I just Flashed the CWM on my Micromax and Now my phone not even starting up, no recovery mode even.
Is there any way to flash it back to original rom?
DartzXD said:
I just Flashed the CWM on my Micromax and Now my phone not even starting up, no recovery mode even.
Is there any way to flash it back to original rom?
Click to expand...
Click to collapse
seach it.. it 125mb original stock rom
DartzXD said:
I just Flashed the CWM on my Micromax and Now my phone not even starting up, no recovery mode even.
Is there any way to flash it back to original rom?
Click to expand...
Click to collapse
Have you successfully flashed cwm? If so then use clockwork restore by using backup files.
I have backup my mmx a25 stock rom.If you need backup files then contact me.:good:
tipuhacker said:
Have you successfully flashed cwm? If so then use clockwork restore by using backup files.
I have backup my mmx a25 stock rom.If you need backup files then contact me.:good:
Click to expand...
Click to collapse
It's not even powering on! So we need some other mean of restoring it.
I would definitely appreciate it if you could share it. An acquaintance of mine has an identical phone which has not been rooted yet. Is it possible to take an image and restore it onto this device?
After a great deal of work, I finally found the complete factory image and the scatter file for that. Then in the SPFlash Tool, everything in the list was checked by default - like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
But according to the post by aman.android, http://forum.xda-developers.com/showthread.php?p=35836884, PRELOADER and DSP_BL should be unticked. Maybe I should have checked only the RECOVERY box and unchecked the rest, as I replaced only the RECOVERY earlier.
Now:
I can boot the phone, but not it doesn't continue after the mocromax | smarty splash screen.
I can go up Android system recovery
I'll update the post once I find something new.
vasukinv said:
after a great deal of work, i finally found the complete factory image and the scatter file for that. Then in the spflash tool, everything in the list was checked by default - like this:
but according to the post by aman.android, http://forum.xda-developers.com/showthread.php?p=35836884, preloader and dsp_bl should be unticked. Maybe i should have checked only the recovery box and unchecked the rest, as i replaced only the recovery earlier.
Now:
I can boot the phone, but not it doesn't continue after the mocromax | smarty splash screen.
I can go up android system recovery
i'll update the post once i find something new.
Click to expand...
Click to collapse
just try to flashed cwm.. So thats a smaller way to recover your phone..
rajit said:
just try to flashed cwm.. So thats a smaller way to recover your phone..
Click to expand...
Click to collapse
Done. So one step ahead now! When I go to the recovery screen, it shows the CWM-based Recovery 6.0 screen.
I'm still stuck at the splash screen during the normal boot. What has to be done now?
I need Stock rom.. of A25
tipuhacker said:
Have you successfully flashed cwm? If so then use clockwork restore by using backup files.
I have backup my mmx a25 stock rom.If you need backup files then contact me.:good:
Click to expand...
Click to collapse
I bricked my a25 by flashing it with mmx a56 rom..... i did not back up
please upload a link here,,,, of Stock rom
>>>>>>>bricked mmx a25
I have bricked by mmx a25 (nothing after the splash screen). I m trying to unbrick it since last 8 days but no success. If someone has ever been able to unbrick mmx a25 without giving it to service centre than please share it here.......
need Stock rom of Micromax Smarty a25
cyberpolnet said:
I have bricked by mmx a25 (nothing after the splash screen). I m trying to unbrick it since last 8 days but no success. If someone has ever been able to unbrick mmx a25 without giving it to service centre than please share it here.......
Click to expand...
Click to collapse
My phone is also bricked for past 3 days....searched everywhere in internet......please any one upload stock rom Or Nandroid back up.......
cyberpolnet said:
I have bricked by mmx a25 (nothing after the splash screen). I m trying to unbrick it since last 8 days but no success. If someone has ever been able to unbrick mmx a25 without giving it to service centre than please share it here.......
Click to expand...
Click to collapse
see in my sign
---------- Post added at 10:11 AM ---------- Previous post was at 10:11 AM ----------
cyberpolnet said:
I have bricked by mmx a25 (nothing after the splash screen). I m trying to unbrick it since last 8 days but no success. If someone has ever been able to unbrick mmx a25 without giving it to service centre than please share it here.......
Click to expand...
Click to collapse
dornew05 said:
My phone is also bricked for past 3 days....searched everywhere in internet......please any one upload stock rom Or Nandroid back up.......
Click to expand...
