Related
Samsung Galaxy Tab 2 10.1 Hacked, Touchscreen unresponsive
Hi! I need help with my tablet.
Device: Samsung Galaxy Tab 2 10.1 Tablet, model GT-P5113 TS. This model doesn't have a way to yank out the battery.
What's wrong: Touchscreen is not responding.
Current state: Attempting to drain the battery. Doesn't appear to be turned on. Factory reset apparently performed.
What happened: Sorry, this is long. It is as best as I can remember it. It may be somewhat inaccurate.
Yesterday evening, I was on my Windows laptop and logged into my Google account. I *thought* I used the Google Play Store to install Chrome to the tablet. (I had looked at the html5test website and it said Chrome had a higher HTML5 rating than the Dolphin/Jetpack browser I've been using on my tablet.)
But something went terribly wrong.
After sending Chrome to it, I unlocked the tablet and used both Chrome and Dolphin to go to html5test website. They both scored the same or nearly the same. I don't know if any of that is relevant, but I'm including it just in case.
At some point after that, I woke the tablet with the power key and used my unlock pattern on the dots lock screen.
That's when I saw what I believe was mal-ware in action. The settings menus were scrolling and sub-menus being selected, all by themselves. I couldn't say exactly what was changed because whatever program or script that was running the process was going extremely fast.
When I realized it might be trying to send out data over my Wifi network, I turned off the Wifi router in my home.
I repeatedly held down the power key to turn the system off, but doing so only rebooted back to the useless lock screen which was not responding to anything. The normal method of holding the power button for a few seconds to bring up the menu and then tapping the "Power Off" option on that menu refused to power off the system. Nothing on that menu responded to touch.
Entering my pattern on the lock screen did absolutely nothing. I didn't even see any lines traced when I ran my finger over the screen.
At some point, I pulled out the external SD card. I have no idea if whatever hacked the tablet also put a copy of itself on the SD card.
I called a friend who looked up how to restore the tablet to factory settings. I didn't understand the directions exactly, so I ended up on a screen with a Warning!! about installing a Custom OS. (Holding down the Power + Volume Up seems to get me there)
I left it on this screen, and I turned my router back on and using my laptop, contacted Live Chat at Samsung but they didn't understand my problem. They told me to reboot the device and swipe my pattern several times and then after several failed attempts I would have the chance to use my Google credentials to get into it. But the device apparently never registered that my swipe attempts were failing.
So my device was booted up with me locked out, with the WiFi router on for a little while again. I turned off the router as soon as I realized that. That disconnected the chat session, but since Samsung chat wasn't helping me anyway, I didn't bother trying to go back.
I got the device back to the "Warning!!" screen. Then turned the router back on and searched for how to do a factory reset of the device. I found a video on YouTube and followed it.
I pressed the Volume Down and Power buttons simultaneously, followed by letting go of the power button. That brought up a menu which contained several options, including an option to do a factory reset. I used the volume buttons to highlight that and pressed Power key. A second screen came up and I used the volume buttons and power button to select "Yes" to confirm the reset.
It appeared to have done a factory reset, rebooting eventually.
However, after that, when I tried to tap on the touch screen to move forward through the selections, the touch screen was still unresponsive!
So I brought back the "Warning!!" screen and ran the battery down until the screen was blank and it wouldn't start when I held the power key.
Then I charged it for about 20 minutes and rebooted it. I think when it came back it was on the Recovery menu. I think I did a second factory reset, but not 100% sure. It eventually rebooted after a lot longer than usual.
When it came up, it was saying battery was low. I tried to tap the OK button, but nothing happened. Behind the battery window was the first setting screen to set up the device for the first time after a factory reset. (I think selecting USA?)
I brought back the "Warning!!" screen and left it on overnight so that the battery would run down.
That was about 8 hours ago. When I woke up, I used clear tape to keep the power button pressed down, to ensure that the battery will continue to run down.
____________________________________________
What do I do next? How do I get the touch screen to start working again? It is not a hardware problem, unless mal-ware can break the hardware. The touchscreen had been working fine until this happened.
Should I take the tablet back to Best Buy where I bought it at least a year (maybe 2 years) ago? I don't know if it's still under warranty.
I have over 20 year of experience as a software developer, but not for Android. I am not very experienced with doing anything to hardware.
