i had rooted my phone using Sp flash tool...
after that when i tried to upgrade rom to 4.4.2 ....
in this process i had downloaded one rom , while installing i got a status 7 error... so i rebooted my phone ...after this failure process, the boot loader only loades and os could not (os crashed )
i connected it pc ,, us sp flash tools , i deleted flash memory and bootloader ( thinking that to get the defaULT os)..:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
unfortunately .... total is been deleted with boot loader ... i could not do any thing with that ,,
now it was unable to on ... when connected to pc .. i will just show some device is connected .. but unable to identify ... it wont display charging status also..
it is like a phone which comes from factory after bulting chips .... no os no boot loader ..
i had given in care also ... but they could not help me ...
i guess u know my problem ...... now i need some software to instal bootloader in to my divice.......
pls pls pls help me:crying::crying:
Saikrishna.dsk said:
i had rooted my phone using Sp flash tool...
after that when i tried to upgrade rom to 4.4.2 ....
in this process i had downloaded one rom , while installing i got a status 7 error... so i rebooted my phone ...after this failure process, the boot loader only loades and os could not (os crashed )
i connected it pc ,, us sp flash tools , i deleted flash memory and bootloader ( thinking that to get the defaULT os)..:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
unfortunately .... total is been deleted with boot loader ... i could not do any thing with that ,,
now it was unable to on ... when connected to pc .. i will just show some device is connected .. but unable to identify ... it wont display charging status also..
it is like a phone which comes from factory after bulting chips .... no os no boot loader ..
i had given in care also ... but they could not help me ...
i guess u know my problem ...... now i need some software to instal bootloader in to my divice.......
pls pls pls help me:crying::crying:
Click to expand...
Click to collapse
How did you root your phone using SP flash? are you sure it was rooted?
And from where did you get the 4.4.2 Rom? There is no such rom
Are you crazy? can you atleast think before doing stuff.. you've probably messed up your phone and you dont even know what you've done
Flash stock V1 rom using SP flash.. and try booting it up
1st boot takes time
U messed up ur phone ...
Saikrishna.dsk said:
i had rooted my phone using Sp flash tool...
after that when i tried to upgrade rom to 4.4.2 ....
in this process i had downloaded one rom , while installing i got a status 7 error... so i rebooted my phone ...after this failure process, the boot loader only loades and os could not (os crashed )
i connected it pc ,, us sp flash tools , i deleted flash memory and bootloader ( thinking that to get the defaULT os)..:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
unfortunately .... total is been deleted with boot loader ... i could not do any thing with that ,,
now it was unable to on ... when connected to pc .. i will just show some device is connected .. but unable to identify ... it wont display charging status also..
it is like a phone which comes from factory after bulting chips .... no os no boot loader ..
i had given in care also ... but they could not help me ...
i guess u know my problem ...... now i need some software to instal bootloader in to my divice.......
pls pls pls help me:crying::crying:
Click to expand...
Click to collapse
Bootloader in Micromax Canvas 2 plus???? :/
This is canvas 2 plus A110q forum not A110
From where u got 4.4 kk rom... Without knowing much y u used sp tool.... Are u able to get into recovery??? Or u didnt flashed it??? Just rooted it...
Zafarchauhan15 said:
Bootloader in Micromax Canvas 2 plus???? :/
This is canvas 2 plus A110q forum not A110
From where u got 4.4 kk rom... Without knowing much y u used sp tool.... Are u able to get into recovery??? Or u didnt flashed it??? Just rooted it...
Click to expand...
Click to collapse
I think it's a noob -_- he doesnt know what he's doing and mixing up random words thinking it'll make sense :|
abhimanyu bajaj said:
How did you root your phone using SP flash? are you sure it was rooted?
And from where did you get the 4.4.2 Rom? There is no such rom
Are you crazy? can you atleast think before doing stuff.. you've probably messed up your phone and you dont even know what you've done
Flash stock V1 rom using SP flash.. and try booting it up
1st boot takes time
Click to expand...
