My Sensation is messed up. Only ROMs with the ville c2 1.11 base boot up, and then it tells me "Unfortunately, the process com.android.phone has stopped.", so I don't have data. Anything with the 3.x or 1.x base for the sensation doesn't work. I need my phone to work.
Do you superwipe between ROMs?
Yes, and even stock roms, flashed from the bootloader don't work.
Hitorijanae said:
Yes, and even stock roms, flashed from the bootloader don't work.
Click to expand...
Click to collapse
From 4ext (if you have it) wipe all but SD - sometimes superwipe isn't enough.
Plus ensure your Radio/firmware are OK?
mrew42 said:
From 4ext (if you have it) wipe all but SD - sometimes superwipe isn't enough.
Plus ensure your Radio/firmware are OK?
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.27.1100
(bootloader) version-baseband: 11.23.3504.07_M2
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.32.531.14
(bootloader) serialno: SH18ET500850
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5810000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3809mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 617f0a98
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.483s
That's my fastboot getvar all.
All looks good, so try the 4ext format and then install your ROM again.
mrew42 said:
All looks good, so try the 4ext format and then install your ROM again.
Click to expand...
Click to collapse
Just formatted using 4EXT, and flashed ARHD 6.7.0. Still not booting past the beats audio logo.
op can you edit your previous post ..where you did a "fastboot getvar all" output ...can you mask the imei
can you try reflashing the 3.33 universal firmware ..verify the md5 of it too..and check again
EDIT: get the firmware from this thread
ganeshp said:
op can you edit your previous post ..where you did a "fastboot getvar all" output ...can you mask the imei
can you try reflashing the 3.33 universal firmware ..verify the md5 of it too..and check again
EDIT: get the firmware from this thread
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.27.1100
(bootloader) version-baseband: 11.24A.3504.31_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.33.401.106
(bootloader) serialno: SH18ET500850
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5810000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3790mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 617f0a98
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
---------------------------------------------------------------------------------
New fastboot getvar all
I would even go back to GB if that would fix it, but I flashed the 1.50 ruu and I was stuck on the splash screen.
after flashing the new firmware ..did you try to boot up ?
and still you got stuck at boot screen ?
as you are SOFF ..try the ICS RUU latest Europe 3.33 one
Yes, I am s off, and I'll try tomorrow morning. At least Cyanogenmod still works perfectly.
Sent from my HTC Sensation using xda app-developers app
Will the Europe RUU work on my tmous Sensation?
Sent from my HTC Sensation using xda app-developers app
Hitorijanae said:
Will the Europe RUU work on my tmous Sensation?
Sent from my HTC Sensation using xda app-developers app
Click to expand...
Click to collapse
yes ..you are supercid ..so any RUU will work ..afaik
ganeshp said:
yes ..you are supercid ..so any RUU will work ..afaik
Click to expand...
Click to collapse
K I'll try.
ganeshp said:
yes ..you are supercid ..so any RUU will work ..afaik
Click to expand...
Click to collapse
I was able to get gingerbread original RUU working, with logcats and adb access. Where should I go with this?
The RUU didn't work.
Hitorijanae said:
I was able to get gingerbread original RUU working, with logcats and adb access. Where should I go with this?
The RUU didn't work.
Click to expand...
Click to collapse
what do you mean by RUU didnt work ?
can you tell me the error
ganeshp said:
what do you mean by RUU didnt work ?
can you tell me the error
Click to expand...
Click to collapse
I should've clarified better, the phone got to the bootanimation and stopped.
Hitorijanae said:
I should've clarified better, the phone got to the bootanimation and stopped.
Click to expand...
Click to collapse
hmm try the TMOUS RUU then
TMOUS GB RUU
TMOUS ICS RUU
Okay, it's downloading.
Related
Please Help me
I want to Flash shiped
RUU_Saga_HTC_Europe_1.47.401.4_Radio_20.28I.30.085AU_3805.06.02.03_M_release_199410_signed
and when i run it after som step it goes to hboot and in the pc it says customer id error ERROR 131
and say my cid have error or something like that
i try
RUU_Saga_S_HTC_Europe_2.10.401.8_Radio_20.4801.30.0822U_3822.10.08.04_M_release_225161_signed
but the same problem.