Should I try to fix it myself?
I have never rooted any Android device and I'm not sure what that means, either.
I've never re-installed the ______ ? (rom? image? Odin?)
I read on this and/or other forums that there's a way to replace something, but the instructions were beyond my level of understanding. I would need the procedures to be broken down into steps which don't assume too much about what I know.
I understand how to download a file to Windows, given a URL for it. I understand what a zip file is and how to extract it. I understand how to press hardware buttons and plug in cables, and do these steps in the order I'm told.
I don't understand what I'd use to get the downloaded whatever-they-are onto the tablet to replace whatever-the-other-thing-is so that the touchscreen works again.
As far as I know, Odin is a Norse god.
The only firmware updates I've ever done are the ones that the device does on it's own through Samsung's updates.
I'd deeply appreciate getting this device back since I have extremely limited funds and probably won't be able to buy a replacement.
Thank you,
Linda
LMurphy said:
Samsung Galaxy Tab 2 10.1 Hacked, Touchscreen unresponsive
Hi! I need help with my tablet.
Device: Samsung Galaxy Tab 2 10.1 Tablet, model GT-P5113 TS. This model doesn't have a way to yank out the battery.
What's wrong: Touchscreen is not responding.
Current state: Attempting to drain the battery. Doesn't appear to be turned on. Factory reset apparently performed.
What happened: Sorry, this is long. It is as best as I can remember it. It may be somewhat inaccurate.
Yesterday evening, I was on my Windows laptop and logged into my Google account. I *thought* I used the Google Play Store to install Chrome to the tablet. (I had looked at the html5test website and it said Chrome had a higher HTML5 rating than the Dolphin/Jetpack browser I've been using on my tablet.)
But something went terribly wrong.
After sending Chrome to it, I unlocked the tablet and used both Chrome and Dolphin to go to html5test website. They both scored the same or nearly the same. I don't know if any of that is relevant, but I'm including it just in case.
At some point after that, I woke the tablet with the power key and used my unlock pattern on the dots lock screen.
That's when I saw what I believe was mal-ware in action. The settings menus were scrolling and sub-menus being selected, all by themselves. I couldn't say exactly what was changed because whatever program or script that was running the process was going extremely fast.
When I realized it might be trying to send out data over my Wifi network, I turned off the Wifi router in my home.
I repeatedly held down the power key to turn the system off, but doing so only rebooted back to the useless lock screen which was not responding to anything. The normal method of holding the power button for a few seconds to bring up the menu and then tapping the "Power Off" option on that menu refused to power off the system. Nothing on that menu responded to touch.
Entering my pattern on the lock screen did absolutely nothing. I didn't even see any lines traced when I ran my finger over the screen.
At some point, I pulled out the external SD card. I have no idea if whatever hacked the tablet also put a copy of itself on the SD card.
I called a friend who looked up how to restore the tablet to factory settings. I didn't understand the directions exactly, so I ended up on a screen with a Warning!! about installing a Custom OS. (Holding down the Power + Volume Up seems to get me there)
I left it on this screen, and I turned my router back on and using my laptop, contacted Live Chat at Samsung but they didn't understand my problem. They told me to reboot the device and swipe my pattern several times and then after several failed attempts I would have the chance to use my Google credentials to get into it. But the device apparently never registered that my swipe attempts were failing.
So my device was booted up with me locked out, with the WiFi router on for a little while again. I turned off the router as soon as I realized that. That disconnected the chat session, but since Samsung chat wasn't helping me anyway, I didn't bother trying to go back.
I got the device back to the "Warning!!" screen. Then turned the router back on and searched for how to do a factory reset of the device. I found a video on YouTube and followed it.
I pressed the Volume Down and Power buttons simultaneously, followed by letting go of the power button. That brought up a menu which contained several options, including an option to do a factory reset. I used the volume buttons to highlight that and pressed Power key. A second screen came up and I used the volume buttons and power button to select "Yes" to confirm the reset.
It appeared to have done a factory reset, rebooting eventually.
However, after that, when I tried to tap on the touch screen to move forward through the selections, the touch screen was still unresponsive!
So I brought back the "Warning!!" screen and ran the battery down until the screen was blank and it wouldn't start when I held the power key.
Then I charged it for about 20 minutes and rebooted it. I think when it came back it was on the Recovery menu. I think I did a second factory reset, but not 100% sure. It eventually rebooted after a lot longer than usual.