Click to collapse
yes ... i rooted it ,,
sorry its gapps rom/...
can u pls give me links for that rom
& if possible give me tutorials too
Saikrishna.dsk said:
i had rooted my phone using Sp flash tool...
after that when i tried to upgrade rom to 4.4.2 ....
in this process i had downloaded one rom , while installing i got a status 7 error... so i rebooted my phone ...after this failure process, the boot loader only loades and os could not (os crashed )
i connected it pc ,, us sp flash tools , i deleted flash memory and bootloader ( thinking that to get the defaULT os)..:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
unfortunately .... total is been deleted with boot loader ... i could not do any thing with that ,,
now it was unable to on ... when connected to pc .. i will just show some device is connected .. but unable to identify ... it wont display charging status also..
it is like a phone which comes from factory after bulting chips .... no os no boot loader ..
i had given in care also ... but they could not help me ...
i guess u know my problem ...... now i need some software to instal bootloader in to my divice.......
pls pls pls help me:crying::crying:
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Micromax A110 stock rom Download with sptool and driver .
go to download from source
Saikrishna.dsk said:
yes ... i rooted it ,,
sorry its gapps rom/...
can u pls give me links for that rom
& if possible give me tutorials too
Click to expand...
Click to collapse
GApps rom? what are you even saying :|
Saikrishna.dsk said:
yes ... i rooted it ,,
sorry its gapps rom/...
can u pls give me links for that rom
& if possible give me tutorials too
Click to expand...
Click to collapse
You seems to be from another planet... :/ R u an Alien Bro???
Zafarchauhan15 said:
You seems to be from another planet... :/ R u an Alien Bro???
Click to expand...
Click to collapse
Agreed
You've hardbricked your phone. You can reflash stock v1 from sp tools or use fastboot pc software.
Related
As we know recovery is most important aspect before starting development of any phone, so for the same reason i have built ClockworkMod recovery for Micromax A50-Ninja for flashing ROMs and lots of other stuff
Here is the link to recovery image
Click to expand...
Click to collapse
Wow how to flash this recovery?
Here are the steps to install it
You need to be rooted before proceeding further
Step 1:
Download recovery image from above link
Step 2:
Switch off your phone and connect your phone to SP Flash tool
Step 3:
Load the scatter file and recovery image and tick only recovery in flash tool
Step 4:
Flash it and reboot to recovery and voila you are done!!!
Step 5:
Now take a backup of your existing ROM in backup and restore section
OMG!! Thanks for the steps to install it, can we see the photo of it?
Well sure here you go
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks to Ashik Anwar(username: RaptorX88) for testing the recovery and giving photo )
You can hit thanks button if you liked my work
--Reserved for Changelog--
awesome
Thanks Varun!
We are waiting for the new JetMOD.
Thanks..would you like to thank mr.bruno martins
cant we get diff sub forum?
and is there any other way of installing cwm rec without rooting it first..
bandukia said:
cant we get diff sub forum?
and is there any other way of installing cwm rec without rooting it first..
Click to expand...
Click to collapse
Yes it is there
Using SP Flash tool
But its very risky
Many A75 users bricked their phone with SP Flash tool method
So this is safest way
Burned from my laser torch using pencil cells
unable to flash
Unable to flash using Terminal Emulator ..getting error [screenshot]
flash_img : not found
Although have copied flash_img to system/bin and checked all permission
Please guide
Ok try it with this flash_img file
flash_img
Burned from my laser torch using pencil cells
varun.chitre15 said:
Ok try it with this flash_img file
flash_img
Burned from my laser torch using pencil cells
Click to expand...
Click to collapse
1st flash_img file didnt worked for me so i used the 2nd flash_img file!
all worked correctly but i m unable to boot in the CMW recovery, my phone is still booting in normal recovery!! help!!!!
Thread updated with 100% working method
Check it out!!
varun.chitre15 said:
Yes it is there
Using SP Flash tool
But its very risky
Many A75 users bricked their phone with SP Flash tool method
So this is safest way
Click to expand...
Click to collapse
While the post is very helpful indeed for CWm recovery, it dint worked for me as after doing all the steps mentioned there and when it restarts, instead of CWm recovery, it boots into android stock recovery. so thout fr a second and a bulb flashed in my head....Y CANT I DOWNLOAD IT AS I DOWNLOADED boot.img INTO PHONE??? i did it (used the recovery.img from the jetMOD rom instead) and found it perfectly working thanks fr all ur help
Tried to install CWM Recovery using SPF tool..
Now getting this error [check screenshot]
Please see what am i doing wrong ???
Worked for me!
Thanks!!
surajkala said:
Tried to install CWM Recovery using SPF tool..
Now getting this error [check screenshot]
Please see what am i doing wrong ???
Click to expand...
