before I can ask this question in dev forum...not a great rule. cuz that way i have to post 10 posts that i don't want to post before I post the one I want.
beofonemind said:
Hi everyone, I have been searching this forum to find a CWM that is compatible with KitKat and the infuse 4g. I tried the ROM manager app, but this device is not compatible. Plus I'm trying to meet the post requirement before I can ask this question in dev forum...not a great rule. cuz that way i have to post 10 posts that i don't want to post before I post the one I want.
Click to expand...
Click to collapse
you just have to flash the roms from the base rooted GB with CWM/RED recovery then update GB ---> ICS----->JB----->KK and the CWM version updates itself and each KK rom has its own CWM version
Thanks.
Thank you.
Young_Azul said:
you just have to flash the roms from the base rooted GB with CWM/RED recovery then update GB ---> ICS----->JB----->KK and the CWM version updates itself and each KK rom has its own CWM version
Click to expand...
Click to collapse
Do you need to flash in that order.. GB > ICS > JB > KK ? because I just flashed GB with CWM then to whatever next rom happen to be without issue. Each version got it's own kernel/cwm so why need to go thru all that. Just curious.
scmfxt said:
Do you need to flash in that order.. GB > ICS > JB > KK ? because I just flashed GB with CWM then to whatever next rom happen to be without issue. Each version got it's own kernel/cwm so why need to go thru all that. Just curious.
Click to expand...
Click to collapse
its recommended....i have tried to jump from gb to kk before but then it wouldn't boot the rom so i put into download mode and went back to stock gb the went to ics then jb then every kk rom out there
Hmm.. weird because I have no issue jumping from GB to the current KK or any other rom.. you just need to turn lagfix off b4 u install other rom.
scmfxt said:
Hmm.. weird because I have no issue jumping from GB to the current KK or any other rom.. you just need to turn lagfix off b4 u install other rom.
Click to expand...
Click to collapse
is yours the rogers or AT&T one?
AT&T
scmfxt said:
AT&T
Click to expand...
Click to collapse
so is mine thats strange that yours has no problem doing it while mine does
Young_Azul said:
so is mine thats strange that yours has no problem doing it while mine does
Click to expand...
Click to collapse
ok.. I just re-flash to stock a few minutes ago and flash kernel for cwm.. now will install the new 4.4.3 and Gapps. And not going go thru ICS or JB.
scmfxt said:
ok.. I just re-flash to stock a few minutes ago and flash kernel for cwm.. now will install the new 4.4.3 and Gapps. And not going go thru ICS or JB.
Click to expand...
Click to collapse
So I'm guessing your going with CarbonRom's 6/15 nightly?
Sent from my SGH-I997 using XDA Premium 4 mobile app
yep.. let see what 4.4.3 has to offer. Got a couple of days to play around.
For some devices flashing straight from stock just works. If you have red CWM it is a bad candidate and should use ICS as an intermediary. But you can be on GB and not have red CWM (rather blue or green I forget which), as was the case when I first flashed up. This may be your case as well.
Its not the version of the OS that matters, rather the spread of CWM versions. At least that is my understanding of the situation.
Sent from my MyTouch 4G Slide using XDA Free mobile app
I think it's a matter of steps you take from GB to the next rom. For me:
1. GB stock with root.
2. Install sgs kernel flash and flash kernel with CWM (Synthesis).
3. Go into CWM and disable lagfix if it's enabled.
4. Update your flavor rom in recovery mode. NOTE: You will need to flash twice since 1st time give you a warning about partitions.
5. Once flashed it will auto reboot.... HERE you need to remove the battery to power off.. put battery back in and go into recovery mode and flash the rom again since the previous flash only install the new recovery.