When it came up, it was saying battery was low. I tried to tap the OK button, but nothing happened. Behind the battery window was the first setting screen to set up the device for the first time after a factory reset. (I think selecting USA?)
I brought back the "Warning!!" screen and left it on overnight so that the battery would run down.
That was about 8 hours ago. When I woke up, I used clear tape to keep the power button pressed down, to ensure that the battery will continue to run down.
____________________________________________
What do I do next? How do I get the touch screen to start working again? It is not a hardware problem, unless mal-ware can break the hardware. The touchscreen had been working fine until this happened.
Should I take the tablet back to Best Buy where I bought it at least a year (maybe 2 years) ago? I don't know if it's still under warranty.
I have over 20 year of experience as a software developer, but not for Android. I am not very experienced with doing anything to hardware.
Should I try to fix it myself?
I have never rooted any Android device and I'm not sure what that means, either.
I've never re-installed the ______ ? (rom? image? Odin?)
I read on this and/or other forums that there's a way to replace something, but the instructions were beyond my level of understanding. I would need the procedures to be broken down into steps which don't assume too much about what I know.
I understand how to download a file to Windows, given a URL for it. I understand what a zip file is and how to extract it. I understand how to press hardware buttons and plug in cables, and do these steps in the order I'm told.
I don't understand what I'd use to get the downloaded whatever-they-are onto the tablet to replace whatever-the-other-thing-is so that the touchscreen works again.
As far as I know, Odin is a Norse god.
The only firmware updates I've ever done are the ones that the device does on it's own through Samsung's updates.
I'd deeply appreciate getting this device back since I have extremely limited funds and probably won't be able to buy a replacement.
Thank you,
Linda
Click to expand...
Click to collapse
Definitely sounds like malware. You have two choices that I see, either root and custom rom or flash back to stock. Since you are stock you'd just be overwriting your existing install. Read this thread and decide your course of action http://forum.xda-developers.com/showthread.php?t=2203309
Bought a Nexus 5 about 6 months ago USED. It has been amazing. I got the latest OTA a week ago or so, not sure if that has anything to do with current issues.
About 2 days ago started randomly restarting. Today, it shut down and has been in continuous loop restarting. I see "Google" and maybe even the boot dots loading, then it is off. Three seconds later, starts again and repeats. Never makes it all the way into Android system. I let it sit for a while and when I pick it up, without touching any buttons, it repeats all of this. I suppose it is probably dead in general, but I don't know. Do you guys have any ideas? Again, I bought it used and from a ma/pap store who said they buy 100 in bulk, which made me skeptical, but they also had a 60 day guarantee and it was amazing the first 60 days and even after. It has been error free for 6 months, so I don't know if this is just a random issue or if the previous owner dropped it in a lake and I got lucky, or what. FWIW the damn thing has been in a case and never dropped, so it isn't anything that I have done I don't think. Thanks for any help.
edit: never rooted, never messed with, always been stock
Another user reported some instability since the last OTA update.
Flashing the full factory images did the trick.
a friend of mine gave me his nexus 5 to repair and its doing something similar. He had ir rooted and on latest 5.1.1 (i think). Either way, he said it was randomly locking up and rebooting. When i got it it had the red blinking light when plugged so i got a new battery. That got fixed but then the constant bootloop showed itself. I flashed TWRP (many versions, 2.6.3.1; 2.7.1.1; 2.8.7.1; the one that worked best was 2.7.1.1). So, once in twrp wiped, pushed cm 12 snapshot, flashed it, pushed gapps, falshed, pushe supersu flashed. Started the system. That precise order of things (ie: pushing flashing, then pushing something new and flashing it) was what gave me best results to actually boot up at least once. Once booted up and logging in and everything to cm i had some sort of stability (even rebooting and powering off) but i think that everything went wrong when i plugged the phone to the computer and it was back to bootloops and not even getting to the recovery. Flashed everything again. Didnt work. Had to leave the phone sit for a while (without the back casing) before trying again, in order, before getting any success. Im starting to think of ovrheating but it doesnt even get that hot...
Dunno if you guys have any ideas on this. Or if i can give you mor details to help us out.
Regards!