Click to collapse
Which scatter file you used?
coolharsh91 said:
Worked for me!
Thanks!!
Click to expand...
Click to collapse
There is THANKS button given by xda
Burned from my laser torch using pencil cells
Finally .. it worked..
Forgot to switch of my cell .. lolz #noob
varun.chitre15 said:
Which scatter file you used?
Click to expand...
Click to collapse
sp flash tool popping error msg
iam getting the following error check it pls help me
ajeteja said:
iam getting the following error check it pls help me
Click to expand...
Click to collapse
You have to connect the phone in switch off mode not when its running
sp flash tool error
iam running sp flash tool when my phone is switched off
ajeteja said:
iam running sp flash tool when my phone is switched off
Click to expand...
Click to collapse
You have to switch it off and then remove the battery and reinsert it and then without turning on the phone connect it to PC and then flash it
sp flash tool error
iam doing flashing when my phone is switched off pls help me
I just Flashed the CWM on my Micromax and Now my phone not even starting up, no recovery mode even.
Is there any way to flash it back to original rom?
DartzXD said:
I just Flashed the CWM on my Micromax and Now my phone not even starting up, no recovery mode even.
Is there any way to flash it back to original rom?
Click to expand...
Click to collapse
seach it.. it 125mb original stock rom
DartzXD said:
I just Flashed the CWM on my Micromax and Now my phone not even starting up, no recovery mode even.
Is there any way to flash it back to original rom?
Click to expand...
Click to collapse
Have you successfully flashed cwm? If so then use clockwork restore by using backup files.
I have backup my mmx a25 stock rom.If you need backup files then contact me.:good:
tipuhacker said:
Have you successfully flashed cwm? If so then use clockwork restore by using backup files.
I have backup my mmx a25 stock rom.If you need backup files then contact me.:good:
Click to expand...
Click to collapse
It's not even powering on! So we need some other mean of restoring it.
I would definitely appreciate it if you could share it. An acquaintance of mine has an identical phone which has not been rooted yet. Is it possible to take an image and restore it onto this device?
After a great deal of work, I finally found the complete factory image and the scatter file for that. Then in the SPFlash Tool, everything in the list was checked by default - like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
But according to the post by aman.android, http://forum.xda-developers.com/showthread.php?p=35836884, PRELOADER and DSP_BL should be unticked. Maybe I should have checked only the RECOVERY box and unchecked the rest, as I replaced only the RECOVERY earlier.
Now:
I can boot the phone, but not it doesn't continue after the mocromax | smarty splash screen.
I can go up Android system recovery
I'll update the post once I find something new.
vasukinv said:
after a great deal of work, i finally found the complete factory image and the scatter file for that. Then in the spflash tool, everything in the list was checked by default - like this:
but according to the post by aman.android, http://forum.xda-developers.com/showthread.php?p=35836884, preloader and dsp_bl should be unticked. Maybe i should have checked only the recovery box and unchecked the rest, as i replaced only the recovery earlier.
Now:
I can boot the phone, but not it doesn't continue after the mocromax | smarty splash screen.
I can go up android system recovery
i'll update the post once i find something new.
Click to expand...
Click to collapse
just try to flashed cwm.. So thats a smaller way to recover your phone..
rajit said:
just try to flashed cwm.. So thats a smaller way to recover your phone..
Click to expand...
Click to collapse
Done. So one step ahead now! When I go to the recovery screen, it shows the CWM-based Recovery 6.0 screen.
I'm still stuck at the splash screen during the normal boot. What has to be done now?
I need Stock rom.. of A25
tipuhacker said:
Have you successfully flashed cwm? If so then use clockwork restore by using backup files.
I have backup my mmx a25 stock rom.If you need backup files then contact me.:good:
Click to expand...
Click to collapse
I bricked my a25 by flashing it with mmx a56 rom..... i did not back up
please upload a link here,,,, of Stock rom
>>>>>>>bricked mmx a25
I have bricked by mmx a25 (nothing after the splash screen). I m trying to unbrick it since last 8 days but no success. If someone has ever been able to unbrick mmx a25 without giving it to service centre than please share it here.......
need Stock rom of Micromax Smarty a25
cyberpolnet said:
I have bricked by mmx a25 (nothing after the splash screen). I m trying to unbrick it since last 8 days but no success. If someone has ever been able to unbrick mmx a25 without giving it to service centre than please share it here.......
