Database Info

Stay in Hboot

Please Help me
I want to Flash shiped
RUU_Saga_HTC_Europe_1.47.401.4_Radio_20.28I.30.085AU_3805.06.02.03_M_release_199410_signed
and when i run it after som step it goes to hboot and in the pc it says customer id error ERROR 131
and say my cid have error or something like that
i try
RUU_Saga_S_HTC_Europe_2.10.401.8_Radio_20.4801.30.0822U_3822.10.08.04_M_release_225161_signed
but the same problem.
Iam in hboot and recovery dont work and it back to hboot
i have ******Security warning****** in top of screen
in adb when i type: fastboot devices it says
SH18NTJ02513 fastboot
and by fastboot getvar all
it says
C:\Users\MMMS>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 0.98.0002
(bootloader) version-baseband: 3805.06.02.03_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.27.405.6
(bootloader) serialno: SH18NTJ02513
(bootloader) imei: 358967044858668
(bootloader) product: saga
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PG8810000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 3979mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 0e35ea5b
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
all: Done!
what shood i do. please help

ayene said:
Please Help me
I want to Flash shiped
RUU_Saga_HTC_Europe_1.47.401.4_Radio_20.28I.30.085AU_3805.06.02.03_M_release_199410_signed
and when i run it after som step it goes to hboot and in the pc it says customer id error ERROR 131
and say my cid have error or something like that
i try
RUU_Saga_S_HTC_Europe_2.10.401.8_Radio_20.4801.30.0822U_3822.10.08.04_M_release_225161_signed
but the same problem.
Iam in hboot and recovery dont work and it back to hboot
i have ******Security warning****** in top of screen
in adb when i type: fastboot devices it says
SH18NTJ02513 fastboot
and by fastboot getvar all
it says
C:\Users\MMMS>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 0.98.0002
(bootloader) version-baseband: 3805.06.02.03_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.27.405.6
(bootloader) serialno: SH18NTJ02513
(bootloader) imei: 358967044858668
(bootloader) product: saga
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PG8810000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 3979mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 0e35ea5b
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
all: Done!
what shood i do. please help
Click to expand...
Click to collapse
Create a goldcard and then try flash the RUU again.

tpbklake said:
Create a goldcard and then try flash the RUU again.
Click to expand...
Click to collapse
i cant go to my rom and stay in hboot.
how can i make gold card without going to rom?

Odd, your cidnum is HTC__J15, the only RUU that has that number is
RUU_Saga_HTC_Europe_1.28.401.1_Radio_20.28b.30.0805U_38.03.02.11_M_release_177977_signed
And since your misc-version is 1.27.405.6 that RUU should flash.
I checked
RUU_Saga_HTC_Europe_1.47.401.4_Radio_20.28I.30.085AU_3805.06.02.03_M_release_199410_signed
RUU_Saga_HTC_Europe_2.10.401.5_Radio_20.4801.30.0822U_3822.10.08.04_M_release_219480_signed
RUU_Saga_HTC_Europe_2.10.401.8_Radio_20.4801.30.0822U_3822.10.08.04_M_release_225161_signed.exe
And they don't have that cidnum.

foX2delta said:
Odd, your cidnum is HTC__J15, the only RUU that has that number is
RUU_Saga_HTC_Europe_1.28.401.1_Radio_20.28b.30.0805U_38.03.02.11_M_release_177977_signed
And since your misc-version is 1.27.405.6 that RUU should flash.
I checked
RUU_Saga_HTC_Europe_1.47.401.4_Radio_20.28I.30.085AU_3805.06.02.03_M_release_199410_signed
RUU_Saga_HTC_Europe_2.10.401.5_Radio_20.4801.30.0822U_3822.10.08.04_M_release_219480_signed
RUU_Saga_HTC_Europe_2.10.401.8_Radio_20.4801.30.0822U_3822.10.08.04_M_release_225161_signed.exe
And they don't have that cidnum.
Click to expand...
Click to collapse
u mean if I flash it will be ok and I dont need gold card?

