Related
Hi all,
Due to a bad drop off the 2nd. floor balcony to the street under, my i9003's display got cracked. Everything except the display (blank, black) was working fine, I could hear it ring when someone called.
I visited the authorized sammy service centre nearby and they inspected the phone. The entire display part (which has a pcb stuck to it and non-removable) needed to be replaced. All other things including the mainboard and back casing were ok.
They gave an estimate of Rs.7000 (US$ 140). Today I called and they said, your device is ready, total bill would be Rs.7000+4% VAT=Rs.7280
I wonder it is the exact price they gave estimate for... something fishy? Any inputs if I am being overcharged? Did anyone here go with a display change before?
TIA
On physical there is no warranty. U have to pay to them.
agnivo007 said:
Hi all,
Due to a bad drop off the 2nd. floor balcony to the street under, my i9003's display got cracked. Everything except the display (blank, black) was working fine, I could hear it ring when someone called.
I visited the authorized sammy service centre nearby and they inspected the phone. The entire display part (which has a pcb stuck to it and non-removable) needed to be replaced. All other things including the mainboard and back casing were ok.
They gave an estimate of Rs.7000 (US$ 140). Today I called and they said, your device is ready, total bill would be Rs.7000+4% VAT=Rs.7280
I wonder it is the exact price they gave estimate for... something fishy? Any inputs if I am being overcharged? Did anyone here go with a display change before?
TIA
Click to expand...
Click to collapse
in which service center did u go go to the lee road center they are the best.
vishal24387 said:
On physical there is no warranty. U have to pay to them.
Click to expand...
Click to collapse
Yes, I'm fully aware of it. My question is: are they charging right for the replaced part and labour charges?
podanimesh said:
in which service center did u go go to the lee road center they are the best.
Click to expand...
Click to collapse
I went to Barrackpore...closest to me. I rarely go to the hustling and bustling proper Kolkata... it's tiring!
@Anyone: If you have contacts with a sammy service center (or even an employee), kindly confirm the cost of the display part.
Tatz strange I had my display replaced freely only a month back following the phone falling onto the tiles! But the display was working, ABCs the touch was not! I told them since morning it's like this and they changed it in an hour while I was in India for Diwali! luckily this happened while I was there.
☞★sent from drajax's Galaxy SL!!! *♂ツ
I guess that's because you do not have physical evidence of damage, still the OP got charged 140USD is pretty steep >_<. I guess I should not drop the phone.
Sounds about right for official service. In Malaysia a cracked display + glass will incur about RM350, do the maths.
They are charging right , offcourse it is more amount to pay if you compare to local market. In DELHI if you went to GAFAR market(India largest mobile market) then you will get your display from 1.5k to 4.5k depending upon build quality.
Just check local market first if you didn't paid.
Sent from my GT-I9003 using Tapatalk
I think you would get it done within 4.5-5K in Bangalore. The AMOLED screen WITH some lights costed 7K for a friend of mine in Bangalore...Only screen should obviously be nearly 4.5 - 5K ...That's it~! Not more
Well, they said that the entire LCD Assy needed to be replaced as it comes in a sealed monoblock part which houses the top cover, gorilla glass, touch buttons, the lcd, sensors like proximity, light and front cam all on a pcb stuck to the lcd. In fact if you imagine total front part including the metallic rim, that is all the LCD assy holds.
The back cover, main assembly and mother board were OK.
I dug up a service manual and confirmed the part number: QFR01 (GH97-11829A)
Thanks everyone for your inputs... I guess there is no scope of saying anything to the service center guys as they have already completed the repairing... But still, I'll bluff them about friends getting that done for 5.5k! LOL
Sent from my GT-I9003 using Tapatalk
hi
i had my display replaced for Rs 4500 due to a crack near the 'back' softkey..
i got a concession of 20% since the mobile was only 2 months old
it costs 5400
agnivo007 said:
Hi all,
Due to a bad drop off the 2nd. floor balcony to the street under, my i9003's display got cracked. Everything except the display (blank, black) was working fine, I could hear it ring when someone called.
I visited the authorized sammy service centre nearby and they inspected the phone. The entire display part (which has a pcb stuck to it and non-removable) needed to be replaced. All other things including the mainboard and back casing were ok.
They gave an estimate of Rs.7000 (US$ 140). Today I called and they said, your device is ready, total bill would be Rs.7000+4% VAT=Rs.7280
I wonder it is the exact price they gave estimate for... something fishy? Any inputs if I am being overcharged? Did anyone here go with a display change before?
TIA
Click to expand...
