Hi sorry for new post but i tried to search some info but it didint helped me. So at first i installed viper s rome (old one 4.1.X ) then i tried to install cyogen 11, but i think i accidentaly pushed out usb cable when i was transfering rom.zip file.
So i tried to flash cyogen rom but it failed. Then i tried to restore from recovery. It was successful, but then i stucked in boot loop (recovery mode).
So how can i go back to stock?
ErnestasC13c said:
Hi sorry for new post but i tried to search some info but it didint helped me. So at first i installed viper s rome (old one 4.1.X ) then i tried to install cyogen 11, but i think i accidentaly pushed out usb cable when i was transfering rom.zip file.
So i tried to flash cyogen rom but it failed. Then i tried to restore from recovery. It was successful, but then i stucked in boot loop (recovery mode).
So how can i go back to stock?
Click to expand...
Click to collapse
Some of this may help:
http://xda-university.com/as-a-user/how-to-recover-from-a-bootloop
http://forum.xda-developers.com/showthread.php?t=2678700
how to know which ruu is good for me? i bought my fone in england it was unlocked my radio is 1.11.50.05.28
ErnestasC13c said:
how to know which ruu is good for me? i bought my fone in england it was unlocked my radio is 1.11.50.05.28
Click to expand...
Click to collapse
You need your CID (Country ID), you can get it from the the boot screen:
Press and hold the VOLUME DOWN button, and then press and hold the POWER button.
Wait for the screen with the three Android images to appear, and then release the POWER and VOLUME DOWN buttons.
The CID is the 2nd line.
Write down the HBOOT and Radio versions too.
VLE PTV SHIP S-ON RL
HBOOT-2.15.0000
RADIO-1.11.50.05.28
OpenDSP-v31.1.0.45.0815
eMMC-boot
Dec 14 2012, 17:10:57:-1
all info i could get
So no CID on the screen above this?
What is the carrier? You can use an RUU that is equal or newer than what you have.
http://androidruu.com/?developer=Ville
so wich one should i pick?
ErnestasC13c said:
so wich one should i pick?
Click to expand...
Click to collapse
Try this to get your info:
http://forum.gsmhosting.com/vbb/f485/guide-how-get-cid-main-ver-bootloader-etc-1638931/
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.15.0000
(bootloader) version-baseband: 1.11.50.05.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH23MW404445
(bootloader) imei: 359901045063217
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4010000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3800mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-64bedd38
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
OK so it seems that HTC__001 is HTC Europe. So you need any RUU that is same or newer with "HTC_Europe" in the RUU name.
So if you look here:
http://www.androidruu.com/?developer=Ville
This one has the exact same radio.... hopefully this is it!
http://www.androidruu.com/getdownlo...28_10.27.50.08L_release_301814_signed_2_4.exe
808phone said:
OK so it seems that HTC__001 is HTC Europe. So you need any RUU that is same or newer with "HTC_Europe" in the RUU name.
So if you look here:
http://www.androidruu.com/?developer=Ville
This one has the exact same radio.... hopefully this is it!
http://www.androidruu.com/getdownlo...28_10.27.50.08L_release_301814_signed_2_4.exe
Click to expand...
Click to collapse
tried this one no luck
ErnestasC13c said:
tried this one no luck
Click to expand...
Click to collapse
What happened? Did it give an error? Did you relock the bootloader first?
Related
final edit*** my desire s is halfway through unrooting according to the 18min video but i get error 170 usb and the cid error when flashing ruu
this is my bootloader and the other thing
*** Security Warning ***
SAGA PVT SHIP S-ON RL
HBOOT-0.98.0000
RADIO- 38.03.02.11.M
eMMC-boot
Mar 10 201,14:58;38
(bootloader) version: 0.5
(bootloader) version-bootloader: 0.98.0000
(bootloader) version-baseband: 38.03.02.11_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.04.401.1
(bootloader) product: saga
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PG8810000
(bootloader) cidnum: T-MOB005
(bootloader) battery-status: good
(bootloader) battery-voltage: 4060mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 361a7ba6
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
can anyone point me in the direction of the appropriate t-mobile ruu for the uk p.s i'm aware i need a gold card however my cidnum says t-mob and i am trying to flash a t-mobile ruu so it should work right ?
even with a gold card it doesnt work keeps saying 140 error not the right ruu.. basically i think my version main is too high to update as its 3.04.401.1... is there a ruu high enough on tmobile uk for me? please dont say i need to root it again then .. if so then i guess i'm stuck like this because i cant be bothered rooting again, just really wanna know if there a working ruu
"goldcard" is the word you're looking for.
