[Solved] P20 Pro Bricked... Anyone can help me? - Huawei P20 Pro Guides, News, & Discussion

First, I was doing a full wipe in TWRP, But I realize I didn't back up my photos/Documents.
So I long pressed the power button to restart.
And now, i got a bricked phone...
Any one can help me?
I'd try this
https://forum.xda-developers.com/huawei-p20/how-to/how-to-how-to-unbrick-clt-l29c432-t3878714
But, I got stuck on the TWRP boot screen.
Also, I'm still available to use the fastboot mode.
Finally, I solve the problem by flashing the e recovery image,and then low level forma data.
Hope it helps for someone have the same issue like me.

zhu911203 said:
First, I was doing a full wipe in TWRP, But I realize I didn't back up my photos/Documents.
So I long pressed the power button to restart.
And now, i got a bricked phone...
Click to expand...
Click to collapse
I have exactly the same Problem. Did you solve it already?

zhu911203 said:
First, I was doing a full wipe in TWRP, But I realize I didn't back up my photos/Documents.
So I long pressed the power button to restart.
And now, i got a bricked phone...
Any one can help me?
I'd try this
https://forum.xda-developers.com/huawei-p20/how-to/how-to-how-to-unbrick-clt-l29c432-t3878714
But, I got stuck on the TWRP boot screen.
Also, I'm still available to use the fastboot mode.
Click to expand...
Click to collapse
Can you still have access to erecovery : volup at power with USB cable plugged. If yes you can try a recovery but you will loose all your data
Can you have access to fastboot : vol down at power up. If yes you can try to flash by adb by following instruction from discussions in the forums.

zhu911203 said:
First, I was doing a full wipe in TWRP, But I realize I didn't back up my photos/Documents.
So I long pressed the power button to restart.
And now, i got a bricked phone...
Any one can help me?
I'd try this
https://forum.xda-developers.com/huawei-p20/how-to/how-to-how-to-unbrick-clt-l29c432-t3878714
But, I got stuck on the TWRP boot screen.
Also, I'm still available to use the fastboot mode.
Click to expand...
Click to collapse
Can you still have access to erecovery : volup at power with USB cable plugged. If yes you can try a recovery but you will loose all your data
Can you have access to fastboot : vol down at power up. If yes you can try to flash by adb by following instruction from discussions in the forums.

Schuchi said:
I have exactly the same Problem. Did you solve it already?
Click to expand...
Click to collapse
yes, I solved the problem, hope it will help you.

Related

xt1032 BootLoop (Android starting..) can't enter recovery or bootloader.