Looks like I'm having a similar problem to what is described here, as well as http://forum.xda-developers.com/google-nexus-5/help/bootlooped-dont-how-to-enable-debugging-t3215951
I've had one of my Nexus 5 phones running OmniROM 5.1.1 for some time now, very stably. After trying out the Marshmallow preview and going back to that ROM, I started having spontaneous hard reboots and hard crashes. The phone would often boot loop before even getting to the OmniROM boot animation. It was also very recalcitrant about entering and staying in the boot loader, rebooting spontaneously shortly after rendering the boot loader screen. I was occasionally able to "grab" control long enough to get it to boot into TWRP, from which a boot to Android seemed to usually get it out of the loop and into running Android.
I've flashed back the boot loader and baseband from factory-stock 5.1.1 LMY48M (HHZ12h and 2.0.50.2.26) using the flash-base.sh script from a freshly downloaded and extracted hammerhead-lmy48m. Things appeared to be OK last evening and this morning, but things got worse today.
Now the phone is in a state where it is not responsive to the power button when unplugged. I can hold it down for 30 seconds with no response.
If I plug in USB, it spontaneously starts rebooting, not showing more than about two seconds of the Google boot loader screen. If I hold the down-volume button, I can get the boot-loader screen, but no matter how fast I try to be, I can't select anything more than "Restart bootloader" (or "Power off") option before it spontaneously reboots (to boot loader).
As far as I know, the battery had a significant charge before this started happening.
I see the same behavior if the phone is connected to a USB charging source, rather than a USB port.
I've tried pulling the SIM, but that doesn't change the behavior.
adb wait-for-device never returns, so poking it over adb doesn't seem to be an option.
fastboot devices also doesn't see the phone, for the brief time the boot loader is running.
Any suggestions on how to get this into the boot loader so I can at least re-flash it?
Nexus 5 D820(E) 32 GB
Edit:
WaxLarry said:
In my opinion your problems seems power button's related.
Click to expand...
Click to collapse
Trying to see how I can "clean" or "clear" the power button now.
Edit:
Paul22000 said:
This morning my Nexus 5 was turned off all of a sudden after not having used it for 20-30 minutes. I held the power button and nothing. I plugged it into power and the "Google" screen appeared. It then went into a reboot loop on and off, on and off, on and off. I held the Volume Buttons and it went into fastboot, but then boot looped out again and again. Searching on Google yielded that this was indeed a common problem. [...]
Click to expand...
Click to collapse
Edit: Repeatedly pressing the power button seems to have temporarily allowed a boot to Android.
In retrospect, I had noticed over the last few days that the phone didn't seem to respond properly to the power button, either "ignoring" it, or when a second press got things started, it would unexpectedly come up with the long-press-volume menu.
One link on how to replace the power switch yourself is http://protyposis.net/blog/replacing-the-nexus-5-power-button/
Ok @jeffsf keep going on this thread. I had the same damn experience, that ended with RMA. LG said that the problem is related to some tension change in the power button. After the RMA I used the phone totally stock and never had a problem. Two months ago I switched to blu_spark kernel and some weeks after i noticed some problem. When I pressed the button to lock the screen, phone locked itself and then screen turned on, sometimes showing the shutdown option. So i understood that something was happening to the power button. I tried to overvolt with a +5mV on general offset and since then i never had problem. If you can enter recovery or bootloader i suggest you to flash some kernel with volt change support and then overvolt the general offset... and keep finger crossed
jeffsf said:
Looks like I'm having a similar problem to what is described here, as well as http://forum.xda-developers.com/google-nexus-5/help/bootlooped-dont-how-to-enable-debugging-t3215951
I've had one of my Nexus 5 phones running OmniROM 5.1.1 for some time now, very stably. After trying out the Marshmallow preview and going back to that ROM, I started having spontaneous hard reboots and hard crashes. The phone would often boot loop before even getting to the OmniROM boot animation. It was also very recalcitrant about entering and staying in the boot loader, rebooting spontaneously shortly after rendering the boot loader screen. I was occasionally able to "grab" control long enough to get it to boot into TWRP, from which a boot to Android seemed to usually get it out of the loop and into running Android.
I've flashed back the boot loader and baseband from factory-stock 5.1.1 LMY48M (HHZ12h and 2.0.50.2.26) using the flash-base.sh script from a freshly downloaded and extracted hammerhead-lmy48m. Things appeared to be OK last evening and this morning, but things got worse today.
