Database Info

Does ICS have a kernal?

So i was just wondering but how does CM9 have a kernal if we dont have an ICS kernal?

bradman117 said:
So i was just wondering but how does CM9 have a kernal if we dont have an ICS kernal?
Click to expand...
Click to collapse
It is in the boot.img. So far all Infuse cm9 is based of jt or entropy branching off jt. If you want just the kernel, after you f flash the ROM, you can dump the kernel from bml 7 using dd commamd.
Jt recover ics is such a kernel. Check my thread for the heimdall packed.
Jscott also extracted entropies kernel and i packed into a heimdall 1 click also. I haven't had a chance to test it yet. Pm me if you want a shot at it.
I think having these kernel in a heimdall makes flashing and recovery from cm9 simple.
Dl mode. Flash. factory reset. And it's ready for cm9 ROM.

qkster said:
It is in the boot.img. So far all Infuse cm9 is based of jt or entropy branching off jt. If you want just the kernel, after you f flash the ROM, you can dump the kernel from bml 7 using dd commamd.
Jt recover ics is such a kernel. Check my thread for the heimdall packed.
Jscott also extracted entropies kernel and i packed into a heimdall 1 click also. I haven't had a chance to test it yet. Pm me if you want a shot at it.
I think having these kernel in a heimdall makes flashing and recovery from cm9 simple.
Dl mode. Flash. factory reset. And it's ready for cm9 ROM.
Click to expand...
Click to collapse
I've used your heimdal package of the ics kernel multiple times as I constantly brick my phone trying to port and have to go back to stock...I then flash the ics kernel and I'm back up and running ready for ics...I just wish I could only flash the kernel...always gotta go back to stock first...but with your heimdal I'm back up and running in no time
Sent from my SGH-I997 using XDA

As for the kernel...as far as I know it isn't a full on ics kernel...it is a gingerbread kernel that has been heavily modified to run ics however it will not work with gingerbread any longer...
So its an ics kernel created from a gingerbread kernel...insane development going on there...got tons of respect for jt and entropy getting that done...
Sent from my SGH-I997 using XDA

mg2195 said:
I've used your heimdal package of the ics kernel multiple times as I constantly brick my phone trying to port and have to go back to stock...I then flash the ics kernel and I'm back up and running ready for ics...I just wish I could only flash the kernel...always gotta go back to stock first...but with your heimdal I'm back up and running in no time
Sent from my SGH-I997 using XDA
Click to expand...
Click to collapse
I don't think you need to go back to stock with system files that you will overwrite anyway.
Flash just the kernel. Wipe.
And flash the ics.
Maybe use entropy kernel flash then a jt kernel if you can't recover with only jt.

qkster said:
I don't think you need to go back to stock with system files that you will overwrite anyway.
Flash just the kernel. Wipe.
And flash the ics.
Maybe use entropy kernel flash then a jt kernel if you can't recover with only jt.
Click to expand...
Click to collapse
What do you mean by an entropy kernel flash then a jt? I've tried just flashing the jt one you have and no matter what rom I flash...when I hit that reboot button it will always boot back to recovery...
Anyways im back up and running in under 10 minutes...so its nothing to complain about...
Sent from my SGH-I997 using XDA

mg2195 said:
What do you mean by an entropy kernel flash then a jt? I've tried just flashing the jt one you have and no matter what rom I flash...when I hit that reboot button it will always boot back to recovery...
Anyways im back up and running in under 10 minutes...so its nothing to complain about...
Sent from my SGH-I997 using XDA
Click to expand...
Click to collapse
I'm not sure if we're talking about the same thing but:
Let say you tried a port or build and got into a boot loop. Or lost recovery, you don't necessarily have to flash the whole stock package.
In my kernel root thread, post #3. Flash the Jt kernel in download mode. That should bring you n back to recovery from boot loop or lost recovery with the three finger combo.
I've noted that since Jt kernel has the cwm 5.xxx sometimes it doesn't do the trick. If that was the case, I would flash the entropy in download mode..post #2..in the uclb3 thread.
That will also give you cwm recovery without having to flash the whole stock base.
Boot into recovery, wipe and/or mount and you are set to flash the next experimental build. Just be sure to have a couple of different builds to test on your sdcard.
Once you flash what ever build or ROM, it had it's own kernel and system file to write over your current. In this case, it would not matter, as you are not working with a system file...only the recovery.
Edit: it would also make sense of you created a mg_lite ROM for debug if you needed to have the phone system. Make a ROM with minimal stuff. Turn off boot ani. Have only minimal apps..no email or gmail or bt fb or any crap that would allow down the boot and dalvik process. Only a few system files and libs are needed. That way you can save some time instead of going back to the whole stock process