Hi everyone im stuck on the resurection of my device (moto g 2013 8GB updated to 5.1 with [5.1 GPE 1 click] from This forum.
I've tried everything or almost for now, cant get it out of that loop.
*Battery pulling.
*hard buttons combinations.
*fastboot and ADB. (not in fastboot mode so.. And as i did flash de 1click before the loop USB Dbgn isn't enabled)
*i think i've tried every toolkit on this forum.
*Raped google search for over a week trying every posible method-
*Only thing left is to take it to church for a blessing. but im not a believer D:
ADD: i've rooted with a "boot.img" from this forum i think it was a 2015 file.
before this i had not 1 issue with the phone. just unlockd the bootloader a few days ago and updated to 5.1 from 5.0.2 becouse of a wifi issue (unknow mac adress) i had to reboot it like 10 times until it appeared again (original mac adress from device, still wrote it down i have it somewhere.)
I think this would be my first post on this forum and it took me over a week to do it becouse this (asking you-comunity) is my last resource.
PS: i had it going betwen 5.0.2 and 5.1 like 4 times to try solving the wifi issue.. only thing it got me was the "line" on the screen like if it where a problem with vertical sync. (i think you are all very familiar with that issue after downgrading the kernel i think.)
the phone just turns it self on everytime. (everytime)
i was able to boot into recovery before the last flash touching the place were the hardware volume button goes (with a neddle) untill it didnt workd anymore and i send it to a store to repair the volume rockers. still no recovery or bootloader boot.
my pc (laptop with 7-32bit recognices it as xt1032. and the one with xp as MTP.)
I've installed every posible thing that i found to bring it back to life even the android sdk full every pkg from 5.0.2 to 5.1 and extras, Motorola drivers and ADB. tried online searching automated from windows and listing it from a folder with the google one. tried adding the hardware manualy and have every ADB thing that i found on device mng but everyone is wit a yellow triangle. (No USB Debuging enabled so why bother anymore.)
I think that's about it.
You seem to be making things massively over-complicated.
Flash latest TWRP from here: http://forum.xda-developers.com/moto-g/development/recovery-twrp-2-8-2-0-touch-recovery-t2980621
Example fastboot command:
fastboot flash recovery twrp.img​
If you cannot enter TWRP, use ONLY this fastboot command:
fastboot erase userdata​
Via TWRP, flash latest GPE Optimized ROM from here: http://forum.xda-developers.com/moto-g/development/rom-stock-motorola-lollipop-rom-t3017510
i m sorry for my english, isnt my native lang. And for making it over complicated.
i cant enter fastboot mode or give any order to the phone trough fastboot on a console.
I have installed a TWRP touch, just cant acces it. dont know if it is the hardware button (Vol -) or what.
so it dosnt show up on fastboot devices nor adb devices.
am i not understanding something ?
Thanks for replying and taking the time to help!
Enter fastboot mode by turning on phone while holding Volume Down.
lost101 said:
Enter fastboot mode by turning on phone while holding Volume Down.
Click to expand...
Click to collapse
tried again just in case. No luck, wont boot into recovery or bootloader mode. vol (-) or power and vol (-)
it just "tries" to boot up normaly and gets stuck on "android starting" untill "initializing apps" 4 colours flying and reboots again.
dieguitwow1 said:
tried again just in case. No luck, wont boot into recovery or bootloader mode. vol (-) or power and vol (-)
it just "tries" to boot up normaly and gets stuck on "android starting" untill "initializing apps" 4 colours flying and reboots again.
Click to expand...
Click to collapse
If the volume rocker is not broken, then you should be able to enter fastboot mode. Hold power button until phone turns off completely.
If the volume rocker is not broken, then you should be able to enter fastboot mode. Hold power button until phone turns off completely.
Click to expand...
Click to collapse
did that, tried pulling the battery off and holding the keys (down and power or just vol down) and starting it. no way it goes into bootloader or recovery. When i do any of those things the phone just powers back up it self and boots into system or tries to, and get stuck in bootloop.
