Database Info

need help with getting cm7 from kk4

Have a friend with the kk4 rom which is 2.3.5 . He wants cm7 but the instructions are vague, when he loads up rom manager it doesn't show captivate mtd but only shows the regular galaxy s i900 . What should I do from here ?

ROM manager really needs to die a horrible death and be erased from public memory.
Flash a custom kk4 kernel with Odin that has cwm built into it. Then flash cm7 from there.
No need to even root the damn thing let alone (attempt to) use crappy ROM manager that doesn't work on galaxy devices running over Android 2.1

studacris said:
ROM manager really needs to die a horrible death and be erased from public memory.
Flash a custom kk4 kernel with Odin that has cwm built into it. Then flash cm7 from there.
No need to even root the damn thing let alone (attempt to) use crappy ROM manager that doesn't work on galaxy devices running over Android 2.1
Click to expand...
Click to collapse
did the odin of the kernel samurai and it did its thing and when I reboot to get to recovery doesn't work now I can't even get into the rom

coldconfession13 said:
did the odin of the kernel samurai and it did its thing and when I reboot to get to recovery doesn't work now I can't even get into the rom
Click to expand...
Click to collapse
You may need to flash CM7 twice - A lot of times, the first flash just sets up the MTD file scenario, giving you the CWM you need. The second flash should finish installing it.

Yank battery and replace...hold Vol up Vol down and power til you see the boot screen and let go.
The button combos should work.

got it to work now just trying to load the gapps which seems to not be installing and for some reason it won't recognize the gapps arg this is the weirdest thing.

Just to clarify, if I'm on stock KK4 I can just flash a KK4 ROM with CWM and then CM7? I don't need to be on Froyo, as the CM wiki says?

ArttG12 said:
Just to clarify, if I'm on stock KK4 I can just flash a KK4 ROM with CWM and then CM7? I don't need to be on Froyo, as the CM wiki says?
Click to expand...
Click to collapse
Yes, you can

I need help installing gapps for some reason its not installing it after I load it into cwr . The latest gapps in cwr says its installing 2.3 5 if that means anything
Sent from my Galaxy Nexus using Tapatalk

coldconfession13 said:
I need help installing gapps for some reason its not installing it after I load it into cwr . The latest gapps in cwr says its installing 2.3 5 if that means anything
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
What is the filename of the zip you are trying to install for gapps?
When you say it isn't installing, does it say it completed and nothing happens, or is it failing? If it's failing, does it give you an error?

apbthe3 said:
What is the filename of the zip you are trying to install for gapps?
When you say it isn't installing, does it say it completed and nothing happens, or is it failing? If it's failing, does it give you an error?
Click to expand...
Click to collapse
gapps-gb-20110828-signed
it says completed but nothing shows up in the rom

coldconfession13 said:
gapps-gb-20110828-signed
it says completed but nothing shows up in the rom
Click to expand...
Click to collapse
Forgive me if you already know this, but it only installs apps that can't be downloaded from the market. If you have the market, it worked and you just have to download the rest of them. If you don't have the market, it definitely didn't work and, short of flashing back to stock and trying again, I don't have any other suggestions to troubleshoot it, unfortunately.

gapps-gb-20110930-237-signed
flashing that one fixed my problems thanks guys for helping

how do i downgrade cwm?

Rom: cm9
Cwm: 6.0.1.0 trying to get to 5.0.x in order to flash rom

xr1charxx said:
Rom: cm9
Cwm: 6.0.1.0 trying to get to 5.0.x in order to flash rom
Click to expand...
Click to collapse
Heimdall. See the second post in the oneclicks link in my signature.
Don't forget to read the OP for instructions.

bhundven said:
Heimdall. See the second post in the oneclicks link in my signature.
Don't forget to read the OP for instructions.
Click to expand...
Click to collapse
Second post only has kernels.
I'm lost. Haha.

xr1charxx said:
Second post only has kernels.
I'm lost. Haha.
Click to expand...
Click to collapse
You want to know how I know you cant read....because had you clicked on this link.
eollie: AntonX's BwaT + Stock Rom
Stock KJ6 + Antonx-One-Click.jar
You would have known it wasnt just a kernel...but then again reading is fundamentally hard on xda.

