HI Guys
So my mate's phone won't boot up and I'd really appreciate some assistance. The last thing I did was unlock the phone via htcdev. But that's all I could do. Now I can't flash a recovery (I've tried a few) because I get an IMAGE UPDATE ERROR. I've also received a "SIGNATURE VERIFY FAIL" error.
Also, adb won't recognise my device but fastboot does.
What I'm trying to do is install a custom rom because my mate was complaining that his phone was slow and a bit laggy. I sold the phone to him in the first place so I've taken it upon myself to fix it.
Thanks guys, let me know if you need any further info.
CJ
First of all, we need some information about your phone.
I need : what kind(k2u, k2ul and so on)
Then what you have already done.
Then the other things (best of all you copy all information from your boot loader)
Edit: okay skript point 2 xD
Kreumadragon
Thanks for getting back to me.
Here's the information you've requested.
UNLOCKED
K2_ul PVT SHIP S-ON RL
HBOOT-2.21.0000
Radio-1.18.40a.00.05
openDSP-v13.2.0268.0620
OS-3.12.980.10
eMMC-boot 1024MB
Jul 2014
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.21.0000
(bootloader) version-baseband: 1.18.40a.00.05
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.12.980.10
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT2BWTP01724
(bootloader) imei: xxxxxxxxxxxxx
(bootloader) meid:
(bootloader) product: k2_ul
(bootloader) platform: HBOOT-8930
(bootloader) modelid: PL8015000
(bootloader) cidnum: OPTUS001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4330mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-2bb255c2
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.100s
Let me know if you need any further information.
With regards to what I have already done, I tried to flash TWRP recovery but I got an image update error.
Mhh do you flash the right TWRP?
And use fastboot flash recovery *recovery name*?
Do you have any data's to loose?
Kreumadragon
yeah I flashed a few different TWRPs and none of them worked.. if there is a specific one and if you have a link, I could try again?
nope i don't need any data to lose. I have removed the sd card. Thanks again.
Anyone? Still having no luck with this phone.
Please test (if you want) the cwm recovery. Link:
http://forum.xda-developers.com/showthread.php?p=37075457
If this doesn't work flash a ruu and try again
Kreumadragon
There is no RUU out which will work and also the cwm is outdated.
How did you flash recovery?
Use the one i recommended in my index thread. This should work on your hboot.
An other option is to get s off and flash it via pl**img.zip isn't it?
Kreumadragon
You need a working OS for S-off. Not sure if that is working here.
@Old
You have s off, haven't you?
And I get s off with hboot 2.21
Kreumadragon
I don't have One SV anymore.
Rumrunner works on hboot 2.21.
He says that he didn't have data's to loose
theoretically you can create an ........IMG.zip file with all files a ruu use, only the recovery is changed? Think I can make one but first want to read what you think(old)
Kreumadragon
As long as he is S-on you don't need to make anything.
Right now he can only flash signed firmware by HTC this way.
Okay, thx I don't know
Actually no ruu for any kind of k2ul?
Kreumadragon
Only one. And you must be S-off or on ICS to use that.
@CJ_
Do you have test old.s method?
If this doesn't work, you probably need SOff.
Kreumadragon
Hi old.splatterhand, to answer your question, I flashed the latest TWRP recovery (2.8. something) but I got the following IMAGE UPDATE ERROR. Will try the ones in your index and report back.
Thanks for your help guys.
Will try it now... If that doesn't work, how do I get S-Off when I can't do anything with the phone?
Related
Hi people i am stuck on splash screen with No bootloader, rom or recovery s-on locked bootloader hboot 1.18.0000
Any ideas???
ave you:
Pulled the battery, replaced it - pressed and help the powerbutton and volume down button, released the power button, got the screen with 3 androids?
If so you can then reflash the stock RUU and get back up in no time
I only get the splash screen inless i put in and unplug usb cable then i just get the hboot version ect.....
I can do a few fast boot commands but with the hboot 1.18.0000 i dont get advanced ones so screwed there. The ruu's have wrong bootloader error.