Iam in hboot and recovery dont work and it back to hboot
i have ******Security warning****** in top of screen
in adb when i type: fastboot devices it says
SH18NTJ02513 fastboot
and by fastboot getvar all
it says
C:\Users\MMMS>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 0.98.0002
(bootloader) version-baseband: 3805.06.02.03_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.27.405.6
(bootloader) serialno: SH18NTJ02513
(bootloader) imei: 358967044858668
(bootloader) product: saga
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PG8810000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 3979mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 0e35ea5b
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
all: Done!
what shood i do. please help
ayene said:
Please Help me
I want to Flash shiped
RUU_Saga_HTC_Europe_1.47.401.4_Radio_20.28I.30.085AU_3805.06.02.03_M_release_199410_signed
and when i run it after som step it goes to hboot and in the pc it says customer id error ERROR 131
and say my cid have error or something like that
i try
RUU_Saga_S_HTC_Europe_2.10.401.8_Radio_20.4801.30.0822U_3822.10.08.04_M_release_225161_signed
but the same problem.
Iam in hboot and recovery dont work and it back to hboot
i have ******Security warning****** in top of screen
in adb when i type: fastboot devices it says
SH18NTJ02513 fastboot
and by fastboot getvar all
it says
C:\Users\MMMS>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 0.98.0002
(bootloader) version-baseband: 3805.06.02.03_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.27.405.6
(bootloader) serialno: SH18NTJ02513
(bootloader) imei: 358967044858668
(bootloader) product: saga
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PG8810000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 3979mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 0e35ea5b
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
all: Done!
what shood i do. please help
Click to expand...
Click to collapse
Create a goldcard and then try flash the RUU again.
tpbklake said:
Create a goldcard and then try flash the RUU again.
Click to expand...
Click to collapse
i cant go to my rom and stay in hboot.
how can i make gold card without going to rom?
Odd, your cidnum is HTC__J15, the only RUU that has that number is
RUU_Saga_HTC_Europe_1.28.401.1_Radio_20.28b.30.0805U_38.03.02.11_M_release_177977_signed
And since your misc-version is 1.27.405.6 that RUU should flash.
I checked
RUU_Saga_HTC_Europe_1.47.401.4_Radio_20.28I.30.085AU_3805.06.02.03_M_release_199410_signed
RUU_Saga_HTC_Europe_2.10.401.5_Radio_20.4801.30.0822U_3822.10.08.04_M_release_219480_signed
RUU_Saga_HTC_Europe_2.10.401.8_Radio_20.4801.30.0822U_3822.10.08.04_M_release_225161_signed.exe
And they don't have that cidnum.
foX2delta said:
Odd, your cidnum is HTC__J15, the only RUU that has that number is
RUU_Saga_HTC_Europe_1.28.401.1_Radio_20.28b.30.0805U_38.03.02.11_M_release_177977_signed
And since your misc-version is 1.27.405.6 that RUU should flash.
I checked
RUU_Saga_HTC_Europe_1.47.401.4_Radio_20.28I.30.085AU_3805.06.02.03_M_release_199410_signed
RUU_Saga_HTC_Europe_2.10.401.5_Radio_20.4801.30.0822U_3822.10.08.04_M_release_219480_signed
RUU_Saga_HTC_Europe_2.10.401.8_Radio_20.4801.30.0822U_3822.10.08.04_M_release_225161_signed.exe
And they don't have that cidnum.
Click to expand...
Click to collapse
u mean if I flash it will be ok and I dont need gold card?
Its worth a try, I personalty think it will work.
At the end of the day its worth a try, it has merit.
foX2delta said:
Its worth a try, I personalty think it will work.
At the end of the day its worth a try, it has merit.
Click to expand...
Click to collapse
yes yes yes yes. it worked. U R nice man.
just how could i khnow the cid code of e rom?
and can i change my cid ofter s-off and reinstall other ruu?
When you extract the rom.zip (run RUU and go to the temp folder for rom.zip) inside the android-info.txt file.
Yes you can change your cid once you have s-offed and then install the RUU of choice (thats if you like being s-on and stock.
However you better make a goldcard just incase and if I were you i'd s-off and flash sense 3 roms if thats what you want.
Same Problem
Hey,
I have same problem and i have not fixed yet.
Here is some solution about making goldcard, maybe it can help.
And this is my subject follow it maybe somebody help me first..
good luck.
Why not use custom roms or at least pre rooted stock roms?!
Sent from my HTC Desire S using xda premium
So I have a tmobile htc one s but I bricked it kind of with the latest ruu and I'm s-on...
