My Motorola Xoom won't turn OFF and stuck on M logo. Please, can you help me ?
I assume battery drain has turned it off for you by now. In the future, pressing the power button and volume up at the same time should help.
LaserChicken said:
I assume battery drain has turned it off for you by now. In the future, pressing the power button and volume up at the same time should help.
Click to expand...
Click to collapse
My tablet is OFF only when the battery is empty, it is normal, but the same thing happens when you get the power back.
By pressing the power button and volume up at the same time, not helping me. Just a quick restart ...
Thanks !
Minolta2003 said:
My tablet is OFF only when the battery is empty, it is normal, but the same thing happens when you get the power back.
By pressing the power button and volume up at the same time, not helping me. Just a quick restart ...
Thanks !
Click to expand...
Click to collapse
Can you go to recovery?
superbay said:
Can you go to recovery?
Click to expand...
Click to collapse
Yes, in recovery menu I accessed WIPE DATA/FACTORY RESET and WIPE CACHE PARTITION
I tried to REBOOT without SD Card also
Nothing change !
Minolta2003 said:
Yes, in recovery menu I accessed WIPE DATA/FACTORY RESET and WIPE CACHE PARTITION
I tried to REBOOT without SD Card also
Nothing change !
Click to expand...
Click to collapse
As far as i know your Xoom might be romless. Try flashing any rom from your sdcard and lets see what happens
superbay said:
As far as i know your Xoom might be romless. Try flashing any rom from your sdcard and lets see what happens
Click to expand...
Click to collapse
Can you teach me how can I flash the rom through Fastboot because ADB is not recognized by the computer, cannot install MTP driver.
Minolta2003 said:
Can you teach me how can I flash through Fastboot because ADB is not recognized by the computer, cannot install MTP driver.
Click to expand...
Click to collapse
Im sorry i cant. Im not familiar with such way since flashing from sdcard is more simple for me. Computer not recognizing device because of MTP driver is known for common issue though. Dont you want to try flashing from sdcard? Its easier if one is present.
superbay said:
Im sorry i cant. Im not familiar with such way since flashing from sdcard is more simple for me. Computer not recognizing device because of MTP driver is known for common issue though. Dont you want to try flashing from sdcard? Its easier if one is present.
Click to expand...
Click to collapse
Yes, shure, the sdcard is present, and I want to know how to do this, step by step. Thank you !
Minolta2003 said:
Yes, shure, the sdcard is present, and I want to know how to do this, step by step. Thank you !
Click to expand...
Click to collapse
Just copy the rom and gapps to the sdcard and simply flash them from the recovery. Or if you want to update the revovery, you can also put it in the sdcard and flash it before you flash the rom. Wipe cache lastly
superbay said:
Just copy the rom and gapps to the sdcard and simply flash them from the recovery. Or if you want to update the revovery, you can also put it in the sdcard and flash it before you flash the rom. Wipe cache lastly
Click to expand...
Click to collapse
This is my recovery menu:
Android System Recovery <3e>
reboot system now
apply update from USB drive
wipe data/factory reset
wipe cache partition
1. Please tell me how can copy files, flash or update from recovery with this options ?
2. You know the download links for rom, gapps and update files ?
Thanks !
Minolta2003 said:
This is my recovery menu:
Android System Recovery <3e>
reboot system now
apply update from USB drive
wipe data/factory reset
wipe cache partition
1. Please tell me how can copy files, flash or update from recovery with this options ?
2. You know the download links for rom, gapps and update files ?
Thanks !
Click to expand...