Im pretty screwed really!
what do you mean by "ruu's have wrong bootloader error"? If that stuff still works.. you should be able to fix it easily. I'm banking on the assumption that you're running the wrong RUU's and don't have SuperCID hence the "bootloader errors" (which I have no idea what that is!)
It comes up with error wrong bootloader error. I think its something to to do with the hboot version. I have tried every single ruu for the sensation.
any1 got any ideas as its still screwed x
What software version were you on before you tried to root/S-OFF?
i was on miui and had s-off unlocked and it was rooted. i am now s-on ***relocked*** and hboot 1.18.000 with no rom or recovery and with usb cable in its stuck on splash screen.
I mean what was your original ROM that was on it when you first got the phone? Without that it's hard to suggest an RUU to use
cant remember but i have ttied every ruu on shippedroms.com
i have supercid still by the way
You are not able to S-off thru revolutionary?
I have had this fone stuck like this since jan surely someone must know a way??
If hboot 1.18.000 supported advanced fastboot commands i could just put a recovery on it and then go from there. Sadly i cant and i cant find a way to send a hboot 1.17 while on 1.18 to the fone???
No it looks for adb devices. I only have fastboot.
Dunno if this helps:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.18.0000
(bootloader) version-baseband: 11.15.3504.16_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.06.401.1
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3989mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: 9d24123f
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.494s
So connecting in fastboot to the PC and running the RUU doesn't work? Have you tried the PG58IMG.zip method of flashing an RUU?
Yes mate i have ttried that as well :-( wen i unplug the usb cable i just get to the hboot screen and the only thing it says is ruu where the recovery option used to be.
:-( I think its dead and needs stamping on!
Someone must have an idea???
Im using a ****ty fone that only calls and sends txts plus onlu holds a few messages so i cnstntly have to clear my inbox :-(
Please help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
OK, lets see if i can help at all.
Lets get the basics sorted, what phone, what rom - original and before problem, what CID - original, which country / network, was it locked / branded...?
Then what steps did you do to end up messed up as you are? You say you had s-off and unlocked? Did you try to s-on, do a bad flash, update firmware, pee on the phone / give it to your dog...?
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.18.0000
(bootloader) version-baseband: 11.15.3504.16_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.06.401.1
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3989mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: 9d24123f
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.494s
Standered htc sensation
I cant remember the original rom it came with but i have tried every shipped rom so far.
I used revolutionary to gain s-off and root it and was running miui and everything was fine for months then all of a sudden it restarted into bootloop :-( this was in december. Then i cant remember exactly wot i did but i lost recovery so was unable to flash new rom like that so i decided to flash a shipped rom.
The ruu failed so i put s-on and retried but it still failed. Then i noticed the new bootloader unlocker had just came out so unlocked it but soon relocked it.
This has now left me with a relocked bootloader s-on and no recovery at all.
I am on hboot 1.18.0000 so cant do advanced fastboot commands,
Cant use adb on it only fastboot so i think i maybe SCREWED!!!
Anymore info mate???
Thanks in advanced for trying mate
Hi, I was trying to unroot my desire S, I have been following the desire fanatics guide on youtube (Can't post the link - sorry)
And I got up to the point where I was running the RUU utility. It started and then It got to about 50% in and then said Error, please use the correct RUU utility. (I'm guessing I've downloaded the incorrect RUU file.
So now, when I turn the phone on it goes right into the white menu with all the stuff on HBOOT etc.. fastboot I think it is, and it says security warning.
I'm guessing Its wiped the data but no longer has an OS to boot into. I honestly don't think it is bricked but I have no clue what to do from now!
I got my phone from mobiles.co.uk (A carphone warehouse subsidiary) and it is on contract with T-mobile. The phone had no branding on it from T-mobile so I guess its unlocked.
However I downloaded the T-mobile UK RUU and ran that..
Any advice on what to do from here? I'm currently in the process of downloading The Saga_HTC _Europe_1.28.401.1_Radio20.28b.30.0805U_38.03.02.11_M_release_177977_signed.exe
I don't even know if this will work because I can't get into any OS. I also read a lifehacker article and it said I can put a file onto the SD card and it will automatically run fixing the phone, making it better.