l
eollie said:
You want to know how I know you cant read....because had you clicked on this link.
eollie: AntonX's BwaT + Stock Rom
Stock KJ6 + Antonx-One-Click.jar
You would have known it wasnt just a kernel...but then again reading is fundamentally hard on xda.
Click to expand...
Click to collapse
I don't need stock rom I'm trying to flash Codename Android 2.0 which needs ICS and 5.0.2.x and that one click gives stock rom
how do i update to cm9 and staying on 5.0.2.x recovery
can i just update to cm9 then codename android without rebooting?
back to back flashing ?

xr1charxx said:
l
I don't need stock rom I'm trying to flash Codename Android 2.0 which needs ICS and 5.0.2.x and that one click gives stock rom
how do i update to cm9 and staying on 5.0.2.x recovery
can i just update to cm9 then codename android without rebooting?
back to back flashing ?
Click to expand...
Click to collapse
You can't update to cm9 and stay on 5.0.
Unlike most samsung phones, we do not have a functional recovery partition.
Even though we do have a recovery partition, and you can flash the recovery.img there, the bootloader will not even notice it.
It will just boot the kernel with the kernel command line argument: bootmode=2
In this mode, a stage1 init has to check if we are booting to: recovery, low power mode (charging), or normal boot (possibly with ota upgrade).
So in a nut shell, you upgrade to cm9, you get whatever recovery comes with cm9.
If you want to flash another cm9/ics based rom after that, just flash it (factory reset/wipe data, of course!). No need to go back to 5.0 recovery.
If however, your IMEI is screwed up or you have a specific reason to go back to gingerbread, use the oneclick that eollie mentioned. Flash it twice to get bootloaders. And then you can go back to cm9 by just 'factory reset/wipe data' and flash cm9 or whatever ics rom you wish.

I tried the one clicks but I end up having 6.0 cwm and no bootloader

xr1charxx said:
I tried the one clicks but I end up having 6.0 cwm and no bootloader
Click to expand...
Click to collapse
That didn't make any sense. If you don't have a bootloader, how do you know what cwm you have?

i guess i do have boot loader.
im on CM9. cwm 6.0.1.0 and all i want to do is install this rom.
[TUK's ROM][Hybrid]Codename Android 2.0
http://forum.xda-developers.com/showthread.php?t=1799192
can you please tell me how? :crying:
ive tried one clicking to stock then once clicking Antonx kernel.
but once i go to CM9 i get cwm 6.0 and when i try to once click the AntonX: Basic with a Twist SGS4G KJ6 1.1.0 i get boot loop.
and the eollie: AntonX's BwaT + Stock Rom link is broken.

Sorry about that I changed the link and thought it was the same. This is the correct link.
https://dl.dropbox.com/u/10373328/Stock KJ6 + root-One-Click.jar

so i go back to stock or can i just one click this from my CM9 cwm 6?

http://forum.xda-developers.com/showthread.php?p=2031989

xr1charxx said:
so i go back to stock or can i just one click this from my CM9 cwm 6?
Click to expand...
Click to collapse
Please read some more and understand what one clicking means. You could have cwm 3.x.x.x and if you flash the heimdall one clicks it will change to the current cwm for bml.

ive tried everything and i guess i have bad luck cuz i get boot loops or stuck on boot screen
:[

help pls! can i flash clockworkmod recovery files with odin??

ok so long story short i tried to flash my samsung infuse 4g with a rom from this website (ROM][Jellybean] CNA 3.5.0 for Samsung Infuse [PORT] ) i used to have froyo 2.2. all was well and then my phone just stopped working and wouldnt pass boot screen. but i saved my old rom's data with clockworkmod on my sd card. the thing is there are like 5 .tar files and i want to know if i can recover my old rom using odin since i cant even get passed the boot screen??? pls someone help me i'm freaking out, ive been googleing all night and i'm totally burnt out. the files i have are .android_secure.vfat.tar, cache.rfs.tar, data.rfs.tar, efs.rfs.tar, nandroid.md5 and system.rfs.tar...... pls someone show me how to fix my phone
thanks in advance

Don't think you can flash those files, but you should be able to go back to stock.
Sent from my sweet & buttery Infuse

Follow these instructions. I would use the zip that takes you back to stock with root.
Keep one thing in mind.....you CANNOT go from Froyo to JB.
http://forum.xda-developers.com/showthread.php?p=27286083#post27286083
I keep this thread bookmarked. I have soft bricked my phone so many times, it's not funny!!!
http://forum.xda-developers.com/showthread.php?t=1700416