Click to collapse
see in my sign
my micromax a25 is bricked
hello mmembers,
is here for help me ...
my Micromax A25 is bricked after rooting.
i have use sp flash tool but all is vain...
plz guysss help me...
thanks in advance
install cwm in it via sp flash tool then search stock rom for a25 and flash the rom with cwm and ur device will be okk
press thnx if helped
Sent from my A25 using Tapatalk 2
Hey guyz is there any new version of CWM for this device
how can i fix my soft bricked micromax a25
please help ,
when i install boot.img by mastermind1024 from then my device wont start and freezes at startup
DartzXD said:
I just Flashed the CWM on my Micromax and Now my phone not even starting up, no recovery mode even.
Is there any way to flash it back to original rom?
Click to expand...
Click to collapse
Create and flash cwm to the phone using MTK droid tools (just boot into a mode where ADB can communicate with it). see the video below
error on flashing file
rajit said:
just try to flashed cwm.. So thats a smaller way to recover your phone..
Click to expand...
Click to collapse
brom error
gauravmmxa25 said:
brom error
Click to expand...
Click to collapse
ya dude i am also getting the same error
BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (2005)
Internet HELP PLEASE !!!!!
Related
As we know recovery is most important aspect before starting development of any phone, so for the same reason i have built ClockworkMod recovery for Micromax A50-Ninja for flashing ROMs and lots of other stuff
Here is the link to recovery image
Click to expand...
Click to collapse
Wow how to flash this recovery?
Here are the steps to install it
You need to be rooted before proceeding further
Step 1:
Download recovery image from above link
Step 2:
Switch off your phone and connect your phone to SP Flash tool
Step 3:
Load the scatter file and recovery image and tick only recovery in flash tool
Step 4:
Flash it and reboot to recovery and voila you are done!!!
Step 5:
Now take a backup of your existing ROM in backup and restore section
OMG!! Thanks for the steps to install it, can we see the photo of it?
Well sure here you go
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks to Ashik Anwar(username: RaptorX88) for testing the recovery and giving photo )
You can hit thanks button if you liked my work
--Reserved for Changelog--
awesome
Thanks Varun!
We are waiting for the new JetMOD.
Thanks..would you like to thank mr.bruno martins
cant we get diff sub forum?
and is there any other way of installing cwm rec without rooting it first..
bandukia said:
cant we get diff sub forum?
and is there any other way of installing cwm rec without rooting it first..
Click to expand...
Click to collapse
Yes it is there
Using SP Flash tool
But its very risky
Many A75 users bricked their phone with SP Flash tool method
So this is safest way
Burned from my laser torch using pencil cells
unable to flash
Unable to flash using Terminal Emulator ..getting error [screenshot]
flash_img : not found
Although have copied flash_img to system/bin and checked all permission
Please guide
Ok try it with this flash_img file
flash_img
Burned from my laser torch using pencil cells
varun.chitre15 said:
Ok try it with this flash_img file
flash_img
Burned from my laser torch using pencil cells
Click to expand...
Click to collapse
1st flash_img file didnt worked for me so i used the 2nd flash_img file!
all worked correctly but i m unable to boot in the CMW recovery, my phone is still booting in normal recovery!! help!!!!
Thread updated with 100% working method
Check it out!!
varun.chitre15 said:
Yes it is there
Using SP Flash tool
But its very risky
Many A75 users bricked their phone with SP Flash tool method
So this is safest way
Click to expand...
Click to collapse
While the post is very helpful indeed for CWm recovery, it dint worked for me as after doing all the steps mentioned there and when it restarts, instead of CWm recovery, it boots into android stock recovery. so thout fr a second and a bulb flashed in my head....Y CANT I DOWNLOAD IT AS I DOWNLOADED boot.img INTO PHONE??? i did it (used the recovery.img from the jetMOD rom instead) and found it perfectly working thanks fr all ur help
Tried to install CWM Recovery using SPF tool..
Now getting this error [check screenshot]
Please see what am i doing wrong ???
Worked for me!
Thanks!!
surajkala said:
Tried to install CWM Recovery using SPF tool..
Now getting this error [check screenshot]
Please see what am i doing wrong ???
Click to expand...
Click to collapse
Which scatter file you used?
coolharsh91 said:
Worked for me!
Thanks!!
Click to expand...
Click to collapse
There is THANKS button given by xda
Burned from my laser torch using pencil cells
Finally .. it worked..
Forgot to switch of my cell .. lolz #noob
varun.chitre15 said:
Which scatter file you used?
Click to expand...
Click to collapse
sp flash tool popping error msg
iam getting the following error check it pls help me
ajeteja said:
iam getting the following error check it pls help me
Click to expand...