Please help me!
So far, I've tryed:
RUU_Saga_HTC_Europe_1.28.401.1_Radio_20.28b.30.0805U_38.03.02.11_M_release_177977_signed
and
RUU_Saga_TMO_UK_1.30.110.2_R_Radio_20.28b.30.0805U_38.03.02.11_M_release_180106_signed
But neither of these have worked, it gives me an error 140 saying I'm using the wrong version!
Can anybody tell me the correct version for an unlocked desire S bought in the UK from mobiles.co.uk?
Something that may of made this slightly more difficult for myself Is that While following the guide I followed, I used android flasher and flashed the bootloader included in the Revert to stock bundle kit thing, It was called engHBOOToverARX
I honestly have no Idea how I can fix this but Hopefully somebody else can!
can you tell me your current hboot version?
is your device detected by ADB?
if you have not set up ADB before read this below link
His device won't be detected by adb, only fastboot.
Run fastboot command "fastboot getvar all" and post the response.
Ok, this is what I get after fastboot getvar all:
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 0.98.0000
(bootloader) version-baseband: 38.03.02.11_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.47.401.4
(bootloader) serialno: SH15NTJ00762
(bootloader) imei: 356708049175530
(bootloader) product: saga
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PG8810000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4040mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 361a7ba6
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.023s
And I have the ability to run adb commands but I don't know what command to use to check if its detecting my device, I type adb into cmd and loads of commands come up..
@imattacus
Okay you have a UK unbranded phone, I say this cause your CID is HTC__001 and your main version is 1.47.401.4.
So to fix you can either;
1) You can download this RUU (v1.47.401.4, hboot 0.98.0002) and run it from the PC.
Or
2) Change your main version (by getting shell root) then trying again with the 1.28.401.1 RUU. (but may be impossible since you can't get adb)
Option 1 is the easiest.
Same issue with Virgin Mobile RUU
Anyone got the correct RUU for me as I've got the same issue with a Virgin Mobile RUU. I followed the instructions for unrooting here. I was using the Virgin Mobile RUU listed on the link provided which was this list but I keep on getting error 140 when I run the RUU, telling me to use the correct one.
My bootloader is as follows:
SAGA PVT SHIP S-ON RL
HBOOT-0.98.0000
RADIO-38.03.02.15_M
eMMC-boot
I just need to find the right RUU version.
Any help would be greatly appreciated and as soon as possible.
Thanks
Just use Goldcard and try 1.47.401.4 again.
I also have a few problems with my Desire-S:
-my android email app keeps crashing when i try to open any email;
-official update aborts instalation (system 7) (even after hard reset).
So i decided to try fixing this via RUU. My phone is unbranded (bought in Slovenia's Vodafone), unrooted:
-android 2.3.3
-Sense 2.1
-Build 1.47.401.4
-Boot says: Saga PVT Ship S-on RL, Hbroot 0.98.0002, radio 3805.06.02.03_M
I tried to install:
-RUU_Saga_S_HTC_Europe_2.10.401.9_Radio_20.4801.30. 0822U_3822.10.08.04_M_release_234765_signed.exe
Every time i get an error 131- customer id error and message, that the ruu is wrong...
So i tried with the older one:
-RUU_Saga_HTC_Europe_1.47.401.4_Radio_20.28I.30.085 AU_3805.06.02.03_M_release_199410_signed.exe
And i keep getting error 140.
And i'm stuck here. Any help? I'd like to put on 2.3.5 with sense 3 without that email bug.... and i'm considering taking it to the repair service...
Thank You
i had in a way similar problem with imattacus...
only i can't run adb commands (adb devices returns no value)
i tried folowing ruu-s:
RUU_Saga_S_HTC_Europe_2.10.401.5_Radio_20.4801.30.0822U_3822.10.08.04_M_release_219480_signed
RUU_Saga_S_HTC_Europe_2.10.401.8_Radio_20.4801.30.0822U_3822.10.08.04_M_release_225161_signed
RUU's installed, but after boot phone was stuck in white screen with green htc.
after i installed this RUU my phone booted:
RUU_Saga_HTC_Europe_1.47.401.4_Radio_20.28I.30.085AU_3805.06.02.03_M_release_199410_signed
update>>
I checked for updates and there were some... After installing phone stuck on white screen...
