Database Info

[RECOVERY][10-June-2012]ClockworkMod Recovery 5.8.1.9|Micromax A50-Ninja|Stable

As we know recovery is most important aspect before starting development of any phone, so for the same reason i have built ClockworkMod recovery for Micromax A50-Ninja for flashing ROMs and lots of other stuff
Here is the link to recovery image
Click to expand...
Click to collapse
Wow how to flash this recovery?
Here are the steps to install it
You need to be rooted before proceeding further
Step 1:
Download recovery image from above link
Step 2:
Switch off your phone and connect your phone to SP Flash tool
Step 3:
Load the scatter file and recovery image and tick only recovery in flash tool
Step 4:
Flash it and reboot to recovery and voila you are done!!!
Step 5:
Now take a backup of your existing ROM in backup and restore section
OMG!! Thanks for the steps to install it, can we see the photo of it?
Well sure here you go
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks to Ashik Anwar(username: RaptorX88) for testing the recovery and giving photo )
You can hit thanks button if you liked my work

--Reserved for Changelog--

awesome
Thanks Varun!
We are waiting for the new JetMOD.

Thanks..would you like to thank mr.bruno martins

cant we get diff sub forum?
and is there any other way of installing cwm rec without rooting it first..

bandukia said:
cant we get diff sub forum?
and is there any other way of installing cwm rec without rooting it first..
Click to expand...
Click to collapse
Yes it is there
Using SP Flash tool
But its very risky
Many A75 users bricked their phone with SP Flash tool method
So this is safest way
Burned from my laser torch using pencil cells

unable to flash
Unable to flash using Terminal Emulator ..getting error [screenshot]
flash_img : not found
Although have copied flash_img to system/bin and checked all permission
Please guide

Ok try it with this flash_img file
flash_img
Burned from my laser torch using pencil cells

varun.chitre15 said:
Ok try it with this flash_img file
flash_img
Burned from my laser torch using pencil cells
Click to expand...
Click to collapse
1st flash_img file didnt worked for me so i used the 2nd flash_img file!
all worked correctly but i m unable to boot in the CMW recovery, my phone is still booting in normal recovery!! help!!!!

Thread updated with 100% working method
Check it out!!

varun.chitre15 said:
Yes it is there
Using SP Flash tool
But its very risky
Many A75 users bricked their phone with SP Flash tool method
So this is safest way
Click to expand...
Click to collapse
While the post is very helpful indeed for CWm recovery, it dint worked for me as after doing all the steps mentioned there and when it restarts, instead of CWm recovery, it boots into android stock recovery. so thout fr a second and a bulb flashed in my head....Y CANT I DOWNLOAD IT AS I DOWNLOADED boot.img INTO PHONE??? i did it (used the recovery.img from the jetMOD rom instead) and found it perfectly working thanks fr all ur help

Tried to install CWM Recovery using SPF tool..
Now getting this error [check screenshot]
Please see what am i doing wrong ???

Worked for me!
Thanks!!

surajkala said:
Tried to install CWM Recovery using SPF tool..
Now getting this error [check screenshot]
Please see what am i doing wrong ???
Click to expand...
Click to collapse
Which scatter file you used?
coolharsh91 said:
Worked for me!
Thanks!!
Click to expand...
Click to collapse
There is THANKS button given by xda
Burned from my laser torch using pencil cells

Finally .. it worked..
Forgot to switch of my cell .. lolz #noob
varun.chitre15 said:
Which scatter file you used?
Click to expand...
Click to collapse

sp flash tool popping error msg
iam getting the following error check it pls help me

ajeteja said:
iam getting the following error check it pls help me
Click to expand...
Click to collapse
You have to connect the phone in switch off mode not when its running

sp flash tool error
iam running sp flash tool when my phone is switched off

ajeteja said:
iam running sp flash tool when my phone is switched off
Click to expand...
Click to collapse
You have to switch it off and then remove the battery and reinsert it and then without turning on the phone connect it to PC and then flash it

sp flash tool error
iam doing flashing when my phone is switched off pls help me

[Q] Help! Micromax A25 Bricked after Flashing CWM

I just Flashed the CWM on my Micromax and Now my phone not even starting up, no recovery mode even.
Is there any way to flash it back to original rom?

