I've seem to have fixed a friend phone as it was registering all touches, but was wondering if anyone can tell me what happened. I didn't have to open the phone.
Kept the power button pressed to force-off the phone, but it reboots.
Took battery out, put it back in, powered phone on, touch interface worked for a few seconds than stopped.
Took battery out, put it back in, started phone in maintenance mode (Stock ROM) and formatted cache.
Rebooted phone and without delay selected options to power down the phone normally. Now, as the phone was shutting down it vibrated 3 times as opposed to once. What does this mean?
Turned on the phone and the touch interface now works fine
Again powered down the phone and this time it vibrated once as opposed. What does this mean?
Since then it appears that the phone is working fine. My friend even mentioned it's working a bit quicker.
I don't fully understand what's happened to make the phone work. The significant thing is as the phone was powering off it vibrated three times at the moment of power-off.
Sorry if I've asked in the wrong thread. Not sure where to ask this question. The "General" forum seemed to be the appropriate place.
Related
Hello Guys,
I started to have problems with my wing and end up in three-color bootloader screen. I can tell you that I am not playing around with my phone. I do not even install any software not to risk its basic phone functionality since I am using this phone as a business phone. So, no crazy rom flash or etc has been done prior to this problem.
My phone started to have problems with answering calls last week. When it was ringing, it was keep ringing and I was not able to take the call even though I was pressing every possible buttons on the phone. It was locking.
I noticed that phone was locking the buttons too. So, I selected "do not lock buttons when the device is off". But, this does not have any effect. Phone was keep locking my buttons.
Last night, I noticed that my phone was unresponsive once again as usual, I soft reset the device, and it booted to the three color screen (I think you guys call this bootloader screen?) where it says "IPL 4.26.0002" and "SPL 4.26.0000". Tried to soft reset probably another 10 more times. same thing...
I took out the battery, went to sleep. Put back the battery in the morning, it booted to the OS and phone is running. But none of the hard buttons were working. It also hangs up the incoming call after first ring. I soft reset the device once again and it went back to the three-color screen.
I went to the Tmobile website, and found that there is an upgrade ROM. I downloaded and ran that program. It said that it installed it to the device successfully, and then the device rebooted itself. Guess what, back to the three-color screen.
I have been reading your forum since morning, and read a lot about brick phones etc. I tried couple of the techniques for recovering brick phones, but nothing helped. Hopefully, someone here can tell me what is going on, even though if the answer is to throw the device to the trash.
Additional Observations
It looks like nobody is interested
I have other observations.
- When "do not lock buttons" is checked, phone starts acting even more weirder. it generates keystrokes by itself. Camera starts taking photos.
- If the battery of the phone is out at least an hour (I don't know why), phones boots fine. If you soft reset at the moment, it will always goes back to the three color bootloader.
Can this be a virus?
Last night I started to make a phone call and as soon as the line started ringing, the phone became completely unresponsive. The screen was blank, and when I slide out the keyboard, nothing was lighting up, although the phone call was still active (it went to the person's voicemail). I ended up holding down the power button and after a minute or so the phone rebooted itself.
Afterwards the SD that I've used for the past 2 years was unreadable by the phone and later unreadable by my computer. I did a factory reset and the sd was still a no go (I did put another one in and it read fine).
I have had this phone for 2 weeks and have had no other issues yet. Has anyone ever had a similar issue, ie the phone becoming nearly inoperable during a call? .
Help with LG G3 Turns off During Boot & Unable to Factory Reset (is it a lost cause?)
Hello everyone. This is kind of a complicated issue, and I would love any help I can get.
Back story:
I have a Verizon LG G3, purchased in December of 2014. I never rooted the phone, so it has been stock this whole time. A couple of months ago, the SD card holder randomly stopped working (no spills or drops). I tried multiple, new SD cards, formatted them and everything, but the phone just kept ejecting the SD card, and corrupting them, so I just gave up on it and stopped using an SD card in the phone. This is not the current issue at hand, but I wanted to preface that I've been having issues with the phone.
Fast forward to a month ago. I had my phone plugged into the wall charging, and was not using it. I noticed out of the corner of my eye that my phone turned off. I unplugged the phone and tried turning it back on. It showed the LG logo screen, then the verizon screen, and then just turned off. When I tried powering it again, it did nothing. I pulled the battery, put it back in, and pressed the power button. I got the same series of lg logo, verizon logo, then off. I thought maybe it was a battery issue and took it to a local phone repair shop. They put in a new battery, but got the exact same boot problem I did. I left the phone with them, and they took it apart to see if it was a hardware issue (and the infamous stuck power button issue). When I returned, they told me that they did not find any hardware issues. It also was not an issue of the stuck power button/power button not working. They decided that it must be a software issue. Their explanation was that the phone had probably tried doing a software update and something went wrong. They said they could only fix it by completely wiping the phone and installing the software back on. I was reluctant to go through with it because (1) I would lose all my data (and I did not back it up, my fault, I know) and (2) it seemed like they wanted me to pay almost 100$ for something I could do at home. So I kept the phone and left it alone for a while. Now, it has been a month since the issue began, and I'm trying to see if I can fix it. Here is what I have tried.
1. Tried to power it normally again, but now the phone won't boot past the lg logo screen (no verizon screen, just turns off)
2. Held down the power button and volume down button, and able to get into recovery.
3. Tried safe mode -> boots to lg logo and turns off
4. Tried wipe cache -> boots to lg logo and turns off, does it twice
5. Tried USB debug -> shows the android icon, looks like its working, turns off
6. Finally tried factory data reset -> goes through the "are you sure" screen; select yes; shows android icon, looks like its working, turns off
7. Tried holding down the up button and plugging it into a computer to reinstall firmware, shows logo and turns off
8. When I plug the phone into the wall, it charges normally. Simply won't turn on past that.
I'm not sure what else I can do to the phone. Is there a way to factory reset from a pc or mac without the phone being on? Will I just have to take it to the tech store so they can do whatever magic they seem to possess? I already plan on never getting another android after the issues with this phone (and many androids before this one), but I need this phone to last until December.