I just whish to restore my phone to it's factory outofthebox state..
My getvar all result is::
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 6.98.1002
(bootloader) version-baseband: 3822.10.08.04_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 13.10.401.8
(bootloader) serialno: HT13HTJ16283
(bootloader) imei: 355067040509788
(bootloader) product: saga
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PG8810000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 4020mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 361a7ba6
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.017s
Any sugestions?
Goldcard
Sent from my HTC Desire S
I have installed ruu with the gold card, but I did removed it before update... Will try again and post back. Thank you very much for quick response!
>>>>>update...
Unfortunately, with gold card everything went same as before...
When i download and run update, phone reboots into update screen with progress bar, then reboots to update screen with same bar, then reboots to update screen without progress bar, then reboots and stays stuck on white screen...
i guess i have to find a way to unroot and s-on my device to the stock values before i try to update again...
my fastboot screen reads:
SAGA PVT SHIP S-OFF RL
HBOOT-6.98.1002
RADIO-3822.10.08.04_M
eMMC-boot
Mar 10 2011, 14:58:38
One more curious thing..
When i install RUU ver 1.47.401.4 (only i'm able to boot so far) image version that i overwrite (visible from RUU install screen) is 13.10.401.8... A bit large number, isn't it?
>>> FINAL UPDATE
SUCCESS!!!
as i suspected earlier, when i folowed first post on this topic i locked the phone, and then update worked.
have a nice day, everyone!
final edit*** my desire s is halfway through unrooting according to the 18min video but i get error 170 usb and the cid error when flashing ruu
this is my bootloader and the other thing
*** Security Warning ***
SAGA PVT SHIP S-ON RL
HBOOT-0.98.0000
RADIO- 38.03.02.11.M
eMMC-boot
Mar 10 201,14:58;38
(bootloader) version: 0.5
(bootloader) version-bootloader: 0.98.0000
(bootloader) version-baseband: 38.03.02.11_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.04.401.1
(bootloader) product: saga
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PG8810000
(bootloader) cidnum: T-MOB005
(bootloader) battery-status: good
(bootloader) battery-voltage: 4060mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 361a7ba6
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
can anyone point me in the direction of the appropriate t-mobile ruu for the uk p.s i'm aware i need a gold card however my cidnum says t-mob and i am trying to flash a t-mobile ruu so it should work right ?
even with a gold card it doesnt work keeps saying 140 error not the right ruu.. basically i think my version main is too high to update as its 3.04.401.1... is there a ruu high enough on tmobile uk for me? please dont say i need to root it again then .. if so then i guess i'm stuck like this because i cant be bothered rooting again, just really wanna know if there a working ruu
"goldcard" is the word you're looking for.
Search will guide you from here.
Jack_R1 said:
"goldcard" is the word you're looking for.
Search will guide you from here.
Click to expand...
Click to collapse
thansk yeah im going to try that when i get home from work
i also read this http://forum.xda-developers.com/showpost.php?p=16684717&postcount=38 and was wondering if this might affect me and what details would i need to look at on my phone and ruu to make sure its correct
bump.. first post, please read it. i would like some feedback
GGLDN said:
bump.. first post, please read it. i would like some feedback
Click to expand...
Click to collapse
Hi, do you mean the desirefanatics video? I've been through that procedure one week ago and had problems with the RUU. You can try to extract the rom.zip from the RUU and rename it to PG88IMG.zip, put it on your SD-card and boot into bootloader. The phone will find the zip and start the update!
Edit: Oh, and my phone is branded as well. If you find the rom.zip, look for a txt file called android-info. If your CID is in there, it should be fine to use without goldcard or whatever.
Hi Guys,
Decided to put a new rom on my daughters HTC ONE X (my old phone), and right royally stuffed it up.