DartzXD said:
I just Flashed the CWM on my Micromax and Now my phone not even starting up, no recovery mode even.
Is there any way to flash it back to original rom?
Click to expand...
Click to collapse
seach it.. it 125mb original stock rom

DartzXD said:
I just Flashed the CWM on my Micromax and Now my phone not even starting up, no recovery mode even.
Is there any way to flash it back to original rom?
Click to expand...
Click to collapse
Have you successfully flashed cwm? If so then use clockwork restore by using backup files.
I have backup my mmx a25 stock rom.If you need backup files then contact me.:good:

tipuhacker said:
Have you successfully flashed cwm? If so then use clockwork restore by using backup files.
I have backup my mmx a25 stock rom.If you need backup files then contact me.:good:
Click to expand...
Click to collapse
It's not even powering on! So we need some other mean of restoring it.
I would definitely appreciate it if you could share it. An acquaintance of mine has an identical phone which has not been rooted yet. Is it possible to take an image and restore it onto this device?

After a great deal of work, I finally found the complete factory image and the scatter file for that. Then in the SPFlash Tool, everything in the list was checked by default - like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
But according to the post by aman.android, http://forum.xda-developers.com/showthread.php?p=35836884, PRELOADER and DSP_BL should be unticked. Maybe I should have checked only the RECOVERY box and unchecked the rest, as I replaced only the RECOVERY earlier.
Now:
I can boot the phone, but not it doesn't continue after the mocromax | smarty splash screen.
I can go up Android system recovery
I'll update the post once I find something new.

vasukinv said:
after a great deal of work, i finally found the complete factory image and the scatter file for that. Then in the spflash tool, everything in the list was checked by default - like this:
but according to the post by aman.android, http://forum.xda-developers.com/showthread.php?p=35836884, preloader and dsp_bl should be unticked. Maybe i should have checked only the recovery box and unchecked the rest, as i replaced only the recovery earlier.
Now:
I can boot the phone, but not it doesn't continue after the mocromax | smarty splash screen.
I can go up android system recovery
i'll update the post once i find something new.
Click to expand...
Click to collapse
just try to flashed cwm.. So thats a smaller way to recover your phone..

rajit said:
just try to flashed cwm.. So thats a smaller way to recover your phone..
Click to expand...
Click to collapse
Done. So one step ahead now! When I go to the recovery screen, it shows the CWM-based Recovery 6.0 screen.
I'm still stuck at the splash screen during the normal boot. What has to be done now?

I need Stock rom.. of A25
tipuhacker said:
Have you successfully flashed cwm? If so then use clockwork restore by using backup files.
I have backup my mmx a25 stock rom.If you need backup files then contact me.:good:
Click to expand...
Click to collapse
I bricked my a25 by flashing it with mmx a56 rom..... i did not back up
please upload a link here,,,, of Stock rom

>>>>>>>bricked mmx a25
I have bricked by mmx a25 (nothing after the splash screen). I m trying to unbrick it since last 8 days but no success. If someone has ever been able to unbrick mmx a25 without giving it to service centre than please share it here.......

need Stock rom of Micromax Smarty a25
cyberpolnet said:
I have bricked by mmx a25 (nothing after the splash screen). I m trying to unbrick it since last 8 days but no success. If someone has ever been able to unbrick mmx a25 without giving it to service centre than please share it here.......
Click to expand...
Click to collapse
My phone is also bricked for past 3 days....searched everywhere in internet......please any one upload stock rom Or Nandroid back up.......

cyberpolnet said:
I have bricked by mmx a25 (nothing after the splash screen). I m trying to unbrick it since last 8 days but no success. If someone has ever been able to unbrick mmx a25 without giving it to service centre than please share it here.......
Click to expand...
Click to collapse
see in my sign
---------- Post added at 10:11 AM ---------- Previous post was at 10:11 AM ----------
cyberpolnet said:
I have bricked by mmx a25 (nothing after the splash screen). I m trying to unbrick it since last 8 days but no success. If someone has ever been able to unbrick mmx a25 without giving it to service centre than please share it here.......
Click to expand...
Click to collapse
dornew05 said:
My phone is also bricked for past 3 days....searched everywhere in internet......please any one upload stock rom Or Nandroid back up.......
Click to expand...
Click to collapse
see in my sign

my micromax a25 is bricked
hello mmembers,
is here for help me ...
my Micromax A25 is bricked after rooting.
i have use sp flash tool but all is vain...
plz guysss help me...
thanks in advance

install cwm in it via sp flash tool then search stock rom for a25 and flash the rom with cwm and ur device will be okk
press thnx if helped
Sent from my A25 using Tapatalk 2