Click to collapse
i gt replaced within 5 mis.. they charged me 5400rs
Update: Finally received it from the service center. Looks spanky new! Seems they replaced the main body frame too. Billed me Rs.7200. The senior tech wasn't there then and could not talk for a discount...
Came home, fired kies and updated to official GB I've been waiting for!
Guys, suggest you take care about not cracking the display... it really makes a hole in the wallet...
agnivo007 said:
Hi all,
Due to a bad drop off the 2nd. floor balcony to the street under, my i9003's display got cracked. Everything except the display (blank, black) was working fine, I could hear it ring when someone called.
I visited the authorized sammy service centre nearby and they inspected the phone. The entire display part (which has a pcb stuck to it and non-removable) needed to be replaced. All other things including the mainboard and back casing were ok.
They gave an estimate of Rs.7000 (US$ 140). Today I called and they said, your device is ready, total bill would be Rs.7000+4% VAT=Rs.7280
I wonder it is the exact price they gave estimate for... something fishy? Any inputs if I am being overcharged? Did anyone here go with a display change before?
TIA
Click to expand...
Click to collapse
I guess you missed the opportunity to upgrade you device. I guess paying 7.5K for the device is waste becuase you can not resell the device with atleast a little profit. My advice is dont change. But a new phone like galaxy nexus from US (15 to 17K)
chkneo said:
I guess you missed the opportunity to upgrade you device. I guess paying 7.5K for the device is waste becuase you can not resell the device with atleast a little profit. My advice is dont change. But a new phone like galaxy nexus from US (15 to 17K)
Click to expand...
Click to collapse
He already changed the display and this thread is 8 months old mate.
Sent from my GT-I9100 using xda premium
Display problem
I sleep with my phone besides me....I might have rolled over it in sleep real bad today and in the morning I see the display showing red strips in bright areas of the screen...Eg.Google search bar, Keypad, etc...
I asked at a phone repair shop it costs 4.5k(Samsung original) wheras Samsung service center quoted a price of 6950Rs somthing...
Can anyone judge what the problem might be...Do i need to get a new display panel....?
please HELP!
I have tried to take snap shots of the Screen...Attached
u r being charged too much i got my screen fixed in rs 5600 from the service center
i had the same problem
I just found out today that the problem comes n goes away...the display becoms normal for a while n then again goes back to being patchy red....
Recently, i dropped my note10.1 and the digitizer is cracked. :crying:
I want to replace it asap but i can't find much about digitizer for samsung galaxy note 10.1. And i heard that it'll compactable with the digitizer for galaxy tab 10.1 P7500.
So my question is" Can I replace my digitizer with that of galaxy tab 10.1?" Someone confirm me pls. And yea, ASAP.
guGG29 said:
Recently, i dropped my note10.1 and the digitizer is cracked. :crying:
I want to replace it asap but i can't find much about digitizer for samsung galaxy note 10.1. And i heard that it'll compactable with the digitizer for galaxy tab 10.1 P7500.
So my question is" Can I replace my digitizer with that of galaxy tab 10.1?" Someone confirm me pls. And yea, ASAP.
Click to expand...
Click to collapse
No you can't different model of digitizer
Sent from my X10S using xda app-developers app
Can you post pictures?
I reckon it'll be expensive to replace too, the note 1 screen and digitizer cost $220 before being replaced.... And that was only about 1/2 the size of the 10.1....
ultramag69 said:
I reckon it'll be expensive to replace too, the note 1 screen and digitizer cost $220 before being replaced.... And that was only about 1/2 the size of the 10.1....
Click to expand...
Click to collapse
But only digitizer is cracked, not the LCD which is expensive. I found that they're around 60$.
But the digitizer for tab 10.1 is much cheaper, that's why i want to replace with it.
horse-racing dityder
asdfuogh said:
Can you post pictures?
Click to expand...
Click to collapse
no, i haven't disassambled it yet.
The trouble is, with most screens, that the digitiser is glued to the screen and is a major mongrel to get off without damaging the LCD... The note 10.1 has a wacom digitiser in it so I'd assume that would put the price up...
I remember there was someone in the note forum that said he had replaced the digitiser but it was not for the lay person to do. Most people who tried tended to break the LCD and then had to fork over the $220 anyway. Plus the postage, most coming from China, could be 2 - 3 weeks long....
ultramag69 said:
The trouble is, with most screens, that the digitiser is glued to the screen and is a major mongrel to get off without damaging the LCD... The note 10.1 has a wacom digitiser in it so I'd assume that would put the price up...