Was going to put a new hboot on as the one I had I thought was old, but now I've wiped the recover (TWRP) and can't seem to get it back. Phone was Telstra.
Details as follows:
C:\htc\Data>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.11.0000
(bootloader) version-baseband: 0.23a.32.09.29
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.89.841.9
(bootloader) serialno: HT26NW30xxxx
(bootloader) imei: 35222xxx80506xxxx
(bootloader) product: evita
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ8312000
(bootloader) cidnum: TELST001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3664mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 8d23f0c0
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.078s
Have tried for two days on/off to get it to load a recovery, but no luck.
any help really appreciated..
jnrdavo said:
Hi Guys,
Decided to put a new rom on my daughters HTC ONE X (my old phone), and right royally stuffed it up.
Was going to put a new hboot on as the one I had I thought was old, but now I've wiped the recover (TWRP) and can't seem to get it back. Phone was Telstra.
Details as follows:
C:\htc\Data>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.11.0000
(bootloader) version-baseband: 0.23a.32.09.29
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.89.841.9
(bootloader) serialno: HT26NW30xxxx
(bootloader) imei: 35222xxx80506xxxx
(bootloader) product: evita
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ8312000
(bootloader) cidnum: TELST001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3664mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 8d23f0c0
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.078s
Have tried for two days on/off to get it to load a recovery, but no luck.
any help really appreciated..
Click to expand...
Click to collapse
Place the recovery.img in you folder where your adb is located, reboot your phone into bootloader and select fastboot. Plug the device into your computer. If you have the right drivers installed, your screen should now say FASTBOOT USB. Run the following command via the command line:
fastboot flash recovery "recoveryfilename.img" In this command line make sure to rename recoveryfilename to which match the name of the the version you are using
example: fastboot flash recovery openrecovery-twrp-2.6.0.0-evita.img
after it has finished reboot
More information required. Please post your bootloader details (I'm mostly interested in the top line where it says tampered/locked/unlocked/relocked), what ROM you flashed, what recovery you flashed, and the method used to flash both.
PS. Questions go in the q&a section. I've asked for this to be moved for you.
[EDIT] What venomtester has said above is the correct procedure, but we still need the info I've requested to troubleshoot effectively.
Sent from my Evita
Thanks all for your help. Sorry for putting in the wrong forum. Here is the boot screen:
**** TAMPERED ****
**** UNLOCKED ****
EVITA PVT SHIP S-ON RL
HBOOT-1.11.0000
RADIO-0-.23a.32.09.29
OpenDSP-v28.1.0.32.0504
eMMC-boot
Jun 7 2012,13:10:34
What have I tried, lots (to be honest). I started to use Hasoon2000 v2.5 great utility (ONE X), I have tried the flash FactoryRUU, tried CWM, TWRP, but still no luck.
Not sure if the hboot version is causing all the problem, but tried to update that, unsuccessfully (probably to do with s-off).
good news is I can talk to the phone with fastboot, get back results etc.. Just tried to flash openrecovery-twrp-2.4.0.0-endeavoru.img, it seems to flash ok with fastboot, but when I reboot to recovery, I can see the brown bar at the top right of the screen run twice, but then nothing else happens, just sits on the white 'HTC quitely brilliant, this build is for' ... screen.
jnrdavo said:
Just tried to flash openrecovery-twrp-2.4.0.0-endeavoru.img,
Click to expand...
Click to collapse
That's your problem right there. You tried to flash TWRP for the ENDEAVORU (quad core version) when your phone is the EVITA (dual core).
redpoint73 said:
That's your problem right there. You tried to flash TWRP for the ENDEAVORU (quad core version) when your phone is the EVITA (dual core).
Click to expand...
Click to collapse
Thanks mate for pointing me in the right direction. I'll try the right file
I really should stop doing this kind of work at 5:00am in the morning!
just a quick question, if I download the correct twrp, should I just have to fastboot it and overwrite what I have done, or do I need to do anything prior before flashing the correct one?
jnrdavo said:
just a quick question, if I download the correct twrp, should I just have to fastboot it and overwrite what I have done, or do I need to do anything prior before flashing the correct one?