6. Install Gapp.
7. CWM: wipe Cache Partition
8. CWM: Advanced > wipe Dalvik Cache
9. Reboot.
scmfxt said:
I think it's a matter of steps you take from GB to the next rom. For me:
1. GB stock with root.
2. Install sgs kernel flash and flash kernel with CWM (Synthesis).
3. Go into CWM and disable lagfix if it's enabled.
4. Update your flavor rom in recovery mode. NOTE: You will need to flash twice since 1st time give you a warning about partitions.
5. Once flashed it will auto reboot.... HERE you need to remove the battery to power off.. put battery back in and go into recovery mode and flash the rom again since the previous flash only install the new recovery.
6. Install Gapp.
7. CWM: wipe Cache Partition
8. CWM: Advanced > wipe Dalvik Cache
9. Reboot.
Click to expand...
Click to collapse
Because I have the Rogers variety, my step 2 uses a different product (the name escapes me but I use ODIN to flash it) and I was able to skip over step 3 (not sure if it was even an option). Overall I had red CWM, but the first time CWM was green (or blue). I think the difference in versions had to do that I installed ROM Manager the first time around and tried to install the i9000 (or something) CWM image. It wasn't successful, but it looks like it made some impact.
Out of curiousity, what colour was your CWM in Gingerbread? Synthesis may be using a newer (more forgiving) version.
red cwm 2.5.1.3 after the kernel flashed.
Related
So I upgraded to clockworkmod recovery version 3.0.0.5 to try out the beta version of Cyanogenmod 7.
Anyway, it's waaay too buggy for me at the moment (random battery drainage and restarts) and I'd like to go to a different custom rom.
The problem I'm having is that clockworkmod versions > 3 apparently will only install ROMs that were compiled with Edify scripting... which appears to be just about none of the ROMs I'm interested in at the moment.
So I've tried downgrading through the ROM manager and through running flash_image on the phone's terminal several times - always landing me back in the orange coloured CWM v3.0.0.5.
So my question is; how would I get back to the older green coloured version of the recovery?
I've searched a couple of hours on the internet now, but have found almost nothing relating to the Samsung Galaxy Captivate.
Any help would be greatly appreciated.
Thanks!
Just flash back to stock. Reroot if u need to then use rom manager to flash it
Sent from my SGH-I897 using XDA Premium App
Ownaginatious said:
So I upgraded to clockworkmod recovery version 3.0.0.5 to try out the beta version of Cyanogenmod 7.
Anyway, it's waaay too buggy for me at the moment (random battery drainage and restarts) and I'd like to go to a different custom rom.
The problem I'm having is that clockworkmod versions > 3 apparently will only install ROMs that were compiled with Edify scripting... which appears to be just about none of the ROMs I'm interested in at the moment.
So I've tried downgrading through the ROM manager and through running flash_image on the phone's terminal several times - always landing me back in the orange coloured CWM v3.0.0.5.
So my question is; how would I get back to the older green coloured version of the recovery?
I've searched a couple of hours on the internet now, but have found almost nothing relating to the Samsung Galaxy Captivate.
Any help would be greatly appreciated.
Thanks!
Click to expand...
Click to collapse
Coming from CM7 you will have to return to stock before you can flash any other roms anyway. Its in the CM7 FAQ.
Ownaginatious said:
Anyway, it's waaay too buggy for me at the moment (random battery drainage and restarts) and I'd like to go to a different custom rom.
Thanks!
Click to expand...
Click to collapse
Ok I see that you have only 2 posts so I am going to spell this out nicely.
1: Flash back to stock always when changing roms
2: Root the phone then load rom manager and install clockwork mod
3: That puts an update.zip on your internal sd card. Copy that to your computer in a safe directory. I put mine where I store my roms
4: Reboot your phone to recovery and install upadate.zip. Reboot to recovery and if CWM doesn't load install update.zip again and it will reboot to CWM the second time.
5: Then when you want to flash a rom flash back to stock then copy that update.zip to the phone copy the rom to the phone then reboot to recovery. If it doesn't reboot to CWM then install update.zip and it will reboot to CWM. Then you can install your rom.