Im gonna try a gtag cable or something like that tomorrow from a friend. would it work to send it to bootloader or recovr?
dieguitwow1 said:
did that, tried pulling the battery off and holding the keys (down and power or just vol down) and starting it. no way it goes into bootloader or recovery. When i do any of those things the phone just powers back up it self and boots into system or tries to, and get stuck in bootloop.
Im gonna try a gtag cable or something like that tomorrow from a friend. would it work to send it to bootloader or recovr?
Click to expand...
Click to collapse
You said you had the volume rocker repaired - but it seems at least, vol down is not working. I have no experience with jtag kits or commands.
lost101 said:
You seem to be making things massively over-complicated.
Flash latest TWRP from here: http://forum.xda-developers.com/moto-g/development/recovery-twrp-2-8-2-0-touch-recovery-t2980621
Example fastboot command:
fastboot flash recovery twrp.img​
If you cannot enter TWRP, use ONLY this fastboot command:
fastboot erase userdata​
Via TWRP, flash latest GPE Optimized ROM from here: http://forum.xda-developers.com/moto-g/development/rom-stock-motorola-lollipop-rom-t3017510
Click to expand...
Click to collapse
lost101 said:
Enter fastboot mode by turning on phone while holding Volume Down.
Click to expand...
Click to collapse
lost101 said:
You said you had the volume rocker repaired - but it seems at least, vol down is not working. I have no experience with jtag kits or commands.
Click to expand...
Click to collapse
i think it's not repaired properly, or the last time i flashed it fastboot might have send a command like "fastboot normalboot" or something like that. Would that be stoping me from entering recovery mode or fastboot?
dieguitwow1 said:
i think it's not repaired properly, or the last time i flashed it fastboot might have send a command like "fastboot normalboot" or something like that. Would that be stoping me from entering recovery mode or fastboot?
Click to expand...
Click to collapse
If you power phone off completely, then no commands are remembered. The button is broken.
lost101 said:
If you power phone off completely, then no commands are remembered. The button is broken.
Click to expand...
Click to collapse
Thanks! so, what should i do now? is there any way to fix it or bypass it ?
i was "touching" the button with a niddle until it stoped working is there a fix for it? :fingers-crossed:
dieguitwow1 said:
Thanks! so, what should i do now? is there any way to fix it or bypass it ?
i was "touching" the button with a needle until it stopped working is there a fix for it? :fingers-crossed:
Click to expand...
Click to collapse
Sorry, I can't help you with that. If you know someone good with a soldering iron, maybe they can fix it - otherwise, try another repair shop.
its still seen by my PC with XP. As xt1032 on the bootloop can i do something ? moto device mngr starts with de Moto logo on the sys tray..
dieguitwow1 said:
its still seen by my PC with XP. As xt1032 on the bootloop can i do something ? moto device mngr starts with de Moto logo on the sys tray..
Click to expand...
Click to collapse
adb reboot bootloader​
lost101 said:
adb reboot bootloader​
Click to expand...
Click to collapse
even if "USB Debuging" isn't enabled?
Edit: Result= [ Error: device ´<null>´ not found ]
dieguitwow1 said:
even if "USB Debuging" isn't enabled?
Edit: Result= [ Error: device ´<null>´ not found ]
Click to expand...
Click to collapse
Yes, USB Debugging would need to be enabled.
lost101 said:
Yes, USB Debugging would need to be enabled.
Click to expand...
Click to collapse
so, apart from taking it to repair again for the button, what can i do?:fingers-crossed:
dieguitwow1 said:
so, apart from taking it to repair again for the button, what can i do?:fingers-crossed:
Click to expand...
Click to collapse
I am not aware of any other options.
i managed to recover the phone it works normaly but screen goes off and on all the time, every 5 sec. Except on Bootloader Mode.
dieguitwow1 said:
i managed to recover the phone it works normaly but screen goes off and on all the time, every 5 sec. Except on Bootloader Mode.
Click to expand...
Click to collapse
What has changed? Did you get the vol button fixed?