Click to collapse
Gee so sorry. I thought you have custom recovery like cwm or twrp. Apparently you still have stock recovery there. So i guess you need to download the stock image for your Xoom and, yes you are correct, flash them from fastboot then. Long long time ago, i ever did this but i dont really remember all things. But all i know is that I followed steps from here http://androidforums.com/xoom-all-things-root/653230-return-your-xoom-stock.html. Pay attention for post #37 since all commands i applied are from there. If you need different version of image, you can try looking which fits yours here http://forum.xda-developers.com/showthread.php?t=1049485. As i told you before, ive done this long time ago so i dont remember what i did at that time but i succeeded by following the steps. However, im here to help you as far as i can. Keep me updated with your process there
superbay said:
Gee so sorry. I thought you have custom recovery like cwm or twrp. Apparently you still have stock recovery there. So i guess you need to download the stock image for your Xoom and, yes you are correct, flash them from fastboot then. Long long time ago, i ever did this but i dont really remember all things. But all i know is that I followed steps from here http://androidforums.com/xoom-all-things-root/653230-return-your-xoom-stock.html. Pay attention for post #37 since all commands i applied are from there. If you need different version of image, you can try looking which fits yours here http://forum.xda-developers.com/showthread.php?t=1049485. As i told you before, ive done this long time ago so i dont remember what i did at that time but i succeeded by following the steps. However, im here to help you as far as i can. Keep me updated with your process there
Click to expand...
Click to collapse
Your advice was definitely the solution, but I did not get to do anything because my Xoom is stuck in black screen and cannot power it on
I do not know the cause. It's incredible what happens !
Suddenly started to reboot itself, then stopped completely. It was only connected to the original charger and USB, ready for install drivers and flash.
The power led is ok (white and green, after few minutes) I removed the battery, the voltage is correct, and nothing ...
Do you have any idea?
Minolta2003 said:
Your advice was definitely the solution, but I did not get to do anything because my Xoom is stuck in black screen and cannot power it on
I do not know the cause. It's incredible what happens !
Suddenly started to reboot itself, then stopped completely. It was only connected to the original charger and USB, ready for install drivers and flash.
The power led is ok (white and green, after few minutes) I removed the battery, the voltage is correct, and nothing ...
Do you have any idea?
Click to expand...
Click to collapse
Well that's new for me. Did you have that after you do the whole process? when did you get the black screen? Cant go to fastboot either?
How are you charging? wall charger how long? Which Xoom do you have?
Sent from my Motorola Galaxy s3 using xda app-developers app
superbay said:
Well that's new for me. Did you have that after you do the whole process? when did you get the black screen? Cant go to fastboot either?
Click to expand...
Click to collapse
No, before, when my tablet was with my initial problem (Won't turn OFF and stuck on M logo).
Suddenly it started to reboot itself and stuck each time at M logo, then stopped completely, after 4-5 cycles.
During this time, I followed the steps in this link till the point 6 (reboot your computer, plug in your Xoom and allow the drivers to install), with WiFi Xoom Restore downloaded files.
Black screen, no fastboot, no android recovery, nothing, just a green light when charging with original wall charger (SPN5632B)
Chadwick108 said:
How are you charging? wall charger how long? Which Xoom do you have?
Sent from my Motorola Galaxy s3 using xda app-developers app
Click to expand...
Click to collapse
With Original Motorola Wall Charger SPN5632B, no long time because my tablet was almost always connected to the charger.
The battery has 8 volts and charger 12 volts.
If I disconnect the charger and hook it back, the white light stay bright about 10 minutes, then turns green.
Motorola XOOM Wi-Fi - MZ604
From what I remember, last days when charging, the Xoom jacks area was warm, now is cold. Maybe it is normal to be cold if the tablet is fully charged now, I don`t know exactly if this is a good indication for helping me...
Minolta2003 said:
No, before, when my tablet was with my initial problem (Won't turn OFF and stuck on M logo).
Suddenly it started to reboot itself and stuck each time at M logo, then stopped completely, after 4-5 cycles.
During this time, I followed the steps in this link till the point 6 (reboot your computer, plug in your Xoom and allow the drivers to install), with WiFi Xoom Restore downloaded files.
Black screen, no fastboot, no android recovery, nothing, just a green light when charging with original wall charger (SPN5632B)
Click to expand...
Click to collapse
Green light indicates that the battery is full. Your case is not an ordinary one though. What happens if you press volume up+power button? Does it even boot? At least to the fastboot?