Hey guyz is there any new version of CWM for this device

how can i fix my soft bricked micromax a25
please help ,
when i install boot.img by mastermind1024 from then my device wont start and freezes at startup

DartzXD said:
I just Flashed the CWM on my Micromax and Now my phone not even starting up, no recovery mode even.
Is there any way to flash it back to original rom?
Click to expand...
Click to collapse
Create and flash cwm to the phone using MTK droid tools (just boot into a mode where ADB can communicate with it). see the video below

error on flashing file
rajit said:
just try to flashed cwm.. So thats a smaller way to recover your phone..
Click to expand...
Click to collapse
brom error

gauravmmxa25 said:
brom error
Click to expand...
Click to collapse
ya dude i am also getting the same error
BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (2005)
Internet HELP PLEASE !!!!!

[Q] CWM recovery for Alcatel one touch 4011x a.k.a glory 2s PRO

Hi all, anyone knows how to install CWM recovery on this phone? I can't find any on this forum. I tried the 4010 and 4030 methods, but no luck. Please help and thanks for those who reply.

alcatel 4011x or glory2s pro
i need cwm recory for alcatel ot glory2s pro .............

CWM Recovery for 2s pro 4011x
ggiey said:
i need cwm recory for alcatel ot glory2s pro .............
Click to expand...
Click to collapse
CWM Recovery for Alcatel Glory 2s Pro u will need:
1)Mobileuncle MTK Tools http://goo.gl/BjU5u
2)This file: http://goo.gl/wiY8o
Make sure your battery has some juice before doing this. Download the CWM file and put it to the root of the SD card. Download and run the Mobileuncle MTK tools
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Choose "Recovery update", and the first entry should be the .img file you have downloaded. Follow the steps, and you should have the English version of CWM available. The stock recovery (chinese TWRP, I believe) will be overwritten.
Notice 1: When you update another ROM, be sure to not update the recovery, as the CWM will be overwritten again.
Notice 2: Had tested this on Jiayu G4 and G3S, and since most MT6589 phones are based on the same SoC, I assume this will work with all MT6589 (mostly chinese) based phones on the market.Original sources from: http://forum.xda-developers.com/showthread.php?t=2357875#43435913

Noty Nick said:
CWM Recovery for Alcatel Glory 2s Pro u will need:
1)Mobileuncle MTK Tools http://goo.gl/BjU5u
2)This file: http://goo.gl/wiY8o
Make sure your battery has some juice before doing this. Download the CWM file and put it to the root of the SD card. Download and run the Mobileuncle MTK tools
Choose "Recovery update", and the first entry should be the .img file you have downloaded. Follow the steps, and you should have the English version of CWM available. The stock recovery (chinese TWRP, I believe) will be overwritten.
Notice 1: When you update another ROM, be sure to not update the recovery, as the CWM will be overwritten again.
Notice 2: Had tested this on Jiayu G4 and G3S, and since most MT6589 phones are based on the same SoC, I assume this will work with all MT6589 (mostly chinese) based phones on the market.Original sources from: http://forum.xda-developers.com/showthread.php?t=2357875#43435913
Click to expand...
Click to collapse
I tried it, but still no success. Alcatel OT Glory 2S Pro is MT6575 btw, not MT6589. I don't know if it's different, when I update it will boot into stock recovery.

kebiruan89 said:
I tried it, but still no success. Alcatel OT Glory 2S Pro is MT6575 btw, not MT6589. I don't know if it's different, when I update it will boot into stock recovery.
Click to expand...
Click to collapse
I think i might need your help.... i just bricked mine 4011X.... do u have Nandroid backup?