I remember there was someone in the note forum that said he had replaced the digitiser but it was not for the lay person to do. Most people who tried tended to break the LCD and then had to fork over the $220 anyway. Plus the postage, most coming from China, could be 2 - 3 weeks long....
Click to expand...
Click to collapse
Ifix it said that the screen is not glued tp the digitizer and it is easy to replace them
Sent from my GT-N8000 using xda app-developers app
Fair enough, I haven't pulled apart my note (with no intention of doing so any time soon) so haven't looked to see. Also lack of a technical manual doesn't help....
digitizer replacement
I will be swapping the glass on my n8013 shortly and I'm wondering if anyone else has had any success with the less expensive lenses available on eBay. It seems that gtab 1&2 digi's are the same part (yes they are serviceable without melting the glue and prying the glass off) and several of the listings I've seen claim n8000-series compatibility as well. Other listings advertise that they are only for the 8000 series; this may just be marketing, as they appear to be the same part and the same price (almost all are $40-50 except the some that list tab 1 compatibility, as low as $25 for these).
My question is: i know the note uses a "dual digitizer" for more accurate tracking, etc. Am I going to lose accuracy with another digi? Does anyone know how the guts of this thing are designed, will the lens not make a big difference? Or do these parts actually come with the dual digitizer built in? I know these eBay digi's will fit but I don't want my Note to suck at doing Note things, haha
ANY input on this matter is appreciated
Personly I wouldn't risk it. I know that the spen can't be used as a pointer on the tab and tab 2. How much of that is due to the glass itself, I don't know but if you go the cheap way, you may find your s pen no longer works.
To me, it isn't worth the risk,but if you do it, let us know how you got on.
Sent from my GT-I9100 using Tapatalk 2
Hi,
It happened to me once, about 2 months ago...
Euro GT-N8000, ITALY
I bought the replacement digitizer for the GT-N8000 from a store in California for around 70$.
I managed to cleanly open the tablet (I followed a video from yuotube) only to find that the replacement digitizer was a couple of mm too big.
Obviously it didn't fit...
At the end I had to send that tablet to a local Samsung service, and I had to pay 250 € to get it fixed. They replaced the digitizer, the lcd panel and the metal body.
dREI
Sent from my GT-N8000 using Tapatalk HD
drei666 said:
Hi,
It happened to me once, about 2 months ago...
Euro GT-N8000, ITALY
I bought the replacement digitizer for the GT-N8000 from a store in California for around 70$.
I managed to cleanly open the tablet (I followed a video from yuotube) only to find that the replacement digitizer was a couple of mm too big.
Obviously it didn't fit...
At the end I had to send that tablet to a local Samsung service, and I had to pay 250 € to get it fixed. They replaced the digitizer, the lcd panel and the metal body.
dREI
Sent from my GT-N8000 using Tapatalk HD
Click to expand...
Click to collapse
Wow that is almost the price of a new one now
success!
Ordered the Note 8000 8010 8013 replacement digi from ebay seller Gadgetfix in California. Unfortunately I didnt order one with the matching grey border around the screen, my new one is black instead but I dont mind. I opened the Note and carefully proceeded to dismantle it, taking extra care with the shards of glass that were stuck in the screen bezel with adhesive. After reassembly and turning it back on with my fingers crossed, it works perfectly! S pen, airview, hover, all 100% functional, and no issues with sizing, etc. I checked the part numbers on the original and replacement and they seemed to match up, although they were off by a digit or two, presumably because of the difference in color. Note: I made sure to buy the model that ONLY listed compatibility with the Note line, and didn't have model numbers listed for any of the Tab series (those were about $25 and mine was $45).
Anyway, I now have a clean-looking, fully functional , killer tablet and it only cost me an extra $45 and some sweat to fix my glass . Pics to follow.
Hello All,
got my digitizer & lcd screen brooke, any place where to get the spare parts in Delhi?
there are lot of threads for digitzer so i will try to bargain, but can you give me the idea of LCD screen cost?
hey bro the touch panel cost you about 2500 or less.I don't know the actual price.please replay me if u buy this what cost it is??
Definitely i'll update this forum ASAP
Hi ...my touch pad is also broken ...i buy it @only1000 rs....
Sent from my Micromax A116 using xda premium
My display stopped working.Expecting any help to find a low cost display unit. Help p
mohsin.jmi said:
Hello All,
got my digitizer & lcd screen brooke, any place where to get the spare parts in Delhi?
there are lot of threads for digitzer so i will try to bargain, but can you give me the idea of LCD screen cost?
Click to expand...