Search will guide you from here.
Jack_R1 said:
"goldcard" is the word you're looking for.
Search will guide you from here.
Click to expand...
Click to collapse
thansk yeah im going to try that when i get home from work
i also read this http://forum.xda-developers.com/showpost.php?p=16684717&postcount=38 and was wondering if this might affect me and what details would i need to look at on my phone and ruu to make sure its correct
bump.. first post, please read it. i would like some feedback
GGLDN said:
bump.. first post, please read it. i would like some feedback
Click to expand...
Click to collapse
Hi, do you mean the desirefanatics video? I've been through that procedure one week ago and had problems with the RUU. You can try to extract the rom.zip from the RUU and rename it to PG88IMG.zip, put it on your SD-card and boot into bootloader. The phone will find the zip and start the update!
Edit: Oh, and my phone is branded as well. If you find the rom.zip, look for a txt file called android-info. If your CID is in there, it should be fine to use without goldcard or whatever.
Hi everyone.
I'm trying to get back on stock (S4), but I can't find any RUU that matches my hboot and radio.
this is the result of fastboot getvar all:
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.15.0000
(bootloader) version-baseband: 1.11.50.05.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: xxxxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxx
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4010000
(bootloader) cidnum: VODAP102
(bootloader) battery-status: good
(bootloader) battery-voltage: 4005mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-64bedd38
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
I tried several S4 RUUs, european ones gave me error 131, Vodafone UK gave error 155 (the cellphone was bought in Italy).
What I did before executing the RUU exe(s) was just locking the bootloader. I think that probably installing ROMs in the time (the cellphone belongs to a friend of mine, so I don't know what was installed before) may have somewhat changed hboot (and/or radio) version, and now I can't find a RUU matching mine. Now i can only access the bootloader (I think the previous custom recovery is gone). I managed to access recovery by unlocking again the bootloader, but I can't mount any partition from the recovery (which is the main problem that lead me to decide to get back to stock.
What are my chances to return to HTC stock?
I have the same problem
Hi mate, I'm italian too. I suggest you to get S-Off (it's easy enough now with the brand new tools), change cid with fastboot command to HTC__001 and flash latest JB 4.1 european RUU. It's pretty easy
addsfsds said:
Hi mate, I'm italian too. I suggest you to get S-Off (it's easy enough now with the brand new tools), change cid with fastboot command to HTC__001 and flash latest JB 4.1 european RUU. It's pretty easy
Click to expand...
Click to collapse
I am very new to htc rooting and other stuff. kindly provide stepwise procedure with links to the tools and appropriate RUU
I have tried hit & trial but i am unable to get to stock
hasanalikhattak said:
I am very new to htc rooting and other stuff. kindly provide stepwise procedure with links to the tools and appropriate RUU
I have tried hit & trial but i am unable to get to stock
Click to expand...
Click to collapse
Dude give a quick look around, all the guides are here! or come to androidiani.com to get italian translated guides and support!
Hello, I'm located in Ontario Canada, with Telus and I need to return my rooted HTC One m7 back to HTC (through Telus) for warranty repairs due to a faulty top speaker and phone mic.
Every RUU.exe I try fails with "error 158" and I've tryed even with S-OFF and a whole bunch of other crap....
Basically here's my info:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.20.3263.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.661.8
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid:
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: TELUS001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4073mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
If anyone can grab me the correct RUU.exe I would even pay you via PayPal.