Its worth a try, I personalty think it will work.
At the end of the day its worth a try, it has merit.

foX2delta said:
Its worth a try, I personalty think it will work.
At the end of the day its worth a try, it has merit.
Click to expand...
Click to collapse
yes yes yes yes. it worked. U R nice man.
just how could i khnow the cid code of e rom?
and can i change my cid ofter s-off and reinstall other ruu?

When you extract the rom.zip (run RUU and go to the temp folder for rom.zip) inside the android-info.txt file.
Yes you can change your cid once you have s-offed and then install the RUU of choice (thats if you like being s-on and stock.
However you better make a goldcard just incase and if I were you i'd s-off and flash sense 3 roms if thats what you want.

Same Problem
Hey,
I have same problem and i have not fixed yet.
Here is some solution about making goldcard, maybe it can help.
And this is my subject follow it maybe somebody help me first..
good luck.

Why not use custom roms or at least pre rooted stock roms?!
Sent from my HTC Desire S using xda premium

Please help! Urgent!

My Sensation is messed up. Only ROMs with the ville c2 1.11 base boot up, and then it tells me "Unfortunately, the process com.android.phone has stopped.", so I don't have data. Anything with the 3.x or 1.x base for the sensation doesn't work. I need my phone to work.

Do you superwipe between ROMs?

Yes, and even stock roms, flashed from the bootloader don't work.

Hitorijanae said:
Yes, and even stock roms, flashed from the bootloader don't work.
Click to expand...
Click to collapse
From 4ext (if you have it) wipe all but SD - sometimes superwipe isn't enough.
Plus ensure your Radio/firmware are OK?

mrew42 said:
From 4ext (if you have it) wipe all but SD - sometimes superwipe isn't enough.
Plus ensure your Radio/firmware are OK?
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.27.1100
(bootloader) version-baseband: 11.23.3504.07_M2
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.32.531.14
(bootloader) serialno: SH18ET500850
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5810000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3809mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 617f0a98
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.483s
That's my fastboot getvar all.

All looks good, so try the 4ext format and then install your ROM again.

mrew42 said:
All looks good, so try the 4ext format and then install your ROM again.
Click to expand...
Click to collapse
Just formatted using 4EXT, and flashed ARHD 6.7.0. Still not booting past the beats audio logo.

op can you edit your previous post ..where you did a "fastboot getvar all" output ...can you mask the imei
can you try reflashing the 3.33 universal firmware ..verify the md5 of it too..and check again
EDIT: get the firmware from this thread

ganeshp said:
op can you edit your previous post ..where you did a "fastboot getvar all" output ...can you mask the imei
can you try reflashing the 3.33 universal firmware ..verify the md5 of it too..and check again
EDIT: get the firmware from this thread
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.27.1100
(bootloader) version-baseband: 11.24A.3504.31_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.33.401.106
(bootloader) serialno: SH18ET500850
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5810000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3790mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 617f0a98
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
---------------------------------------------------------------------------------
New fastboot getvar all

I would even go back to GB if that would fix it, but I flashed the 1.50 ruu and I was stuck on the splash screen.

after flashing the new firmware ..did you try to boot up ?
and still you got stuck at boot screen ?
as you are SOFF ..try the ICS RUU latest Europe 3.33 one

Yes, I am s off, and I'll try tomorrow morning. At least Cyanogenmod still works perfectly.
Sent from my HTC Sensation using xda app-developers app

Will the Europe RUU work on my tmous Sensation?
Sent from my HTC Sensation using xda app-developers app

Hitorijanae said:
Will the Europe RUU work on my tmous Sensation?
Sent from my HTC Sensation using xda app-developers app
Click to expand...
Click to collapse
yes ..you are supercid ..so any RUU will work ..afaik

ganeshp said:
yes ..you are supercid ..so any RUU will work ..afaik
Click to expand...
Click to collapse
K I'll try.

ganeshp said:
yes ..you are supercid ..so any RUU will work ..afaik
Click to expand...
Click to collapse
I was able to get gingerbread original RUU working, with logcats and adb access. Where should I go with this?
The RUU didn't work.