Click to collapse
You have to connect the phone in switch off mode not when its running
sp flash tool error
iam running sp flash tool when my phone is switched off
ajeteja said:
iam running sp flash tool when my phone is switched off
Click to expand...
Click to collapse
You have to switch it off and then remove the battery and reinsert it and then without turning on the phone connect it to PC and then flash it
sp flash tool error
iam doing flashing when my phone is switched off pls help me
Hi all, anyone knows how to install CWM recovery on this phone? I can't find any on this forum. I tried the 4010 and 4030 methods, but no luck. Please help and thanks for those who reply.
alcatel 4011x or glory2s pro
i need cwm recory for alcatel ot glory2s pro .............
CWM Recovery for 2s pro 4011x
ggiey said:
i need cwm recory for alcatel ot glory2s pro .............
Click to expand...
Click to collapse
CWM Recovery for Alcatel Glory 2s Pro u will need:
1)Mobileuncle MTK Tools http://goo.gl/BjU5u
2)This file: http://goo.gl/wiY8o
Make sure your battery has some juice before doing this. Download the CWM file and put it to the root of the SD card. Download and run the Mobileuncle MTK tools
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Choose "Recovery update", and the first entry should be the .img file you have downloaded. Follow the steps, and you should have the English version of CWM available. The stock recovery (chinese TWRP, I believe) will be overwritten.
Notice 1: When you update another ROM, be sure to not update the recovery, as the CWM will be overwritten again.
Notice 2: Had tested this on Jiayu G4 and G3S, and since most MT6589 phones are based on the same SoC, I assume this will work with all MT6589 (mostly chinese) based phones on the market.Original sources from: http://forum.xda-developers.com/showthread.php?t=2357875#43435913
Noty Nick said:
CWM Recovery for Alcatel Glory 2s Pro u will need:
1)Mobileuncle MTK Tools http://goo.gl/BjU5u
2)This file: http://goo.gl/wiY8o
Make sure your battery has some juice before doing this. Download the CWM file and put it to the root of the SD card. Download and run the Mobileuncle MTK tools
Choose "Recovery update", and the first entry should be the .img file you have downloaded. Follow the steps, and you should have the English version of CWM available. The stock recovery (chinese TWRP, I believe) will be overwritten.
Notice 1: When you update another ROM, be sure to not update the recovery, as the CWM will be overwritten again.
Notice 2: Had tested this on Jiayu G4 and G3S, and since most MT6589 phones are based on the same SoC, I assume this will work with all MT6589 (mostly chinese) based phones on the market.Original sources from: http://forum.xda-developers.com/showthread.php?t=2357875#43435913
Click to expand...
Click to collapse
I tried it, but still no success. Alcatel OT Glory 2S Pro is MT6575 btw, not MT6589. I don't know if it's different, when I update it will boot into stock recovery.
kebiruan89 said:
I tried it, but still no success. Alcatel OT Glory 2S Pro is MT6575 btw, not MT6589. I don't know if it's different, when I update it will boot into stock recovery.
Click to expand...
Click to collapse
I think i might need your help.... i just bricked mine 4011X.... do u have Nandroid backup?
Noty Nick said:
I think i might need your help.... i just bricked mine 4011X.... do u have Nandroid backup?
Click to expand...
Click to collapse
Sorry I don't have it. Just download ONE TOUCH upgrade for TPOP from alcatel one touch official web.
I can't post the link. I don't know why.
Open zip, you will see 2 files, one is called "Mobile upgrade S4.0.2(for 4011) which is the correct one.
I unbricked my phone a week ago using this software and 100% works.
kebiruan89 said:
Sorry I don't have it. Just download ONE TOUCH upgrade for TPOP from alcatel one touch official web.
I can't post the link. I don't know why.
Open zip, you will see 2 files, one is called "Mobile upgrade S4.0.2(for 4011) which is the correct one.
I unbricked my phone a week ago using this software and 100% works.
Click to expand...
Click to collapse
i bricked my phone till no usb detected...
kebiruan89 said:
I tried it, but still no success. Alcatel OT Glory 2S Pro is MT6575 btw, not MT6589. I don't know if it's different, when I update it will boot into stock recovery.
Click to expand...
Click to collapse
i already try this Mobileuncle MTK Tools but still not working....when i try to boot CWM it still boot recovery only
ggiey said:
i already try this Mobileuncle MTK Tools but still not working....when i try to boot CWM it still boot recovery only
Click to expand...
Click to collapse
Yup, really hard to find which version is suitable for this phone.