Click to expand...
Click to collapse
My phone is also bricked for past 3 days....searched everywhere in internet......please any one upload stock rom Or Nandroid back up.......
cyberpolnet said:
I have bricked by mmx a25 (nothing after the splash screen). I m trying to unbrick it since last 8 days but no success. If someone has ever been able to unbrick mmx a25 without giving it to service centre than please share it here.......
Click to expand...
Click to collapse
see in my sign
---------- Post added at 10:11 AM ---------- Previous post was at 10:11 AM ----------
cyberpolnet said:
I have bricked by mmx a25 (nothing after the splash screen). I m trying to unbrick it since last 8 days but no success. If someone has ever been able to unbrick mmx a25 without giving it to service centre than please share it here.......
Click to expand...
Click to collapse
dornew05 said:
My phone is also bricked for past 3 days....searched everywhere in internet......please any one upload stock rom Or Nandroid back up.......
Click to expand...
Click to collapse
see in my sign
my micromax a25 is bricked
hello mmembers,
is here for help me ...
my Micromax A25 is bricked after rooting.
i have use sp flash tool but all is vain...
plz guysss help me...
thanks in advance
install cwm in it via sp flash tool then search stock rom for a25 and flash the rom with cwm and ur device will be okk
press thnx if helped
Sent from my A25 using Tapatalk 2
Hey guyz is there any new version of CWM for this device
how can i fix my soft bricked micromax a25
please help ,
when i install boot.img by mastermind1024 from then my device wont start and freezes at startup
DartzXD said:
I just Flashed the CWM on my Micromax and Now my phone not even starting up, no recovery mode even.
Is there any way to flash it back to original rom?
Click to expand...
Click to collapse
Create and flash cwm to the phone using MTK droid tools (just boot into a mode where ADB can communicate with it). see the video below
error on flashing file
rajit said:
just try to flashed cwm.. So thats a smaller way to recover your phone..
Click to expand...
Click to collapse
brom error
gauravmmxa25 said:
brom error
Click to expand...
Click to collapse
ya dude i am also getting the same error
BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (2005)
Internet HELP PLEASE !!!!!
Hi, I need some help here guys to recover my friend's GT-i9003.
Phone is on froyo and was having wifi problems..So i decided to flash it to see if it resolve the wifi issue.
I used odin to flash a CWM (bagaria-09.GT-I9003_PDA.tar) and maybe use that to install a custom firmware on it.
but the problem is that I can't mount internal sd and copy slim bean custom rom on it.
Device will not boot but i can enter cwm and download mode. I can still use odin.
Can someone please tell me how to recover this device and get slim bean on it.
Thanks in advance
If you have download mode, use odin to flash a stock Gingerbread ROM (you can found all the stock ROM on the dev section). After that you can flash a CF Root to get CWM and flash a custom ROM
I just flash I9003XXKPE.zip through odin and now mobile boots but... i cant get any mob signal and baseband is unknown :/
deadpunk said:
I just flash I9003XXKPE.zip through odin and now mobile boots but... i cant get any mob signal and baseband is unknown :/
Click to expand...
Click to collapse
since now you can boot.. just enter recovery mode... take a backup(CWM)... wipe data/cache/dalvik... flash slim bean(or any custom rom).. after flashing is complete again wipe cache and dalvik... reboot.... you should be fine with your baseband and IMEI fixed.
mustafahussain said:
since now you can boot.. just enter recovery mode... take a backup(CWM)... wipe data/cache/dalvik... flash slim bean(or any custom rom).. after flashing is complete again wipe cache and dalvik... reboot.... you should be fine with your baseband and IMEI fixed.
Click to expand...
Click to collapse
I flashed bagaria-09.GT-I9003_PDA and root it but baseband is still unknown. Wifi is working fine now but mobile signal still not working and baseband still unknown.. Maybe a hardware issue ?
and usb mass storage isnt working, any other solution to flash jelly bean on it via odin ?
I will tell my friend that it need repair or maybe use it as an ipod
deadpunk said:
I just flash bagaria-09.GT-I9003_PDA.tar over it and when i tried "volume up + home key + power button" to enter CWM , i get unknown upload mode.
Click to expand...