Lack of reading/research caused your error :/
Anyways go back to stock with heimdall.or Odin, get red cwm again and you should be able to restore your backups
If you want to go to jb in the future....then you must first follow go to ics, then jb...you have to have ics before you can flash gb
Sent from my HTC PH39100 using Tapatalk 2

thanks again to all the comments, yes this was a big Noob mistake, i guess i was just way to excited to jump on the JB wagon. i have since returned to stock froyo using one of the kernals from this site (Stock_Root-Mod3e-UCKD5_Odin), so this is what i have now... although a little phased i still want to give this a second attemp. the rom i wanted to flash was [ROM][JellyBean] CNA 3.5.0 / Nightly 9/20 for Samsung Infuse [PORT]....
just to get things straight so i don't mess up again, i have to flash froyo with ics (is there a specific ics version i should get? on a how to guide on flashing jb i found this info: Entropy512's CM9 Kernel / Blue CWM Recovery 2012.05.02-ODIN-Entropy-CM9-zImage.rar) can i use this one, i prefer odin b/c i've never used heimdall. then after i flash ics then i can flash to jb.... but reading some threads i saw that....
"Currently on stock Froyo:
1) Use Heimdall or Odin to flash stock UCLB3 (GB)
*Reccomendation: Also flash GB bootloaders. See first post for links and warnings.*
2) Flash Entropy's DD kernel to obtain root and red CWM recovery.
Currently on stock GB:
1) Flash Entropy's DD kernel to obtain root and red CWM recovery."
do i have to do this step or can i go forward with the current Stock_Root-Mod3e-UCKD5_Odin that i now have installed....?
secondly, after i install ics, right before i flash jb it states i have to do an aroma prep....then flash jb.....
all flashes are done with clockworkmod and i wipe only cache and dalvik? or is there anything else i have to wipe?
sorry for all the questions, i have read and researched many threads but they are all pretty overwhelmingly full of lots of info.....just wanna get it in order....
thanks again
from froyo to ics i use odin, from odin to jb i use cwm, correct?

marielacvn said:
thanks again to all the comments, yes this was a big Noob mistake, i guess i was just way to excited to jump on the JB wagon. i have since returned to stock froyo using one of the kernals from this site (Stock_Root-Mod3e-UCKD5_Odin), so this is what i have now... although a little phased i still want to give this a second attemp. the rom i wanted to flash was [ROM][JellyBean] CNA 3.5.0 / Nightly 9/20 for Samsung Infuse [PORT]....
just to get things straight so i don't mess up again, i have to flash froyo with ics (is there a specific ics version i should get? on a how to guide on flashing jb i found this info: Entropy512's CM9 Kernel / Blue CWM Recovery 2012.05.02-ODIN-Entropy-CM9-zImage.rar) can i use this one, i prefer odin b/c i've never used heimdall. then after i flash ics then i can flash to jb.... but reading some threads i saw that....
"Currently on stock Froyo:
1) Use Heimdall or Odin to flash stock UCLB3 (GB)
*Reccomendation: Also flash GB bootloaders. See first post for links and warnings.*
2) Flash Entropy's DD kernel to obtain root and red CWM recovery.
Currently on stock GB:
1) Flash Entropy's DD kernel to obtain root and red CWM recovery."
do i have to do this step or can i go forward with the current Stock_Root-Mod3e-UCKD5_Odin that i now have installed....?
secondly, after i install ics, right before i flash jb it states i have to do an aroma prep....then flash jb.....
all flashes are done with clockworkmod and i wipe only cache and dalvik? or is there anything else i have to wipe?
sorry for all the questions, i have read and researched many threads but they are all pretty overwhelmingly full of lots of info.....just wanna get it in order....
thanks again
from froyo to ics i use odin, from odin to jb i use cwm, correct?
Click to expand...
Click to collapse
Follow all steps, don't skip a thing. As for wiping, wipe Cache, Data, Dalvik, and format /System when going from GB to ICS and ICS to JB. That UCLB3 file is Gingerbread stock and you have to go to gingerbread before you go to ICS.
Also, if you are confident that your phone won't get disconnected from Odin while flashing the UCLB3 file, flash the GB bootloaders while you're at it. If the flash fails while flashing bootloaders then your device is bricked so be sure about Odin before you flash them.
Sent from my SGH-I997 using xda app-developers app