MAKE SURE YOU FLASH BACK TO STOCK BEFORE ATTEMPTING A NEW ROM INSTALL.
zelendel said:
Coming from CM7 you will have to return to stock before you can flash any other roms anyway. Its in the CM7 FAQ.
Click to expand...
Click to collapse
and check repartition when flashing according to the CM7 faq
zelendel said:
Coming from CM7 you will have to return to stock before you can flash any other roms anyway. Its in the CM7 FAQ.
Click to expand...
Click to collapse
Why would anyone read the faq...
Sent from my SAMSUNG-SGH-I897 using XDA App
Sarcoid said:
and check repartition when flashing according to the CM7 faq
Click to expand...
Click to collapse
One click does it automatically.
Sent from my CM7 powered captivate
Hi,
Im pretty new to Droid phones and I have had my Droid Charge for a couple of months now. Its pretty much untouched and factory stock verison. I been reading alot of the post and some it can be confusing. My question is coming from stock verison what would be the ideal and easiest upgrade?
I see alot of news on Honeycomb,Gummycharge etc.. what would be my best bet and what are the advantages chosen one over the other thanks in advance
babyjake said:
Hi,
Im pretty new to Droid phones and I have had my Droid Charge for a couple of months now. Its pretty much untouched and factory stock verison. I been reading alot of the post and some it can be confusing. My question is coming from stock verison what would be the ideal and easiest upgrade?
I see alot of news on Honeycomb,Gummycharge etc.. what would be my best bet and what are the advantages chosen one over the other thanks in advance
Click to expand...
Click to collapse
I would suggest waiting until tonight when GummyCharged 2.0 drops, it's gonna be the ultimate tweakable rom it'll be rooted, give you CWM and a custom voodoo kernel, plus a sweet better-than-stock rom
blazing through on my 4G Droid Charge
anoninja118 said:
I would suggest waiting until tonight when GummyCharged 2.0 drops, it's gonna be the ultimate tweakable rom it'll be rooted, give you CWM and a custom voodoo kernel, plus a sweet better-than-stock rom
blazing through on my 4G Droid Charge
Click to expand...
Click to collapse
thanks - can i intstall that from stock
babyjake said:
thanks - can i intstall that from stock
Click to expand...
Click to collapse
Not at first because it's going to be released a CWM recovery flashable zip. If you go to the Charge developer forum and Odin over the latest CWM recovery by Imnuts, you will be able to install it easily when it is released.
hazard209 said:
Not at first because it's going to be released a CWM recovery flashable zip. If you go to the Charge developer forum and Odin over the latest CWM recovery by Imnuts, you will be able to install it easily when it is released.
Click to expand...
Click to collapse
So basically I will need to install a previous Odin verison with CWM and when this comes out I just install the CWM as a recovery is that correct ?
babyjake said:
So basically I will need to install a previous Odin verison with CWM and when this comes out I just install the CWM as a recovery is that correct ?
Click to expand...
Click to collapse
Close. You don't need to install the previous version (1.9.1) but you can if you want to. You just have to Odin over the latest CWM recovery (this will root your phone). When the 2.0 zip is released then you just place it on your SD card, enter recovery by holding volume up + home + power until the SAMSUNG logo flashes twice and then choose to install zip from SD card. Make sure to do a factory reset, and wipe the cache partition and dalvik cache (under advanced) before flashing the zip in recovery. You may not understand all of that now, but when you're in recovery mode it will make sense.
hazard209 said:
Close. You don't need to install the previous version (1.9.1) but you can if you want to. You just have to Odin over the latest CWM recovery (this will root your phone). When the 2.0 zip is released then you just place it on your SD card, enter recovery by holding volume up + home + power until the SAMSUNG logo flashes twice and then choose to install zip from SD card. Make sure to do a factory reset, and wipe the cache partition and dalvik cache (under advanced) before flashing the zip in recovery. You may not understand all of that now, but when you're in recovery mode it will make sense.