Noty Nick said:
I think i might need your help.... i just bricked mine 4011X.... do u have Nandroid backup?
Click to expand...
Click to collapse
Sorry I don't have it. Just download ONE TOUCH upgrade for TPOP from alcatel one touch official web.
I can't post the link. I don't know why.
Open zip, you will see 2 files, one is called "Mobile upgrade S4.0.2(for 4011) which is the correct one.
I unbricked my phone a week ago using this software and 100% works.

kebiruan89 said:
Sorry I don't have it. Just download ONE TOUCH upgrade for TPOP from alcatel one touch official web.
I can't post the link. I don't know why.
Open zip, you will see 2 files, one is called "Mobile upgrade S4.0.2(for 4011) which is the correct one.
I unbricked my phone a week ago using this software and 100% works.
Click to expand...
Click to collapse
i bricked my phone till no usb detected...

kebiruan89 said:
I tried it, but still no success. Alcatel OT Glory 2S Pro is MT6575 btw, not MT6589. I don't know if it's different, when I update it will boot into stock recovery.
Click to expand...
Click to collapse
i already try this Mobileuncle MTK Tools but still not working....when i try to boot CWM it still boot recovery only

ggiey said:
i already try this Mobileuncle MTK Tools but still not working....when i try to boot CWM it still boot recovery only
Click to expand...
Click to collapse
Yup, really hard to find which version is suitable for this phone.

Noty Nick said:
i bricked my phone till no usb detected...
Click to expand...
Click to collapse
Did you try using 'One Touch Upgrade' like I said? It still can detect your phone when it's off. Don't forget to install 'alcatel one touch manager' first for the driver. I think you have a same problem as me back then, but still managed to unbrick it using these softwares.

kebiruan89 said:
Did you try using 'One Touch Upgrade' like I said? It still can detect your phone when it's off. Don't forget to install 'alcatel one touch manager' first for the driver. I think you have a same problem as me back then, but still managed to unbrick it using these softwares.
Click to expand...
Click to collapse
cant unbrick also... its show out that my phone currently are running the latest updates.... but its ok... i send back to TenTen for warranty d... thanks by the way and i bought a new OT_4030D/ S-POP.... ~~

kebiruan89 said:
Sorry I don't have it. Just download ONE TOUCH upgrade for TPOP from alcatel one touch official web.
I can't post the link. I don't know why.
Open zip, you will see 2 files, one is called "Mobile upgrade S4.0.2(for 4011) which is the correct one.
I unbricked my phone a week ago using this software and 100% works.
Click to expand...
Click to collapse
are you download from here???
I'm using onetouch glory 2s pro 4011x

ggiey said:
i need cwm recory for alcatel ot glory2s pro .............
Click to expand...
Click to collapse
create cwm using mtk driod tool...........finally aku succes ........but i found a bug on it.............it's cannot create backup in mode cwm.....

Hi All,
to use mobileuncle u must root ur device 1st, then u only can replace/flash the CWM, u can use a same method to root ur phone by using 4010x. or u can use bin4ry method.. thanks

Alcatel glory 2s pro - 4011x
Root or unroot using VRoot_1.6.0 english.
Install PDANet (32bit or 64bit)
Phone: Copy recovery.img to data/local
PC: open flash cwm OTG 4011X folder.. run flash-it-> to install CWM
Then update superuser1.65.zip to replace the china one thru CWM.
File refer to "a d f. l y/Tw7C1"
CWM can only backup system, data but exclude "custpack" folder..
cwm not support that.. need to manually create custpack installer zip.
1.restore nandroid backup.
2.install custpackinstaller.zip
Thats my method for the time being..
Or..........
If using TWRP... download TWRP recovery for alcatel s'pop,
Using Mobile uncle tools not working but working as below:
-Phone: Copy TWRPrecovery.img to data/local, rename it to recovery.img
-PC: open flash cwm OTG 4011X folder.. run flash-it-> to install TWRP
Reboot recovery and backup your data include custpack folder..

kebiruan89 said:
Sorry I don't have it. Just download ONE TOUCH upgrade for TPOP from alcatel one touch official web.
I can't post the link. I don't know why.
Open zip, you will see 2 files, one is called "Mobile upgrade S4.0.2(for 4011) which is the correct one.
I unbricked my phone a week ago using this software and 100% works.
Click to expand...
Click to collapse
:laugh:Thank you so much.. I bricked my phone, keep google search but no solution, untill saw your posted. Help me much~~~:good::good::good:

alcatel one touch glory 2s pro 4011x
Hi, anyone can help me please?...Here is my problem, pass few day, I try to format my alcatel one touch glory 2s pro 4011x SD card from my laptop which connected to the mobile phone. In fact, I connected it through SD card but it was actually connected through internal storage of the phone and I didn't even realised about that. So, I format it but on the way formatting it, I accidentally shut down my laptop. Bad thing happened then, I can't power on my phone after that. Any luck on this case guys???