I'm desperate as my warranty ends April 28th 2014
Or just get me back to stock where I can OTA update and it would be "LOCKED" "S-ON" and no "Security Warning"/"TAMPERED" in the boot-loader.
Currently running Android Revolution HD Version 62.0 <-- love by the way.
Currently have "TAMPERED" "UNLOCKED" "S-ON"
sarktheshark said:
Hello, I'm located in Ontario Canada, with Telus and I need to return my rooted HTC One m7 back to HTC (through Telus) for warranty repairs due to a faulty top speaker and phone mic.
Every RUU.exe I try fails with "error 158" and I've tryed even with S-OFF and a whole bunch of other crap....
Basically here's my info:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.20.3263.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.661.8
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid:
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: TELUS001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4073mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
If anyone can grab me the correct RUU.exe I would even pay you via PayPal.
I'm desperate as my warranty ends April 28th 2014
Or just get me back to stock where I can OTA update and it would be "LOCKED" "S-ON" and no "Security Warning"/"TAMPERED" in the boot-loader.
Currently running Android Revolution HD Version 62.0 <-- love by the way.
Currently have "TAMPERED" "UNLOCKED" "S-ON"
Click to expand...
Click to collapse
Thats easy --> LINK
LS.xD said:
Thats easy --> LINK
Click to expand...
Click to collapse
Yeah it didn't work
Here are some pics:
sarktheshark said:
Yeah it didn't work
Here are some pics:
Click to expand...
Click to collapse
If you want a fast solution install Teamviewer and i'll fix it.
If you want it on your own:
-flash stock recovery contained in the RUU before installing RUU
-relock bootloader
-uninstall HTC Sync and all other software affecting USB connection, Samsung KIES and so on
-check if device is shown up in device manager correctly
-run RUU as admin
-close running adb instances
-...
It will work if you do right as its the 100% matching RUU for your device/firmware
LS.xD said:
If you want a fast solution install Teamviewer and i'll fix it.
If you want it on your own:
-flash stock recovery contained in the RUU before installing RUU
-relock bootloader
-uninstall HTC Sync and all other software affecting USB connection, Samsung KIES and so on
-check if device is shown up in device manager correctly
-run RUU as admin
-close running adb instances
-...
It will work if you do right as its the 100% matching RUU for your device/firmware
Click to expand...
Click to collapse
What is teamviewer?
Will you have access to my pc?
sarktheshark said:
What is teamviewer?
Will you have access to my pc?
Click to expand...
Click to collapse
You got it No matter if you don't like to. Just check all points i posted recently and it should work
LS.xD said:
You got it No matter if you don't like to. Just check all points i posted recently and it should work
Click to expand...
Click to collapse
Ok so can you do these easily via teamviewer?
sarktheshark said:
Ok so can you do these easily via teamviewer?
Click to expand...
Click to collapse
Think so After installing it you get a id+password. thats needed to connect. Just fixed a m7 this way some hours ago.
LS.xD said:
Think so After installing it you get a id+password. thats needed to connect. Just fixed a m7 this way some hours ago.
Click to expand...
Click to collapse
Ok, I'll pm u
sarktheshark said:
Ok, I'll pm u
Click to expand...
Click to collapse
You can read it here --> LINK
Can we proceed?
Sent from my beloved HTC One S using (most time buggy) Tapatalk
htc one m7_ul
LS.xD said:
Can we proceed?
Sent from my beloved HTC One S using (most time buggy) Tapatalk
Click to expand...
Click to collapse
pls help! im stuck on HTC screen on my htc one after i flash ARHD 62.,any help would be appreciated much...thanks!
josemanuelvalles28 said:
pls help! im stuck on HTC screen on my htc one after i flash ARHD 62.,any help would be appreciated much...thanks!
Click to expand...
Click to collapse
Solved?
I can't find RUU file
LS.xD said:
Solved?
Click to expand...