Click to collapse
dude what did I just said you... did I said you flash bagaria's PDA file???.. download any stock rom for GT-I9003... connect your phone in download mode... open ODIN and flash the stock rom as through ODIN(PDA) only.. then reboot... and now follow the steps that I mentioned in my previous post
mustafahussain said:
since now you can boot.. just enter recovery mode... take a backup(CWM)... wipe data/cache/dalvik... flash slim bean(or any custom rom).. after flashing is complete again wipe cache and dalvik... reboot.... you should be fine with your baseband and IMEI fixed.
Click to expand...
Click to collapse
mustafahussain said:
dude what did I just said you... did I said you flash bagaria's PDA file???.. download any stock rom for GT-I9003... connect your phone in download mode... open ODIN and flash the stock rom as through ODIN(PDA) only.. then reboot... and now follow the steps that I mentioned in my previous post
Click to expand...
Click to collapse
I flash a stock rom but how can i get CWM recovery with stock ?
that's why i flash bagaria to get a working CWM and install custom rom from it.( but i cant mount usb storage or install from internal )
Now i am on Stock 2.3.6 GINGERBREAD.XXKPQ & Rooted but still with unknown baseband.
Here's a pic :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
deadpunk said:
I flash a stock rom but how can i get CWM recovery with stock ?
that's why i flash bagaria to get a working CWM and install custom rom from it.( but i cant mount usb storage or install from internal )
Now i am on Stock 2.3.6 GINGERBREAD.XXKPQ & Rooted but still with unknown baseband.
Here's a pic :
Click to expand...
Click to collapse
earlier you said in your post that you cant get into CWM and download mode... thats why never edit your post once it goes live.. anyways just get CWM for your phone... download the ROM and place it in sd card with the help of a card reader... now flash that ROM.. but I think you got some serious problems with IMEI.. lets hope it gets fixed while flashing
mustafahussain said:
earlier you said in your post that you cant get into CWM and download mode... thats why never edit your post once it goes live.. anyways just get CWM for your phone... download the ROM and place it in sd card with the help of a card reader... now flash that ROM.. but I think you got some serious problems with IMEI.. lets hope it gets fixed while flashing
Click to expand...
Click to collapse
I just flash Slim Bean 4.1.2 and still with baseband unknown :/
Under "Status"
IMEI: unknown
IMEI SV: unknown
Serial number : unknown
I am useing a Android 4.2.2 MT6572 motherboard phone....
I have rooted my phone reently!!:laugh:
But i can't any recovery for my phone.:crying: i tried to make a recovery by MTKDroid tools. But after trying to make the recovery several times. For that my phone got into BOOT LOOP!!!:crying:
PLS HELP ME!!! i need a way to make a recovery safely!!! I hope all exparts Will HELP ME!!!
Killer Boy 007 said:
I am useing a Android 4.2.2 MT6572 motherboard phone....
I have rooted my phone reently!!:laugh:
But i can't any recovery for my phone.:crying: i tried to make a recovery by MTKDroid tools. But after trying to make the recovery several times. For that my phone got into BOOT LOOP!!!:crying:
PLS HELP ME!!! i need a way to make a recovery safely!!! I hope all exparts Will HELP ME!!!
Click to expand...
Click to collapse
U can try to build CWM here http://builder.clockworkmod.com/
If it doesn't work then u can try porting it from another device with the same soc.
Ubifs File System maybe?
Killer Boy 007 said:
I am useing a Android 4.2.2 MT6572 motherboard phone....
I have rooted my phone reently!!:laugh:
But i can't any recovery for my phone.:crying: i tried to make a recovery by MTKDroid tools. But after trying to make the recovery several times. For that my phone got into BOOT LOOP!!!:crying:
PLS HELP ME!!! i need a way to make a recovery safely!!! I hope all exparts Will HELP ME!!!
Click to expand...
Click to collapse
Somebody knows how do that?
I'm using mt6572 with Ubifs....
themanuelrc said:
Somebody knows how do that?
I'm using mt6572 with Ubifs....
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1825722
Automated porting with the tool at the above thread.
Cheers
1650 88885669
Killer Boy 007 said:
I am useing a Android 4.2.2 MT6572 motherboard phone....
I have rooted my phone reently!!:laugh:
But i can't any recovery for my phone.:crying: i tried to make a recovery by MTKDroid tools. But after trying to make the recovery several times. For that my phone got into BOOT LOOP!!!:crying:
PLS HELP ME!!! i need a way to make a recovery safely!!! I hope all exparts Will HELP ME!!!
Click to expand...