Hi guys, can you guys give me the recovery backup file (such as "update.zip" )for 4011x. Thanks

[CWM] [Root] Samsung Galaxy Star Pro Duos GT-S7262

ClockWorkMod 6.0 Touch Recovery​-First of all download the files- recovery.tar.zip & Odin3.07.zip,
-Unzip both the files,
-Flash recovery.tar via Odin 3.07 (As PDA)..
This recovery has been ported by me from Galaxy Star Duos..
Root​For Rooting Download the attached Superuser.zip file & flash it via Clockworkmod Recovery.

sahaj360 said:
Samsung Galaxy Star Pro Duos GT-S7262
Ported CWM 6.0 Touch Recovery​
-Download the attached recovery.tar.zip,
-Unzip it,
-Flash recovery.tar via Odin 3.07 (As PDA)..
It has been ported by me from galaxy star duos..
Click to expand...
Click to collapse
flashed via odin but not able to go into recovery

muddasir121 said:
flashed via odin but not able to go into recovery
Click to expand...
Click to collapse
Try adb reboot recovery you have to install adb and samsung drivers first i know its a bit of a hassel but its the best method ....

Try This
To boot into CWM recovery, turn off your phone complete, then turn it on by pressing and holding Volume Up + Volume Down + Home + Power Key, Let me know if it works or not

stil no recovery access
um009 said:
To boot into CWM recovery, turn off your phone complete, then turn it on by pressing and holding Volume Up + Volume Down + Home + Power Key, Let me know if it works or not
Click to expand...
Click to collapse
hello...
i did and follow the same steps as mention above.but stil i m booting in stock recovery no cwm acess.how can i flash cwm recovery..

sahaj360 said:
ClockWorkMod 6.0 Touch Recovery​-First of all download the files- recovery.tar.zip & Odin3.07.zip,
-Unzip both the files,
-Flash recovery.tar via Odin 3.07 (As PDA)..
This recovery has been ported by me from Galaxy Star Duos..
Root​For Rooting Download the attached Superuser.zip file & flash it via Clockworkmod Recovery.
Click to expand...
Click to collapse
Can I go back to stock recovery after the root without reflashing the stock rom through odin?
Or maybe can we have temporary recovery instead of permanent one?
Thanks

how to enter recovery manually?

not working for me..

k.d.s said:
not working for me..
Click to expand...
Click to collapse
check this thred ,try it and report . help us by reporting thanks
http://forum.xda-developers.com/showthread.php?p=52404464

vishal.ghodake said:
check this thred ,try it and report . help us by reporting thanks
http://forum.xda-developers.com/showthread.php?p=52404464
Click to expand...
Click to collapse
No cant try it now. cuz Already Rooted yesterday after much pain finally succeeded :good:

k.d.s said:
No cant try it now. cuz Already Rooted yesterday after much pain finally succeeded :good:
Click to expand...
Click to collapse
how you rooted star pro.......?
please share some details
your baseband version,kernal version,build no... setting > about
and your rooting guide ....i try to root my mobile more than one mongth no solution.
please help bro...

vishal.ghodake said:
how you rooted star pro.......?
please share some details
your baseband version,kernal version,build no... setting > about
and your rooting guide ....i try to root my mobile more than one mongth no solution.
please help bro...
Click to expand...
Click to collapse
For rooting please follow this link :
http://forum.xda-developers.com/showthread.php?t=2706644
...ROOTING...
First flash recovery.tar by odin
And i know, it cant go to recovery mode...
turn off the phone ,flash the boot which i attached below, via odin AS bootloader
and itself gone to recovery automatically , you can now install the superuser
Put superuser.zip in SDcard because it will not detect phone memory
Hope i Helped you Bro :good:
and i will post some screen too if i get chance. i just rooted my phone not install any custom Rom yet

k.d.s said:
For rooting please follow this link :
http://forum.xda-developers.com/showthread.php?t=2706644
...ROOTING...
First flash recovery.tar by odin
And i know, it cant go to recovery mode...
turn off the phone ,flash the boot which i attached below, via odin AS bootloader
and itself gone to recovery automatically , you can now install the superuser
Put superuser.zip in SDcard because it will not detect phone memory
Hope i Helped you Bro :good:
and i will post some screen too if i get chance. i just rooted my phone not install any custom Rom yet
Click to expand...
Click to collapse
thanks bro

vishal.ghodake said:
thanks bro
Click to expand...
Click to collapse
I checked no screen shot option here in this Phone but i clicked some pick from my S3 just to show you. some picks.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hope it help Bro
Enjoy Rooting

k.d.s said:
I checked no screen shot option here in this Phone but i clicked some pick from my S3 just to show you. some picks.
Hope it help Bro
Enjoy Rooting
Click to expand...
Click to collapse
thanks