Click to expand...
Click to collapse
I see so root the phone and install the latest clockwork mod from app store and then when gummy charge 2.0 comes out go into recovery and install is that right ?
babyjake said:
I see so root the phone and install the latest clockwork mod from app store and then when gummy charge 2.0 comes out go into recovery and install is that right ?
Click to expand...
Click to collapse
Everything except the market. Get CWM here. Installing that CWM will root your phone for you.
hazard209 said:
Everything except the market. Get CWM here. Installing that CWM will root your phone for you.
Click to expand...
Click to collapse
So what a sec you telling me all i have to do is use odin and this file ? Dont need to do all that altered beast stuff
babyjake said:
So what a sec you telling me all i have to do is use odin and this file ? Dont need to do all that altered beast stuff
Click to expand...
Click to collapse
You don't need to touch Altered Beast unless you want it. I'm fairly certain that using Odin to flash CWM will provide root (I haven't done it in a long while). If it does not, after flashing CWM, just install this zip from your SD card in recovery and that will provide root.
SWEET TY !
babyjake said:
SWEET TY !
Click to expand...
Click to collapse
No problem chief. Feel free to post back with any question.
If you are on the stock kernel you will need to boot directly to recovery and flash the SU .zip after odin CMW, or else the recovery will be overwritten by the stock kernel.
Your best bet is to wait till GC FE 2.0 is released, then odin CWM, and boot direct to recovery and flash the 2.0 .zip. then you are done in a couple steps.
That'll work too.
so now the waiting game begins lol
i am a dangerous noob =(
i am trying to flash my skyrocket to [ROM][RADIO]UCLA3 2.3.6 STOCK ROM(NOciq)/UCLA3 Modem/FEB 24
i know how to boot to recovery mode so far...
i got the rom and radio downloaded....
can anyone suggest a good tutorial? i tried youtubing skyrocket custom rom installation and i see mostly s2 w/ the middle button that i don't have.
also, how to i not trip the flash counter as someone said it was very annoying to have that on the phone?
and yes this will be my first time flashing my phone. i don't want to have a expensive brick in the end
unlockingsky said:
i am a dangerous noob =(
i am trying to flash my skyrocket to [ROM][RADIO]UCLA3 2.3.6 STOCK ROM(NOciq)/UCLA3 Modem/FEB 24
i know how to boot to recovery mode so far...
i got the rom and radio downloaded....
can anyone suggest a good tutorial? i tried youtubing skyrocket custom rom installation and i see mostly s2 w/ the middle button that i don't have.
also, how to i not trip the flash counter as someone said it was very annoying to have that on the phone?
and yes this will be my first time flashing my phone. i don't want to have a expensive brick in the end
Click to expand...
Click to collapse
As long as you don't flash via Odin you will not increment the counter. Flashing via clockworkmod recovery is safe.
The first post of the thread where u downloaded from has instructions on how to flash. Please read it again.
Sent via smoke signal
unlockingsky said:
i am a dangerous noob =(
i am trying to flash my skyrocket to [ROM][RADIO]UCLA3 2.3.6 STOCK ROM(NOciq)/UCLA3 Modem/FEB 24
i know how to boot to recovery mode so far...
i got the rom and radio downloaded....
can anyone suggest a good tutorial? i tried youtubing skyrocket custom rom installation and i see mostly s2 w/ the middle button that i don't have.
also, how to i not trip the flash counter as someone said it was very annoying to have that on the phone?
and yes this will be my first time flashing my phone. i don't want to have a expensive brick in the end
Click to expand...
Click to collapse
I assume your phone is rooted and CWM installed.