hard bricked my MT-TL10

Hi there,
Kindly help... I successfully installed B512 on my TL10 using force upgrade method, afterwhich I changed recovery to TWRP 3.0.2 using mobopx v2.2, which was also successful. And then I installed SuperSU 2.46 via TWRP, then cleared cache/dalvik. But upon rebooting system, I get a blank screen, even after waiting for more than 15 minutes.
And so I tried going to TWRP (Vol+ and power), which was successful, in order to boot to bootloader, with the intention of loading back the stock bootloader via adb, so that I can force install B512 from my microSD card again. It seemed to install fine...
However, at this point, I cannot reboot to bootloader (Vol- and power) anymore, I only get blank screen. Trying recovery (Vol+ and power) doesn't work either. Rebooting normally gives me the same. I cannot by any means connect via adb now.
Is there any way to unbrick my phone at this point?
Thanks so much. Cheers.
Works entrance for the recovery (Vol+ and Vol- and Power)?
rakrakrak said:
Works entrance for the recovery (Vol+ and Vol- and Power)?
Click to expand...
Click to collapse
No bro...
eusagc said:
However, at this point, I cannot reboot to bootloader (Vol- and power) anymore, I only get blank screen. Trying recovery (Vol+ and power) doesn't work either. Rebooting normally gives me the same. I cannot by any means connect via adb now.
Click to expand...
Click to collapse
What happens when you do a Vol up + power?
CloudCompute said:
What happens when you do a Vol up + power?[/QU
The phone "doesn't want to turn off" bro. It has fully discharged, but as soon as I plug the charger in, it immediately powers up. When it does, now it shows the Huawei logo. But it's stuck there, and if I press the power button for a few secs, it will power down, but immediately power up again...
Click to expand...
Click to collapse
eusagc said:
CloudCompute said:
What happens when you do a Vol up + power?[/QU
The phone "doesn't want to turn off" bro. It has fully discharged, but as soon as I plug the charger in, it immediately powers up. When it does, now it shows the Huawei logo. But it's stuck there, and if I press the power button for a few secs, it will power down, but immediately power up again...
Click to expand...
Click to collapse
Let it get fully charged first. Then remove the charger and keep the Vol up and power button pressed for ~10 secs or more, and see where it takes you.
Click to expand...
Click to collapse
CloudCompute said:
eusagc said:
Let it get fully charged first. Then remove the charger and keep the Vol up and power button pressed for ~10 secs or more, and see where it takes you.
Click to expand...
Click to collapse
Ok dude, will do. Thanks!
Click to expand...
Click to collapse
CloudCompute said:
eusagc said:
Let it get fully charged first. Then remove the charger and keep the Vol up and power button pressed for ~10 secs or more, and see where it takes you.
Click to expand...
Click to collapse
Done bro. Although I must say, I'm kinda back like yesterday when the phone is just helplessly discharging until it drops dead. Pressing vol+ and power restarts the phone, but I'm still stuck at the logo...
Click to expand...
Click to collapse
CloudCompute said:
Done bro. Although I must say, I'm kinda back like yesterday when the phone is just helplessly discharging until it drops dead. Pressing vol+ and power restarts the phone, but I'm still stuck at the logo...
Click to expand...
Click to collapse
You seem to be in a sticky situation bro. Your recovery seems to be broken because in stock recovery Vol up + power should ideally take you to recovery and not restart. If you could somehow boot into fastboot mode then it could open up some options to bring your phone to life.
With no way to connect to the phone the only options left are the hardware buttons. I am sure you'd have tried them already, but just in case you have not, try the other 2 key combinations also, Vol down + power and Vol up + Volume down + power, for ~10 secs, to check if any of these either forces a factory reset or boots the phone into fastboot mode.
eusagc said:
Hi there,
Kindly help... I successfully installed B512 on my TL10 using force upgrade method, afterwhich I changed recovery to TWRP 3.0.2 using mobopx v2.2, which was also successful. And then I installed SuperSU 2.46 via TWRP, then cleared cache/dalvik. But upon rebooting system, I get a blank screen, even after waiting for more than 15 minutes.
And so I tried going to TWRP (Vol+ and power), which was successful, in order to boot to bootloader, with the intention of loading back the stock bootloader via adb, so that I can force install B512 from my microSD card again. It seemed to install fine...
However, at this point, I cannot reboot to bootloader (Vol- and power) anymore, I only get blank screen. Trying recovery (Vol+ and power) doesn't work either. Rebooting normally gives me the same. I cannot by any means connect via adb now.