I bought a new Samsung galaxy star pro s7262 but when I go to recovery mode I don't get the option '' install from sd card ''.. Please give me the solution of it...

sahaj360 said:
ClockWorkMod 6.0 Touch Recovery​-First of all download the files- recovery.tar.zip & Odin3.07.zip,
-Unzip both the files,
-Flash recovery.tar via Odin 3.07 (As PDA)..
This recovery has been ported by me from Galaxy Star Duos..
Root​For Rooting Download the attached Superuser.zip file & flash it via Clockworkmod Recovery.
Click to expand...
Click to collapse
my problem Is that my current version is xxuand2 and when I try to install cwm recovery on it my screen turns white while booting in recovery mode and I have aldo seen in many posts that reverting back to xxuaml4 rom creates a havock of entire white screen on the phone
so dude what to do now I think its impossible to root my galaxy star pro
NOTE:I have already rooted my phone with xxuaml4 rom but then due to installing chainfire 3d app I bricked my samsung galaxy star pro and ti unbrickit I had to install xxuand2 rom
si pls tell me now how to root it???

abhishekpandey.468 said:
my problem Is that my current version is xxuand2 and when I try to install cwm recovery on it my screen turns white while booting in recovery mode and I have aldo seen in many posts that reverting back to xxuaml4 rom creates a havock of entire white screen on the phone
so dude what to do now I think its impossible to root my galaxy star pro
NOTE:I have already rooted my phone with xxuaml4 rom but then due to installing chainfire 3d app I bricked my samsung galaxy star pro and ti unbrickit I had to install xxuand2 rom
si pls tell me now how to root it???
Click to expand...
Click to collapse
Follow instructions at end of this thread
http://forum.xda-developers.com/showthread.php?p=53940974

Were is the boot file brother, please attach again.

it work with samsung galaxy star plus DOUS ?? it desame with GT-7262 ?

[GUIDE] Lenovo S820 Viberom v1(1401) (CN/EN languagonly) 4.2.2 + Root + GAPPS workin

Guide to flash and root latest official Lenovo VIBEROM 1.0 r1401 (Jelly Bean 4.2.2) (CN/EN langauge only), with gapps+google play.
Note: This guide is for Chinese S820. Not tested on ROW 4GB/8GB version. All flash/modding voids warranty and is at your own risk.
1) Download Viberom v1 1401, cwm root zip including superuser, gapps, copy all to phone
(edit working with latest DEV version Viberom v1409)
Viberom v1 1401 (root and google play only works with latest 1401)
pub.ota.lenovomm.com/VIBEROM/DEV/DEV1401_2/VIBEROM_V1.0_1401_2_DEV_S820_NK.zip
superuser.zip attached on this post
GAPPS Google services and play for Jelly Bean 4.2.2 download from
goo.im/gapps/gapps-jb-20130812-signed.zip
2) Install CWM for s820 CN using SP flash tools
Check MT65xx preloader driver is installed. This device only appears for 2 seconds and disappears, when USB is plugged in when phone is off and battery/sim cards are out.
Open control panel,device manager, remove battery/sim cards, connect phone to usb, look for MT65xx preloader, if it appears in "other devices" quickly right click on it, and update driver. If you miss it, disconnect and reconnect USB. Find the appropriate driver for your OS in MT65xx preloader USB drivers.rar attached on this post. (Windows 7 driver works in Windows 8 as well)
If it appears in ports, driver is installed ok.
Disconnect phone from USB. Do not replace battery/sim cards.
Download and extract on your computer CWM_v6.0.3.4_S820_CN.7z - attached on this post
Download and extract SP Flash Tools - attached on this post
Run Flash_tool.exe with phone disconnected from USB.
Check "DA DL All With Check Sum" is ticked.
Press Scatter-loading, open "MT6589_Android_scatter_emmc.txt" from CWM archive. This will open recovery image in SP flash tools.
Press download button. Phone should still NOT be connected. You'll get a warning, Click Yes to still download anyway.
Now connect phone to USB with battery/sim cards still out.
Wait for success message. Disconnect phone. Insert sim cards/battery, replace back cover.
3) When phone is powered off, boot into CWM by holding down Volume Up, Volume Down, and Power buttons. When Lenovo logo appears, release power button but continue to hold down volume buttons. Release volume buttons when you get recovery menu. Should be headed "CWM-based Recovery v6......." if flash in step 2 was successful. If you get "Android system recovery", CWM flash was not successful. Go back.
Navigate up/down in menu using Vol up/down, and power button to select.
Select "wipe data/factory reset" and confirm.
Then "Install zip", then "choose zip from sdcard" or "choose zip from internal sdcard" depending where you saved the VIBEROM/superuser/gapps zip files.
Find VIBEROM zip, and confirm flash.
From main manu select install zip, select superuser.zip and confirm to flash.
Select Go Back to get back to main menu. Select reboot system now. You'll get a warning that recovery has been disabled, select YES to restore your recovery and the phone will reboot.
When phone has started up, you'll get a few superuser requests and notifications in chinese, just hit left button for each of them. You also get a request to switch language to English. Switch to English and connect to your wifi or cellular data as normal.
4) Now you can install GAPPS.
Power off phone, boot into CWM. Install Gapps zip. Reboot.
Might get a force close or two as google services updates, but everything will be ok after it updates itself.
You should now have rooted Viberom jelly bean 4.2.2 in English, with google services/google play. You can now freeze chinese apps or other unwanted bloatware using titanium pro or SD Maid, etc.