1. Reboot in CWM ( turn off your phone , then press both volume keys and press power wait for samsung logo and relese all buttons)
2. go to backup and restore and buckaup your phone just in case go back
3. Wipe data/factory reset
4. Wipe cache partition
5. go to mount and storage and format system go back to main menu
6. install zip from sdcard
7. choose zip from sdcard
8. flash rom
10 . go back to to main menu and go to advance wipe there Dalvik Cache
11. back to main menu and reboot system now.
Wait for full reboot setup whatever you need to setup. If after rom and modem flash you will have no mobile data reflash rom again.
Good luck
6.
my phone is root on stock firmware.
cwm = clockworkmod?
i see cwm on the market.. which version i should use?
https://market.android.com/search?q=clockworkmod
unlockingsky said:
my phone is root on stock firmware.
cwm = clockworkmod?
i see cwm on the market.. which version i should use?
https://market.android.com/search?q=clockworkmod
Click to expand...
Click to collapse
Download the rom manager app from the market. There is an option to flash cwm from there. Flash the one for the T-Mobile skyrocket.
Sent via smoke signal
Use this one https://market.android.com/details?...yLDEsImNvbS5rb3VzaGlrZHV0dGEucm9tbWFuYWdlciJd
thank you all, i have successfully upgrade to 2.3.6 stock... i will play with custom roms later.
Noob question
cdshepherd said:
ok folks we finally made it. silver has been busting his butt for the past three days, mucho thanks to him.
STOCK ZIPALIGNED UCLA3 2.3.6 ROM---https://www.sugarsync.com/pf/D7693548_2736667_990900
Rom mirror---http://hotfile.com/dl/147732791/c4551c4/UCLA3_2.3.6_rom.zip.html
Wipe data/factory reset
Wipe cache/dalvik
Format /system(under mounts and storage in cwm)
Flash rom
Reboot
Enjoy
Carrier IQ is not present in the stock rom
2.3.6 UCLA3 Stock kernal included in zip
STOCK UCLA3 MODEM --- http://www.mediafire.com/?h7bnu7kvpw7dqtg
Modem mirror https://www.sugarsync.com/pf/D7693548_2736667_990795
Wipe cache partition
Wipe dalvik cache
Reboot
Enjoy
NOTE: Many people have already experienced better signal/data speeds with the stock 2.3.6 UCLA3 Modem/kernal combo. Personally my data speeds went from 3-4mbs up to 8-9mbs after flashing UCLA3 Modem/Kernal combo. The more feedback on this the better.
Good Luck! Look forward to hearing your feedback
Click to expand...
Click to collapse
Sorry for the noob question but are we suppose to flash both files? The ROM and MODEM ?
desilva79 said:
Sorry for the noob question but are we suppose to flash both files? The ROM and MODEM ?
Click to expand...
Click to collapse
You can flash/run various modems, kernels, and rom combinations depending on your particular wants and needs. If you want to stay close to stock, and take advantage of the symbiotic relationship between the UCLA3 rom, kernel, radio, then yes flash both UCLA3 files in cdshepherd's OP. (his ROM has the kernel included). I would suggest flashing modem (radio) first... reboot.. then boot back into CWM to flash rom. For me (and others) when the modem is flashed after rom, the data connection is lost. Follow the install instructions in the OP of the rom. Also, take a look at silver03wrx's Silver_Rom... it's stock UCLA3 but he'll be theming/deodexing it going forward. By the way, I found my HPSA+ speeds significantly increase using the combination of the UCLA3 kernel and modem. Good luck... hope this helped.
Thanks a lot DoctorQMM. That helps a lot . I think I want to stay as close to stock as possible right now while waiting for ICS. I just took the plunge and rooted my phone for the first time so I'm learning as much as I can via google/xda but sometimes I need reassurance just to make sure I don't brick the phone while doing something stupid.
I tried many methods mentioned in Road map to install ICS rom. But no success.