Anyway, previously you said that you removed the battery. Did you tear up your Xoom?
superbay said:
Green light indicates that the battery is full. Your case is not an ordinary one though. What happens if you press volume up+power button? Does it even boot? At least to the fastboot?
Anyway, previously you said that you removed the battery. Did you tear up your Xoom?
Click to expand...
Click to collapse
Yes, it is very difficult to understand what happened in this case. No logo, no boot, no fastboot, is power off
Now (Volume up + Power) = Nothing, same black screen
Before (Volume up + Power) = Reset
Yes, I tear up my Xoom
Minolta2003 said:
Yes, it is very difficult to understand what happened in this case. No logo, no boot, no fastboot, is power off
Now (Volume up + Power) = Nothing, same black screen
Before (Volume up + Power) = Reset
Yes, I tear up my Xoom
Click to expand...
Click to collapse
Im afraid i could not give you further suggestion other than removing sdcard and trying booting it up again with any means or keep pressing the volume up+power button for at least a minute. If it doesnt give you any good, well then sorry im done by this point.
Any history about the tablet? The one that pushed you to tear up the device maybe? What happened before the tablet's gone weird?
Hi there...it was mere some hours after i got my new moto g...i installed next launcher and pressed "always" instead of "just once" as i pressed the home button. The phone restarted immidiately and is stuck at logo screen forever. Now i tried flashing stock rom through fast boot method but the process gets stuck at "waiting for device" at the first command. That might be because USB debugging is disabled and i can't enable it as the phone doesn't show up anything. i checked the drivers several times but didn't work out.
The link of the guide is http://forum.xda-developers.com/showthread.php?t=2542219
anyone??
try to download stock room with final is ".tar.gz" and do the first method... worked for me... my devices is xt1033
.xml.zip don't work to me
usernam215 said:
Hi there...it was mere some hours after i got my new moto g...i installed next launcher and pressed "always" instead of "just once" as i pressed the home button. The phone restarted immidiately and is stuck at logo screen forever. Now i tried flashing stock rom through fast boot method but the process gets stuck at "waiting for device" at the first command. That might be because USB debugging is disabled and i can't enable it as the phone doesn't show up anything. i checked the drivers several times but didn't work out.
The link of the guide is http://forum.xda-developers.com/showthread.php?t=2542219
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=LoTAsuPey_E
strange is my phone...i get in the fastboot mode as shown in the video. But after selecting recovery, i don't see ANY option. all i can see android laid on its back...as it in recovery mode. How is it possible???
usernam215 said:
strange is my phone...i get in the fastboot mode as shown in the video. But after selecting recovery, i don't see ANY option. all i can see android laid on its back...as it in recovery mode. How is it possible???
Click to expand...
Click to collapse
If your bootloader is unlocked you could use fastboot to fastboot flash a recovery. Then do a factory reset.
usernam215 said:
strange is my phone...i get in the fastboot mode as shown in the video. But after selecting recovery, i don't see ANY option. all i can see android laid on its back...as it in recovery mode. How is it possible???
Click to expand...
Click to collapse
in kitkat recovery has been changed and options in recovery will be shown only when u press power and volume up for 4 sec and releasing both when u reach the android laid on its back screen
dnana_28 said:
in kitkat recovery has been changed and options in recovery will be shown only when u press power and volume up for 4 sec and releasing both when u reach the android laid on its back screen
Click to expand...
Click to collapse
:good::good:thanx man..
usernam215 said:
:good::good:thanx man..
Click to expand...
Click to collapse
You should hit the thanks button instead of posting it
Sent from my XT1032 using Tapatalk
Hi Guys,
So the story is that I was updating my Xperia Z3 (details below) from TWRP 2.8.6 to 'twrp-3.0.2-0-yuga' using the instructions androidnewsbox.com/2016/02/08/how-to-install-and-update-to-twrp-3-0-0 and after flashing the new TWRP the phone can no longer enter recovery mode and I get no other booting/loading screens.