Hitorijanae said:
I was able to get gingerbread original RUU working, with logcats and adb access. Where should I go with this?
The RUU didn't work.
Click to expand...
Click to collapse
what do you mean by RUU didnt work ?
can you tell me the error

ganeshp said:
what do you mean by RUU didnt work ?
can you tell me the error
Click to expand...
Click to collapse
I should've clarified better, the phone got to the bootanimation and stopped.

Hitorijanae said:
I should've clarified better, the phone got to the bootanimation and stopped.
Click to expand...
Click to collapse
hmm try the TMOUS RUU then
TMOUS GB RUU
TMOUS ICS RUU

Okay, it's downloading.

Can't find correct HTC One m7ul RUU.exe HELP

Hello, I'm located in Ontario Canada, with Telus and I need to return my rooted HTC One m7 back to HTC (through Telus) for warranty repairs due to a faulty top speaker and phone mic.
Every RUU.exe I try fails with "error 158" and I've tryed even with S-OFF and a whole bunch of other crap....
Basically here's my info:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.20.3263.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.661.8
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid:
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: TELUS001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4073mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
If anyone can grab me the correct RUU.exe I would even pay you via PayPal.
I'm desperate as my warranty ends April 28th 2014
Or just get me back to stock where I can OTA update and it would be "LOCKED" "S-ON" and no "Security Warning"/"TAMPERED" in the boot-loader.
Currently running Android Revolution HD Version 62.0 <-- love by the way.
Currently have "TAMPERED" "UNLOCKED" "S-ON"

sarktheshark said:
Hello, I'm located in Ontario Canada, with Telus and I need to return my rooted HTC One m7 back to HTC (through Telus) for warranty repairs due to a faulty top speaker and phone mic.
Every RUU.exe I try fails with "error 158" and I've tryed even with S-OFF and a whole bunch of other crap....
Basically here's my info:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.20.3263.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.661.8
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid:
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: TELUS001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4073mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
If anyone can grab me the correct RUU.exe I would even pay you via PayPal.
I'm desperate as my warranty ends April 28th 2014
Or just get me back to stock where I can OTA update and it would be "LOCKED" "S-ON" and no "Security Warning"/"TAMPERED" in the boot-loader.
Currently running Android Revolution HD Version 62.0 <-- love by the way.
Currently have "TAMPERED" "UNLOCKED" "S-ON"
Click to expand...
Click to collapse
Thats easy --> LINK

LS.xD said:
Thats easy --> LINK
Click to expand...
Click to collapse
Yeah it didn't work
Here are some pics:

sarktheshark said:
Yeah it didn't work
Here are some pics:
Click to expand...
Click to collapse
If you want a fast solution install Teamviewer and i'll fix it.
If you want it on your own:
-flash stock recovery contained in the RUU before installing RUU
-relock bootloader
-uninstall HTC Sync and all other software affecting USB connection, Samsung KIES and so on
-check if device is shown up in device manager correctly
-run RUU as admin
-close running adb instances
-...
It will work if you do right as its the 100% matching RUU for your device/firmware

LS.xD said:
If you want a fast solution install Teamviewer and i'll fix it.
If you want it on your own:
-flash stock recovery contained in the RUU before installing RUU
-relock bootloader
-uninstall HTC Sync and all other software affecting USB connection, Samsung KIES and so on
-check if device is shown up in device manager correctly
-run RUU as admin
-close running adb instances
-...
It will work if you do right as its the 100% matching RUU for your device/firmware
Click to expand...
Click to collapse
What is teamviewer?
Will you have access to my pc?

sarktheshark said:
What is teamviewer?
Will you have access to my pc?
Click to expand...
Click to collapse
You got it No matter if you don't like to. Just check all points i posted recently and it should work

LS.xD said:
You got it No matter if you don't like to. Just check all points i posted recently and it should work
Click to expand...
Click to collapse
Ok so can you do these easily via teamviewer?

sarktheshark said:
Ok so can you do these easily via teamviewer?
Click to expand...
Click to collapse
Think so After installing it you get a id+password. thats needed to connect. Just fixed a m7 this way some hours ago.