qkster said:
I'm not sure if we're talking about the same thing but:
Let say you tried a port or build and got into a boot loop. Or lost recovery, you don't necessarily have to flash the whole stock package.
In my kernel root thread, post #3. Flash the Jt kernel in download mode. That should bring you n back to recovery from boot loop or lost recovery with the three finger combo.
I've noted that since Jt kernel has the cwm 5.xxx sometimes it doesn't do the trick. If that was the case, I would flash the entropy in download mode..post #2..in the uclb3 thread.
That will also give you cwm recovery without having to flash the whole stock base.
Boot into recovery, wipe and/or mount and you are set to flash the next experimental build. Just be sure to have a couple of different builds to test on your sdcard.
Once you flash what ever build or ROM, it had it's own kernel and system file to write over your current. In this case, it would not matter, as you are not working with a system file...only the recovery.
Edit: it would also make sense of you created a mg_lite ROM for debug if you needed to have the phone system. Make a ROM with minimal stuff. Turn off boot ani. Have only minimal apps..no email or gmail or bt fb or any crap that would allow down the boot and dalvik process. Only a few system files and libs are needed. That way you can save some time instead of going back to the whole stock process
Click to expand...
Click to collapse
Taking a vacation for memorial weekend...but I'll give what you suggested a try Monday night...if I happen to soft brick...
Sent from my SGH-I997 using XDA

Galaxy s 4g not reading my sim card??

I got the phone off craigslist yesterday and it has the rom http://forum.xda-developers.com/showthread.php?t=1733097 and now i have to flash back to stock but i like the rom. How do i flash back using without using http://forum.xda-developers.com/showpost.php?p=21953878&postcount=2 Can i use odin still? Can someone tell me a easy way to flash back to stock please.

Look for Gremlin Remover in dev section.

Thank You so much it worked . The only thing i don't know how to put that Rom back onto it.

shaqqq said:
Thank You so much it worked . The only thing i don't know how to put that Rom back onto it.
Click to expand...
Click to collapse
Which ROM are you talking about? I'm sure if you read the OP of the one you want, it will have clear directions you can follow. If you don't understand something in the directions, however, please come back and ask!

This Rom http://forum.xda-developers.com/showthread.php?t=1733097 & now im on 2.3.4 Gingerbread when i used Gremlin Remover. Im not sure how to get to the rom now

Ah, Ok. If you're rooted, get SGS Kernel Flasher from the play store, it's free. Then, use it to flash AntonX's 1.1.3 kernel, from the dev section. After you do that, flash to CM7, THEN flash AOKP.
Or, you can wait till FB releases the next update, which is supposed to fix the BML>MTD conversion. But, I don't know when that will be.
Edit: Make sure you read the instructions for both the ROMs carefully, before you flash them! It can save your device a lot of trouble!

Wodensman said:
Ah, Ok. If you're rooted, get SGS Kernel Flasher from the play store, it's free. Then, use it to flash AntonX's 1.1.3 kernel, from the dev section. After you do that, flash to CM7, THEN flash AOKP.
Or, you can wait till FB releases the next update, which is supposed to fix the BML>MTD conversion. But, I don't know when that will be.
Edit: Make sure you read the instructions for both the ROMs carefully, before you flash them! It can save your device a lot of trouble!
Click to expand...
Click to collapse
Ok i'm going to try to get it now thank you

Wodensman said:
Which ROM are you talking about? I'm sure if you read the OP of the one you want, it will have clear directions you can follow. If you don't understand something in the directions, however, please come back and ask!
Click to expand...
Click to collapse
I couldn't find the links to download what you said to download . Can you please tell me links thank you.

Wodensman said:
Ah, Ok. If you're rooted, get SGS Kernel Flasher from the play store, it's free. Then, use it to flash AntonX's 1.1.3 kernel, from the dev section. After you do that, flash to CM7, THEN flash AOKP.
Or, you can wait till FB releases the next update, which is supposed to fix the BML>MTD conversion. But, I don't know when that will be.
Edit: Make sure you read the instructions for both the ROMs carefully, before you flash them! It can save your device a lot of trouble!
Click to expand...
Click to collapse
I couldn't find the links to download what you said to download . Can you please tell me links thank you.