Noty Nick said:
i bricked my phone till no usb detected...
Click to expand...
Click to collapse
Did you try using 'One Touch Upgrade' like I said? It still can detect your phone when it's off. Don't forget to install 'alcatel one touch manager' first for the driver. I think you have a same problem as me back then, but still managed to unbrick it using these softwares.
kebiruan89 said:
Did you try using 'One Touch Upgrade' like I said? It still can detect your phone when it's off. Don't forget to install 'alcatel one touch manager' first for the driver. I think you have a same problem as me back then, but still managed to unbrick it using these softwares.
Click to expand...
Click to collapse
cant unbrick also... its show out that my phone currently are running the latest updates.... but its ok... i send back to TenTen for warranty d... thanks by the way and i bought a new OT_4030D/ S-POP.... ~~
kebiruan89 said:
Sorry I don't have it. Just download ONE TOUCH upgrade for TPOP from alcatel one touch official web.
I can't post the link. I don't know why.
Open zip, you will see 2 files, one is called "Mobile upgrade S4.0.2(for 4011) which is the correct one.
I unbricked my phone a week ago using this software and 100% works.
Click to expand...
Click to collapse
are you download from here???
I'm using onetouch glory 2s pro 4011x
ggiey said:
i need cwm recory for alcatel ot glory2s pro .............
Click to expand...
Click to collapse
create cwm using mtk driod tool...........finally aku succes ........but i found a bug on it.............it's cannot create backup in mode cwm.....
Hi All,
to use mobileuncle u must root ur device 1st, then u only can replace/flash the CWM, u can use a same method to root ur phone by using 4010x. or u can use bin4ry method.. thanks
Alcatel glory 2s pro - 4011x
Root or unroot using VRoot_1.6.0 english.
Install PDANet (32bit or 64bit)
Phone: Copy recovery.img to data/local
PC: open flash cwm OTG 4011X folder.. run flash-it-> to install CWM
Then update superuser1.65.zip to replace the china one thru CWM.
File refer to "a d f. l y/Tw7C1"
CWM can only backup system, data but exclude "custpack" folder..
cwm not support that.. need to manually create custpack installer zip.
1.restore nandroid backup.
2.install custpackinstaller.zip
Thats my method for the time being..
Or..........
If using TWRP... download TWRP recovery for alcatel s'pop,
Using Mobile uncle tools not working but working as below:
-Phone: Copy TWRPrecovery.img to data/local, rename it to recovery.img
-PC: open flash cwm OTG 4011X folder.. run flash-it-> to install TWRP
Reboot recovery and backup your data include custpack folder..
kebiruan89 said:
Sorry I don't have it. Just download ONE TOUCH upgrade for TPOP from alcatel one touch official web.
I can't post the link. I don't know why.
Open zip, you will see 2 files, one is called "Mobile upgrade S4.0.2(for 4011) which is the correct one.
I unbricked my phone a week ago using this software and 100% works.
Click to expand...
Click to collapse
:laugh:Thank you so much.. I bricked my phone, keep google search but no solution, untill saw your posted. Help me much~~~:good::good::good:
alcatel one touch glory 2s pro 4011x
Hi, anyone can help me please?...Here is my problem, pass few day, I try to format my alcatel one touch glory 2s pro 4011x SD card from my laptop which connected to the mobile phone. In fact, I connected it through SD card but it was actually connected through internal storage of the phone and I didn't even realised about that. So, I format it but on the way formatting it, I accidentally shut down my laptop. Bad thing happened then, I can't power on my phone after that. Any luck on this case guys???
Hi guys, can you guys give me the recovery backup file (such as "update.zip" )for 4011x. Thanks
ClockWorkMod 6.0 Touch Recovery-First of all download the files- recovery.tar.zip & Odin3.07.zip,
-Unzip both the files,
-Flash recovery.tar via Odin 3.07 (As PDA)..
This recovery has been ported by me from Galaxy Star Duos..
RootFor Rooting Download the attached Superuser.zip file & flash it via Clockworkmod Recovery.
sahaj360 said:
Samsung Galaxy Star Pro Duos GT-S7262
Ported CWM 6.0 Touch Recovery
-Download the attached recovery.tar.zip,
-Unzip it,
-Flash recovery.tar via Odin 3.07 (As PDA)..
It has been ported by me from galaxy star duos..
Click to expand...
Click to collapse
flashed via odin but not able to go into recovery
muddasir121 said:
flashed via odin but not able to go into recovery
Click to expand...