Since you have already used Odin, I would use option "C". The best thing you can do is read everything two or three times. There are also many vids on YouTube that are helpful.
Once you are on GB.....just pick out any ICS ROM an flash it. Once it installs, I wouldn't even bother sitting it up and then you can go to JB.
Th3Bill uses an Aroma installer in his ROMs and the first time you use it, you will have to flash his aroma-prep first.
Hang in there....go slowly...and read. This gets easier and easier the more you do it. I always just d/l the zips to my phone and never even have to mess with the PC.
http://forum.xda-developers.com/showthread.php?t=1613523
Edit: All of his ROMs for the Infuse can be found and d/l at Jokersax.com
Edit: I just reread your post......once you are on GB, you won't use Odin again. You will use whatever ICS zip to flash your ROM using CWM. Same thing with JB.

Shawn said:
Follow all steps, don't skip a thing. As for wiping, wipe Cache, Data, Dalvik, and format /System when going from GB to ICS and ICS to JB. That UCLB3 file is Gingerbread stock and you have to go to gingerbread before you go to ICS.
Also, if you are confident that your phone won't get disconnected from Odin while flashing the UCLB3 file, flash the GB bootloaders while you're at it. If the flash fails while flashing bootloaders then your device is bricked so be sure about Odin before you flash them.
Sent from my SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
okay i think i understand....never has my phone disconnected during a flash with odin, ive always gotten a straight pass...exactly how important are the bootloaders anyways? if failures happen b/c of faulty usb cords, then im good...if bricking happens b/c of "unlucky chance" then id rather avoid it.... either way ill start the whole process tonight after i put the kiddos away so i can concentrate 100%.
thanks again for the tips

dparrothead1 said:
Since you have already used Odin, I would use option "C". The best thing you can do is read everything two or three times. There are also many vids on YouTube that are helpful.
Once you are on GB.....just pick out any ICS ROM an flash it. Once it installs, I wouldn't even bother sitting it up and then you can go to JB.
Th3Bill uses an Aroma installer in his ROMs and the first time you use it, you will have to flash his aroma-prep first.
Hang in there....go slowly...and read. This gets easier and easier the more you do it. I always just d/l the zips to my phone and never even have to mess with the PC.
http://forum.xda-developers.com/showthread.php?t=1613523
Edit: All of his ROMs for the Infuse can be found and d/l at Jokersax.com
Edit: I just reread your post......once you are on GB, you won't use Odin again. You will use whatever ICS zip to flash your ROM using CWM. Same thing with JB.
Click to expand...
Click to collapse
okay, ill take ur advice and use option c. froyo to gb using odin and possibly bootloaders, then from gb to ics, ics to jb using cwm
wish me luck!

Bootloaders prevent Rainbow fault I guess you could call it in ICS. You don't have to flash them but its recommended. If you have any problems, post and you'll get help pretty quick.
Sent from my SGH-I997 using xda app-developers app

Shawn said:
Bootloaders prevent Rainbow fault I guess you could call it in ICS. You don't have to flash them but its recommended. If you have any problems, post and you'll get help pretty quick.
Sent from my SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
so far so good, it seems i need to do the gb bootloader after all...got the rainbow screen....i have my gbbootloader file ready to go....only thing is i want to confirm where i put the file, i've searched and i can only find a procedure for heimdall not odin...do i put the md5 file in PDA or bootloaders?? also it says in heimdall to tick bootloaders, do i do the same in odin??? it also says to flash twice....?? ok im really not risking a hard brick, i'll be patient and wait
http://forum.xda-developers.com/showthread.php?t=1878458
i'll wait for your answer before i proceed....after this i'll continue to flash ics and then jb...
btw, am i supposed to flash ics twice?? that's what the [GUIDE] How To Flash JB says,
"9. Flash ICS Rom, then ICS Gapps"
but when i tried to flash ics a second time i couldn't (because of rainbow screen, and because it didn't show up in my directory....and where does ICS Gapps show up?
thanks again