AntonX's kernel:
http://forum.xda-developers.com/showthread.php?p=25115050
AOKP:
http://forum.xda-developers.com/showthread.php?p=27900972
You don't need to worry about flashing CM7.

lumin30 said:
AntonX's kernel:
http://forum.xda-developers.com/showthread.php?p=25115050
AOKP:
http://forum.xda-developers.com/showthread.php?p=27900972
You don't need to worry about flashing CM7.
Click to expand...
Click to collapse
I can still do this even though im on firmware 2.3.4 right? & to flash AntonX's kenrnel i use SGS kernal flasher right? then after that i go into recovery and flash AOKP?

I did the kernel after i went to recovery and tried to install AOKP and it said installation aborted..

Make sure you follow the directions to flash in the AOKP thread. I read flashing from BML works. Try again follow the directions in the thread.

lumin30 said:
Make sure you follow the directions to flash in the AOKP thread. I read flashing from BML works. Try again follow the directions in the thread.
Click to expand...
Click to collapse
What's BML? Link Please ? The tread says flash using CMW but it didn't work..

Does it have to do with it being on 2.3.4 & build number says GINGERBREAD.VUVKG4?

Make sure your recovery says CMW 5.xx.xx (x's being numbers) I think the recovery in gremlin remover is the old CWM 3.xx.xx.
Also If you installed antonx's kernel reboot the phone and try again. I have flashed from stock with root to aokp several times the past few days.

eollie said:
Make sure your recovery says CMW 5.xx.xx (x's being numbers) I think the recovery in gremlin remover is the old CWM 3.xx.xx.
Also If you installed antonx's kernel reboot the phone and try again. I have flashed from stock with root to aokp several times the past few days.
Click to expand...
Click to collapse
My CMW is Blue if that matters and it says CWM-based Recovery v5.0.2.8 . If its not the updated CWM how do i update it?

Make sure you have the most recent version of aokp I believe it is .v3 now. That is the only version that can be flashed straight from stock based roms.

eollie said:
Make sure you have the most recent version of aokp I believe it is .v3 now. That is the only version that can be flashed straight from stock based roms.
Click to expand...
Click to collapse
This the one i downloaded aokp_galaxys4gmtd_unofficial_milestone-6-03.zip

I found out i am on the updated version so why isn't it working?

What to do next for an ICS ROM ?

I tried many methods mentioned in Road map to install ICS rom. But no success.
Currently : I am at GB 2.3.6 UCLB3 with root and CWM V2.5.1.3
other specs :
Firmware : 2.3.6
Baseband : I997UCLB3
Kernel : 2.6.35.7-I997RUXKG3-CL366622
Buid : Gingerbread.UCLB3
While on Download Mode I get these messages :
custom binary Download : Yes (1 count)
Current Binary : CUSTOM
Please help with next steps to install ICS ROM like AOKP or MIUI. ??
Also suggest for which ICS to go ?

Can u plz provide more details as how u tried to install the ICS and what error u faced ?

rkkaranrk said:
Can u plz provide more details as how u tried to install the ICS and what error u faced ?
Click to expand...
Click to collapse
After this I downloaded AOKP ROM and through CWM I flashed. No error Message but got stuck up at SAMSUNG load screen. Tried second time also. No chance.

harismahesh said:
After this I downloaded AOKP ROM and through CWM I flashed. No error Message but got stuck up at SAMSUNG load screen. Tried second time also. No chance.
Click to expand...
Click to collapse
Hanging on the Samsung screen is normal when coming to AOKP from Gingerbread, you need to double flash here's how:
Flash the ROM like normal in CWM, when it reboots and you hang at the Samsung screen use the 3 finger method to get into Recovery (hold power & both Volume buttons). Once there go the Mounts and Storage option and format system, data, and cache...then reflash the ROM again (you may also have to flash the latest gapps if your not using an Aroma installer) reboot and you should be gtg.