LS.xD said:
Think so After installing it you get a id+password. thats needed to connect. Just fixed a m7 this way some hours ago.
Click to expand...
Click to collapse
Ok, I'll pm u

sarktheshark said:
Ok, I'll pm u
Click to expand...
Click to collapse
You can read it here --> LINK

Can we proceed?
Sent from my beloved HTC One S using (most time buggy) Tapatalk

htc one m7_ul
LS.xD said:
Can we proceed?
Sent from my beloved HTC One S using (most time buggy) Tapatalk
Click to expand...
Click to collapse
pls help! im stuck on HTC screen on my htc one after i flash ARHD 62.,any help would be appreciated much...thanks!

josemanuelvalles28 said:
pls help! im stuck on HTC screen on my htc one after i flash ARHD 62.,any help would be appreciated much...thanks!
Click to expand...
Click to collapse
Solved?

I can't find RUU file
LS.xD said:
Solved?
Click to expand...
Click to collapse
Can you help me? I also can't find RUU file for my HTC. And can you give me some instruction how to use correctly RUU ??
version: 0.5
version-bootloader: 1.57.0000
version-baseband: 4A.26.3263.05
version-cpld: None
version-microp: None
version-main: 4.24.69.5
version-misc: PVT SHIP S-ON
serialno: FA382W903337
imei: ----------------
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: ORANGB10
battery-status: good
battery-voltage: 4266mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-660ef031
hbootpreupdate: 11
gencheckpt: 0
I have unlock bootloader, S-ON and TAMPERED flag
I have problem with vibractions and i would like to send my phone for warrant
Please help me

[Q] Can't boot any ROMs based on Flemmards kernel

So, this is a huge problem for me. I'm running S-OFF with hboot 1.27.1111, and whatever radio was in the latest RUU. However, I can't boot any of the new 3.4kernel based ROMs. The Logcats I was able to capture are here: http://forum.xda-developers.com/showthread.php?p=51959307#post51959307
Anyone have any ideas? I'm desperate for CM11.

Hi,
What Recovery did you use to flash???

blogodoblogodo said:
Hi,
What Recovery did you use to flash???
Click to expand...
Click to collapse
4Ext 1.0.0.6 RC1, The latest one

Try fastboot getvar all
then we will see if there is a problem.
Maybe with another Hboot version???
Firmware 3.33 Universal:
Flash this in Bootloader Mode : http://d-h.st/SuC
MD5: 07cc2a2ea4473e8fe8d6fe844c4020a1
then get the latest RIL
http://forum.xda-developers.com/showpost.php?p=26593365&postcount=2
Then try to boot

blogodoblogodo said:
Try fastboot getvar all
then we will see if there is a problem.
Maybe with another Hboot version???
Firmware 3.33 Universal:
Flash this in Bootloader Mode : http://d-h.st/SuC
MD5: 07cc2a2ea4473e8fe8d6fe844c4020a1
then get the latest RIL
http://forum.xda-developers.com/showpost.php?p=26593365&postcount=2
Then try to boot
Click to expand...
Click to collapse
The output of fastboot:
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.27.1100
(bootloader) version-baseband: 11.24A.3504.31_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.33.401.106
(bootloader) serialno: HT15XXXXXXXXXXXXXXX
(bootloader) imei: 356XXXXXXX
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813000
(bootloader) cidnum: HTC__E11
(bootloader) battery-status: good
(bootloader) battery-voltage: 4114mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 617f0a98
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Still doesn't boot succesfully, crashes on cm logo and restarts.