Click to collapse
My display stopped working. I recently changed the digitizer and I can see that my phone is switching on So I contacted the service centre and they told the full molding should be changed; Including digitizer and touch screen. Can anyone help me to find any low cost item in Hyderabad?
may i know from wher u bought?
ahesartamboli said:
Hi ...my touch pad is also broken ...i buy it @only1000 rs....
Sent from my Micromax A116 using xda premium
Click to expand...
Click to collapse
may i know from wher u bought?and is it the total touch and digitizer both?
Digitizer and Lcd screen are available online from Ebay store
Digitizer 810/-
Link http://www.ebay.in/itm/TOUCH-SCREEN...ries&hash=item25855b7627&_uhb=1#ht_4772wt_906
Lcd screen 1220/- + 39/- (Shipping)
http://www.ebay.in/itm/REPLACEMENT-...ies&hash=item19de02c9fe&_uhb=1#ht_2758wt_1186
Cheap digitizers - No No
Recently got fixed my canvas 2's LCD display and Digitizer (touch) from nehru place for 2500/- the lcd display is quite acceptable at such price but the digitizer does not do any justice.
I ran a multi-touch test and it showed only two touch (where OEM digitizer is 5 point touch), calibration was also slightly imperfect and also the build quality of these cheap digitizers are very low when compared to the OEM.
If you use your canvas 2 for gaming then please do not go for these cheap digitizers, do your homework before purchasing any cheap digitizers.
Can any1 say how to replace the touchscreen without breaking digitizer?
I've purchased the touchscreen for my canvas 2. How can I insert this without breaking the digitizer. Also which Glue using to fix it?
Hello fellow Nexus 4 users.
http://imgur.com/a/mDmv2
I replaced my N4 screen after an unfortunate drop with a replacement assembly available on eBay for approx £35 including frame, digitizer and LCD.
The colours of the screen were appalling. See images in the link. There are counterfeit screens circulating.
May our N4s live on forever more!
cookiem0nster said:
Hello fellow Nexus 4 users.
http://imgur.com/a/mDmv2
I replaced my N4 screen after an unfortunate drop with a replacement assembly available on eBay for approx £35 including frame, digitizer and LCD.
The colours of the screen were appalling. See images in the link. There are counterfeit screens circulating.
May our N4s live on forever more!
Click to expand...
Click to collapse
Sorry to hear that. Today you can get anything fake from ebay.
Though, it wouldn't be bad if you put link to that buyer or item
The seller has dealt with the issue well so far, I'm not sure they knew they were selling a fake screen. I will post further details if I am not compensated/refunded.
Are you certain it's a counterfeit and not a re-sold piece that had actually failed QA/QC?
I don't think it's possible for an authentic screen to be of such poor quality. You could be right - I dont know much about LCD manufacture
Wondering if it is even worth replacing these parts on a phone that's over 2 years old. Not sure about pricing in UK but here in the US you can pick up a mint or refurbished one for close to the price you paid. If I busted my N4 I think I would prob have to move on and get a newer phone although I would miss perhaps the most perfect phone ever made.
I'm actually debating what to do with a N5 I have with a cracked screen sell it as is or try and find a replacement. The problem I'm Runing into is finding a stock LCD that is not cracked and makes sense price wise. If only I had a screen seperator the stupid glass can be had for $5.
kgiri247 said:
Wondering if it is even worth replacing these parts on a phone that's over 2 years old. Not sure about pricing in UK but here in the US you can pick up a mint or refurbished one for close to the price you paid. If I busted my N4 I think I would prob have to move on and get a newer phone although I would miss perhaps the most perfect phone ever made.
I'm actually debating what to do with a N5 I have with a cracked screen sell it as is or try and find a replacement. The problem I'm Runing into is finding a stock LCD that is not cracked and makes sense price wise. If only I had a screen seperator the stupid glass can be had for $5.
Click to expand...
Click to collapse
This is the sad truth I've just discovered. I dropped my phone a few months back and now have an unresponsive stripe across my screen...I went looking for a screen replacement to find out I'd only save about $30 as opposed to buying a used mint condition N4. It's not worth the aggravation of doing all that work just to save a couple bucks, IMHO.
Yes I agree. I'm now debating getting a LCD separation machine and try to salvage the digitizer and LCD. Anyone ever attempt such a job?
kgiri247 I know this isn't the place to talk about selling phones but if you do want to sell it I'll more than happily take it off your hands, inbox me if you want to talk numbers! What I do know about separating the LCD and Digitizer is that it's very risky, they're two very delicate pieces of hardware and any mistakes could lead to having an expensive paperweight until you could find a replacement screen for it!