it doesn't hang for me

harismahesh said:
After this I downloaded AOKP ROM and through CWM I flashed. No error Message but got stuck up at SAMSUNG load screen. Tried second time also. No chance.
Click to expand...
Click to collapse
brother did you read the op....but just like Smokestack360 posted....try to read his directions....attention to detail...and you will be GTG!
I don't mean to be an [email protected]@ and I apologize if I do...but this is your investment, your phone....I personally read and re-read...and sometimes get my wife to read it...btw she hates that...LOL,
How to Install - Coming from NON ICS Rom
Download Rom and latest Google Apps and enter recovery
Wipe/Factory Reset
Flash rom zip file
Reboot...will hang on kernel splash screen
Use three-button method to enter recovery mode
Go to mounts and storage and format system, data, and cache
Reflash rom
Flash Gapps
Reboot

Please Guide me to Install MIUI ROM .
Currently I am on :
Currently : I am at GB 2.3.6 UCLB3 with root and stock 3E
other specs :
Firmware : 2.3.6
Baseband : I997UCLB3
Kernel : 2.6.35.7-I997RUXKG3-CL366622
Buid : Gingerbread.UCLB3
I tried with Entropy DD Kernel and it soft bricked my phone. So I reverted back. Then only I saw it wont work for MIUI. Right now i am on stock 3E ( not modified) with root.
Please guide me to put MIUI ROM. I didnt find any help in MIUI ROM thread.

harismahesh said:
I tried with Entropy DD Kernel and it soft bricked my phone. So I reverted back. Then only I saw it wont work for MIUI. Right now i am on stock 3E ( not modified) with root.
Please guide me to put MIUI ROM. I didnt find any help in MIUI ROM thread.
Click to expand...
Click to collapse
Use Odin or Heimdall to get cwm recovery then follow the steps in the above posts. I think u might even b able to get cwm recovery via the ROM manager app but think that it isn't the recommended method.
When coming from GB, u have to flash twice. That's why u were stuck at the Samsung logo before.
All ics ROMs are flashed the same way so read through the first posts of dev threads. Although the instructions will b the same as provided above.
Edit: And don't try to use a different kernel right off the bat. The one provided with the ROM is usually provided bc it works best.
Sent from my SGH-I997 using xda app-developers app

benbos_06 said:
Use Odin or Heimdall to get cwm recovery then follow the steps in the above posts. I think u might even b able to get cwm recovery via the ROM manager app but think that it isn't the recommended method.
When coming from GB, u have to flash twice. That's why u were stuck at the Samsung logo before.
All ics ROMs are flashed the same way so read through the first posts of dev threads. Although the instructions will b the same as provided above.
Edit: And don't try to use a different kernel right off the bat. The one provided with the ROM is usually provided bc it works best.
Sent from my SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
For Recovery I can use Entropy Daily Driver, But that wont work for MIUI. SO where I can a Kernel which contains CWM for MIUI.

harismahesh said:
For Recovery I can use Entropy Daily Driver, But that wont work for MIUI. SO where I can a Kernel which contains CWM for MIUI.
Click to expand...
Click to collapse
If u look in the "ISET Infuse everything" thread that's stickied in the dev section, there is Odin or Heimdall one click which both will give u cwm recovery.
I'm not familiar with entrophy's daily driver but I thought it was just a GB kernel, which is why it wouldn't work with that miui version bc it is ics.
Edit: I know most (and I believe all) ROMs will have a kernel packaged with them so u can just flash the ROM to get a working kernel. But bc it coming from GB, u need to follow the instructions provided above and flash twice. The reason I am saying use Odin is bc u said u have 3e recovery and I believe that u need to get cwm recovery first. I may b wrong about that tho.
Sent from my SGH-I997 using xda app-developers app

benbos_06 said:
Use Odin or Heimdall to get cwm recovery then follow the steps in the above posts. I think u might even b able to get cwm recovery via the ROM manager app but think that it isn't the recommended method.
When coming from GB, u have to flash twice. That's why u were stuck at the Samsung logo before.
All ics ROMs are flashed the same way so read through the first posts of dev threads. Although the instructions will b the same as provided above.
Edit: And don't try to use a different kernel right off the bat. The one provided with the ROM is usually provided bc it works best.
Sent from my SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
You've got that wrong
I flashed cm9 on red cwm and it worked without the freeze screem
This kindle is on pure jelly bean

harismahesh said:
Please Guide me to Install MIUI ROM .
Currently I am on :
Currently : I am at GB 2.3.6 UCLB3 with root and stock 3E
other specs :
Firmware : 2.3.6
Baseband : I997UCLB3
Kernel : 2.6.35.7-I997RUXKG3-CL366622
Buid : Gingerbread.UCLB3
I tried with Entropy DD Kernel and it soft bricked my phone. So I reverted back. Then only I saw it wont work for MIUI. Right now i am on stock 3E ( not modified) with root.
Please guide me to put MIUI ROM. I didnt find any help in MIUI ROM thread.
Click to expand...
Click to collapse
Read post #4 and #6. That tells you how to flash a cm9 rom. I suggest, based only on my experience, flashing Entropy512's cm 9 build. Again, follow the instructions in post 4 and / or 6. I would not flash the current version of miui 4 as a new build will soon be posted. The instructions for flashing miui are in the OP.