I had 100% battery when I started the process.
It does still do the little vibrate thing when I hold down the power button but nothing happens after that.
When I plug it into the PC the LED flashes red, then green then goes off.
Reading the instructions twrp.me/devices/sonyxperiaz.html I did use the 'install' function not the 'recovery' function. Is that likely to be the mistake I made? If so is there any way to recover?
Any and all help will be greatly appreciated.
Model: D6653
Previous TWRP: 2.8.6
Android version: 5.0.2
Software version: 23.1.A.0.726
Use flashtool to reflash a new system image (ftf). You're using stock so probably your kernel doesn't support FOTA-Kernel partition flashing.
Great to hear back from someone.
Unfortunately I don't think that I can just flash a new ftf using flashtool as I cant get into fastboot mode.
I have been working through the following online tutorial
engineerthink.com/blog/2015/11/how-to-unbrick-hard-bricked-android-phone/
I have installed the USB drivers on my PC from here
androidmtk.com/download-sony-xperia-usb-driver
And i can get the ftf file from here (mine is 1288-6090)
xpericheck.com/device/D6653
Unfortunately I am unable to put the phone into fastboot mode by holding down the power and down buttons. Nothing happens.
The tutorial above also tells me "If phone not going to Fastboot mode than connect it to PC by USB. Hold Volume Up and Power button until you get company logo or backlight."
This also does nothing and I get no backlight or company logo.
FYI if it helps about a year ago I rooted my phone using a tutorial very similar to this
oneandroid.gs/root-xperia-z3/
I will keep working on the problem and post any updates as they come up.
h3llcat said:
Great to hear back from someone.
Unfortunately I don't think that I can just flash a new ftf using flashtool as I cant get into fastboot mode.
I have been working through the following online tutorial
engineerthink.com/blog/2015/11/how-to-unbrick-hard-bricked-android-phone/
I have installed the USB drivers on my PC from here
androidmtk.com/download-sony-xperia-usb-driver
And i can get the ftf file from here (mine is 1288-6090)
xpericheck.com/device/D6653
Unfortunately I am unable to put the phone into fastboot mode by holding down the power and down buttons. Nothing happens.
The tutorial above also tells me "If phone not going to Fastboot mode than connect it to PC by USB. Hold Volume Up and Power button until you get company logo or backlight."
This also does nothing and I get no backlight or company logo.
FYI if it helps about a year ago I rooted my phone using a tutorial very similar to this
oneandroid.gs/root-xperia-z3/
I will keep working on the problem and post any updates as they come up.
Click to expand...
Click to collapse
First hard shut down your phone by using combo, after that, download the ftf for your phone (1288-6090 is the customization, what you need is an ftf that its compatible with your phone model, download flash tools, install the drivers that come with it, and using xperifirm (Included in flashtools) you download the firmware) After you have all settled up, proceed to flash your phone, select firmware and then it'll ask you to connect your phone in flash mode not fastboot mode, you can do that by pressing vol up + power (press them and while pressing them connect the usb to the pc). Then the flashing process will start. You can find many tutorials around here in xda. Do not use external tutorials, go find stuff here. It's way more reliable as many are made just for your phone.
Hi and thanks again.
This gives me plenty to learn about and go forward with thanks heaps.
I will give this process a go later today but I have a few questions if you dont mind.
hard shut down your phone by using combo
Click to expand...
Click to collapse
I am not familiar with any combo and without visual ques from the screen or LED I cant tell if it is off. I have a button that says 'off' near the sim card is that sufficient?
connect your phone in flash mode not fastboot mode, you can do that by pressing vol up + power
Click to expand...
Click to collapse
Do I need to continue to hold down the buttons during the flashing process?
You can find many tutorials around here in xda
Click to expand...