Click to collapse
ok it sounds like you dont have a recovery on your phone, first find either cwm or twrp recovery and download to you computer.
After that flash put you phone into bootloader and then flash your recovery to your phone, reboot your phone then go to bootloader then recovery and either cem or twrp will load (depends which one you flashed)
or you can do it like this http://www.youtube.com/watch?v=ssXhvflSTUM
Doesn't work with MT6572 with Ubifs...
pugsang said:
http://forum.xda-developers.com/showthread.php?t=1825722
Automated porting with the tool at the above thread.
Cheers
Click to expand...
Click to collapse
Apparently It doesn't work with MT6572 with Ubifs...(only ext4 for mt6572)... Can anybody confirm this please?
themanuelrc said:
Apparently It doesn't work with MT6572 with Ubifs...(only ext4 for mt6572)... Can anybody confirm this please?
Click to expand...
Click to collapse
It has 2 versions. One for CTR v2.1 for MTK devices with ubifs ONLY
Download link http://d-h.st/B8U
One for CTR v2.2 Recovery for MT6575,15, 77, 17, 89, 82, 88, 92 MT6572 (ext4 only, ubifs not supported)
Obviously the second one is not going to work for you.
Did you tried the first option for CTR v2.1?
pugsang said:
It has 2 versions. One for CTR v2.1 for MTK devices with ubifs ONLY
Download link http://d-h.st/B8U
One for CTR v2.2 Recovery for MT6575,15, 77, 17, 89, 82, 88, 92 MT6572 (ext4 only, ubifs not supported)
Obviously the second one is not going to work for you.
Did you tried the first option for CTR v2.1?
Click to expand...
Click to collapse
Yes, I tried CTR v2.1
The program tells me through messages that's all right, satisfactory. However, the recovery is starting in just a black screen ( turned on but with nothing).
What would be the specific steps before making the procedure? I think it's to have active adb shell, there is something else?
themanuelrc said:
Yes, I tried CTR v2.1
The program tells me through messages that's all right, satisfactory. However, the recovery is starting in just a black screen ( turned on but with nothing).
What would be the specific steps before making the procedure? I think it's to have active adb shell, there is something else?
Click to expand...
Click to collapse
Obviously you need to have all drivers for your phone installed together with the adb drivers, As far as I remember you only need to have your stock recovery.img
When it asks for yes or no press no for manual porting and follow the instructions. It is pretty straight forward.
If you want let me know your phone model to search if I can find at least a stock recovery or upload somewhere your stock recovery to try also if I can help you.
pugsang said:
Obviously you need to have all drivers for your phone installed together with the adb drivers, As far as I remember you only need to have your stock recovery.img
When it asks for yes or no press no for manual porting and follow the instructions. It is pretty straight forward.
If you want let me know your phone model to search if I can find at least a stock recovery or upload somewhere your stock recovery to try also if I can help you.
Click to expand...
Click to collapse
Thanks for your help. I have the stock recovery.img through a backup of the rom.
https://drive.google.com/file/d/0B8tJ8XCaOBv-UnlHY2ZMQklTR1NxSndDRWFCRkpfdmZEVlhJ/edit?usp=sharing
My block maps from MTK Tools Droid
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My device is a Clone S4 with Ubifs and mt6572 processor.
Can you upload your boot.img also? I cannot autoport it since I do not have your device here to plug it in my pc. I will try the manual way. I need to know your screen resolution i.e 540X960 or whatever it is
OK
Try this one
https://mega.co.nz/#!U1UCEYAJ!DXYbDvNbsjSPEBLhKFlT2ZdivenTOoVLY6uVWYRl9HU
It is build with 540X960 resolution.
Create a scatter file with MTK Droid Tools and flash it SP Flash tool
i'm so sorry sir if my question is out of topic, but i have an mt6572 device which is in bootloop state. how can i connect this bootlooped device to a pc to be recognized by mtk droid tools? is it possible to extract the recovery.img from a bootlooped device?
thanks
I have same problem there Can u make a recovery for me plz Recovery.img for MT6572 :crying::crying:
I have problem for may MT6572 with ubiffs (NAND) clone Samsung S7 too. I can`t do backup & recovery from MTKDroid & SP Flash Tool. Have mistake. And can`t get Uboot build v. $ LCD Driver IC, because have`t ROOT, Although the Phone already ROOT. Please help. More inf. is on screen sever have.