GoSooners345 said:
You've got that wrong
I flashed cm9 on red cwm and it worked without the freeze screem
This kindle is on pure jelly bean
Click to expand...
Click to collapse
Sorry, to b politically correct, I should have said the majority of ppl have to flash twice.
Sent from my SGH-I997 using xda app-developers app

Yeah u have to flash it twice to get it work or else u will stuck in blue recovery.
Sent from my GT-I9300 using Tapatalk 2

Unlocked, now can't install kexec roms?

I unlocked the bootloader. Roms like Synergy, Bean, etc no longer boot (stuck on samusg scrreeen)
Any idea?\

confusedman112 said:
I unlocked the bootloader. Roms like Synergy, Bean, etc no longer boot (stuck on samusg scrreeen)
Any idea?\
Click to expand...
Click to collapse
What methode did you use to unlock it? I'm running the stock no nonsense rom and I belive unlocked with no problems

Do other roms boot? Will the newest CM10 nightly boot? Will anything boot?
Did you flash a different recovery? If you were using kexec roms before (beans is one, so is synergy with imo's kernel) and then flashed a non-kexec-supporting recovery, that'd explain not being able to boot. If you're unlocked, you don't have to flash a new recovery.
If you did the unlock correctly, you should be able to boot whatever you were able to before. If you can't get anything at all to boot, it's possible you flashed a bad aboot image.

lazarus2405 said:
Do other roms boot? Will the newest CM10 nightly boot? Will anything boot?
Did you flash a different recovery? If you were using kexec roms before (beans is one, so is synergy with imo's kernel) and then flashed a non-kexec-supporting recovery, that'd explain not being able to boot. If you're unlocked, you don't have to flash a new recovery.
If you did the unlock correctly, you should be able to boot whatever you were able to before. If you can't get anything at all to boot, it's possible you flashed a bad aboot image.
Click to expand...
Click to collapse
CM10 ROMs boot.
I think it's because I used CWM 5.x rather than 6.x. Phone isn't recongized by PC, no idea why. Any idae how to get 6.x using the terminal app in CM10 and wifi?

confusedman112 said:
CM10 ROMs boot.
I think it's because I used CWM 5.x rather than 6.x. Phone isn't recongized by PC, no idea why. Any idae how to get 6.x using the terminal app in CM10 and wifi?
Click to expand...
Click to collapse
Install EZ-Recovery from the play store and flash 6.0.1.0?

PJnc284 said:
Install EZ-Recovery from the play store and flash 6.0.1.0?
Click to expand...
Click to collapse
Thanks. Flashing Synergy now to test it...let's see what happens.
EDIT: Flashed just great, but still isn't working. But, it's cool, CM10 mods work and I got what I needed (exported Verizon contacts and improted them to Google Contacts using My Verizon's webstie)

confusedman112 said:
CM10 ROMs boot.
I think it's because I used CWM 5.x rather than 6.x.
Click to expand...
Click to collapse
Yep, that's exactly the problem. You installed a non-kexec recovery and your roms still use kexec.
You're sure you selected the right options in EZ recovery? Open it, scroll to the recovery pane, select the "recovery" radio button, change the drop down menu next to it to CWM 6.0.1.0, click the "Flash!" button. That should let you install whatever roms or kernels you like.

lazarus2405 said:
Yep, that's exactly the problem. You installed a non-kexec recovery and your roms still use kexec.
You're sure you selected the right options in EZ recovery? Open it, scroll to the recovery pane, select the "recovery" radio button, change the drop down menu next to it to CWM 6.0.1.0, click the "Flash!" button. That should let you install whatever roms or kernels you like.
Click to expand...
Click to collapse
Dang. How do I undo the bootloader unlock so I can redo it with the proper CWM?