Is there any way to unbrick my phone at this point?
Thanks so much. Cheers.
Click to expand...
Click to collapse
Go back to stock recovery reflash stock rom make sure you have a unlocked bootloader......all remember that Google is your friend.....
CloudCompute said:
You seem to be in a sticky situation bro. Your recovery seems to be broken because in stock recovery Vol up + power should ideally take you to recovery and not restart. If you could somehow boot into fastboot mode then it could open up some options to bring your phone to life.
Click to expand...
Click to collapse
That's correct bro. Although it appears from adb that I was able to install the stock recovery, I cannot access it with Vol+ and power.
CloudCompute said:
With no way to connect to the phone the only options left are the hardware buttons. I am sure you'd have tried them already, but just in case you have not, try the other 2 key combinations also, Vol down + power and Vol up + Volume down + power, for ~10 secs, to check if any of these either forces a factory reset or boots the phone into fastboot mode.
Click to expand...
Click to collapse
Yes, I did. And I can't even boot to bootloader after all that... The phone only seems to charge, but is stuck at the logo.
I'm ready to send this to Huawei's service center. Is there anything more I can do at this point before I do that? Thanks so much.
stinka318 said:
Go back to stock recovery reflash stock rom make sure you have a unlocked bootloader......all remember that Google is your friend.....
Click to expand...
Click to collapse
Thanks bro, but that's what I did, or at least was planning to do. After rooting B512 via TWRP, the phone got stuck at the logo. And so I tried to install stock recovery, which it did, in order to reflash the stock ROM. But at this point I'm still stuck at the logo, and I can't access recovery and BL anymore. The BL is unlocked right from the start...
eusagc said:
Thanks bro, but that's what I did, or at least was planning to do. After rooting B512 via TWRP, the phone got stuck at the logo. And so I tried to install stock recovery, which it did, in order to reflash the stock ROM. But at this point I'm still stuck at the logo, and I can't access recovery and BL anymore. The BL is unlocked right from the start...
Click to expand...
Click to collapse
Did you try volume down and then plug USB in on computer then command prompt fast boot reboot it may work.
eusagc said:
I'm ready to send this to Huawei's service center. Is there anything more I can do at this point before I do that? Thanks so much.
Click to expand...
Click to collapse
Go ahead, send it to Huawei service centre. They'll have ways to reach the internal memory after opening up the device.
stinka318 said:
Did you try volume down and then plug USB in on computer then command prompt fast boot reboot it may work.
Click to expand...
Click to collapse
Thank you for this suggestion brother. I tried exactly as you described, however, the phone looks badly discharged, and while the screen was blinking/showing the red battery icon, it doesn't seem to want to charge. I waited around 5 minutes, but nothing seems to progress from here.
And so now, I moved the USB cable to a proper charger, and now it seems to be charging, with the LED light a steady red, and the screen the normal red circle with "0%" inside. It seems to be charging at the moment, although I really have to wait until it shows "1%" until I can surely say so.
One thing that's different now is that the phone hasn't turned on (by itself) yet. And at least this looks promising.
I'll let you know what happens in a while... Thank you!
eusagc said:
Thank you for this suggestion brother. I tried exactly as you described, however, the phone looks badly discharged, and while the screen was blinking/showing the red battery icon, it doesn't seem to want to charge. I waited around 5 minutes, but nothing seems to progress from here.
And so now, I moved the USB cable to a proper charger, and now it seems to be charging, with the LED light a steady red, and the screen the normal red circle with "0%" inside. It seems to be charging at the moment, although I really have to wait until it shows "1%" until I can surely say so.
One thing that's different now is that the phone hasn't turned on (by itself) yet. And at least this looks promising.
I'll let you know what happens in a while... Thank you!
Click to expand...
Click to collapse
Charging's at 4% now... And the phone hasn't turned on so far... Looks promising...
eusagc said:
Charging's at 4% now... And the phone hasn't turned on so far... Looks promising...
Click to expand...
Click to collapse
All well now?
CloudCompute said:
All well now?
Click to expand...
Click to collapse
I was out of town for the past few weeks and didn't have time to do this. I'm back now and plan to work on this tonight. Thank you bro, I'll let you know how it goes...