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.14.0005
(bootloader) version-baseband: 1.13.50.05.25
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: ****(I edited this out)
(bootloader) imei: ****(I edited this out)
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4011000
(bootloader) cidnum: T-MOBO10
(bootloader) battery-status: good
(bootloader) battery-voltage: 4156mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: 8be28a51
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Any suggestions for which ruu I should flash I'm assuming the tmobile one is the right ruu but it keeps giving me a customer id error so I'm thinking somewhere along the line I changed something that requires me to flash a diff ruu... s-off process or something like that.. Just a theory give me your feedback all is welcome. If I need tmobile to replace it should I just tell them that this was related to their latest update because I heard that there are a lot of customers with the same issue and if it was their fault I see no reason for me to suffer LOL.
tylerjholmgren said:
So I have a tmobile htc one s but I bricked it kind of with the latest ruu and I'm s-on...
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.14.0005
(bootloader) version-baseband: 1.13.50.05.25
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: ****(I edited this out)
(bootloader) imei: ****(I edited this out)
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4011000
(bootloader) cidnum: T-MOBO10
(bootloader) battery-status: good
(bootloader) battery-voltage: 4156mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: 8be28a51
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Any suggestions for which ruu I should flash I'm assuming the tmobile one is the right ruu but it keeps giving me a customer id error so I'm thinking somewhere along the line I changed something that requires me to flash a diff ruu... s-off process or something like that.. Just a theory give me your feedback all is welcome. If I need tmobile to replace it should I just tell them that this was related to their latest update because I heard that there are a lot of customers with the same issue and if it was their fault I see no reason for me to suffer LOL.
Click to expand...
Click to collapse
Which T-Mobile RUU? There are lots of T-Mobile RUUs for Netherlands and the UK, your customer ID is T-Mob010 you need a TMoUS one.
Sent from my HTC One S using Tapatalk 2
usaff22 said:
Which T-Mobile RUU? There are lots of T-Mobile RUUs for Netherlands and the UK, your customer ID is T-Mob010 you need a TMoUS one.
Sent from my HTC One S using Tapatalk 2
Click to expand...
Click to collapse
RUU_Ville_U_JB_45_S_TMOUS_3.14.531.11_Radio_1.13.50.05.31_10.30.50.08L_release_309489_signed_ICS_2.exe is the current ruu I've tried to flash and I've also tried 2.35 tmous ruu. All get stuck and give me customer id error.
tylerjholmgren said:
RUU_Ville_U_JB_45_S_TMOUS_3.14.531.11_Radio_1.13.50.05.31_10.30.50.08L_release_309489_signed_ICS_2.exe is the current ruu I've tried to flash and I've also tried 2.35 tmous ruu. All get stuck and give me customer id error.
Click to expand...
Click to collapse
I can't find a jb version for T-Mobile UK ruu
Sent from my HTC One S using xda premium
tr1gg3r84 said:
I can't find a jb version for T-Mobile UK ruu
Sent from my HTC One S using xda premium
Click to expand...
Click to collapse
There's none. Use a 1.78 RUU and do the OTA
Sent from my HTC One S using Tapatalk 4 Beta
usaff22 said:
There's none. Use a 1.78 RUU and do the OTA
Sent from my HTC One S using Tapatalk 4 Beta
Click to expand...
Click to collapse
I found a ruu I got from football awhile ago. but when I try to install it im getting a 155error I have used this ruu before but forgot what I did when I got that error last time. anyone help me on that?
---------- Post added at 02:45 PM ---------- Previous post was at 02:29 PM ----------
tr1gg3r84 said:
I found a ruu I got from football awhile ago. but when I try to install it im getting a 155error I have used this ruu before but forgot what I did when I got that error last time. anyone help me on that?
Click to expand...
Click to collapse
its a tmobile uk ics im sure, do I need a recovery stock img? isthat why I getting the error? if anyone got a ics stock recovery that be a help
hi i'm having an htc one s
Tampered
Unlocked
Vle PVT SHIP S-ON RL
HBOOT 2.15.0000
RADIO-1.13.50.05.31
OPEN DSP -V31.1.0.45.0815
EMMC-BOOT
and i try to flash official rom :
RUU_VILLEC2_U_ICS_40_HTC_Europe_1.11.401.110_Radio_16.12.20.02U_16.05.20.16_M2_release_263510_signed
RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4
RUU_Ville_U_ICS_40_S_HTC_Europe_2.31.401.5
it doesn't work wich version should i use the phone has a logo of t-mobile .
thanks
What's your CID? You need a RUU matching your CID
Sent from my beloved HTC One S using (most time buggy) Tapatalk
there is no cid mentioned.....