Click to collapse
Try adb reboot recovery you have to install adb and samsung drivers first i know its a bit of a hassel but its the best method ....
Try This
To boot into CWM recovery, turn off your phone complete, then turn it on by pressing and holding Volume Up + Volume Down + Home + Power Key, Let me know if it works or not
stil no recovery access
um009 said:
To boot into CWM recovery, turn off your phone complete, then turn it on by pressing and holding Volume Up + Volume Down + Home + Power Key, Let me know if it works or not
Click to expand...
Click to collapse
hello...
i did and follow the same steps as mention above.but stil i m booting in stock recovery no cwm acess.how can i flash cwm recovery..
sahaj360 said:
ClockWorkMod 6.0 Touch Recovery-First of all download the files- recovery.tar.zip & Odin3.07.zip,
-Unzip both the files,
-Flash recovery.tar via Odin 3.07 (As PDA)..
This recovery has been ported by me from Galaxy Star Duos..
RootFor Rooting Download the attached Superuser.zip file & flash it via Clockworkmod Recovery.
Click to expand...
Click to collapse
Can I go back to stock recovery after the root without reflashing the stock rom through odin?
Or maybe can we have temporary recovery instead of permanent one?
Thanks
how to enter recovery manually?
not working for me..
k.d.s said:
not working for me..
Click to expand...
Click to collapse
check this thred ,try it and report . help us by reporting thanks
http://forum.xda-developers.com/showthread.php?p=52404464
vishal.ghodake said:
check this thred ,try it and report . help us by reporting thanks
http://forum.xda-developers.com/showthread.php?p=52404464
Click to expand...
Click to collapse
No cant try it now. cuz Already Rooted yesterday after much pain finally succeeded :good:
k.d.s said:
No cant try it now. cuz Already Rooted yesterday after much pain finally succeeded :good:
Click to expand...
Click to collapse
how you rooted star pro.......?
please share some details
your baseband version,kernal version,build no... setting > about
and your rooting guide ....i try to root my mobile more than one mongth no solution.
please help bro...
vishal.ghodake said:
how you rooted star pro.......?
please share some details
your baseband version,kernal version,build no... setting > about
and your rooting guide ....i try to root my mobile more than one mongth no solution.
please help bro...
Click to expand...
Click to collapse
For rooting please follow this link :
http://forum.xda-developers.com/showthread.php?t=2706644
...ROOTING...
First flash recovery.tar by odin
And i know, it cant go to recovery mode...
turn off the phone ,flash the boot which i attached below, via odin AS bootloader
and itself gone to recovery automatically , you can now install the superuser
Put superuser.zip in SDcard because it will not detect phone memory
Hope i Helped you Bro :good:
and i will post some screen too if i get chance. i just rooted my phone not install any custom Rom yet
k.d.s said:
For rooting please follow this link :
http://forum.xda-developers.com/showthread.php?t=2706644
...ROOTING...
First flash recovery.tar by odin
And i know, it cant go to recovery mode...
turn off the phone ,flash the boot which i attached below, via odin AS bootloader
and itself gone to recovery automatically , you can now install the superuser
Put superuser.zip in SDcard because it will not detect phone memory
Hope i Helped you Bro :good:
and i will post some screen too if i get chance. i just rooted my phone not install any custom Rom yet
Click to expand...
Click to collapse
thanks bro
vishal.ghodake said:
thanks bro
Click to expand...
Click to collapse
I checked no screen shot option here in this Phone but i clicked some pick from my S3 just to show you. some picks.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hope it help Bro
Enjoy Rooting
k.d.s said:
I checked no screen shot option here in this Phone but i clicked some pick from my S3 just to show you. some picks.
Hope it help Bro
Enjoy Rooting
Click to expand...
Click to collapse
thanks
I bought a new Samsung galaxy star pro s7262 but when I go to recovery mode I don't get the option '' install from sd card ''.. Please give me the solution of it...
sahaj360 said:
ClockWorkMod 6.0 Touch Recovery-First of all download the files- recovery.tar.zip & Odin3.07.zip,
-Unzip both the files,
-Flash recovery.tar via Odin 3.07 (As PDA)..
This recovery has been ported by me from Galaxy Star Duos..
RootFor Rooting Download the attached Superuser.zip file & flash it via Clockworkmod Recovery.
Click to expand...