ROW 8GB
Could anyone please confirm with ROW 8GB version? I heard that we need to flash 8gb CN stock ROM to the international version(ROW) to convert it to CN base then only can flash custom, but I can't find the CN 8GB stock ROM...

new Viberom available 1403 DEV working with cwm root
pub.ota.lenovomm.com/VIBEROM/DEV/DEV1403/VIBEROM_V1.0_1403_3_DEV_S820_NK_6A1F.zip

8gb
Can't confirm if this will work with the international 8gb s820

Updated VibeROM
root working with VIBEROM_V1.0_1405_2_DEV_S820
download from viberom.com/xiazai_s820_nk.html

Hello. I' m having this problem when trying flash the CWM.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
When i open mtk droid it sayis:ATTENTION! Fake Hardware in kernel or firmware doesn't correspond to phone!
Hardware: MT6572 (MT6589 is Fake)
What should i do?

enea009 said:
Hello. I' m having this problem when trying flash the CWM.
View attachment 2558944
When i open mtk droid it sayis:ATTENTION! Fake Hardware in kernel or firmware doesn't correspond to phone!
Hardware: MT6572 (MT6589 is Fake)
What should i do?
Click to expand...
Click to collapse
Hi,
after this fake message i build a scartter with mtk tools. i tried with the CWM in this post and with the automatic one that mtk tools has. But in both cases sp flash tools gives me error 8038. I' dont know what to do at this point. I tried sp flash tool version 4, the version in this post and old one to. But allways same error. Can anyone help me? Is sp flash tool problem? Or because of fake hardware? Which CWM should i use? The procedure is done without battery. Should i put it on when flashing?

enea009 said:
Hello. I' m having this problem when trying flash the CWM.
View attachment 2558944
When i open mtk droid it sayis:ATTENTION! Fake Hardware in kernel or firmware doesn't correspond to phone!
Hardware: MT6572 (MT6589 is Fake)
What should i do?
Click to expand...
Click to collapse
s820 with MT6589 is not the fake version
gsmarena.com/lenovo_s820-5486.php
If you have mt6272 its a fake s820, you an't use the s820 cwm or viberom

danielwright said:
s820 with MT6589 is not the fake version
gsmarena.com/lenovo_s820-5486.php
If you have mt6272 its a fake s820, you an't use the s820 cwm or viberom
Click to expand...
Click to collapse
So you're telling that's nothing i can do for it?

enea009 said:
So you're telling that's nothing i can do for it?
Click to expand...
Click to collapse
If your phone has different hardware to the s820, I don't know of a way you can use CWM or ROMS designed for the s820

danielwright said:
If your phone has different hardware to the s820, I don't know of a way you can use CWM or ROMS designed for the s820
Click to expand...
Click to collapse
i understand this. but now i know that is MT6572. Any solution for this? what other informations i shuld give to find a solution?