Now the phone is in a state where it is not responsive to the power button when unplugged. I can hold it down for 30 seconds with no response.
If I plug in USB, it spontaneously starts rebooting, not showing more than about two seconds of the Google boot loader screen. If I hold the down-volume button, I can get the boot-loader screen, but no matter how fast I try to be, I can't select anything more than "Restart bootloader" (or "Power off") option before it spontaneously reboots (to boot loader).
As far as I know, the battery had a significant charge before this started happening.
I see the same behavior if the phone is connected to a USB charging source, rather than a USB port.
I've tried pulling the SIM, but that doesn't change the behavior.
adb wait-for-device never returns, so poking it over adb doesn't seem to be an option.
fastboot devices also doesn't see the phone, for the brief time the boot loader is running.
Any suggestions on how to get this into the boot loader so I can at least re-flash it?
Nexus 5 D820(E) 32 GB
Edit:
Trying to see how I can "clean" or "clear" the power button now.
Edit:
Edit: Repeatedly pressing the power button seems to have temporarily allowed a boot to Android.
In retrospect, I had noticed over the last few days that the phone didn't seem to respond properly to the power button, either "ignoring" it, or when a second press got things started, it would unexpectedly come up with the long-press-volume menu.
One link on how to replace the power switch yourself is http://protyposis.net/blog/replacing-the-nexus-5-power-button/
Click to expand...
Click to collapse
I got a notification for this post since you quoted me. I'm not sure if you're having the same problem but I'll tell you what happened to me, just in case. I called T-Mobile and they referred me to the nearest 3rd party phone repair shop. I went there and after an evaluation, the repairman told me the power button on my phone was indeed broken. They replaced it for $55.
The story doesn't end there though. I took my phone home and a few hours later I tried to use bluetooth and it didn't work. I took it back and found out that unfortunately, when the guy replaced the power button, he inadvertently broke the bluetooth. There's no way to fix bluetooth without replacing the motherboard entirely, which would cost $200. I'd rather buy a new phone at that point since my Nexus 5 was getting old. He refunded me, which was nice. At least the power button worked so I could use my phone. Bluetooth isn't as valuable as being able to you know, turn on the phone, so at least it was a net gain.
After that, I purchased a Nexus 6 and rooted it so I could use double-tap-to-wake (along with the automatic screen on when you pick up the Nexus 6). I also use the following app in order to turn off the screen by swiping up from the home button (I don't care about losing the shortcut to Google Now): Screen Off and Lock
I can now literally go weeks without using the power button on my Nexus 6. (I literally only use it when tap to wake sometimes becomes unresponsive which is rare.)
Bottom line: I will never buy another phone without tap to wake functionality! :good:
A local repair shop here indicated that one sometimes does changing the power switch resolve the issue. They have seen situations where the issue appears to be one of the power-management ICs. Just something to be aware of when examining the potential cost of a repair and who you would have do the work.
Hi,
A month ago, first time screen of my S8 plus (15 months old) went black, i can see the phone is working fine apart from screen, tried force restart, every button combinations available on other forums, nothing worked. After like 10, hours screen went on by itself. It lasted a week and screen went off again. Again same thing, it went back on by it self after few hours. I though it might be the corrupt software, so i flashed the factory rom. But no luck. This cycle kept going on for a month.
Now since last week, screen went dead, not turning back on. I can connect the phone to screen via smart view (Bixby voice helps there surprisingly), and see everything else works fine.
Phone is out of warranty, so i cannt just go to samsung and get a replacement.
Does anyone have any idea, what is going on, and if they have face any similar issue and what to do with it.
Also, one weird thing. I dont know if its related to the issue but I noticed every time after i factory reset or flashed stock rom, some random files start downloading itself via download manager and every time i tap to look for the name or info, it just disappears, tried to find it among apps and file, nothing can be found.
Hello. Sorry in advance if this is the wrong thread. I own a pretty old 1 year old tablet that currently has a problem.
Important info: Android 5, No access to a computer for 2 weeks (vacation), slightly cracked screen (still works), I had to install a Play Store apk as the one I had previously was corrupt. Tablet was functioning fine until the moment of the incident (except for the play store apk, which I later fixed).