Click to collapse
my problem Is that my current version is xxuand2 and when I try to install cwm recovery on it my screen turns white while booting in recovery mode and I have aldo seen in many posts that reverting back to xxuaml4 rom creates a havock of entire white screen on the phone
so dude what to do now I think its impossible to root my galaxy star pro
NOTE:I have already rooted my phone with xxuaml4 rom but then due to installing chainfire 3d app I bricked my samsung galaxy star pro and ti unbrickit I had to install xxuand2 rom
si pls tell me now how to root it???
abhishekpandey.468 said:
my problem Is that my current version is xxuand2 and when I try to install cwm recovery on it my screen turns white while booting in recovery mode and I have aldo seen in many posts that reverting back to xxuaml4 rom creates a havock of entire white screen on the phone
so dude what to do now I think its impossible to root my galaxy star pro
NOTE:I have already rooted my phone with xxuaml4 rom but then due to installing chainfire 3d app I bricked my samsung galaxy star pro and ti unbrickit I had to install xxuand2 rom
si pls tell me now how to root it???
Click to expand...
Click to collapse
Follow instructions at end of this thread
http://forum.xda-developers.com/showthread.php?p=53940974
Were is the boot file brother, please attach again.
it work with samsung galaxy star plus DOUS ?? it desame with GT-7262 ?
I am useing a Android 4.2.2 MT6572 motherboard phone....
I have rooted my phone reently!!:laugh:
But i can't any recovery for my phone.:crying: i tried to make a recovery by MTKDroid tools. But after trying to make the recovery several times. For that my phone got into BOOT LOOP!!!:crying:
PLS HELP ME!!! i need a way to make a recovery safely!!! I hope all exparts Will HELP ME!!!
Killer Boy 007 said:
I am useing a Android 4.2.2 MT6572 motherboard phone....
I have rooted my phone reently!!:laugh:
But i can't any recovery for my phone.:crying: i tried to make a recovery by MTKDroid tools. But after trying to make the recovery several times. For that my phone got into BOOT LOOP!!!:crying:
PLS HELP ME!!! i need a way to make a recovery safely!!! I hope all exparts Will HELP ME!!!
Click to expand...
Click to collapse
U can try to build CWM here http://builder.clockworkmod.com/
If it doesn't work then u can try porting it from another device with the same soc.
Ubifs File System maybe?
Killer Boy 007 said:
I am useing a Android 4.2.2 MT6572 motherboard phone....
I have rooted my phone reently!!:laugh:
But i can't any recovery for my phone.:crying: i tried to make a recovery by MTKDroid tools. But after trying to make the recovery several times. For that my phone got into BOOT LOOP!!!:crying:
PLS HELP ME!!! i need a way to make a recovery safely!!! I hope all exparts Will HELP ME!!!
Click to expand...
Click to collapse
Somebody knows how do that?
I'm using mt6572 with Ubifs....
themanuelrc said:
Somebody knows how do that?
I'm using mt6572 with Ubifs....
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1825722
Automated porting with the tool at the above thread.
Cheers
1650 88885669
Killer Boy 007 said:
I am useing a Android 4.2.2 MT6572 motherboard phone....
I have rooted my phone reently!!:laugh:
But i can't any recovery for my phone.:crying: i tried to make a recovery by MTKDroid tools. But after trying to make the recovery several times. For that my phone got into BOOT LOOP!!!:crying:
PLS HELP ME!!! i need a way to make a recovery safely!!! I hope all exparts Will HELP ME!!!
Click to expand...
Click to collapse
ok it sounds like you dont have a recovery on your phone, first find either cwm or twrp recovery and download to you computer.
After that flash put you phone into bootloader and then flash your recovery to your phone, reboot your phone then go to bootloader then recovery and either cem or twrp will load (depends which one you flashed)
or you can do it like this http://www.youtube.com/watch?v=ssXhvflSTUM
Doesn't work with MT6572 with Ubifs...
pugsang said:
http://forum.xda-developers.com/showthread.php?t=1825722
Automated porting with the tool at the above thread.
Cheers
Click to expand...
Click to collapse
Apparently It doesn't work with MT6572 with Ubifs...(only ext4 for mt6572)... Can anybody confirm this please?
themanuelrc said:
Apparently It doesn't work with MT6572 with Ubifs...(only ext4 for mt6572)... Can anybody confirm this please?
Click to expand...
Click to collapse
It has 2 versions. One for CTR v2.1 for MTK devices with ubifs ONLY
Download link http://d-h.st/B8U
One for CTR v2.2 Recovery for MT6575,15, 77, 17, 89, 82, 88, 92 MT6572 (ext4 only, ubifs not supported)
Obviously the second one is not going to work for you.