Click to expand...
Click to collapse
I'd try to flash it over fastboot, and see what happens.
jnrdavo said:
just a quick question, if I download the correct twrp, should I just have to fastboot it and overwrite what I have done, or do I need to do anything prior before flashing the correct one?
Click to expand...
Click to collapse
Just make sure after flashing the correct recovery you also give this command:
fastboot erase cache
Sent from my Evita
timmaaa said:
Just make sure after flashing the correct recovery you also give this command:
fastboot erase cache
Sent from my Evita
Click to expand...
Click to collapse
Thanks guys, all working well now!
Hi sorry for new post but i tried to search some info but it didint helped me. So at first i installed viper s rome (old one 4.1.X ) then i tried to install cyogen 11, but i think i accidentaly pushed out usb cable when i was transfering rom.zip file.
So i tried to flash cyogen rom but it failed. Then i tried to restore from recovery. It was successful, but then i stucked in boot loop (recovery mode).
So how can i go back to stock?
ErnestasC13c said:
Hi sorry for new post but i tried to search some info but it didint helped me. So at first i installed viper s rome (old one 4.1.X ) then i tried to install cyogen 11, but i think i accidentaly pushed out usb cable when i was transfering rom.zip file.
So i tried to flash cyogen rom but it failed. Then i tried to restore from recovery. It was successful, but then i stucked in boot loop (recovery mode).
So how can i go back to stock?
Click to expand...
Click to collapse
Some of this may help:
http://xda-university.com/as-a-user/how-to-recover-from-a-bootloop
http://forum.xda-developers.com/showthread.php?t=2678700
how to know which ruu is good for me? i bought my fone in england it was unlocked my radio is 1.11.50.05.28
ErnestasC13c said:
how to know which ruu is good for me? i bought my fone in england it was unlocked my radio is 1.11.50.05.28
Click to expand...
Click to collapse
You need your CID (Country ID), you can get it from the the boot screen:
Press and hold the VOLUME DOWN button, and then press and hold the POWER button.
Wait for the screen with the three Android images to appear, and then release the POWER and VOLUME DOWN buttons.
The CID is the 2nd line.
Write down the HBOOT and Radio versions too.
VLE PTV SHIP S-ON RL
HBOOT-2.15.0000
RADIO-1.11.50.05.28
OpenDSP-v31.1.0.45.0815
eMMC-boot
Dec 14 2012, 17:10:57:-1
all info i could get
So no CID on the screen above this?
What is the carrier? You can use an RUU that is equal or newer than what you have.
http://androidruu.com/?developer=Ville
so wich one should i pick?
ErnestasC13c said:
so wich one should i pick?
Click to expand...
Click to collapse
Try this to get your info:
http://forum.gsmhosting.com/vbb/f485/guide-how-get-cid-main-ver-bootloader-etc-1638931/
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.15.0000
(bootloader) version-baseband: 1.11.50.05.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH23MW404445
(bootloader) imei: 359901045063217
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4010000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3800mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-64bedd38
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
OK so it seems that HTC__001 is HTC Europe. So you need any RUU that is same or newer with "HTC_Europe" in the RUU name.
So if you look here:
http://www.androidruu.com/?developer=Ville
This one has the exact same radio.... hopefully this is it!
http://www.androidruu.com/getdownlo...28_10.27.50.08L_release_301814_signed_2_4.exe
808phone said:
OK so it seems that HTC__001 is HTC Europe. So you need any RUU that is same or newer with "HTC_Europe" in the RUU name.
So if you look here:
http://www.androidruu.com/?developer=Ville
This one has the exact same radio.... hopefully this is it!
http://www.androidruu.com/getdownlo...28_10.27.50.08L_release_301814_signed_2_4.exe
Click to expand...
Click to collapse
tried this one no luck
ErnestasC13c said:
tried this one no luck
Click to expand...
Click to collapse
What happened? Did it give an error? Did you relock the bootloader first?