If you downloaded the bootloaders linked in the guide, then yes, they go on the pda slot. You only have to flash once.
Heimdall-one click is the one you must flash once before it allows you to flash the bootloaders too.
Edit: to fully install ics you must flash twice, because I believe that what it does when coming from GB is that it just flashes the ics kernel on the first flash, requiring you to run it a second time after rebooting for it to install the complete rom.
Ics gapps are often linked in the rom OPs, although you don't need to flash them if you are headed to JB.
Sent from my sweet & buttery Infuse

andros11 said:
If you downloaded the bootloaders linked in the guide, then yes, they go on the pda slot. You only have to flash once.
Heimdall-one click is the one you must flash once before it allows you to flash the bootloaders too.
Sent from my sweet & buttery Infuse
Click to expand...
Click to collapse
That's odd, I flashed GB bootloaders in Odin from a rooted stock GB. But andros is right about going in the PDA slot. Maybe its just me that didn't have to flash with heimdall first.
Sent from my JellyBeaned Infuse, unofficial cm10

Shawn what I meant is that heimdall one-click wont allow you to flash bootloaders the 1st time, so you must run it once and then a 2nd time but with "flash bootloaders" ticked on.
There's no need to use heimdall before flashing them with Odin.
Sent from my sweet & buttery Infuse

Oh, I see what you mean. My mistake.
Sent from my JellyBeaned Infuse, unofficial cm10

Alright guys, I'm officially a jelly beaner!! Thanks again to all who replied and helped me out, couldn't have done it without your help everything seems to we working fine (with the exception of a few apps that aren't compatible, but they weren't that important ) only issue I have now is that I can't use my data plan and surf the web I configured everything just as I had it before according to my carrier and nothing ...... could it have something to do with the change in modem? When I scan for available network operators I get two options one says :NICMS and the other is just a number 71021... any ideas?
Also, when installing jb in the initial setup it asked which would be the defualt location to save I think I chose the sdcard instead of the emmc directory. ..can I change that setting?

I'm pretty sure you can change the setting, but not sure how. Also, your APNs might be messed up. There's a thread with working APNs. One sec and I'll link it.
Edit: http://forum.xda-developers.com/showthread.php?t=1791526
Sent from my JellyBeaned Infuse, unofficial cm10

Shawn said:
I'm pretty sure you can change the setting, but not sure how. Also, your APNs might be messed up. There's a thread with working APNs. One sec and I'll link it.
Edit: http://forum.xda-developers.com/showthread.php?t=1791526
Sent from my JellyBeaned Infuse, unofficial cm10
Click to expand...
Click to collapse
Thanks for the link Shawn, I looked it over, not sure it could apply since I don't live in the states.. but I'll use it as a start.

marielacvn said:
Thanks for the link Shawn, I looked it over, not sure it could apply since I don't live in the states.. but I'll use it as a start.
Click to expand...
Click to collapse
It probably won't but you never know.

how is [ROM][JellyBean][4.1.1]Unofficial CM10 - Updated CM10 9/14 Butter - MTD - OC Kernel working out? since ive gotten cna nightly my camera and video are extremly buggy, more than id like...what works and doesnt work in unofficial cm10

[Q] this phone does not run any rom stock or custom.....stuck

guys this is 4th day :angel:and i m trying to fix sgs4g t959v.......i downloaded a lot of roms but no one will go beyond boot screen except froyo kd1.....but in froyo after successfull boot it freezes very quickly and reboots...........i m very annoyed now and want someone to share his expertise......thank you in advance:good:
yes it always go into download mode easily and sometimes into recovery but freezes very soon...............

Hi
1. Please update your thread topic, no one will help an empty topicless [Q].
2. Go here and follow instructions. This will bring you to Gingerbread (with GB bootloaders) and from there it will be very easy to upgrade.
3. Once you have a rooted GB ROM with CWM recovery 3 and above, you will be able to flash an MTD ICS ROM such as CM9/MIUI/Ultragen and then JB...

already tried that
itzik2sh said:
Hi
1. Please update your thread topic, no one will help an empty topicless [Q].
2. Go here and follow instructions. This will bring you to Gingerbread (with GB bootloaders) and from there it will be very easy to upgrade.
3. Once you have a rooted GB ROM with CWM recovery 3 and above, you will be able to flash an MTD ICS ROM such as CM9/MIUI/Ultragen and then JB...
Click to expand...
Click to collapse
bro i already tried that......upgraded with kies mini and kies said upgrade is successful but it did not go beyond boot screen

If you used kies mini you did not try that at all.
uninstall all Samsung drivers and actually try that.

itzik2sh said:
If you used kies mini you did not try that at all.
uninstall all Samsung drivers and actually try that.
Click to expand...
Click to collapse
the link you provided said first upgrade from stock froyo to stoc gb, then onwards....i did so......everything went fine but didnt boot