confusedman112 said:
Dang. How do I undo the bootloader unlock so I can redo it with the proper CWM?
Click to expand...
Click to collapse
Being unlocked shouldn't have any impact on being able to flash using ez-recovery. One thing you can try is use EZ-Recovery to flash stock recovery, odin back to the stock verizon image which should relock the bootloader and start all over.

confusedman112 said:
Dang. How do I undo the bootloader unlock so I can redo it with the proper CWM?
Click to expand...
Click to collapse
why dont you take some time and read before flashing...this s*** is getting rediculous! Your questions are answered in multiple threads on this forum. Actually I just answered your question in a thread right below this!! Sorry not trying to be a ****...sigh.

droidstyle said:
why dont you take some time and read before flashing...this s*** is getting rediculous! Your questions are answered in multiple threads on this forum. Actually I just answered your question in a thread right below this!! Sorry not trying to be a ****...sigh.
Click to expand...
Click to collapse
Because I am at work and don't have time to find and locate? Could you reference it, please?

PJnc284 said:
Being unlocked shouldn't have any impact on being able to flash using ez-recovery. One thing you can try is use EZ-Recovery to flash stock recovery, odin back to the stock verizon image which should relock the bootloader and start all over.
Click to expand...
Click to collapse
Why do you need to flash stock recovery to use Odin to flash stock Verizon rom? Odin has nothing to do with what recovery you have installed. I flashed stock unrooted rom while rooted and having CWM recovery, it worked just fine. Once you flash stock rom, it restores the stock recovery too anyway. I'm fairly sure of this, but if I'm wrong, please correct me anybody.

newuser134 said:
Why do you need to flash stock recovery to use Odin to flash stock Verizon rom? Odin has nothing to do with what recovery you have installed. I flashed stock unrooted rom while rooted and having CWM recovery, it worked just fine. Once you flash stock rom, it restores the stock recovery too anyway. I'm fairly sure of this, but if I'm wrong, please correct me anybody.
Click to expand...
Click to collapse
Just to be safe. Wanted to get rid of the sprint related elements from the original root so I Odin'd back to stock with cwm installed using the VRALF2 tar found here. Tried to boot into recovery to factory reset prior to first boot and had 0 recovery (not stock nor cwm). Luckily the rom booted and I used the simple root method to root and install EZ-Recovery to install CWM.

If I flashed synergy v1.7 and used rom manager v5.x.x and then unlocked the boot loader how would I flash a new rom? Do I have to use ez recovery with clockwork mod v6.x.x since it is now unlocked or can I continue using rom manager with clockwork mod 5.x.x. I'm a noob and won't be looking to switch roms until synergy gets jellybean. Thanks for the help and hopefully I made sense with my question

synergy to beans to synergy bootloop
I think my issue might be related to the issues stated above.
So after after having unlocked my bootloader with EZ unlock & installing beans custom Rom via TWRP , I decided to go back to synergy. I made a nandroid of my synergy which was origianlly installed with CWM and figured I could just wipe and restore that with TWRP. Total bootloop.
OK, so I pulled the battery, tried it again...bootloop.
SO I pulled the battery, wiped and installed the synergy zip thinking I could try a fresh install. I got a message in TWRP that E:sd-ext was not found, but wipe seemed to happen so I continued the process.
installation said it was successful but now when I try to boot up, I either get stuck in the android is upgrading applications (looping over and over) or it gets through there and tells me all teh com.android.xxxx applications unexpectedly stop.
is this a soft brick? can I recover from this? are there incompatibilities between the kernels of bean's custom rom and synergy for verizon samsung galaxy s3?

[Q] Kitkat compatible CWM for Infuse?

Hi everyone, I have been searching this forum to find a CWM that is compatible with KitKat and the infuse 4g. I tried the ROM manager app, but this device is not compatible. Plus I'm trying to meet the post requirement before I can ask this question in dev forum...not a great rule. cuz that way i have to post 10 posts that i don't want to post before I post the one I want.

beofonemind said:
Hi everyone, I have been searching this forum to find a CWM that is compatible with KitKat and the infuse 4g. I tried the ROM manager app, but this device is not compatible. Plus I'm trying to meet the post requirement before I can ask this question in dev forum...not a great rule. cuz that way i have to post 10 posts that i don't want to post before I post the one I want.
Click to expand...
Click to collapse
you just have to flash the roms from the base rooted GB with CWM/RED recovery then update GB ---> ICS----->JB----->KK and the CWM version updates itself and each KK rom has its own CWM version

Thanks.
Thank you.