enea009 said:
i understand this. but now i know that is MT6572. Any solution for this? what other informations i shuld give to find a solution?
Click to expand...
Click to collapse
I run Android System Info and in Buildinfos it says that Hardware is: MT6572 and in the CPU Hardware is: MT6589.
CPU-Z has all specifications as gsm arena. Hardware MT6589.
There's a way to be sure? How can i check the hardware version that is MT6572 or not?

enea009 said:
I run Android System Info and in Buildinfos it says that Hardware is: MT6572 and in the CPU Hardware is: MT6589.
CPU-Z has all specifications as gsm arena. Hardware MT6589.
There's a way to be sure? How can i check the hardware version that is MT6572 or not?
Click to expand...
Click to collapse
Hi,
I used SP FLash v5. I tried with MT6572 scatter and CWM_v6.0.3.4_S820_CN . Finished succesfuli. But when i pres power,up/down at the same time, nothing happens. So i resolved with MTK Droid. Sending the Reboot in Recovery mode from this app solved the problem. So i rooted my phone with the supersu zip. I'll try to install viberom now. Hope not to brake my phone.
---------- Post added at 07:34 PM ---------- Previous post was at 06:50 PM ----------
enea009 said:
Hi,
I used SP FLash v5. I tried with MT6572 scatter and CWM_v6.0.3.4_S820_CN . Finished succesfuli. But when i pres power,up/down at the same time, nothing happens. So i resolved with MTK Droid. Sending the Reboot in Recovery mode from this app solved the problem. So i rooted my phone with the supersu zip. I'll try to install viberom now. Hope not to brake my phone.
Click to expand...
Click to collapse
Well. The last request. Can anyone suggest what rom zip should i download now to update or upgrade? VIBEROM_V1.0_1405_2_DEV_S820 did not worked. It gives errors and cannot been installed.

Hello,
Does google play works with V1403 or 1405?

enea009 said:
Hi,
I used SP FLash v5. I tried with MT6572 scatter and CWM_v6.0.3.4_S820_CN . Finished succesfuli. But when i pres power,up/down at the same time, nothing happens. So i resolved with MTK Droid. Sending the Reboot in Recovery mode from this app solved the problem. So i rooted my phone with the supersu zip. I'll try to install viberom now. Hope not to brake my phone.
---------- Post added at 07:34 PM ---------- Previous post was at 06:50 PM ----------
Well. The last request. Can anyone suggest what rom zip should i download now to update or upgrade? VIBEROM_V1.0_1405_2_DEV_S820 did not worked. It gives errors and cannot been installed.
Click to expand...
Click to collapse
Looks like you have fake hardware, working fine on my s820 4GB

cariinfo said:
Hello,
Does google play works with V1403 or 1405?
Click to expand...
Click to collapse
Google play working on VIBEROM_V1.0_1405_2_DEV_S820

Recovery Menu Chinese or English?
Hello everyone!
Glad to find a thread related to my Lenovo S820 Could anyone please confirm if recovery menu after flashing CWM_v6.0.3.4_S820_CN.7z will be in Chinese or in English? Becasue the last time I tried the menu was in Chinese and couldn't understand nothing
Cheers,

lessismore8848 said:
Hello everyone!
Glad to find a thread related to my Lenovo S820 Could anyone please confirm if recovery menu after flashing CWM_v6.0.3.4_S820_CN.7z will be in Chinese or in English? Becasue the last time I tried the menu was in Chinese and couldn't understand nothing
Cheers,
Click to expand...
Click to collapse
Hi Lessismore8848,
CWM_v6.0.3.4_S820_CN.7z menus are in English

danielwright said:
root working with VIBEROM_V1.0_1405_2_DEV_S820
download from viberom.com/xiazai_s820_nk.html
Click to expand...
Click to collapse
which one to download:
VIBEROM_V1.0_1407_2_ST_S820 or VIBEROM_V1.0_1407_DEV_S820
What is the difference between these 2 roms?

cariinfo said:
which one to download:
VIBEROM_V1.0_1407_2_ST_S820 or VIBEROM_V1.0_1407_DEV_S820
What is the difference between these 2 roms?
Click to expand...
Click to collapse
ST is Stable version
DEV is Development version
Only seems to be more bloat in ST versions.
I've tested with latest version VIBEROM_V1.0_1407_DEV_S820 working well