Did you tried the first option for CTR v2.1?
pugsang said:
It has 2 versions. One for CTR v2.1 for MTK devices with ubifs ONLY
Download link http://d-h.st/B8U
One for CTR v2.2 Recovery for MT6575,15, 77, 17, 89, 82, 88, 92 MT6572 (ext4 only, ubifs not supported)
Obviously the second one is not going to work for you.
Did you tried the first option for CTR v2.1?
Click to expand...
Click to collapse
Yes, I tried CTR v2.1
The program tells me through messages that's all right, satisfactory. However, the recovery is starting in just a black screen ( turned on but with nothing).
What would be the specific steps before making the procedure? I think it's to have active adb shell, there is something else?
themanuelrc said:
Yes, I tried CTR v2.1
The program tells me through messages that's all right, satisfactory. However, the recovery is starting in just a black screen ( turned on but with nothing).
What would be the specific steps before making the procedure? I think it's to have active adb shell, there is something else?
Click to expand...
Click to collapse
Obviously you need to have all drivers for your phone installed together with the adb drivers, As far as I remember you only need to have your stock recovery.img
When it asks for yes or no press no for manual porting and follow the instructions. It is pretty straight forward.
If you want let me know your phone model to search if I can find at least a stock recovery or upload somewhere your stock recovery to try also if I can help you.
pugsang said:
Obviously you need to have all drivers for your phone installed together with the adb drivers, As far as I remember you only need to have your stock recovery.img
When it asks for yes or no press no for manual porting and follow the instructions. It is pretty straight forward.
If you want let me know your phone model to search if I can find at least a stock recovery or upload somewhere your stock recovery to try also if I can help you.
Click to expand...
Click to collapse
Thanks for your help. I have the stock recovery.img through a backup of the rom.
https://drive.google.com/file/d/0B8tJ8XCaOBv-UnlHY2ZMQklTR1NxSndDRWFCRkpfdmZEVlhJ/edit?usp=sharing
My block maps from MTK Tools Droid
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My device is a Clone S4 with Ubifs and mt6572 processor.
Can you upload your boot.img also? I cannot autoport it since I do not have your device here to plug it in my pc. I will try the manual way. I need to know your screen resolution i.e 540X960 or whatever it is
OK
Try this one
https://mega.co.nz/#!U1UCEYAJ!DXYbDvNbsjSPEBLhKFlT2ZdivenTOoVLY6uVWYRl9HU
It is build with 540X960 resolution.
Create a scatter file with MTK Droid Tools and flash it SP Flash tool
i'm so sorry sir if my question is out of topic, but i have an mt6572 device which is in bootloop state. how can i connect this bootlooped device to a pc to be recognized by mtk droid tools? is it possible to extract the recovery.img from a bootlooped device?
thanks
I have same problem there Can u make a recovery for me plz Recovery.img for MT6572 :crying::crying:
I have problem for may MT6572 with ubiffs (NAND) clone Samsung S7 too. I can`t do backup & recovery from MTKDroid & SP Flash Tool. Have mistake. And can`t get Uboot build v. $ LCD Driver IC, because have`t ROOT, Although the Phone already ROOT. Please help. More inf. is on screen sever have.
Can someone plz make cwm for symphony e25 mt6572 320×480 pixel
---------- Post added at 09:14 PM ---------- Previous post was at 09:11 PM ----------
Or a twrp for symphony e25
i had rooted my phone using Sp flash tool...
after that when i tried to upgrade rom to 4.4.2 ....
in this process i had downloaded one rom , while installing i got a status 7 error... so i rebooted my phone ...after this failure process, the boot loader only loades and os could not (os crashed )
i connected it pc ,, us sp flash tools , i deleted flash memory and bootloader ( thinking that to get the defaULT os)..:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
unfortunately .... total is been deleted with boot loader ... i could not do any thing with that ,,
now it was unable to on ... when connected to pc .. i will just show some device is connected .. but unable to identify ... it wont display charging status also..
it is like a phone which comes from factory after bulting chips .... no os no boot loader ..
i had given in care also ... but they could not help me ...
i guess u know my problem ...... now i need some software to instal bootloader in to my divice.......
pls pls pls help me:crying::crying:
Saikrishna.dsk said:
i had rooted my phone using Sp flash tool...
after that when i tried to upgrade rom to 4.4.2 ....
in this process i had downloaded one rom , while installing i got a status 7 error... so i rebooted my phone ...after this failure process, the boot loader only loades and os could not (os crashed )
i connected it pc ,, us sp flash tools , i deleted flash memory and bootloader ( thinking that to get the defaULT os)..:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
unfortunately .... total is been deleted with boot loader ... i could not do any thing with that ,,
now it was unable to on ... when connected to pc .. i will just show some device is connected .. but unable to identify ... it wont display charging status also..
it is like a phone which comes from factory after bulting chips .... no os no boot loader ..
i had given in care also ... but they could not help me ...
i guess u know my problem ...... now i need some software to instal bootloader in to my divice.......
pls pls pls help me:crying::crying:
Click to expand...