Young_Azul said:
you just have to flash the roms from the base rooted GB with CWM/RED recovery then update GB ---> ICS----->JB----->KK and the CWM version updates itself and each KK rom has its own CWM version
Click to expand...
Click to collapse
Do you need to flash in that order.. GB > ICS > JB > KK ? because I just flashed GB with CWM then to whatever next rom happen to be without issue. Each version got it's own kernel/cwm so why need to go thru all that. Just curious.

scmfxt said:
Do you need to flash in that order.. GB > ICS > JB > KK ? because I just flashed GB with CWM then to whatever next rom happen to be without issue. Each version got it's own kernel/cwm so why need to go thru all that. Just curious.
Click to expand...
Click to collapse
its recommended....i have tried to jump from gb to kk before but then it wouldn't boot the rom so i put into download mode and went back to stock gb the went to ics then jb then every kk rom out there

Hmm.. weird because I have no issue jumping from GB to the current KK or any other rom.. you just need to turn lagfix off b4 u install other rom.

scmfxt said:
Hmm.. weird because I have no issue jumping from GB to the current KK or any other rom.. you just need to turn lagfix off b4 u install other rom.
Click to expand...
Click to collapse
is yours the rogers or AT&T one?

AT&T

scmfxt said:
AT&T
Click to expand...
Click to collapse
so is mine thats strange that yours has no problem doing it while mine does

Young_Azul said:
so is mine thats strange that yours has no problem doing it while mine does
Click to expand...
Click to collapse
ok.. I just re-flash to stock a few minutes ago and flash kernel for cwm.. now will install the new 4.4.3 and Gapps. And not going go thru ICS or JB.

scmfxt said:
ok.. I just re-flash to stock a few minutes ago and flash kernel for cwm.. now will install the new 4.4.3 and Gapps. And not going go thru ICS or JB.
Click to expand...
Click to collapse
So I'm guessing your going with CarbonRom's 6/15 nightly?
Sent from my SGH-I997 using XDA Premium 4 mobile app

yep.. let see what 4.4.3 has to offer. Got a couple of days to play around.

For some devices flashing straight from stock just works. If you have red CWM it is a bad candidate and should use ICS as an intermediary. But you can be on GB and not have red CWM (rather blue or green I forget which), as was the case when I first flashed up. This may be your case as well.
Its not the version of the OS that matters, rather the spread of CWM versions. At least that is my understanding of the situation.
Sent from my MyTouch 4G Slide using XDA Free mobile app

I think it's a matter of steps you take from GB to the next rom. For me:
1. GB stock with root.
2. Install sgs kernel flash and flash kernel with CWM (Synthesis).
3. Go into CWM and disable lagfix if it's enabled.
4. Update your flavor rom in recovery mode. NOTE: You will need to flash twice since 1st time give you a warning about partitions.
5. Once flashed it will auto reboot.... HERE you need to remove the battery to power off.. put battery back in and go into recovery mode and flash the rom again since the previous flash only install the new recovery.
6. Install Gapp.
7. CWM: wipe Cache Partition
8. CWM: Advanced > wipe Dalvik Cache
9. Reboot.

scmfxt said:
I think it's a matter of steps you take from GB to the next rom. For me:
1. GB stock with root.
2. Install sgs kernel flash and flash kernel with CWM (Synthesis).
3. Go into CWM and disable lagfix if it's enabled.
4. Update your flavor rom in recovery mode. NOTE: You will need to flash twice since 1st time give you a warning about partitions.
5. Once flashed it will auto reboot.... HERE you need to remove the battery to power off.. put battery back in and go into recovery mode and flash the rom again since the previous flash only install the new recovery.
6. Install Gapp.
7. CWM: wipe Cache Partition
8. CWM: Advanced > wipe Dalvik Cache
9. Reboot.
Click to expand...
Click to collapse
Because I have the Rogers variety, my step 2 uses a different product (the name escapes me but I use ODIN to flash it) and I was able to skip over step 3 (not sure if it was even an option). Overall I had red CWM, but the first time CWM was green (or blue). I think the difference in versions had to do that I installed ROM Manager the first time around and tried to install the i9000 (or something) CWM image. It wasn't successful, but it looks like it made some impact.
Out of curiousity, what colour was your CWM in Gingerbread? Synthesis may be using a newer (more forgiving) version.

red cwm 2.5.1.3 after the kernel flashed.