Bootloop Google Logo (Try a lot a solutions)

Hi,
I have a problem with my Nexus 5, it bootloop on the Google Logo
I try to put a little piece of paper behind the power button and also to click on the power button a lot of times during the boot but it still stuck..
What can I do to try fix it ?
Thanks in advance
is this the kind of bootloop where it loops because of a stuck power button or is it a software based bootloop?
matgras said:
is this the kind of bootloop where it loops because of a stuck power button or is it a software based bootloop?
Click to expand...
Click to collapse
Same as this : https://www.youtube.com/watch?v=jzj73qYg5HA
I take the motherboard off, try to connect just the battery and the screen but same problem..
nathan30 said:
Same as this : https://www.youtube.com/watch?v=jzj73qYg5HA
I take the motherboard off, try to connect just the battery and the screen but same problem..
Click to expand...
Click to collapse
that happened to my old ativ s as well, it was due to a broken power button (electrically stuck, not mechanically) the only solution for me was to solder a new power button on it. But I just used it as an excuse to get a new phone.
matgras said:
that happened to my old ativ s as well, it was due to a broken power button (electrically stuck, not mechanically) the only solution for me was to solder a new power button on it. But I just used it as an excuse to get a new phone.
Click to expand...
Click to collapse
Did you try this solution or not ? To know if I can try to do it
nathan30 said:
Did you try this solution or not ? To know if I can try to do it
Click to expand...
Click to collapse
I haven't, it may be very hard depending on the phone model, I just removed it with pliers so I could boot it with a usb cable and I got all the data I needed from my phone.
Can you get your phone into recovery or fastboot mode?
matgras said:
I haven't, it may be very hard depending on the phone model, I just removed it with pliers so I could boot it with a usb cable and I got all the data I needed from my phone.
Can you get your phone into recovery or fastboot mode?
Click to expand...
Click to collapse
So I try to unsolder the power button and now the phone didn't bootloop anymore. Now I'm waiting the new power button I ordered to see.
And to answer your question, I was not able to reach fastboot or the recovery
nathan30 said:
So I try to unsolder the power button and now the phone didn't bootloop anymore. Now I'm waiting the new power button I ordered to see.
And to answer your question, I was not able to reach fastboot or the recovery
Click to expand...
Click to collapse
if you install gravitybox and xposed there should be an option to turn on the screen with the volume buttons (I'm not sure though, it might have been another module) so you could use that as a temporary solution.
matgras said:
if you install gravitybox and xposed there should be an option to turn on the screen with the volume buttons (I'm not sure though, it might have been another module) so you could use that as a temporary solution.
Click to expand...
Click to collapse
I can't have the phone booting, so I have to wait the new button ^^
nathan30 said:
I can't have the phone booting, so I have to wait the new button ^^
Click to expand...
Click to collapse
with phone turned off, (you can remove the battery and re plug it), hold the volume down button and connect it to the wall charger(do not use PC,it will trigger lg download mode), then you will be able to go to fastboot.
Once there you can:
fastboot reboot to boot to normal OS
fastboot boot twrp so you can install a rom or any other mod
opssemnik said:
with phone turned off, (you can remove the battery and re plug it), hold the volume down button and connect it to the wall charger(do not use PC,it will trigger lg download mode), then you will be able to go to fastboot.
Once there you can:
fastboot reboot to boot to normal OS
fastboot boot twrp so you can install a rom or any other mod
Click to expand...
Click to collapse
Oh I didn't know this tips. Thanks a lot I will try asap. But the lg download mode can't be a good solution to reinstall a rom with the computer?
nathan30 said:
Oh I didn't know this tips. Thanks a lot I will try asap. But the lg download mode can't be a good solution to reinstall a rom with the computer?
Click to expand...
Click to collapse
it locks the bootloader and fully wipes the userdata
here is the thread link
http://forum.xda-developers.com/goo...orial-how-to-flash-factory-images-lg-t2713833
opssemnik said:
it locks the bootloader and fully wipes the userdata
here is the thread link
http://forum.xda-developers.com/goo...orial-how-to-flash-factory-images-lg-t2713833
Click to expand...
Click to collapse
So I try to push volume down and connecting the charger. I reach the fastboot menu but I can't select "start" or something else because without power button I can't validate my choice..
nathan30 said:
So I try to push volume down and connecting the charger. I reach the fastboot menu but I can't select "start" or something else because without power button I can't validate my choice..
Click to expand...
Click to collapse
as i said, you need a computer once you reach fastboot mode, to send the commands.
fastboot reboot - to boot into normal OS
fastboot boot twrp - to boot twrp
opssemnik said:
as i said, you need a computer once you reach fastboot mode, to send the commands.
fastboot reboot - to boot into normal OS
fastboot boot twrp - to boot twrp
Click to expand...
Click to collapse
Oh i didn't understand, thanks a lot it's working
Now I'm just waiting my new power button
i had this **** sorry for swearing i thought its something with my ROM CM13 Nightly I tried the repair service they said that they changed the power button no data was deleted so its probably the button but some one had a guide how to get the phone out that **** using your PC and manual ADB commands ( No program command line only )
I need help with this issue
when this problem reached me it was a meter of replacing the power button itself (it's like stuck there) by the way my phone was still under warranty so they changed it for me
https://www.ifixit.com/Answers/View/208337/How+do+I+fix+a+Nexus+5+Power+Button+Issue
https://www.aliexpress.com/store/pr...821-NEW-Free-Shipping/629458_32289287372.html
https://www.aliexpress.com/popular/nexus-5-on-off-switch.html
If that helped you dont forget to press the thank you button

