My LCD is fried due to high temperature.Need a spare from a used phone in India.PM me
Me 2
Me 2 . Had a at the bottom because of heat.
Related
Few days back my galaxy sl dropped from running bike and the LCD broken, also earlier i was having problem with soft keys and the man at samsung service center told me that the whole front panel must be changed, costing around Rs.6000.
After the phone dropped i checked it with my friends LCD screen and everything was working.
Tell me that is there any cheaper option available, as spending Rs.6000 is worthless because the phone is already 2 year old and i would buy a new phone in that price.... Is there any local or cheap lcd available which may be used for sometime???
Front lcd? Are you sure it is not the touchscreen digitizer? Usually when people drop the phone the touchscreen gets broken and not the lcd. The digitizer costs around 7 and 14 dolars in ebay with free shipping. Check if you need the lcd (what you see) or the digitizer (what you touch)
Sent from my GT-I9003 using xda app-developers app
Yesterday, My phone fell and the screen got damaged and now the touch is not working.
I am using a mouse to operate touch by USB OTG cable.
The Company's Service Centre said that the new screen would cost ₹7,200.
while some repair person said it will be ₹5,500.
But since the resale value of the phone is so less, I don't wish to spend so much.
Can I get an inexpensive screen online or from somewhere else even if not of Samsung's.
Please help
http://www.parts4repair.com/samsung-i9103-galaxy-r/
I hope the above link helps.. from what I understand, if the complete screen needs to be replaced then the part itself is quoted at USD90 = INR 5K
However if only the touch is unresponsive then changing the digitiser should do the trick. It costs 1/3 the price USD28 = INR 1550
The front plate is USD10 = INR 550 approx (But i dont know if this also covers the screen itself which cracked)
EDIT:
I just checked the shipping, its approx USD 5 = INR 275
Hope this helps
vbz89 said:
http://www.parts4repair.com/samsung-i9103-galaxy-r/
I hope the above link helps.. from what I understand, if the complete screen needs to be replaced then the part itself is quoted at USD90 = INR 5K
However if only the touch is unresponsive then changing the digitiser should do the trick. It costs 1/3 the price USD28 = INR 1550
The front plate is USD10 = INR 550 approx (But i dont know if this also covers the screen itself which cracked)
EDIT:
I just checked the shipping, its approx USD 5 = INR 275
Hope this helps
Click to expand...
Click to collapse
It is difficult/impossible to change the touch Digitizer alone.The digitizer is glued to LCD and you cant remove the digitizer without damaging the LCD
Hello All,
got my digitizer & lcd screen brooke, any place where to get the spare parts in Delhi?
there are lot of threads for digitzer so i will try to bargain, but can you give me the idea of LCD screen cost?
hey bro the touch panel cost you about 2500 or less.I don't know the actual price.please replay me if u buy this what cost it is??
Definitely i'll update this forum ASAP
Hi ...my touch pad is also broken ...i buy it @only1000 rs....
Sent from my Micromax A116 using xda premium
My display stopped working.Expecting any help to find a low cost display unit. Help p
mohsin.jmi said:
Hello All,
got my digitizer & lcd screen brooke, any place where to get the spare parts in Delhi?
there are lot of threads for digitzer so i will try to bargain, but can you give me the idea of LCD screen cost?
Click to expand...
Click to collapse
My display stopped working. I recently changed the digitizer and I can see that my phone is switching on So I contacted the service centre and they told the full molding should be changed; Including digitizer and touch screen. Can anyone help me to find any low cost item in Hyderabad?
may i know from wher u bought?
ahesartamboli said:
Hi ...my touch pad is also broken ...i buy it @only1000 rs....
Sent from my Micromax A116 using xda premium
Click to expand...
Click to collapse
may i know from wher u bought?and is it the total touch and digitizer both?