LS.xD said:
What's your CID? You need a RUU matching your CID
Sent from my beloved HTC One S using (most time buggy) Tapatalk
Click to expand...
Click to collapse
c.vadim said:
there is no cid mentioned.....
Click to expand...
Click to collapse
Connect your phone in fastboot mode. Open CMD and type "fastboot getvar all" as it will show you full phone info.
BTW why you need the RUU, have bricked the device?
yes phone is brick hanging on logo
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.15.0000
(bootloader) version-baseband: 1.13.50.05.31
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT26HW401400
(bootloader) imei: 359902043656481
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4011000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 3890mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-64bedd38
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
LS.xD said:
Connect your phone in fastboot mode. Open CMD and type "fastboot getvar all" as it will show you full phone info.
BTW why you need the RUU, have bricked the device?
Click to expand...
Click to collapse
You need the TMOUS 3.14 RUU. But Androidruu.com is down at the moment. You'll have to way a while until the servers are online again.
You can flash this firmware.zip --> LINK
and install a custom rom if you don't want to wait.
can i write that firmware by TWRP ?
LS.xD said:
You need the TMOUS 3.14 RUU. But Androidruu.com is down at the moment. You'll have to way a while until the servers are online again.
You can flash this firmware.zip --> LINK
and install a custom rom if you don't want to wait.
Click to expand...
Click to collapse
No. You can flash it using fastboot commands
Sent from my beloved HTC One S using (most time buggy) Tapatalk
Androidruu.com it's back but i can't find TMOUS 3.14 RUU. other source?
LS.xD said:
You need the TMOUS 3.14 RUU. But Androidruu.com is down at the moment. You'll have to way a while until the servers are online again.
You can flash this firmware.zip --> LINK
and install a custom rom if you don't want to wait.
Click to expand...
Click to collapse
c.vadim said:
Androidruu.com it's back but i can't find TMOUS 3.14 RUU. other source?
Click to expand...
Click to collapse
Here it is on Androidruu.com --> TMOUS 3.14
Error 155 Unknown error
"The Rom update utility cnnot update your Android phone.
Please get the coreect ROM Update Utility and try again.
any solution ?
You need to relock the bootloader before running the RUU
Sent from my beloved HTC One S using (most time buggy) Tapatalk
done, thanks for your help. ... if i have another one new and i want to change the languages what should i do ?
LS.xD said:
You need to relock the bootloader before running the RUU
Sent from my beloved HTC One S using (most time buggy) Tapatalk
Click to expand...
Click to collapse
after sofware phone powers on and works ok... but in conversation it has no sound
c.vadim said:
done, thanks for your help. ... if i have another one new and i want to change the languages what should i do ?
Click to expand...
Click to collapse
Hi
Can you tell me from this output which shipped firmware should I try to revive one HTC one s which just hangs at HTC logo?
Code:
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.09.0001
(bootloader) version-baseband: 16.05.20.16_M2
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.11.401.110
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH264W402222
(bootloader) imei: 352762055720535
(bootloader) product: villec2
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PJ4020000
(bootloader) cidnum: HTC__102
(bootloader) battery-status: good
(bootloader) battery-voltage: 3823mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: f616909f
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.484s
LS.xD said:
Connect your phone in fastboot mode. Open CMD and type "fastboot getvar all" as it will show you full phone info.
BTW why you need the RUU, have bricked the device?
Click to expand...
Click to collapse
So, this is a huge problem for me. I'm running S-OFF with hboot 1.27.1111, and whatever radio was in the latest RUU. However, I can't boot any of the new 3.4kernel based ROMs. The Logcats I was able to capture are here: http://forum.xda-developers.com/showthread.php?p=51959307#post51959307
Anyone have any ideas? I'm desperate for CM11.
Hi,
What Recovery did you use to flash???
blogodoblogodo said:
Hi,
What Recovery did you use to flash???
Click to expand...
Click to collapse
4Ext 1.0.0.6 RC1, The latest one
Try fastboot getvar all
then we will see if there is a problem.
Maybe with another Hboot version???
Firmware 3.33 Universal:
Flash this in Bootloader Mode : http://d-h.st/SuC
MD5: 07cc2a2ea4473e8fe8d6fe844c4020a1
then get the latest RIL
http://forum.xda-developers.com/showpost.php?p=26593365&postcount=2
Then try to boot
blogodoblogodo said:
Try fastboot getvar all
then we will see if there is a problem.
