Database Info

Bricked phablet please help

Hi guys got the Excelvan ET704 tablet (phablet) it's a 3g phone tablet dual sim unlocked.
I had made a backup with MTK droid tools,and upon restore i got nothing just a black screen now,so i tried a hundred times to get something from the backups to run i flashed it 1st time with the recent backup made,and it then failed to register the usb saying unrecognized,eventually i did manage to flash only one of the earlier backups by holding volume down and pressing the reset hole at the back whilst holding volume down button.
Then i inserted the cable the flash succeeded and it said done,but on the bottom it says 29gb+4096mb unknown emmc? I know it's a 4gb rom what is going on and does anyone know where to get a rom please the model number is known to be a K7206 it's build is K7206_QSVGA_V10 an it's 1200x600 resolution a 7" tablet phone dual sim and 3g,.
Looking in mobile uncle tools said bird72_a_wet_jb3 ,other than this i am completely stuck,i have emailed excelvan but obviously it being tonight there's not going to be a reply any time soon if at all.I really could do with the firmware for the device,i tried to fromat before but it fails every time there is also no preloader file in the backup?
Here is a screenprint of a flash with the firmware i backed up and it ends with a green box after a yellow bar at the end.It's a screenshot of a flash in progress showing what i get happening as i flash it.

Excelvan ET704 recovery
I don't answer you questions but maybe I will able to help you if you or someone help me unlock my Excelvan then I can dump ROM for you.
My Excelvan ET704 is blocked by some kind of police virus.
I have no access to any settings, apps and etc..
I need to restore it to factory default but don't know how to get in recovery mode. Combinations of hardware buttons PWR +VOL UP or VOL DOWN don't work.
Someone know how to restore it or unlock?

[Q] Is my Lenovo A850+ bricked? If not how can I fix it?

Hello all.
I just received my Lenovo A850+ today that I bought from China (via ebay). After charging it to full I put in my o2 Sim and blank micro-SD card and started having a play with the phone. (It worked fine before I started messing). Noticing there was no google play store I set about finding a way to put it on. The first thing (perhaps wrongly) i did was install some lenovo usb drivers that some site told me to use with the idea I would flash a custom rom (which i never did in the end) and enabled usb debugging.
I tried to root the phone with a program called Xroot, which unsuccessfully rooted the phone, then I downloaded a new version which updated to Xroot 1.7.7 and that supposedly successfully rooted the phone. It also installed a new app with a name similar to xroot which i then opened. It has what looked like an app manager so i started deleting apps that i thought were unnecessary (bloatware). Suddenly the list of apps changed and the phone froze. I took out the battery and attempted to restart the phone. I now have the following problem:
After hitting the power button the phone it vibrates once, plays an animation and then gets stuck on the logo screen:
Left like this it occasionally vibrates once every 20secs or so but doesnt load any further. When plugged into my PC via usb, after a minute or so my pc recognises the device (but not removable storage and CD Drive (D Lenovo Suite (an exe) pops up. after installing a chinese software suite is installed, which does pop up when my phone is plugged in.
The phone only responds when i hold the power button, which turns it off. Basically I want to fix my phone, hopefully without sending it back to china. I assumed I could just get into a recovery menu and factory reset it. I dont think I can. I can get into the following 3 menus:
factory mode: (power+volumeUp) I dont read chinese, the top few seem to be info/component checks, the bottom one restarts the phone and the eMMC option doesn't fix anything.
recovery mode: (power+volumeUp+volumeDown)Has a menu with power off, reboot, wipe user data (didnt fix anything) and install update package (i tried copying an official rom onto root of sd card but it doesnt recognise it (it looks like it specifically wants a zip called update.zip) i even renamed but didnt help.
meta mode: (power+volumeDown) Doesn't appear to do anything and has no options.
Does any1 have suggestions on how I can perform a factory reset/install a rom or fix my phone or is it just bricked? If you want me to try anything just post and I will give it a go.
Thankyou.

Capiech said:
Hello all.
I just received my Lenovo A850+ today that I bought from China (via ebay). After charging it to full I put in my o2 Sim and blank micro-SD card and started having a play with the phone. (It worked fine before I started messing). Noticing there was no google play store I set about finding a way to put it on. The first thing (perhaps wrongly) i did was install some lenovo usb drivers that some site told me to use with the idea I would flash a custom rom (which i never did in the end) and enabled usb debugging.
I tried to root the phone with a program called Xroot, which unsuccessfully rooted the phone, then I downloaded a new version which updated to Xroot 1.7.7 and that supposedly successfully rooted the phone. It also installed a new app with a name similar to xroot which i then opened. It has what looked like an app manager so i started deleting apps that i thought were unnecessary (bloatware). Suddenly the list of apps changed and the phone froze. I took out the battery and attempted to restart the phone. I now have the following problem:
After hitting the power button the phone it vibrates once, plays an animation and then gets stuck on the logo screen:
Left like this it occasionally vibrates once every 20secs or so but doesnt load any further. When plugged into my PC via usb, after a minute or so my pc recognises the device (but not removable storage and CD Drive (D Lenovo Suite (an exe) pops up. after installing a chinese software suite is installed, which does pop up when my phone is plugged in.
The phone only responds when i hold the power button, which turns it off. Basically I want to fix my phone, hopefully without sending it back to china. I assumed I could just get into a recovery menu and factory reset it. I dont think I can. I can get into the following 3 menus:
factory mode: (power+volumeUp) I dont read chinese, the top few seem to be info/component checks, the bottom one restarts the phone and the eMMC option doesn't fix anything.
recovery mode: (power+volumeUp+volumeDown)Has a menu with power off, reboot, wipe user data (didnt fix anything) and install update package (i tried copying an official rom onto root of sd card but it doesnt recognise it (it looks like it specifically wants a zip called update.zip) i even renamed but didnt help.
meta mode: (power+volumeDown) Doesn't appear to do anything and has no options.
Does any1 have suggestions on how I can perform a factory reset/install a rom or fix my phone or is it just bricked? If you want me to try anything just post and I will give it a go.
Thankyou.
Click to expand...
Click to collapse
you can go download a rom from needrom dot com.
there two roms there.
the official older is multilaguage and the newer is english/chinese.
sorry, but cannot post a link.