Your cidnum is not 1111111111 (i don't know how many "1" it got)
Maybe here
Gotcha!!!
And for the CID (so you can flash any ROM or RUU for latest radios and debranding)?
fastboot oem writecid 11111111 (to change CID)
fastboot reboot-bootloader (bootloader will reboot)
fastboot getvar cid (it will confirm your CID as 11111111
fastboot reboot (to reboot back in your current ROM)
Click to expand...
Click to collapse
From this thread
Flash the latest baseband too for better networking
Then try flashing ROM"s"

blogodoblogodo said:
Your cidnum is not 1111111111 (i don't how many "1" it got)
Maybe here
Gotcha!!!
From this thread
Click to expand...
Click to collapse
Alrighty, the CID is now supercid, but it still doesn't boot.

blogodoblogodo said:
Your cidnum is not 1111111111 (i don't know how many "1" it got)
Maybe here
Gotcha!!!
From this thread
Flash the latest baseband too for better networking
Then try flashing ROM"s"
Click to expand...
Click to collapse
I've done that now, still won't boot. I'm just gonna give up at this point.

ShadowCodeGaming said:
Alrighty, the CID is now supercid, but it still doesn't boot.
Click to expand...
Click to collapse
Wipe All for a clean install put the GApps and that's the end of the Nightmare ^^
Have a nice night... Back to home end of work day

blogodoblogodo said:
Wipe All for a clean install put the GApps and that's the end of the Nightmare ^^
Have a nice night... Back to home end of work day
Click to expand...
Click to collapse
I wiped it clean... Didn't change anything

My Fastboot getvar all:
INFOversion: 0.5
INFOversion-bootloader: 1.29.0000
INFOversion-baseband: N/A
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.33.401.106
INFOserialno: HTxxxxxxxxxx
INFOimei: 35xxxxxxxxxx
INFOproduct: pyramid
INFOplatform: HBOOT-8260
INFOmodelid: PG5813001
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 4065mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 705f86f6
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.488s
After all these flash could you write your new "Fastboot getvar all" please

I'm not sure, but I think it might be related to your hboot. Can you update your hboot to 1.29? I remember to have read somewhere that that would help.

flash the boot.img of the rom via fastboot command
fastboot flash boot boot.img

Sajito said:
I'm not sure, but I think it might be related to your hboot. Can you update your hboot to 1.29? I remember to have read somewhere that that would help.
Click to expand...
Click to collapse
Any link to it? Tried google but didn't find it.

ShadowCodeGaming said:
Any link to it? Tried google but didn't find it.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=21711303&postcount=2
Under HBoot 1.29.0000 Patch.

Allright, did the hboot patch and flashed boot.img manually, both made no difference
Sent from my Sense 5 powered HTC Sensation

ShadowCodeGaming said:
Allright, did the hboot patch and flashed boot.img manually, both made no difference
Sent from my Sense 5 powered HTC Sensation
Click to expand...
Click to collapse
Plz, Another getvar all.
Try this PacManRom

blogodoblogodo said:
Plz, Another getvar all.
Try this PacManRom
Click to expand...
Click to collapse
You'll get it as soon as I'm home
Sent from my Sense 5 powered HTC Sensation

ShadowCodeGaming said:
You'll get it as soon as I'm home
Sent from my Sense 5 powered HTC Sensation
Click to expand...
Click to collapse
Okéy see you

blogodoblogodo said:
Okéy see you
Click to expand...
Click to collapse
Here's the new getvar:
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.29.0000
(bootloader) version-baseband: 11.24A.3504.31_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.33.401.106
(bootloader) serialno: HT15XXXXXXXXXXXXX
(bootloader) imei: 356XXXXXXXXXXXX
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3909mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 705f86f6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.499s

my mobile dead please support me

my mobile suddenly don't accept any custom Rom keep hang on the white screen with word HTC
now i try to flash a new original Rom
RUU_Pyramid_HTC_ARA_1.45.415.5_Radio_10.56.9035.00U_10.14.9035.01_M_release_220005_signed
but it hang while flash it from the computer at 44%
any advice
please my mobile off more than 3 days