Maybe with another Hboot version???
Firmware 3.33 Universal:
Flash this in Bootloader Mode : http://d-h.st/SuC
MD5: 07cc2a2ea4473e8fe8d6fe844c4020a1
then get the latest RIL
http://forum.xda-developers.com/showpost.php?p=26593365&postcount=2
Then try to boot
Click to expand...
Click to collapse
The output of fastboot:
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.27.1100
(bootloader) version-baseband: 11.24A.3504.31_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.33.401.106
(bootloader) serialno: HT15XXXXXXXXXXXXXXX
(bootloader) imei: 356XXXXXXX
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813000
(bootloader) cidnum: HTC__E11
(bootloader) battery-status: good
(bootloader) battery-voltage: 4114mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 617f0a98
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Still doesn't boot succesfully, crashes on cm logo and restarts.
Your cidnum is not 1111111111 (i don't know how many "1" it got)
Maybe here
Gotcha!!!
And for the CID (so you can flash any ROM or RUU for latest radios and debranding)?
fastboot oem writecid 11111111 (to change CID)
fastboot reboot-bootloader (bootloader will reboot)
fastboot getvar cid (it will confirm your CID as 11111111
fastboot reboot (to reboot back in your current ROM)
Click to expand...
Click to collapse
From this thread
Flash the latest baseband too for better networking
Then try flashing ROM"s"
blogodoblogodo said:
Your cidnum is not 1111111111 (i don't how many "1" it got)
Maybe here
Gotcha!!!
From this thread
Click to expand...
Click to collapse
Alrighty, the CID is now supercid, but it still doesn't boot.
blogodoblogodo said:
Your cidnum is not 1111111111 (i don't know how many "1" it got)
Maybe here
Gotcha!!!
From this thread
Flash the latest baseband too for better networking
Then try flashing ROM"s"
Click to expand...
Click to collapse
I've done that now, still won't boot. I'm just gonna give up at this point.
ShadowCodeGaming said:
Alrighty, the CID is now supercid, but it still doesn't boot.
Click to expand...
Click to collapse
Wipe All for a clean install put the GApps and that's the end of the Nightmare ^^
Have a nice night... Back to home end of work day
blogodoblogodo said:
Wipe All for a clean install put the GApps and that's the end of the Nightmare ^^
Have a nice night... Back to home end of work day
Click to expand...
Click to collapse
I wiped it clean... Didn't change anything
My Fastboot getvar all:
INFOversion: 0.5
INFOversion-bootloader: 1.29.0000
INFOversion-baseband: N/A
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.33.401.106
INFOserialno: HTxxxxxxxxxx
INFOimei: 35xxxxxxxxxx
INFOproduct: pyramid
INFOplatform: HBOOT-8260
INFOmodelid: PG5813001
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 4065mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 705f86f6
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.488s
After all these flash could you write your new "Fastboot getvar all" please
I'm not sure, but I think it might be related to your hboot. Can you update your hboot to 1.29? I remember to have read somewhere that that would help.
flash the boot.img of the rom via fastboot command
fastboot flash boot boot.img
Sajito said:
I'm not sure, but I think it might be related to your hboot. Can you update your hboot to 1.29? I remember to have read somewhere that that would help.
Click to expand...
Click to collapse
Any link to it? Tried google but didn't find it.
ShadowCodeGaming said:
Any link to it? Tried google but didn't find it.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=21711303&postcount=2
Under HBoot 1.29.0000 Patch.
Allright, did the hboot patch and flashed boot.img manually, both made no difference
Sent from my Sense 5 powered HTC Sensation
ShadowCodeGaming said:
Allright, did the hboot patch and flashed boot.img manually, both made no difference
Sent from my Sense 5 powered HTC Sensation
Click to expand...
Click to collapse
Plz, Another getvar all.
Try this PacManRom
blogodoblogodo said:
Plz, Another getvar all.
Try this PacManRom
Click to expand...
Click to collapse
You'll get it as soon as I'm home
Sent from my Sense 5 powered HTC Sensation
ShadowCodeGaming said:
You'll get it as soon as I'm home
Sent from my Sense 5 powered HTC Sensation
Click to expand...
Click to collapse
Okéy see you
blogodoblogodo said:
Okéy see you
Click to expand...