Minor detail: Once the screen turns on after a restart the pixels near the top of the screen seem to turn purple for a second when I tilt the tablet.
Here is the story:
I was watching a YouTube video and suddenly my tablet froze. I thought: "Uhh, another freeze how annoying," and waited for it to load. I did not unfreeze. I thought: "Well, I guess I'll be fine if I turn my tablet off and on. This is where I got worried. My Power key was not responding. I tried the volume keys. Nothing. I tried connecting a mouse and moving it around. Still nothing. I thought "Ok, lets try restarting it" I did that by holding the Power key down for 10 seconds. To my relief, it turned off. But when it was turning back on again, it was at the loading screen for a little to long. It usually takes 5 seconds to get past the loading screen and enter the boot screen. I decided to wait. 1 minute: nothing. 5 minutes: nothing. I got worried. I tried restarting the tablet again. I restarted successfully but was stuck at the loading screen again. The was no movement on the screen. Only the loading screen. I decided to try the restart backup button which I could activate by putting a pin in a small hole at the back. It had the same effect holding down the power key had. I decided to ue my backup plan: recovery mode. I successfully entered recovery mode. I chose the option "clear cache" and tried to boot again. No changes. I did a scan for any root errors. it said that there were 5 errors, but there was nothing I could do about that. I tried doing a factory reset, then booting up. The reset was successful, but I got the same effect as always. No changes. I gave up and tried to google a solution on my phone. Most of them told me to install a PC program, but one told me to do the same thing I already did: reset, restart. So I decided to let the tablet sit with the boot screen for 2 hours. When I came back, there was no change at all. I tried searching again for a solution. A YouTube video said that the boot time after factory resets may be long, so I decided to reset and let it sit for a bit. 20 mins later, no changes at all. Finally, I gave up and now try to ask for help here.
Norqw said:
Hello. Sorry in advance if this is the wrong thread. I own a pretty old 1 year old tablet that currently has a problem.
Important info: Android 5, No access to a computer for 2 weeks (vacation), slightly cracked screen (still works), I had to install a Play Store apk as the one I had previously was corrupt. Tablet was functioning fine until the moment of the incident (except for the play store apk, which I later fixed).
Minor detail: Once the screen turns on after a restart the pixels near the top of the screen seem to turn purple for a second when I tilt the tablet.
Here is the story:
I was watching a YouTube video and suddenly my tablet froze. I thought: "Uhh, another freeze how annoying," and waited for it to load. I did not unfreeze. I thought: "Well, I guess I'll be fine if I turn my tablet off and on. This is where I got worried. My Power key was not responding. I tried the volume keys. Nothing. I tried connecting a mouse and moving it around. Still nothing. I thought "Ok, lets try restarting it" I did that by holding the Power key down for 10 seconds. To my relief, it turned off. But when it was turning back on again, it was at the loading screen for a little to long. It usually takes 5 seconds to get past the loading screen and enter the boot screen. I decided to wait. 1 minute: nothing. 5 minutes: nothing. I got worried. I tried restarting the tablet again. I restarted successfully but was stuck at the loading screen again. The was no movement on the screen. Only the loading screen. I decided to try the restart backup button which I could activate by putting a pin in a small hole at the back. It had the same effect holding down the power key had. I decided to ue my backup plan: recovery mode. I successfully entered recovery mode. I chose the option "clear cache" and tried to boot again. No changes. I did a scan for any root errors. it said that there were 5 errors, but there was nothing I could do about that. I tried doing a factory reset, then booting up. The reset was successful, but I got the same effect as always. No changes. I gave up and tried to google a solution on my phone. Most of them told me to install a PC program, but one told me to do the same thing I already did: reset, restart. So I decided to let the tablet sit with the boot screen for 2 hours. When I came back, there was no change at all. I tried searching again for a solution. A YouTube video said that the boot time after factory resets may be long, so I decided to reset and let it sit for a bit. 20 mins later, no changes at all. Finally, I gave up and now try to ask for help here.
Click to expand...
Click to collapse
Was your device rooted? Did you have TWRP custom recovery installed? If you don't have either of these two things then your only option is to flash the stock firmware via PC.
Do a google for:
"Return to stock (your model number)"
If what you need is out there somewhere, that woll find the instructions, the tools and the file(s) you need.
Sent from my LGL84VL using Tapatalk
Hey everyone who reads this.