Currently : I am at GB 2.3.6 UCLB3 with root and CWM V2.5.1.3
other specs :
Firmware : 2.3.6
Baseband : I997UCLB3
Kernel : 2.6.35.7-I997RUXKG3-CL366622
Buid : Gingerbread.UCLB3
While on Download Mode I get these messages :
custom binary Download : Yes (1 count)
Current Binary : CUSTOM
Please help with next steps to install ICS ROM like AOKP or MIUI. ??
Also suggest for which ICS to go ?
Can u plz provide more details as how u tried to install the ICS and what error u faced ?
rkkaranrk said:
Can u plz provide more details as how u tried to install the ICS and what error u faced ?
Click to expand...
Click to collapse
After this I downloaded AOKP ROM and through CWM I flashed. No error Message but got stuck up at SAMSUNG load screen. Tried second time also. No chance.
harismahesh said:
After this I downloaded AOKP ROM and through CWM I flashed. No error Message but got stuck up at SAMSUNG load screen. Tried second time also. No chance.
Click to expand...
Click to collapse
Hanging on the Samsung screen is normal when coming to AOKP from Gingerbread, you need to double flash here's how:
Flash the ROM like normal in CWM, when it reboots and you hang at the Samsung screen use the 3 finger method to get into Recovery (hold power & both Volume buttons). Once there go the Mounts and Storage option and format system, data, and cache...then reflash the ROM again (you may also have to flash the latest gapps if your not using an Aroma installer) reboot and you should be gtg.
it doesn't hang for me
harismahesh said:
After this I downloaded AOKP ROM and through CWM I flashed. No error Message but got stuck up at SAMSUNG load screen. Tried second time also. No chance.
Click to expand...
Click to collapse
brother did you read the op....but just like Smokestack360 posted....try to read his directions....attention to detail...and you will be GTG!
I don't mean to be an [email protected]@ and I apologize if I do...but this is your investment, your phone....I personally read and re-read...and sometimes get my wife to read it...btw she hates that...LOL,
How to Install - Coming from NON ICS Rom
Download Rom and latest Google Apps and enter recovery
Wipe/Factory Reset
Flash rom zip file
Reboot...will hang on kernel splash screen
Use three-button method to enter recovery mode
Go to mounts and storage and format system, data, and cache
Reflash rom
Flash Gapps
Reboot
Please Guide me to Install MIUI ROM .
Currently I am on :
Currently : I am at GB 2.3.6 UCLB3 with root and stock 3E
other specs :
Firmware : 2.3.6
Baseband : I997UCLB3
Kernel : 2.6.35.7-I997RUXKG3-CL366622
Buid : Gingerbread.UCLB3
I tried with Entropy DD Kernel and it soft bricked my phone. So I reverted back. Then only I saw it wont work for MIUI. Right now i am on stock 3E ( not modified) with root.
Please guide me to put MIUI ROM. I didnt find any help in MIUI ROM thread.
harismahesh said:
I tried with Entropy DD Kernel and it soft bricked my phone. So I reverted back. Then only I saw it wont work for MIUI. Right now i am on stock 3E ( not modified) with root.
Please guide me to put MIUI ROM. I didnt find any help in MIUI ROM thread.
Click to expand...
Click to collapse
Use Odin or Heimdall to get cwm recovery then follow the steps in the above posts. I think u might even b able to get cwm recovery via the ROM manager app but think that it isn't the recommended method.
When coming from GB, u have to flash twice. That's why u were stuck at the Samsung logo before.
All ics ROMs are flashed the same way so read through the first posts of dev threads. Although the instructions will b the same as provided above.
Edit: And don't try to use a different kernel right off the bat. The one provided with the ROM is usually provided bc it works best.
Sent from my SGH-I997 using xda app-developers app
benbos_06 said:
Use Odin or Heimdall to get cwm recovery then follow the steps in the above posts. I think u might even b able to get cwm recovery via the ROM manager app but think that it isn't the recommended method.
When coming from GB, u have to flash twice. That's why u were stuck at the Samsung logo before.
All ics ROMs are flashed the same way so read through the first posts of dev threads. Although the instructions will b the same as provided above.