Click to collapse
Here's the new getvar:
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.29.0000
(bootloader) version-baseband: 11.24A.3504.31_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.33.401.106
(bootloader) serialno: HT15XXXXXXXXXXXXX
(bootloader) imei: 356XXXXXXXXXXXX
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3909mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 705f86f6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.499s
my mobile suddenly don't accept any custom Rom keep hang on the white screen with word HTC
now i try to flash a new original Rom
RUU_Pyramid_HTC_ARA_1.45.415.5_Radio_10.56.9035.00U_10.14.9035.01_M_release_220005_signed
but it hang while flash it from the computer at 44%
any advice
please my mobile off more than 3 days
30 views with no answer
please support me
hemainsider said:
my mobile suddenly don't accept any custom Rom keep hang on the white screen with word HTC
now i try to flash a new original Rom
RUU_Pyramid_HTC_ARA_1.45.415.5_Radio_10.56.9035.00U_10.14.9035.01_M_release_220005_signed
but it hang while flash it from the computer at 44%
any advice
please my mobile off more than 3 days
Click to expand...
Click to collapse
can you post your bootloader details?
don't show your imei and s/n
unlocked
pyramid pvt ship s-off rL
hboot-1.18.0000
radio-11.24A.3504.31_M
eMMC-boot
aug 2 2011,22:35:52
not the mobile on the white screen with this details
and 4 marks in the 4 corners
hemainsider said:
unlocked
pyramid pvt ship s-off rL
hboot-1.18.0000
radio-11.24A.3504.31_M
eMMC-boot
aug 2 2011,22:35:52
Click to expand...
Click to collapse
hemainsider said:
not the mobile on the white screen with this details
and 4 marks in the 4 corners
Click to expand...
Click to collapse
my mistake i meant post the output from this command
fastboot getvar all
the phone now hang like the photo
http://forum.xda-developers.com/attachment.php?attachmentid=1116047&d=1339190429
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.17.0011
(bootloader) version-baseband: 11.24A.3504.31_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.33.401.106
(bootloader) serialno:
(bootloader) imei:
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3800mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: 92e53710
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.057s
hemainsider said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.17.0011
(bootloader) version-baseband: 11.24A.3504.31_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.33.401.106
(bootloader) serialno:
(bootloader) imei:
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3800mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: 92e53710
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.057s
Click to expand...
Click to collapse
try this ruu.exe
http://shipped-roms.com/download.ph...0U_11.24A.3504.31_M_release_280871_signed.exe
i am sorry it fail it hang in at 46%
i am afraid that something happen in the hardware
u r my only hope no one answer me
Relock ur bootloader and try the ruu again.
To relock, type this fastboot command
fastboot oem lock
hemainsider said:
i am sorry it fail it hang in at 46%
i am afraid that something happen in the hardware
u r my only hope no one answer me
Click to expand...
Click to collapse
ok let's try this
change the cid to HTC__001
then install again the ruu
jmcclue said:
Relock ur bootloader and try the ruu again.
To relock, type this fastboot command
fastboot oem lock
Click to expand...
Click to collapse
i am sorry i tried and it stuck at 39%
i don't know why this happen
any another solution
rzr86 said:
ok let's try this
change the cid to HTC__001
then install again the ruu
Click to expand...
Click to collapse
sorry please tell me how to do that
hemainsider said:
sorry please tell me how to do that
Click to expand...
Click to collapse
fastboot oem writecid <<the cid>>
fastboot reboot bootloader
fastboot getvar cid (to confirm the cid)
What recovery did u have on ur phone?
jmcclue said:
What recovery did u have on ur phone?
Click to expand...
Click to collapse
before what happen i used
4eXT Recovery Touch v1.0.0.6_RC1
hemainsider said:
before what happen i used
4eXT Recovery Touch v1.0.0.6_RC1
Click to expand...
Click to collapse
Oh rite, thought that if u had twrp recovery it mite have corrupted a partition coz its happened to many phones already.
U should try what @rzr86 said above, changing ur cid back to what it was before supercid. It has work a few times before so its worth a shot.
i tried and it hang at 39%
i am afraid that i can 't use my mobile again
jmcclue said:
Oh rite, thought that if u had twrp recovery it mite have corrupted a partition coz its happened to many phones already.
U should try what @rzr86 said above, changing ur cid back to what it was before supercid. It has work a few times before so its worth a shot.
Click to expand...
Click to collapse
I do it and change my cid It became now HTC__001
Nothing happen hang again when try to run the RUU