Click to collapse
Can you help me? I also can't find RUU file for my HTC. And can you give me some instruction how to use correctly RUU ??
version: 0.5
version-bootloader: 1.57.0000
version-baseband: 4A.26.3263.05
version-cpld: None
version-microp: None
version-main: 4.24.69.5
version-misc: PVT SHIP S-ON
serialno: FA382W903337
imei: ----------------
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: ORANGB10
battery-status: good
battery-voltage: 4266mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-660ef031
hbootpreupdate: 11
gencheckpt: 0
I have unlock bootloader, S-ON and TAMPERED flag
I have problem with vibractions and i would like to send my phone for warrant
Please help me
hi i'm having an htc one s
Tampered
Unlocked
Vle PVT SHIP S-ON RL
HBOOT 2.15.0000
RADIO-1.13.50.05.31
OPEN DSP -V31.1.0.45.0815
EMMC-BOOT
and i try to flash official rom :
RUU_VILLEC2_U_ICS_40_HTC_Europe_1.11.401.110_Radio_16.12.20.02U_16.05.20.16_M2_release_263510_signed
RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4
RUU_Ville_U_ICS_40_S_HTC_Europe_2.31.401.5
it doesn't work wich version should i use the phone has a logo of t-mobile .
thanks
What's your CID? You need a RUU matching your CID
Sent from my beloved HTC One S using (most time buggy) Tapatalk
there is no cid mentioned.....
LS.xD said:
What's your CID? You need a RUU matching your CID
Sent from my beloved HTC One S using (most time buggy) Tapatalk
Click to expand...
Click to collapse
c.vadim said:
there is no cid mentioned.....
Click to expand...
Click to collapse
Connect your phone in fastboot mode. Open CMD and type "fastboot getvar all" as it will show you full phone info.
BTW why you need the RUU, have bricked the device?
yes phone is brick hanging on logo
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.15.0000
(bootloader) version-baseband: 1.13.50.05.31
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT26HW401400
(bootloader) imei: 359902043656481
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4011000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 3890mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-64bedd38
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
LS.xD said:
Connect your phone in fastboot mode. Open CMD and type "fastboot getvar all" as it will show you full phone info.
BTW why you need the RUU, have bricked the device?
Click to expand...
Click to collapse
You need the TMOUS 3.14 RUU. But Androidruu.com is down at the moment. You'll have to way a while until the servers are online again.
You can flash this firmware.zip --> LINK
and install a custom rom if you don't want to wait.
can i write that firmware by TWRP ?
LS.xD said:
You need the TMOUS 3.14 RUU. But Androidruu.com is down at the moment. You'll have to way a while until the servers are online again.
You can flash this firmware.zip --> LINK
and install a custom rom if you don't want to wait.
Click to expand...
Click to collapse
No. You can flash it using fastboot commands
Sent from my beloved HTC One S using (most time buggy) Tapatalk
Androidruu.com it's back but i can't find TMOUS 3.14 RUU. other source?
LS.xD said:
You need the TMOUS 3.14 RUU. But Androidruu.com is down at the moment. You'll have to way a while until the servers are online again.
You can flash this firmware.zip --> LINK
and install a custom rom if you don't want to wait.
Click to expand...
Click to collapse
c.vadim said:
Androidruu.com it's back but i can't find TMOUS 3.14 RUU. other source?
Click to expand...
Click to collapse
Here it is on Androidruu.com --> TMOUS 3.14
Error 155 Unknown error
"The Rom update utility cnnot update your Android phone.
Please get the coreect ROM Update Utility and try again.
any solution ?
You need to relock the bootloader before running the RUU
Sent from my beloved HTC One S using (most time buggy) Tapatalk
done, thanks for your help. ... if i have another one new and i want to change the languages what should i do ?
LS.xD said:
You need to relock the bootloader before running the RUU
Sent from my beloved HTC One S using (most time buggy) Tapatalk
Click to expand...
Click to collapse
after sofware phone powers on and works ok... but in conversation it has no sound
c.vadim said:
done, thanks for your help. ... if i have another one new and i want to change the languages what should i do ?
Click to expand...
Click to collapse
Hi
Can you tell me from this output which shipped firmware should I try to revive one HTC one s which just hangs at HTC logo?