Can someone plz make cwm for symphony e25 mt6572 320×480 pixel
---------- Post added at 09:14 PM ---------- Previous post was at 09:11 PM ----------
Or a twrp for symphony e25
Maybe formatted phone or by installing kitkat for q3000.. it's like hard brick .. please someone help ..:crying::crying::crying:
AAAni said:
Maybe formatted phone or by installing kitkat for q3000.. it's like hard brick .. please someone help ..:crying::crying::crying:
Click to expand...
Click to collapse
is it booting and can u go in recovery mode...
AAAni said:
Maybe formatted phone or by installing kitkat for q3000.. it's like hard brick .. please someone help ..:crying::crying::crying:
Click to expand...
Click to collapse
Simply downgrade to Jelly bean!
Hi guys plz help me to solve this problem : Error 4032 (Enable DRAM FAILED) when trying to flash
not booting.. not even showing charging.. sp tool says
Error 4032 (Enable DRAM FAILED).. no recovery.. :crying:
AAAni said:
Hi guys plz help me to solve this problem : Error 4032 (Enable DRAM FAILED) when trying to flash
Click to expand...
Click to collapse
Uninstall drivers from pc and reinstall them correctly, then flash it again.
Sent from my XOLO Q3000
not helping..:crying:
AAAni said:
not helping..:crying:
Click to expand...
Click to collapse
U need to flash whole stock rom either Jelly bean or kitkat as u like.
Xolo Q3000 KK S007 27-05-2014.zip
q3000 stock jb 4.2 s011.7z
download one of above as per ur chioce.
extract it in folder.
download sp flash tools.
Extract it in a folder.
Start sptools.exe
choose scatter loading.
select scatter file from above downloaded firmware folder.
select firmware upgrade.
press download
connect ur mobile in switch off condition.
wait till green circle appears.
Start u mobile.
U need drivers installed before the procedure.
tried every sp tool version ..:crying:
tried many rom ..:crying:
even official roms from needrom.com and androidxda.com
and also the link you've given..(Xolo Q3000 KK S007 27-05-2014.zip & q3000 stock jb 4.2 s011.7z ):crying:
but same error :crying:
BROOM ERROR: S_FT_ENABLE_DRAM_FAIL (4032)
[EMI] Enable DRAM failed!
[HINT]:
please check your load matches to your target which is to be downloaded
please someone help me out..:crying:
AAAni said:
tried every sp tool version ..:crying:
tried many rom ..:crying:
even official roms from needrom.com and androidxda.com
and also the link you've given..(Xolo Q3000 KK S007 27-05-2014.zip & q3000 stock jb 4.2 s011.7z ):crying:
but same error :crying:
BROOM ERROR: S_FT_ENABLE_DRAM_FAIL (4032)
[EMI] Enable DRAM failed!
[HINT]:
please check your load matches to your target which is to be downloaded
please someone help me out..:crying:
Click to expand...
Click to collapse
Just explain each step u doing from the very beginning?
Have u selected firmware upgrade option??
Also post some screenshots
My phone was dead after I formatted with option of "format all + download " in sp tool:crying:
was using "PXZ2-4.3.5-q3000 working" and tried to flash "Xolo Q3000 KK S007 27-05-2014" but i think the process was not successful :crying: and now my phone behave like hard brick but it still recognize by pc without battery but usb port disappear frequently ..
I found 1 solution .. can any one upload backup rom of q3000 using "MTK droid tools" please please please .. http://forum.xda-developers.com/showthread.php?t=2447431&page=5 avi3230 bro ... can you make attachment like in this link of preloder and scatter file for q3ooo?
AAAni said:
My phone was dead after I formatted with option of "format all + download " in sp tool:crying:
was using "PXZ2-4.3.5-q3000 working" and tried to flash "Xolo Q3000 KK S007 27-05-2014" but i think the process was not successful :crying: and now my phone behave like hard brick but it still recognize by pc without battery but usb port disappear frequently ..
I found 1 solution .. can any one upload backup rom of q3000 using "MTK droid tools" please please please .. http://forum.xda-developers.com/showthread.php?t=2447431&page=5 avi3230 bro ... can you make attachment like in this link of preloder and scatter file for q3ooo?
Click to expand...
Click to collapse
Just flash the "Xolo Q3000 KK S007 27-05-2014" firmware as normal, everything will be fine.
Just select firmware upgrade option.