Edit: And don't try to use a different kernel right off the bat. The one provided with the ROM is usually provided bc it works best.
Sent from my SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
For Recovery I can use Entropy Daily Driver, But that wont work for MIUI. SO where I can a Kernel which contains CWM for MIUI.
harismahesh said:
For Recovery I can use Entropy Daily Driver, But that wont work for MIUI. SO where I can a Kernel which contains CWM for MIUI.
Click to expand...
Click to collapse
If u look in the "ISET Infuse everything" thread that's stickied in the dev section, there is Odin or Heimdall one click which both will give u cwm recovery.
I'm not familiar with entrophy's daily driver but I thought it was just a GB kernel, which is why it wouldn't work with that miui version bc it is ics.
Edit: I know most (and I believe all) ROMs will have a kernel packaged with them so u can just flash the ROM to get a working kernel. But bc it coming from GB, u need to follow the instructions provided above and flash twice. The reason I am saying use Odin is bc u said u have 3e recovery and I believe that u need to get cwm recovery first. I may b wrong about that tho.
Sent from my SGH-I997 using xda app-developers app
benbos_06 said:
Use Odin or Heimdall to get cwm recovery then follow the steps in the above posts. I think u might even b able to get cwm recovery via the ROM manager app but think that it isn't the recommended method.
When coming from GB, u have to flash twice. That's why u were stuck at the Samsung logo before.
All ics ROMs are flashed the same way so read through the first posts of dev threads. Although the instructions will b the same as provided above.
Edit: And don't try to use a different kernel right off the bat. The one provided with the ROM is usually provided bc it works best.
Sent from my SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
You've got that wrong
I flashed cm9 on red cwm and it worked without the freeze screem
This kindle is on pure jelly bean
harismahesh said:
Please Guide me to Install MIUI ROM .
Currently I am on :
Currently : I am at GB 2.3.6 UCLB3 with root and stock 3E
other specs :
Firmware : 2.3.6
Baseband : I997UCLB3
Kernel : 2.6.35.7-I997RUXKG3-CL366622
Buid : Gingerbread.UCLB3
I tried with Entropy DD Kernel and it soft bricked my phone. So I reverted back. Then only I saw it wont work for MIUI. Right now i am on stock 3E ( not modified) with root.
Please guide me to put MIUI ROM. I didnt find any help in MIUI ROM thread.
Click to expand...
Click to collapse
Read post #4 and #6. That tells you how to flash a cm9 rom. I suggest, based only on my experience, flashing Entropy512's cm 9 build. Again, follow the instructions in post 4 and / or 6. I would not flash the current version of miui 4 as a new build will soon be posted. The instructions for flashing miui are in the OP.
GoSooners345 said:
You've got that wrong
I flashed cm9 on red cwm and it worked without the freeze screem
This kindle is on pure jelly bean
Click to expand...
Click to collapse
Sorry, to b politically correct, I should have said the majority of ppl have to flash twice.
Sent from my SGH-I997 using xda app-developers app
Yeah u have to flash it twice to get it work or else u will stuck in blue recovery.
Sent from my GT-I9300 using Tapatalk 2
Hello everyone. I have been away from the Android scene for awhile, and I am looking to make some changes to my VZW SGIII. I want to make sure that my current plan for upgrading makes sense and I was hoping someone here could help. Here are my current settings:
ROOTED, BOOTLOADER Unlocked, CWM installed
Android 4.2.2
Kernal: 3.4.53 Cyanogenmod
Baseband: I535VRLHE
Liquid Smooth v2.9
I would like to update my Modem, since my current option has absolutely terrible reception. According to what I have read, it seems that the best Modem option is MF1 firmware than do a ML1 Baseband update.
[Q1] Does this have to be performed with ODIN, or can I do this through CWM?