Digitizer and Lcd screen are available online from Ebay store
Digitizer 810/-
Link http://www.ebay.in/itm/TOUCH-SCREEN...ries&hash=item25855b7627&_uhb=1#ht_4772wt_906
Lcd screen 1220/- + 39/- (Shipping)
http://www.ebay.in/itm/REPLACEMENT-...ies&hash=item19de02c9fe&_uhb=1#ht_2758wt_1186
Cheap digitizers - No No
Recently got fixed my canvas 2's LCD display and Digitizer (touch) from nehru place for 2500/- the lcd display is quite acceptable at such price but the digitizer does not do any justice.
I ran a multi-touch test and it showed only two touch (where OEM digitizer is 5 point touch), calibration was also slightly imperfect and also the build quality of these cheap digitizers are very low when compared to the OEM.
If you use your canvas 2 for gaming then please do not go for these cheap digitizers, do your homework before purchasing any cheap digitizers.
Can any1 say how to replace the touchscreen without breaking digitizer?
I've purchased the touchscreen for my canvas 2. How can I insert this without breaking the digitizer. Also which Glue using to fix it?
I have a Samsung Galaxy Tab 2 10.1 that I got from somebody to replace the cracked screen. This is not my first screen repair but it is my first time working with these Samsung tablets. I went out and bought a new screen for it which showed up in the mail damaged, so I contacted the seller and he sent a new one which was in good condition when it arrived. I went ahead and put it on the tablet with no problems. I turned the tablet on and it didn't work. I googled the problem and then I found out that there are different revisions of this screen. The screen that i had installed onto the tablet was a rev 0.2 and the one that arrived damaged was a rev 0.3. None of the screens work including the original but I think that is due to it being broken beyond use while I was removing it.
The original screen doesn't say what revision it is. The flex cable has MCF-101-0403-V3 ISU 1238 on the cable. Would this be a rev 0.0 cable? I am assuming that it is because there is no stated revision number on it.
I have found this item on ebay - http://www.ebay.ca/itm/Samsung-Gala...ablet_eReader_Accessories&hash=item5657a7329f
The ad says that it is universal and that it will work for all versions. Is this even possible? I want to make sure that it will work because it is quite expensive.
I really need to get this tablet fixed because the owner has waited a long time and I'm still no closer to fixing it.
Any replies or help will be extremely appreciated!
canadaboy25
That is the one I used for my Galaxy Tab 2 from that same seller and it worked fine. Mine was p5113 Rev2
Did it have the pre-applied adhesive on the back side?
Replacing the LCD or the Digitiser
I have a p5113 and replacing the digitiser was fairly easy. You have to buy the parts with the tools included. I used the prying tools and a hair dryer(you may use a heat gun )to removing the digitiser. On the LCD you may have to unscrew. Be mindful to work in an area that is dust free and you are bound to have broken glass if the digitiser is being replaced. Take a look at eBay or Amazon for the replacement kits. They are pretty cheap to replace. Also take a look at YouTube videos for the replacement of the screen and digitiser.
I dropped my Lenovo p2, accidently. Although the glass did not crack, the screen has stopped responding to touches in a particular area, in the shape of a horizontal band (about 1 cm width). Does anyone know what could have been damaged and how much it would cost to replace/repair? My phone is still under warranty. Please advise.
Not sure if drops are covered under warranty, also no idea how much it would cost to have it replaced at a repair shop.
I do know that you can buy a replacement digitizer including screen and frame on aliexpress for about 80-90 euros. I bought one a few days ago as my screen did crack when I dropped my phone.
Few weeks ago one of my friend accidentally dropped the lenovo p2 3gb ram variant. Display got completely shattered and there was no light in display. When he goes to service centre (Delhi, India) and asked for digitizer they said that they don't have one in any store in delhi and asked him to exchange his phone with lenovo k5 note.
shabab malik said:
Few weeks ago one of my friend accidentally dropped the lenovo p2 3gb ram variant. Display got completely shattered and there was no light in display. When he goes to service centre (Delhi, India) and asked for digitizer they said that they don't have one in any store in delhi and asked him to exchange his phone with lenovo k5 note.
Click to expand...
Click to collapse
Digitizer means?
Varun Sai said:
Digitizer means?
Click to expand...
Click to collapse
Glass piece that is attached to the LCD is the digitizer.
Most smartphone these days come with attached digitizer with lcd.