These files are all base files including preloader and scatter ok.
Ur error is cause u formatted preloader , just restore preloader ur phone will boot. :good::good:
If still u cant do it, just PM me.
see this.. error remain same :crying::crying::crying:
Lets start from the base,
Which version of windows r u using & did u hv admin rights?
Sent from my XOLO Q3000 using XDA Free mobile app
tired windows 8.1 32bit & 64 bit, windows 7 32bit with administrative right
In windows 7, install 32 bit drivers, download so flash tool from mtk's official site and flash stock job if ur phone u received with jb ROM else flash kk rom. Flash phone without battery, sim n memory card. Also before flashing, connect our phone with battery inserted and power on. Look whether driver is installed. Drivers to install: mobistel cynus, vcom, pdanet and adb drivers.
Sent from my Q3000 using XDA Free mobile app
its better to take it xolo care..they might charge u but atleast u will get ur phone back...
Same thing happend to me ...
:crying: :crying: After doing a "whole flash format " ... I am able to flash (XOLO Q3000) STOCK ROMS successfully ... But when i start my phone it gets STUCK on BOOTLOOP .... it not charging too..... PLZ HELP ME GUYZ ... wats going wrong here ??? :crying::crying:
---------- Post added at 12:40 PM ---------- Previous post was at 12:35 PM ----------
davis.arkel said:
:crying: :crying: After doing a "whole flash format " ... I am able to flash (XOLO Q3000) STOCK ROMS successfully ... But when i start my phone it gets STUCK on BOOTLOOP .... it not charging too..... PLZ HELP ME GUYZ ... wats going wrong here ??? :crying::crying:
Click to expand...
Click to collapse
and its not entering CUSTOM RECOVERY MODE ALSO (after flashing custom recovery ).. PLZ PLZ PLZ HELP GUYZ ...
davis.arkel said:
:crying: :crying: After doing a "whole flash format " ... I am able to flash (XOLO Q3000) STOCK ROMS successfully ... But when i start my phone it gets STUCK on BOOTLOOP .... it not charging too..... PLZ HELP ME GUYZ ... wats going wrong here ??? :crying::crying:
---------- Post added at 12:40 PM ---------- Previous post was at 12:35 PM ----------
and its not entering CUSTOM RECOVERY MODE ALSO (after flashing custom recovery ).. PLZ PLZ PLZ HELP GUYZ ...
Click to expand...
Click to collapse
Please explain the procedure u followed mentioning the stock rom links.
avi3230 said:
Please explain the procedure u followed mentioning the stock rom links.
Click to expand...
Click to collapse
Well, i was using HNY 15 series ROM(rooted)... and My battery was a bit low .... and the rom had fair number of ISSUES and BUGS ... so i booted into recovery mode and tried to instal a backup to RESTORE the stock version of android, I was using before .... it failed to complete that and got bricked .....
Every tym i started the phone it got stuck in boot loop .... I tried to flash the stock rom (2 -3 times) ( which i flashed before and was using it )...
BUT NO LUCK ... it did the same bootloop thing ...I tried to enter custom recovery (after flashing philz recovery immediately after flashing the rom )...it worrked 2-3 times but after then, no luck , i wasn't able to boot into recovery also ...
SO I got fed-up and made A "WHOLE FORMAT FLASH" (using sp flash tools) ....
After that my device was detected as UNKNOWN DEVICE ... then i searched the forums and was able to install drivers FOR WINDOWS 8......
and i was able to flash again .... later i tried the rom " XOLO Q3000 KK S007 27-05-2014" and stock rom from some website (the one which i was using before)
and one more "XOLO Q3000 S003 15102013" both the first and last roms were given by (xda xolo q3000 member .... i dont remember his name .. but i guess you know him)
1 out of 5 times i am able to get into recovery mode (after flashing custom recovery ) ..... once in CR mode I tried to format INTERNAL SD and it showed " "ERROR : unable to format internal storage "
AND i did a memory test also and everything was good except ERROR: NAND FLASH NOT FOUND .....
.. THANKS IN ADVANCD .... PLz Help
davis.arkel said:
Well, i was using HNY 15 series ROM(rooted)... and My battery was a bit low .... and the rom had fair number of ISSUES and BUGS ... ........
Click to expand...
Click to collapse
follow this link.
use sptools.
if u use version 3 use firmware upgrrade option.
if u use version 5 use fomat+dowload option.