Yeah, it's getting to be a tough decision for a home who has something go wrong on these. I love this phone though as well as the development community for it. I might keep this phone just because the development community is excellent.
However if I had to get a new phone, I saw Amazon is selling the Kindle Fire phone unlocked for $199
Sent from my Nexus 4 using XDA Free mobile app
as far i can see on your images, your screen is original and coming from LG, how many months do you have it? do you have any other synthom than yellowish colours??
Have you double a check for how many fingers you can press? The N4 is 10 right, but some of the really cheap screens only support 5. You'll know very quickly whether it's fake or not.
bought a replacement screen for the n4 and the screen is horrible. has 2 dead pixels and the viewing angles are the worst ive ever seen on a cellphone.
gaboempyrean said:
bought a replacement screen for the n4 and the screen is horrible. has 2 dead pixels and the viewing angles are the worst ive ever seen on a cellphone.
Click to expand...
Click to collapse
If it's too good to be true, it usually is I'm afraid. The most expensive parts of a mobile phone are usually the screen and the battery, seeing as both are advanced pieces of technology. Processors, RAM, motherboards etc are cheap in reality, that's why you can buy a pretty powerful Android TV stick for cheap. No battery, no screen.
Nexus 4's are cheap nowadays, smash a screen, it probably isn't worth buying another screen unless you can be guaranteed of OEM'ness. It isn't all that hard to replace a digitizer though, so if your LCD panel is good, it might be worth giving it a try.
Where would you be able to buy a genuine part then?
Is this something you should bite the bullet and send to LG for repair to atleast be guaranteed a genuine part?
Edit
Sorry for bumping an old thread.
I just had mine replaced by LG for a defective ribbon cable which left the touch screen complete unresponsive. I went this route due to all the complaints about bad screens. $160 later, my N4 looks and works great! Pretty expensive though.
I had ordered a replacement from a seller within the US on eBay. I can't seem to find the sale anymore, but it was the real deal.
I had purchased a Nexus 4 and it came with a crappy replacement display, so I ordered a new one and did the swap myself.
It looks like a whole new phone.
Thanks for the info guys!
I'm from the UK like op and I was considering getting the replacement screen myself from ebay but I don't know if the seller replaced the part he gave to op and if it was genuine because they do have some good fakes on ebay.
I might just bite the bullet and do it myself I don't know the price for repair here Reeves360 but I'm sure it'll be similar to what you paid.
These phone manufacturers still charging extortionate prices on a nearly 3 year old phone.
I've long wondered about the legitimacy of the replacement screen I got off eBay. I bought from a seller that had sold a ton of them and had excellent feedback. But the screen always seemed like it was dim (had to crank it all the way up to be as bright as my other devices at 2/3-3/4 max brightness, plus the color is very cool/bluish. But it was always responsive and never had any ghost touches.
However, a couple days ago, it has started to freak out. Occasionally, after touching it, the bottom half or so flashes black. Somtimes it's one flash, sometimes it's a few flashes. It still responds perfectly while doing this, but it's obviously not normal. I disassembled it, gave the connectors a whack of Deoxit and ProGold, and reassembled it, but the glitching still remains, so it's not the connector. I need to try flashing something different (or maybe just dirty flashing LS again) to see if it's ROM or kernel related. I made some changes to Hellscore settings and I finally figured out why my battery life was so atrocious the last few months (it somehow got set minimum 2 cores online), so it's possible I screwed something else up.
If the problem is that it's a fake screen, I doubt the seller was aware.
It was the kernel (settings). Not sure what caused it, but I reflashed the kernel, reinstalled HK manager, and the screen hasn't glitched out since.
Hello,
I just got my hands on a used SM-T700 with a cracked display. The touchscreen digitizer is fine, only the display underneath is cracked.
I looked around on ebay and aliexpress, but couldn't find any acceptable price.
Since I can buy a working used device for 150 to 200 €, there is no point in paying the same amount for just the display itself.
So I wondered if someone knows a place with fair prices for the whole display unit or has a bricked device with a working display laying around?
TheHellSite said:
Hello,
I just got my hands on a used SM-T700 with a cracked display. The touchscreen digitizer is fine, only the display underneath is cracked.
I looked around on ebay and aliexpress, but couldn't find any acceptable price.
Since I can buy a working used device for 150 to 200 €, there is no point in paying the same amount for just the display itself.
So I wondered if someone knows a place with fair prices for the whole display unit or has a bricked device with a working display laying around?
Click to expand...
Click to collapse
rounded.com
spainsellers.com