Click to collapse
I do feel a little out of my depth here and am a bit confused about what to even search for to find a tutorial on what you are suggesting. If you can point me to an example tutorial that would be fantastic.
h3llcat said:
I am not familiar with any combo and without visual ques from the screen or LED I cant tell if it is off. I have a button that says 'off' near the sim card is that sufficient?
Click to expand...
Click to collapse
Yes that one, If you press it enough (about 5-10 secs) the phone will shutdown and It wont try to restart. This is what you need first.
h3llcat said:
Do I need to continue to hold down the buttons during the flashing process?
Click to expand...
Click to collapse
No, only when connecting the phone to start flashing the system software, you will see a green light in the notification led that will then shut off and flashing process will start.
h3llcat said:
I do feel a little out of my depth here and am a bit confused about what to even search for to find a tutorial on what you are suggesting. If you can point me to an example tutorial that would be fantastic.
Click to expand...
Click to collapse
This is a great almost-up-to-date guide http://www.xperiablog.net/2015/03/1...peria-lollipop-using-xperifirm-and-flashtool/
XperiFirm is included in flashtools now so you don't have to download it, but to get your firmware you have to do the same steps but opening xperifirm from inside flashtool.
You can download flashtool here http://www.flashtool.net/downloads.php
Seems to be a success!
Thanks heaps for all your great assistance.
Did you get the Z3 D6653 going again?
Hi H3llcat,
Jumping through some hoops with the D6653 myself... did you get it to boot up? Not sure how far you went with it, if still an issue charge it back up and let's try a couple of things; I realize it'll just be sitting there all dumb and dark like, but do it anyway. So let us know.
h3llcat said:
Hi Guys,
So the story is that I was updating my Xperia Z3 (details below) from TWRP 2.8.6 to 'twrp-3.0.2-0-yuga' using the instructions androidnewsbox.com/2016/02/08/how-to-install-and-update-to-twrp-3-0-0 and after flashing the new TWRP the phone can no longer enter recovery mode and I get no other booting/loading screens.
I had 100% battery when I started the process.
It does still do the little vibrate thing when I hold down the power button but nothing happens after that.
When I plug it into the PC the LED flashes red, then green then goes off.
Reading the instructions twrp.me/devices/sonyxperiaz.html I did use the 'install' function not the 'recovery' function. Is that likely to be the mistake I made? If so is there any way to recover?
Any and all help will be greatly appreciated.
Model: D6653
Previous TWRP: 2.8.6
Android version: 5.0.2
Software version: 23.1.A.0.726
Click to expand...
Click to collapse
Not sure if this is worth mentioning but this thread is 2 years old.
Yes I did get everything working, xkeita was a great help and the guide he sent me was useful.
Have you got issues yourself?
First, I was doing a full wipe in TWRP, But I realize I didn't back up my photos/Documents.
So I long pressed the power button to restart.
And now, i got a bricked phone...
Any one can help me?
I'd try this
https://forum.xda-developers.com/huawei-p20/how-to/how-to-how-to-unbrick-clt-l29c432-t3878714
But, I got stuck on the TWRP boot screen.
Also, I'm still available to use the fastboot mode.
Finally, I solve the problem by flashing the e recovery image,and then low level forma data.
Hope it helps for someone have the same issue like me.
zhu911203 said:
First, I was doing a full wipe in TWRP, But I realize I didn't back up my photos/Documents.
So I long pressed the power button to restart.
And now, i got a bricked phone...
Click to expand...
Click to collapse
I have exactly the same Problem. Did you solve it already?
zhu911203 said:
First, I was doing a full wipe in TWRP, But I realize I didn't back up my photos/Documents.
So I long pressed the power button to restart.
And now, i got a bricked phone...
Any one can help me?
I'd try this
https://forum.xda-developers.com/huawei-p20/how-to/how-to-how-to-unbrick-clt-l29c432-t3878714
But, I got stuck on the TWRP boot screen.
Also, I'm still available to use the fastboot mode.
Click to expand...