I think if you have the kies drivers installed you should try using gremlin remover.

dervash said:
the link you provided said first upgrade from stock froyo to stoc gb, then onwards....i did so......everything went fine but didnt boot
Click to expand...
Click to collapse
No. You need to read better. The link I sent allows you to upgrade to GB without kies and then further on. Now what you can do is uninstall kies and any other Samsung driver from PC, switch USB port and use heimdall to flash to rooted GB. From there zip flash ICS and then JB...
If you say you don't have boot you probably don't have bootloaders. Please follow instructions and read them well.
sent from me

Did you do the factory reset between?
Sent from my SAMSUNG-SGH-I547 using xda app-developers app

champ1919 said:
Did you do the factory reset between?
Sent from my SAMSUNG-SGH-I547 using xda app-developers app
Click to expand...
Click to collapse
nothing comes beyond boot screen.......how can i do a factory reset.....the one stock rom kd1 i m able to boot but it freezez after seconds.......let me try

i managed to do a factory reset but to no avail

You might be getting confused. Please go back to the link provided by itzik2sh and study the guide on using Heimdall. It's fairly lengthy but completely accurate. It will show you how to use Heimdall to get to stock GB, how to use Heimdall to root your phone by flashing AntonX's kernel, how to flash the necessary bootloaders, and even how to get your device into download mode. It's pretty much foolproof...and it works...please do your homework...we will be grading you.

DickyG said:
You might be getting confused. Please go back to the link provided by itzik2sh and study the guide on using Heimdall. It's fairly lengthy but completely accurate. It will show you how to use Heimdall to get to stock GB, how to use Heimdall to root your phone by flashing AntonX's kernel, how to flash the necessary bootloaders, and even how to get your device into download mode. It's pretty much foolproof...and it works...please do your homework...we will be grading you.
Click to expand...
Click to collapse
bro i did all heimdall one clicks...stock kj6, stock+root, stock kf1..,,but nothing happened........the only thing worked is i downloaded this starter pack http://forum.xda-developers.com/showthread.php?t=1223765 and installed both but nothing happened...then again i flashed first which is kc1 with pit file then i flashed stock froyo rom downloaded from sammobile.....it boots up but suddenly freezes after 20 or so seconds......i erased to factory but the result was same.......then i flashed bali 3.03 kernel and booted to cwm recovery and tried to flash icbinb.....as required i flashed ext4 converter then immediately as i try to flash icbinb....recovery freezes randomly.....and i m unable to complete process.......may be it has some hardware issue

One final thought...looks like you've tried kies, Odin, & Heimdall. There is the possibility that you might have some conflicting drivers wandering around your computer. Why don't you try another computer (if one's available). Run Heimdall...be sure to follow the instructions on verifying your Java version and Microsoft Visual C. If you are successful, be sure and flash the bootloaders and then the basic-with-a-twist kernel.
Hope this works...I'm out of ideas.

i did so.....but no difference......i think it has some hardware problem.....because even if i m in recovery....it freezes after some tine....be it stock recovery or cwm......also i mentioned earlier that only rom which i was able to boot was stock froyo.....but it also freezes after a couple of minutes. and if i dont turn off during it is frozen it becomes very hot and gives over heat signal at next restart..................so assuming it had a hardware problem i returned back the device

[Q] Kitkat compatible CWM for Infuse?

Hi everyone, I have been searching this forum to find a CWM that is compatible with KitKat and the infuse 4g. I tried the ROM manager app, but this device is not compatible. Plus I'm trying to meet the post requirement before I can ask this question in dev forum...not a great rule. cuz that way i have to post 10 posts that i don't want to post before I post the one I want.

beofonemind said:
Hi everyone, I have been searching this forum to find a CWM that is compatible with KitKat and the infuse 4g. I tried the ROM manager app, but this device is not compatible. Plus I'm trying to meet the post requirement before I can ask this question in dev forum...not a great rule. cuz that way i have to post 10 posts that i don't want to post before I post the one I want.
Click to expand...
Click to collapse
you just have to flash the roms from the base rooted GB with CWM/RED recovery then update GB ---> ICS----->JB----->KK and the CWM version updates itself and each KK rom has its own CWM version

Thanks.
Thank you.