Code:
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.09.0001
(bootloader) version-baseband: 16.05.20.16_M2
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.11.401.110
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH264W402222
(bootloader) imei: 352762055720535
(bootloader) product: villec2
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PJ4020000
(bootloader) cidnum: HTC__102
(bootloader) battery-status: good
(bootloader) battery-voltage: 3823mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: f616909f
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.484s
LS.xD said:
Connect your phone in fastboot mode. Open CMD and type "fastboot getvar all" as it will show you full phone info.
BTW why you need the RUU, have bricked the device?
Click to expand...
Click to collapse
HI Guys
So my mate's phone won't boot up and I'd really appreciate some assistance. The last thing I did was unlock the phone via htcdev. But that's all I could do. Now I can't flash a recovery (I've tried a few) because I get an IMAGE UPDATE ERROR. I've also received a "SIGNATURE VERIFY FAIL" error.
Also, adb won't recognise my device but fastboot does.
What I'm trying to do is install a custom rom because my mate was complaining that his phone was slow and a bit laggy. I sold the phone to him in the first place so I've taken it upon myself to fix it.
Thanks guys, let me know if you need any further info.
CJ
First of all, we need some information about your phone.
I need : what kind(k2u, k2ul and so on)
Then what you have already done.
Then the other things (best of all you copy all information from your boot loader)
Edit: okay skript point 2 xD
Kreumadragon
Thanks for getting back to me.
Here's the information you've requested.
UNLOCKED
K2_ul PVT SHIP S-ON RL
HBOOT-2.21.0000
Radio-1.18.40a.00.05
openDSP-v13.2.0268.0620
OS-3.12.980.10
eMMC-boot 1024MB
Jul 2014
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.21.0000
(bootloader) version-baseband: 1.18.40a.00.05
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.12.980.10
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT2BWTP01724
(bootloader) imei: xxxxxxxxxxxxx
(bootloader) meid:
(bootloader) product: k2_ul
(bootloader) platform: HBOOT-8930
(bootloader) modelid: PL8015000
(bootloader) cidnum: OPTUS001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4330mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-2bb255c2
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.100s
Let me know if you need any further information.
With regards to what I have already done, I tried to flash TWRP recovery but I got an image update error.
Mhh do you flash the right TWRP?
And use fastboot flash recovery *recovery name*?
Do you have any data's to loose?
Kreumadragon
yeah I flashed a few different TWRPs and none of them worked.. if there is a specific one and if you have a link, I could try again?
nope i don't need any data to lose. I have removed the sd card. Thanks again.
Anyone? Still having no luck with this phone.
Please test (if you want) the cwm recovery. Link:
http://forum.xda-developers.com/showthread.php?p=37075457
If this doesn't work flash a ruu and try again
Kreumadragon
There is no RUU out which will work and also the cwm is outdated.
How did you flash recovery?
Use the one i recommended in my index thread. This should work on your hboot.
An other option is to get s off and flash it via pl**img.zip isn't it?
Kreumadragon
You need a working OS for S-off. Not sure if that is working here.
@Old
You have s off, haven't you?
And I get s off with hboot 2.21
Kreumadragon
I don't have One SV anymore.
Rumrunner works on hboot 2.21.
He says that he didn't have data's to loose
theoretically you can create an ........IMG.zip file with all files a ruu use, only the recovery is changed? Think I can make one but first want to read what you think(old)
Kreumadragon
As long as he is S-on you don't need to make anything.
Right now he can only flash signed firmware by HTC this way.
Okay, thx I don't know
Actually no ruu for any kind of k2ul?
Kreumadragon
Only one. And you must be S-off or on ICS to use that.
@CJ_
Do you have test old.s method?
If this doesn't work, you probably need SOff.
Kreumadragon
Hi old.splatterhand, to answer your question, I flashed the latest TWRP recovery (2.8. something) but I got the following IMAGE UPDATE ERROR. Will try the ones in your index and report back.
Thanks for your help guys.
Will try it now... If that doesn't work, how do I get S-Off when I can't do anything with the phone?