Click to collapse
How did you root your phone using SP flash? are you sure it was rooted?
And from where did you get the 4.4.2 Rom? There is no such rom
Are you crazy? can you atleast think before doing stuff.. you've probably messed up your phone and you dont even know what you've done
Flash stock V1 rom using SP flash.. and try booting it up
1st boot takes time
U messed up ur phone ...
Saikrishna.dsk said:
i had rooted my phone using Sp flash tool...
after that when i tried to upgrade rom to 4.4.2 ....
in this process i had downloaded one rom , while installing i got a status 7 error... so i rebooted my phone ...after this failure process, the boot loader only loades and os could not (os crashed )
i connected it pc ,, us sp flash tools , i deleted flash memory and bootloader ( thinking that to get the defaULT os)..:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
unfortunately .... total is been deleted with boot loader ... i could not do any thing with that ,,
now it was unable to on ... when connected to pc .. i will just show some device is connected .. but unable to identify ... it wont display charging status also..
it is like a phone which comes from factory after bulting chips .... no os no boot loader ..
i had given in care also ... but they could not help me ...
i guess u know my problem ...... now i need some software to instal bootloader in to my divice.......
pls pls pls help me:crying::crying:
Click to expand...
Click to collapse
Bootloader in Micromax Canvas 2 plus???? :/
This is canvas 2 plus A110q forum not A110
From where u got 4.4 kk rom... Without knowing much y u used sp tool.... Are u able to get into recovery??? Or u didnt flashed it??? Just rooted it...
Zafarchauhan15 said:
Bootloader in Micromax Canvas 2 plus???? :/
This is canvas 2 plus A110q forum not A110
From where u got 4.4 kk rom... Without knowing much y u used sp tool.... Are u able to get into recovery??? Or u didnt flashed it??? Just rooted it...
Click to expand...
Click to collapse
I think it's a noob -_- he doesnt know what he's doing and mixing up random words thinking it'll make sense :|
abhimanyu bajaj said:
How did you root your phone using SP flash? are you sure it was rooted?
And from where did you get the 4.4.2 Rom? There is no such rom
Are you crazy? can you atleast think before doing stuff.. you've probably messed up your phone and you dont even know what you've done
Flash stock V1 rom using SP flash.. and try booting it up
1st boot takes time
Click to expand...
Click to collapse
yes ... i rooted it ,,
sorry its gapps rom/...
can u pls give me links for that rom
& if possible give me tutorials too
Saikrishna.dsk said:
i had rooted my phone using Sp flash tool...
after that when i tried to upgrade rom to 4.4.2 ....
in this process i had downloaded one rom , while installing i got a status 7 error... so i rebooted my phone ...after this failure process, the boot loader only loades and os could not (os crashed )
i connected it pc ,, us sp flash tools , i deleted flash memory and bootloader ( thinking that to get the defaULT os)..:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
unfortunately .... total is been deleted with boot loader ... i could not do any thing with that ,,
now it was unable to on ... when connected to pc .. i will just show some device is connected .. but unable to identify ... it wont display charging status also..
it is like a phone which comes from factory after bulting chips .... no os no boot loader ..
i had given in care also ... but they could not help me ...
i guess u know my problem ...... now i need some software to instal bootloader in to my divice.......
pls pls pls help me:crying::crying:
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Micromax A110 stock rom Download with sptool and driver .
go to download from source
Saikrishna.dsk said:
yes ... i rooted it ,,
sorry its gapps rom/...
can u pls give me links for that rom
& if possible give me tutorials too
Click to expand...
Click to collapse
GApps rom? what are you even saying :|
Saikrishna.dsk said:
yes ... i rooted it ,,
sorry its gapps rom/...
can u pls give me links for that rom
& if possible give me tutorials too
Click to expand...
Click to collapse
You seems to be from another planet... :/ R u an Alien Bro???
Zafarchauhan15 said:
You seems to be from another planet... :/ R u an Alien Bro???
Click to expand...
Click to collapse
Agreed
You've hardbricked your phone. You can reflash stock v1 from sp tools or use fastboot pc software.