OPO Can't boot in Fastboot mode

Hi,
After 2 days of research, I permit to ask your help. Since replacing my SIM tray soldering on the motherboard of my OPO, I can't boot my OPO normaly.
Just the recovery (TWRP) boot, I can "install", "restore" what I want, but after installing anything change, My OPO reboot into Recovery each time !
Maybe my OPO is briked ? Maybe is it possible to re install Fastboot if it's lost ? Can you help me please.
Thanks in advance for your help !
eramiel said:
Hi,
After 2 days of research, I permit to ask your help. Since replacing my SIM tray soldering on the motherboard of my OPO, I can't boot my OPO normaly.
Just the recovery (TWRP) boot, I can "install", "restore" what I want, but after installing anything change, My OPO reboot into Recovery each time !
Maybe my OPO is briked ? Maybe is it possible to re install Fastboot if it's lost ? Can you help me please.
Thanks in advance for your help !
Click to expand...
Click to collapse
You can't even boot to fastboot?
same here
Hi,
I have the same issue here, phone charged, can access TWRP, but no fastboot. hold up + power doesn't launch fastboot but recovery :|
Please help him :good:, I hope it will helps me too :angel:
cm-t said:
Hi,
I have the same issue here, phone charged, can access TWRP, but no fastboot. hold up + power doesn't launch fastboot but recovery :|
Please help him :good:, I hope it will helps me too :angel:
Click to expand...
Click to collapse
Not even able to boot into system,too?
Mr.Ak said:
You can't even boot to fastboot?
Click to expand...
Click to collapse
Sorry, no I can’t access into fastboot too
Maybe I supposed the Vol- vol+ button will be broken, but it seems good... For test, I can’t navigate in TWRP with vol- vol+ button but maybe is normal in 3.0.0 version, please can anyone test and say me is it same ?
eramiel said:
Sorry, no I can’t access into fastboot too
Maybe I supposed the Vol- vol+ button will be broken, but it seems good... For test, I can’t navigate in TWRP with vol- vol+ button but maybe is normal in 3.0.0 version, please can anyone test and say me is it same ?
Click to expand...
Click to collapse
Nope,those buttons doesn't work in twrp.
Open up your back cover and clean it(isopropyl alcohol would be awesome).Also,clean volume button strips a bit.At last, make sure you fit back cover correctly.
Thanks, I will clean this afternoon and tell you if resolve the problem
Mr.Ak said:
Nope,those buttons doesn't work in twrp.
Open up your back cover and clean it(isopropyl alcohol would be awesome).Also,clean volume button strips a bit.At last, make sure you fit back cover correctly.
Click to expand...
Click to collapse
Hi Mr AK,
As you advise me, I’ve cleaned the volume button with alcohol , unfortunately nothing has changed, I always boot to TWRP
eramiel said:
Hi Mr AK,
As you advise me, I’ve cleaned the volume button with alcohol , unfortunately nothing has changed, I always boot to TWRP
Click to expand...
Click to collapse
Did you clean the volume strips as well?
Yes, I’ve cleaned the back of the strip volume button, and test with the strip straight without the curve, and it is same problem...
Hi,
My problem persist, I can't boot in fastboot mode, maybe the fastboot partition is lost ? How can know it ? If is the case, How can I repair the partition please ?
Thanks in advance for your response.
Did you try rebooting to fastboot from either the TWRP menu or from your ROM?
Yes I tried, but it reboot in TWRP, no fastboot mode
Delete
Ok, but delete what and how ?
Try using the color os toolkit https://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732 and even though it says do not use if it is soft bricked use it this helped me
kallum7 said:
Try using the color os toolkit https://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732 and even though it says do not use if it is soft bricked use it this helped me
Click to expand...
Click to collapse
Hi Kallum,
Thanks for your help, I've allready test this toolkit, but for run process of this toolkit the OPO must to be in fastboot mode (I think) no ? Because I can't boot in fastboot :-/
eramiel said:
Hi Kallum,
Thanks for your help, I've allready test this toolkit, but for run process of this toolkit the OPO must to be in fastboot mode (I think) no ? Because I can't boot in fastboot :-/
Click to expand...
Click to collapse
No this toolkit does not run in fastboot mode what you need to do is power off the device and hold volume up and power and plug in your usb cable the screen should be black and then in device manager you should have a option called ports or if the driver for the qualccom port is not installed it should come up and right click the driver that is not installed and select find driver online once that is done click ms 9. Exe and run it as admin
kallum7 said:
No this toolkit does not run in fastboot mode what you need to do is power off the device and hold volume up and power and plug in your usb cable the screen should be black and then in device manager you should have a option called ports or if the driver for the qualccom port is not installed it should come up and right click the driver that is not installed and select find driver online once that is done click ms 9. Exe and run it as admin
Click to expand...
Click to collapse
Hi Kallum,
Thank you, with your help I've done the restoration of the OPO. But now when I power On the smartphone, it boot only the recovery of Color OS
I suppose is it died ?
eramiel said:
Hi Kallum,
Thank you, with your help I've done the restoration of the OPO. But now when I power On the smartphone, it boot only the recovery of Color OS
I suppose is it died ?
Click to expand...
Click to collapse
now please try booting into fastboot mode and then please get back in touch with me