The other thing I would like to do is to update to KitKat. I have found a ROM I think I will like, C-RoM v6.5. The instructions from their thread:
"WIPE (wipe data/factory reset + wipe cache partition + Format System)
Install the ROM from internal sdcard
Select Rom Zip And Flash, then select GAPPS of choice (doesnt have to be from below, im using PA GAPPS myself...) And Flash
Reboot And Enjoy..."
[Q2] What is the best order of operations in order to ultimately end up with MF1 w/ ML1 modem and C-RoM 6.5?
Should I do all the modem updates first and then flash ROM? Thanks!
NoLaw said:
Hello everyone. I have been away from the Android scene for awhile, and I am looking to make some changes to my VZW SGIII. I want to make sure that my current plan for upgrading makes sense and I was hoping someone here could help. Here are my current settings:
ROOTED, BOOTLOADER Unlocked, CWM installed
Android 4.2.2
Kernal: 3.4.53 Cyanogenmod
Baseband: I535VRLHE
Liquid Smooth v2.9
I would like to update my Modem, since my current option has absolutely terrible reception. According to what I have read, it seems that the best Modem option is MF1 firmware than do a ML1 Baseband update.
[Q1] Does this have to be performed with ODIN, or can I do this through CWM?
The other thing I would like to do is to update to KitKat. I have found a ROM I think I will like, C-RoM v6.5. The instructions from their thread:
"WIPE (wipe data/factory reset + wipe cache partition + Format System)
Install the ROM from internal sdcard
Select Rom Zip And Flash, then select GAPPS of choice (doesnt have to be from below, im using PA GAPPS myself...) And Flash
Reboot And Enjoy..."
[Q2] What is the best order of operations in order to ultimately end up with MF1 w/ ML1 modem and C-RoM 6.5?
Should I do all the modem updates first and then flash ROM? Thanks!
Click to expand...
Click to collapse
In addition, I would also like to update my Kernal. Any suggestions as to where in this process I should update the Kernal (I would think at the end)? Also trying to decide between leankernal and KT747, anyone care to offer their experiences as far as stability, etc.?
You seem to have the right idea. All this can be install in recovery. Odin is not needed
You must update your recovery to the latest version. This is NOT Optional!
1. Wipe System & Data
1b. Flash MF1 firmware
1c. Flash ML1 modem
2. Flash ROM
3. Flash kernel (if you using something like KT747)
4. FLASH Gaaps
5. any addons
6. Reboot (if unstable reboot a 2nd time)
Sent from my SCH-I535 using Tapatalk
Sandman-007 said:
You seem to have the right idea. All this can be install in recovery. Odin is not needed
You must update your recovery to the latest version. This is NOT Optional!
1. Wipe System & Data
1b. Flash MF1 firmware
1c. Flash ML1 modem
2. Flash ROM
3. Flash kernel (if you using something like KT747)
4. FLASH Gaaps
5. any addons
6. Reboot (if unstable reboot a 2nd time)
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
Thank you. Which recovery should I update to first?
NoLaw said:
Thank you. Which recovery should I update to first?
Click to expand...
Click to collapse
It's up to you. You only use one recovery. If you like TWRP then just go grab the latest version and stick to it.
Sent from my SCH-I535 using Tapatalk
Sandman-007 said:
It's up to you. You only use one recovery. If you like TWRP then just go grab the latest version and stick to it.
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
EDIT: Found a zip file of CWM. Sorry! Thanks again!
Quick note, some people have been having problems with the ML/MF combo in that more then one text message can't be sent at a time. If you get one, you can send one, but only one. Some people have gone back back to MB1 modem/firmware for SMS support.
Just a heads up..
jeremy702 said:
Quick note, some people have been having problems with the ML/MF combo in that more then one text message can't be sent at a time. If you get one, you can send one, but only one. Some people have gone back back to MB1 modem/firmware for SMS support.
Just a heads up..
Click to expand...
Click to collapse
I dont understand, what is the problem exactly?