30 views with no answer
please support me

hemainsider said:
my mobile suddenly don't accept any custom Rom keep hang on the white screen with word HTC
now i try to flash a new original Rom
RUU_Pyramid_HTC_ARA_1.45.415.5_Radio_10.56.9035.00U_10.14.9035.01_M_release_220005_signed
but it hang while flash it from the computer at 44%
any advice
please my mobile off more than 3 days
Click to expand...
Click to collapse
can you post your bootloader details?
don't show your imei and s/n

unlocked
pyramid pvt ship s-off rL
hboot-1.18.0000
radio-11.24A.3504.31_M
eMMC-boot
aug 2 2011,22:35:52

not the mobile on the white screen with this details
and 4 marks in the 4 corners

hemainsider said:
unlocked
pyramid pvt ship s-off rL
hboot-1.18.0000
radio-11.24A.3504.31_M
eMMC-boot
aug 2 2011,22:35:52
Click to expand...
Click to collapse
hemainsider said:
not the mobile on the white screen with this details
and 4 marks in the 4 corners
Click to expand...
Click to collapse
my mistake i meant post the output from this command
fastboot getvar all

the phone now hang like the photo
http://forum.xda-developers.com/attachment.php?attachmentid=1116047&d=1339190429

(bootloader) version: 0.5
(bootloader) version-bootloader: 1.17.0011
(bootloader) version-baseband: 11.24A.3504.31_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.33.401.106
(bootloader) serialno:
(bootloader) imei:
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3800mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: 92e53710
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.057s

hemainsider said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.17.0011
(bootloader) version-baseband: 11.24A.3504.31_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.33.401.106
(bootloader) serialno:
(bootloader) imei:
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3800mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: 92e53710
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.057s
Click to expand...
Click to collapse
try this ruu.exe
http://shipped-roms.com/download.ph...0U_11.24A.3504.31_M_release_280871_signed.exe

i am sorry it fail it hang in at 46%
i am afraid that something happen in the hardware
u r my only hope no one answer me

Relock ur bootloader and try the ruu again.
To relock, type this fastboot command
fastboot oem lock

hemainsider said:
i am sorry it fail it hang in at 46%
i am afraid that something happen in the hardware
u r my only hope no one answer me
Click to expand...
Click to collapse
ok let's try this
change the cid to HTC__001
then install again the ruu

jmcclue said:
Relock ur bootloader and try the ruu again.
To relock, type this fastboot command
fastboot oem lock
Click to expand...
Click to collapse
i am sorry i tried and it stuck at 39%
i don't know why this happen
any another solution

rzr86 said:
ok let's try this
change the cid to HTC__001
then install again the ruu
Click to expand...
Click to collapse
sorry please tell me how to do that

hemainsider said:
sorry please tell me how to do that
Click to expand...
Click to collapse
fastboot oem writecid <<the cid>>
fastboot reboot bootloader
fastboot getvar cid (to confirm the cid)

What recovery did u have on ur phone?

jmcclue said:
What recovery did u have on ur phone?
Click to expand...
Click to collapse
before what happen i used
4eXT Recovery Touch v1.0.0.6_RC1

hemainsider said:
before what happen i used
4eXT Recovery Touch v1.0.0.6_RC1
Click to expand...
Click to collapse
Oh rite, thought that if u had twrp recovery it mite have corrupted a partition coz its happened to many phones already.
U should try what @rzr86 said above, changing ur cid back to what it was before supercid. It has work a few times before so its worth a shot.

i tried and it hang at 39%
i am afraid that i can 't use my mobile again

jmcclue said:
Oh rite, thought that if u had twrp recovery it mite have corrupted a partition coz its happened to many phones already.
U should try what @rzr86 said above, changing ur cid back to what it was before supercid. It has work a few times before so its worth a shot.
Click to expand...
Click to collapse
I do it and change my cid It became now HTC__001
Nothing happen hang again when try to run the RUU