Click to collapse
Can you still have access to erecovery : volup at power with USB cable plugged. If yes you can try a recovery but you will loose all your data
Can you have access to fastboot : vol down at power up. If yes you can try to flash by adb by following instruction from discussions in the forums.
zhu911203 said:
First, I was doing a full wipe in TWRP, But I realize I didn't back up my photos/Documents.
So I long pressed the power button to restart.
And now, i got a bricked phone...
Any one can help me?
I'd try this
https://forum.xda-developers.com/huawei-p20/how-to/how-to-how-to-unbrick-clt-l29c432-t3878714
But, I got stuck on the TWRP boot screen.
Also, I'm still available to use the fastboot mode.
Click to expand...
Click to collapse
Can you still have access to erecovery : volup at power with USB cable plugged. If yes you can try a recovery but you will loose all your data
Can you have access to fastboot : vol down at power up. If yes you can try to flash by adb by following instruction from discussions in the forums.
Schuchi said:
I have exactly the same Problem. Did you solve it already?
Click to expand...
Click to collapse
yes, I solved the problem, hope it will help you.
hello everybody
I NEED YOUR HELP.
MY ONEPLUS 7 WAS ROOTED WITH TWPR.
I TRIED TO DO OTA UPDATE TO 10.0.3, AND NOW I AM IN situation THAT I CAN ONLY MOVE FROM RECOBERY MODE TO START, OR RESTART BOOTLOADER, OR POWER OFF, without ability TO GET INTO ONE OF THEM.
I WHANT TO GET INTO BOOTLOADER, BUT WHEN I GET INTO THAT option FROM THE VOLUM AND PRESS THE RIGHT button, IT JUMP INTO START.
exactly THE SAME HAPPEN WHEN I TRY TO GET INTO RECOVERY. IT DOESNT GET INTO RECOVERY AND JUMP INTO THE NEXT OPTION.
WHEN I CHOOSE POWER OFF THE SCREEN BECOME BLACK BUT THE PHONE DONT SHUT OFF.
PLEASE HELP ME.
THANKS.
SHARONDV said:
hello everybody
I NEED YOUR HELP.
MY ONEPLUS 7 WAS ROOTED WITH TWPR.
I TRIED TO DO OTA UPDATE TO 10.0.3, AND NOW I AM IN situation THAT I CAN ONLY MOVE FROM RECOBERY MODE TO START, OR RESTART BOOTLOADER, OR POWER OFF, without ability TO GET INTO ONE OF THEM.
I WHANT TO GET INTO BOOTLOADER, BUT WHEN I GET INTO THAT option FROM THE VOLUM AND PRESS THE RIGHT button, IT JUMP INTO START.
exactly THE SAME HAPPEN WHEN I TRY TO GET INTO RECOVERY. IT DOESNT GET INTO RECOVERY AND JUMP INTO THE NEXT OPTION.
WHEN I CHOOSE POWER OFF THE SCREEN BECOME BLACK BUT THE PHONE DONT SHUT OFF.
PLEASE HELP ME.
THANKS.
Click to expand...
Click to collapse
Hello, is your device recognized by your PC? Are you able to issue the command for rebooting bootloader?did you followed this guide: https://forum.xda-developers.com/oneplus-7/how-to/guide-unlock-bootloader-flash-twrp-root-t3954559 ?
strongst said:
Hello, is your device recognized by your PC? Are you able to issue the command for rebooting bootloader?did you followed this guide: https://forum.xda-developers.com/oneplus-7/how-to/guide-unlock-bootloader-flash-twrp-root-t3954559 ?
Click to expand...
Click to collapse
THANKS FOR YOUR ANSWER
I managed TO FLASH ROM WITH ALL IN ONE TOOL.
THANKS AGAIN.
SHARONDV said:
THANKS FOR YOUR ANSWER
I managed TO FLASH ROM WITH ALL IN ONE TOOL.
THANKS AGAIN.
Click to expand...
Click to collapse
Ιf anyone helped you,especially if he is the author (and Moderator also) you can press the button "Thanks" instead of writing thank you
believe me it is much better