Young_Azul said:
you just have to flash the roms from the base rooted GB with CWM/RED recovery then update GB ---> ICS----->JB----->KK and the CWM version updates itself and each KK rom has its own CWM version
Click to expand...
Click to collapse
Do you need to flash in that order.. GB > ICS > JB > KK ? because I just flashed GB with CWM then to whatever next rom happen to be without issue. Each version got it's own kernel/cwm so why need to go thru all that. Just curious.

scmfxt said:
Do you need to flash in that order.. GB > ICS > JB > KK ? because I just flashed GB with CWM then to whatever next rom happen to be without issue. Each version got it's own kernel/cwm so why need to go thru all that. Just curious.
Click to expand...
Click to collapse
its recommended....i have tried to jump from gb to kk before but then it wouldn't boot the rom so i put into download mode and went back to stock gb the went to ics then jb then every kk rom out there

Hmm.. weird because I have no issue jumping from GB to the current KK or any other rom.. you just need to turn lagfix off b4 u install other rom.

scmfxt said:
Hmm.. weird because I have no issue jumping from GB to the current KK or any other rom.. you just need to turn lagfix off b4 u install other rom.
Click to expand...
Click to collapse
is yours the rogers or AT&T one?

AT&T

scmfxt said:
AT&T
Click to expand...
Click to collapse
so is mine thats strange that yours has no problem doing it while mine does

Young_Azul said:
so is mine thats strange that yours has no problem doing it while mine does
Click to expand...
Click to collapse
ok.. I just re-flash to stock a few minutes ago and flash kernel for cwm.. now will install the new 4.4.3 and Gapps. And not going go thru ICS or JB.

scmfxt said:
ok.. I just re-flash to stock a few minutes ago and flash kernel for cwm.. now will install the new 4.4.3 and Gapps. And not going go thru ICS or JB.
Click to expand...
Click to collapse
So I'm guessing your going with CarbonRom's 6/15 nightly?
Sent from my SGH-I997 using XDA Premium 4 mobile app

yep.. let see what 4.4.3 has to offer. Got a couple of days to play around.

For some devices flashing straight from stock just works. If you have red CWM it is a bad candidate and should use ICS as an intermediary. But you can be on GB and not have red CWM (rather blue or green I forget which), as was the case when I first flashed up. This may be your case as well.
Its not the version of the OS that matters, rather the spread of CWM versions. At least that is my understanding of the situation.
Sent from my MyTouch 4G Slide using XDA Free mobile app

I think it's a matter of steps you take from GB to the next rom. For me:
1. GB stock with root.
2. Install sgs kernel flash and flash kernel with CWM (Synthesis).
3. Go into CWM and disable lagfix if it's enabled.
4. Update your flavor rom in recovery mode. NOTE: You will need to flash twice since 1st time give you a warning about partitions.
5. Once flashed it will auto reboot.... HERE you need to remove the battery to power off.. put battery back in and go into recovery mode and flash the rom again since the previous flash only install the new recovery.
6. Install Gapp.
7. CWM: wipe Cache Partition
8. CWM: Advanced > wipe Dalvik Cache
9. Reboot.

scmfxt said:
I think it's a matter of steps you take from GB to the next rom. For me:
1. GB stock with root.
2. Install sgs kernel flash and flash kernel with CWM (Synthesis).
3. Go into CWM and disable lagfix if it's enabled.
4. Update your flavor rom in recovery mode. NOTE: You will need to flash twice since 1st time give you a warning about partitions.
5. Once flashed it will auto reboot.... HERE you need to remove the battery to power off.. put battery back in and go into recovery mode and flash the rom again since the previous flash only install the new recovery.
6. Install Gapp.
7. CWM: wipe Cache Partition
8. CWM: Advanced > wipe Dalvik Cache
9. Reboot.
Click to expand...
Click to collapse
Because I have the Rogers variety, my step 2 uses a different product (the name escapes me but I use ODIN to flash it) and I was able to skip over step 3 (not sure if it was even an option). Overall I had red CWM, but the first time CWM was green (or blue). I think the difference in versions had to do that I installed ROM Manager the first time around and tried to install the i9000 (or something) CWM image. It wasn't successful, but it looks like it made some impact.
Out of curiousity, what colour was your CWM in Gingerbread? Synthesis may be using a newer (more forgiving) version.

red cwm 2.5.1.3 after the kernel flashed.