I'd like to start my topic with apologising if I post this in the wrong section.
So, I have a LG Spirit H440N LTE for about 3 years now, maybe a little less. I've always taken good care of it, both physically and in updates / security wise aswell.
My phone has been working flawlessly until the last 2 days. 2 days ago i was charging my phone, and when it vibrated (meaning its 100%) I pulled the cable off, and pressed the power button (power button locks - unlocks the screen) the screen didn't turn on. I was like "wow that's strange" but didn't care much, i just kept pressing the button every 5-6 seconds, nothing.
At that point I pulled the battery out, let it sit for a short time and then put it back, start the phone, I felt the vibration (meaning it's starting up) but no screen, so my first idea was that I need to get a new firmware and completely reinstall my phone, as it seems like it got bricked.. for no reason, by itself ? Strange thing but I accepted it and literally been googling for 9 hours now and I find more and more issues.
After I got LG FlashTool, drivers, and even 3 different firmwares, I wanted to start the phone in download mode to start upgrading, but even though I held down "volume up for 5 seconds and then put the usb cable in" nothing happened, no screen, my PC didn't recognise the phone either.
So I got a little bit mad and pulled the cable out from the phone, I wanted to remove the battery, but out of nowhere the phone suddenly started loading in, screen working completely fine, i could do whatever i want, so my first thing was to do a hard reset. After the hard reset I set up my usual stuff (important apps etc) and I locked the screen so my battery won't go down. Little did I know, I ****ed up again, because ever since that happened, I can't get my screen to work again. I tried everything I could but my PC still doesn't recognise the phone (even after a LOT of drivers being installed), charging the phone doesn't do anything. Regardless if I remove - put back the battery no screen, no screen in download - hard reset mode either, it's just completely black.
I'd like to have some sort of help, because I am just completely out of ideas, I really feel like a firmware change could fix the phone, but if the computer doesn't recognise it, I have no idea what to do.
rawon3 said:
Hey everyone who reads this.
I'd like to start my topic with apologising if I post this in the wrong section.
So, I have a LG Spirit H440N LTE for about 3 years now, maybe a little less. I've always taken good care of it, both physically and in updates / security wise aswell.
My phone has been working flawlessly until the last 2 days. 2 days ago i was charging my phone, and when it vibrated (meaning its 100%) I pulled the cable off, and pressed the power button (power button locks - unlocks the screen) the screen didn't turn on. I was like "wow that's strange" but didn't care much, i just kept pressing the button every 5-6 seconds, nothing.
At that point I pulled the battery out, let it sit for a short time and then put it back, start the phone, I felt the vibration (meaning it's starting up) but no screen, so my first idea was that I need to get a new firmware and completely reinstall my phone, as it seems like it got bricked.. for no reason, by itself ? Strange thing but I accepted it and literally been googling for 9 hours now and I find more and more issues.
After I got LG FlashTool, drivers, and even 3 different firmwares, I wanted to start the phone in download mode to start upgrading, but even though I held down "volume up for 5 seconds and then put the usb cable in" nothing happened, no screen, my PC didn't recognise the phone either.
So I got a little bit mad and pulled the cable out from the phone, I wanted to remove the battery, but out of nowhere the phone suddenly started loading in, screen working completely fine, i could do whatever i want, so my first thing was to do a hard reset. After the hard reset I set up my usual stuff (important apps etc) and I locked the screen so my battery won't go down. Little did I know, I ****ed up again, because ever since that happened, I can't get my screen to work again. I tried everything I could but my PC still doesn't recognise the phone (even after a LOT of drivers being installed), charging the phone doesn't do anything. Regardless if I remove - put back the battery no screen, no screen in download - hard reset mode either, it's just completely black.
I'd like to have some sort of help, because I am just completely out of ideas, I really feel like a firmware change could fix the phone, but if the computer doesn't recognise it, I have no idea what to do.
Click to expand...
Click to collapse
You might be having hardware issues, such as a faulty power button. If you are the type of user that frequently presses the power button to lock/unlock the screen, this leads to excessive wear on the button components, this is why some users prefer to use the "tap to sleep" and "tap to wake" feature, to avoid wearing the power button out. On my LG, this feature is called "KnockOn", it's located in Accessibility settings.
Sent from my LGL84VL using Tapatalk