[SOLVED] Bootloop TWRP

anyone can help me how fix this, bootloop on twrp logo and can't flash to stock recovery. I hope someone help me
I wanna back to factory recovery, tell me how to remove that ???
Model : SM-A750GN/DS
Scytheria said:
anyone can help me how fix this, bootloop on twrp logo and can't flash to stock recovery. I hope someone help me
Click to expand...
Click to collapse
Tern off phone with hold press vol down and power and when turned of connect charging cable and press vol down with vol up in the same time you will go to bootloader then flash stock
I such you have that issues with twrp of you fixed it tell me
play 5 said:
Tern off phone with hold press vol down and power and when turned of connect charging cable and press vol down with vol up in the same time you will go to bootloader then flash stock
I such you have that issues with twrp of you fixed it tell me
Click to expand...
Click to collapse
Unfortunelly, that not work, any have solution ?
Scytheria said:
Unfortunelly, that not work, any have solution ?
Click to expand...
Click to collapse
Dont say dont work im such you im have serched for this issues fixs more than 4 haur
Serch in youtube how to openA7 2018 bootloader
And dont lost you need to tern off phone then go to bootloader
If you pressed down vol with power in first 7 second it will be restart dont stop of pressing if the screen blacked for second time press vol up & down in some time
-Without power!!
And need your phone change with cable when you do all of thise↑
Firs take cable on your phone then do all of i writed then reply to me
play 5 said:
Dont say dont work im such you im have serched for this issues fixs more than 4 haur
Serch in youtube how to openA7 2018 bootloader
And dont lost you need to tern off phone then go to bootloader
If you pressed down vol with power in first 7 second it will be restart dont stop of pressing if the screen blacked for second time press vol up & down in some time
-Without power!!
And need your phone change with cable when you do all of thise↑
Firs take cable on your phone then do all of i writed then reply to me
Click to expand...
Click to collapse
THANKS A LOT MAN. I LOVE U SO MUCH !!!
Scytheria said:
THANKS A LOT MAN. I LOVE U SO MUCH !!!
Click to expand...
Click to collapse
You sloved it right?
play 5 said:
You sloved it right?
Click to expand...
Click to collapse
yeah man, thanks a lot for help me
Scytheria said:
anyone can help me how fix this, bootloop on twrp logo and can't flash to stock recovery. I hope someone help me
I wanna back to factory recovery, tell me how to remove that ???
Model : SM-A750GN/DS
Click to expand...
Click to collapse
Hey,
I have the same problem with the bootloop and the corrupted locking screen. I'm able to boot into download mode, but I can't figure out which system to flash. I tried several ones, but none of them worked... and I can't get back to the factory recovery. If somebody has an idea which recovery system could work I would be very pleased to know.
Software used to Flash: Odin
Device: a750fnxxu4ctc4
Scytheria said:
THANKS A LOT MAN. I LOVE U SO MUCH !!!
Click to expand...
Click to collapse
Hey , you gotta help me out here please !! i am not able to boot into download mode.
press all buttons at once (volume down + volume up + power button) until the screen turns black. Than immeadiatly press volume up and volume down button and insert cable connected to pc.

Categories

Resources