Sorry for rambling and thank you for any help!
Bump
I have a Verizon Galaxy Note 2 i605 that's unlocked, using Straight Talk service, rooted, and was running stock Android version 4.1.1. On Thanksgiving Day, I was going to have dinner with friends. From my computer I found the location on Google maps, then sent the map to my phone. That's something I'd done many times, but this time when I clicked the link, it flashed the conformation asking if I was sure I wanted to load the map. When I clicked yes, the screen dimmed then immediately brightened and dimmed again. It continued this flashing at about 1/2 second intervals. During this time no buttons or combination of buttons had any affect on it. After about 40 or so seconds of this, I took the back off and removed the battery. I waited about a minute before reinserting the battery and replaced the back. I pushed the power button and fully expected it to boot normally. Boy was I in for some disappointment. It not only didn't boot, it didn't do anything. And hasn't since. No boot, no download mode, no recovery mode, and not recognized by the computer when connected by USB. It is dead. Does anyone know what happened, or more importantly, can it be revived?
Hey everyone who reads this.
I'd like to start my topic with apologising if I post this in the wrong section.
So, I have a LG Spirit H440N LTE for about 3 years now, maybe a little less. I've always taken good care of it, both physically and in updates / security wise aswell.
My phone has been working flawlessly until the last 2 days. 2 days ago i was charging my phone, and when it vibrated (meaning its 100%) I pulled the cable off, and pressed the power button (power button locks - unlocks the screen) the screen didn't turn on. I was like "wow that's strange" but didn't care much, i just kept pressing the button every 5-6 seconds, nothing.
At that point I pulled the battery out, let it sit for a short time and then put it back, start the phone, I felt the vibration (meaning it's starting up) but no screen, so my first idea was that I need to get a new firmware and completely reinstall my phone, as it seems like it got bricked.. for no reason, by itself ? Strange thing but I accepted it and literally been googling for 9 hours now and I find more and more issues.
After I got LG FlashTool, drivers, and even 3 different firmwares, I wanted to start the phone in download mode to start upgrading, but even though I held down "volume up for 5 seconds and then put the usb cable in" nothing happened, no screen, my PC didn't recognise the phone either.
So I got a little bit mad and pulled the cable out from the phone, I wanted to remove the battery, but out of nowhere the phone suddenly started loading in, screen working completely fine, i could do whatever i want, so my first thing was to do a hard reset. After the hard reset I set up my usual stuff (important apps etc) and I locked the screen so my battery won't go down. Little did I know, I ****ed up again, because ever since that happened, I can't get my screen to work again. I tried everything I could but my PC still doesn't recognise the phone (even after a LOT of drivers being installed), charging the phone doesn't do anything. Regardless if I remove - put back the battery no screen, no screen in download - hard reset mode either, it's just completely black.
I'd like to have some sort of help, because I am just completely out of ideas, I really feel like a firmware change could fix the phone, but if the computer doesn't recognise it, I have no idea what to do.
rawon3 said:
Hey everyone who reads this.
I'd like to start my topic with apologising if I post this in the wrong section.
So, I have a LG Spirit H440N LTE for about 3 years now, maybe a little less. I've always taken good care of it, both physically and in updates / security wise aswell.
My phone has been working flawlessly until the last 2 days. 2 days ago i was charging my phone, and when it vibrated (meaning its 100%) I pulled the cable off, and pressed the power button (power button locks - unlocks the screen) the screen didn't turn on. I was like "wow that's strange" but didn't care much, i just kept pressing the button every 5-6 seconds, nothing.
At that point I pulled the battery out, let it sit for a short time and then put it back, start the phone, I felt the vibration (meaning it's starting up) but no screen, so my first idea was that I need to get a new firmware and completely reinstall my phone, as it seems like it got bricked.. for no reason, by itself ? Strange thing but I accepted it and literally been googling for 9 hours now and I find more and more issues.
After I got LG FlashTool, drivers, and even 3 different firmwares, I wanted to start the phone in download mode to start upgrading, but even though I held down "volume up for 5 seconds and then put the usb cable in" nothing happened, no screen, my PC didn't recognise the phone either.
So I got a little bit mad and pulled the cable out from the phone, I wanted to remove the battery, but out of nowhere the phone suddenly started loading in, screen working completely fine, i could do whatever i want, so my first thing was to do a hard reset. After the hard reset I set up my usual stuff (important apps etc) and I locked the screen so my battery won't go down. Little did I know, I ****ed up again, because ever since that happened, I can't get my screen to work again. I tried everything I could but my PC still doesn't recognise the phone (even after a LOT of drivers being installed), charging the phone doesn't do anything. Regardless if I remove - put back the battery no screen, no screen in download - hard reset mode either, it's just completely black.
I'd like to have some sort of help, because I am just completely out of ideas, I really feel like a firmware change could fix the phone, but if the computer doesn't recognise it, I have no idea what to do.
Click to expand...
Click to collapse
You might be having hardware issues, such as a faulty power button. If you are the type of user that frequently presses the power button to lock/unlock the screen, this leads to excessive wear on the button components, this is why some users prefer to use the "tap to sleep" and "tap to wake" feature, to avoid wearing the power button out. On my LG, this feature is called "KnockOn", it's located in Accessibility settings.
Sent from my LGL84VL using Tapatalk