You need:
1. Flash tool
2. ROM (official or custom)
see instructions here: www*needrom*com/mobile/lenovo-a850/

thanks fixed now

hi i have same problem here and my laptop cant detect my device
i try to flahing new rom and restore from twrp but my phone still stuck at logo
help me please

ojik said:
hi i have same problem here and my laptop cant detect my device
i try to flahing new rom and restore from twrp but my phone still stuck at logo
help me please
Click to expand...
Click to collapse
You need to install the ADB drivers and the Drivers for your device. If they are both installed you can check if your device is recognised by PC by typing this command: "adb devices". If you don't know how to use ADB I posted a helpful tool.
Then you need to download a ROM on your PC and then flash it via Sideload to your device.

Possible bricked A850+
Have a possible bricked A850+ I tried to install custom recovery as I wanted a custom rom and it wanted SuperSU we installed but it failed to update binary 3 times on normal, when turned I it off and back on again it was stucked in the boot screen.:crying:
I have tried to wipe all date via Recovery which I can access but still no luck with the ordinary boot, when trying to use flash tool absolutely nothing happens when the phone is connected, so can anybody in here help with my problem?
Thanks in advance
Bregnhoj

Im trying to fix my GFs phone its stuck on the boot screen when the phone got turned off during an update
I got ADB installed and can see it in the CMD but its not showing my phone as connected,
I suspect this is because I dont have USB debugging enabled but seems the phone cant turn on i cant enable it, ive spent a few hours googling and googling but i cant find any way to get anything to work seems it wont connect to the phone
The phone does show up on my drives list when plugged in but it does not show up as an android device in the device manager. Am i screwed or is there another way to fix this?
Every single thing i try has "Make sure USB Debugging is enabled." ......
is there some way to enable it when i cant get the phone turned on....

Mega brick
Hi all,
I have mega bricked my A850 with flash tool trying to install custom ROM. When I click, hold or whatever, nothing happens. USB not responding at all, LEDs not flashing. Is there a method or place where I could bring it back to life?

I have a Lenovo A850+ thats always rebooting/restarting automatically, i can't also send sms. What is the problem and solutions? Thanks... Hoping for immediate response.

ejpolaron said:
I have a Lenovo A850+ thats always rebooting/restarting automatically, i can't also send sms. What is the problem and solutions? Thanks... Hoping for immediate response.
Click to expand...
Click to collapse
Try to install stock firmware

[Q] How To Install Custom FW?? Help!!!!

Hello everyone,
I got Atrix 2 from my friend. I really like the phone except few things:
1. I can't arrange the icons manually.
2. Mine is Indian version mobile & it doesn't support any Call Recorder. I can install the recording app, but it is not working.
3. There is no bubble type notification for any app like - WhatsApp, Gmail, Facebook etc.
4. There is no quick access Icons in notification area for Bluetooth, Mobile Data, Wi-Fi etc like Samsung.
This is my first Android phone so I don't know anything about CFW & how to install in my phone.
Anyone please help me to install CFW step by step
I'm Running Android 4.0.4 Official Firmware.
When I Press and hold the Power and Volume down buttons, a black screen appears says:
AP Fastboot Flash Mode (S)
0A.73
Battery OK
OK to Program
Connect USB
Data Cable​
When I Press and hold both Volume Up & Down + Power, a black screen appears says:
Boot Mode Selection Menu (0A.73)
Vol Up Selects, Vol Down Scrolls
Available Boot Modes:
Normal Powerup
Recovery
AP Fastboot
BP Tools​
When I select Recovery, First show the Moto Emblem & then stuck with logo with triangle exclamation .
When I select Fastboot & BP Tools, my boot as normal.
1. What is Recovery Mode? How to install this?
2. What is ROOT? How to ROOT?
3. Which one do first - Install Recovery Mode or ROOT?
4. If I need to install CFW, do I need to copy all the files in Memory card or use RSD (I seen one video in youtube)?
SEEN LOTS OF POSTS SAYING 'HOW TO INSTALL CUSTOM ROMS' & I MORE CONFUSED WITH Recovery Mode, ROOT, RDS.
IF THERE IS A DOWNLOAD LINK, IT'S OK. BUT PLEASE DON'T GIVE LINK TO 'FOLLOW THIS'!!!​

vichumvk said:
Hello everyone,
I got Atrix 2 from my friend. I really like the phone except few things:
1. I can't arrange the icons manually.
2. Mine is Indian version mobile & it doesn't support any Call Recorder. I can install the recording app, but it is not working.
3. There is no bubble type notification for any app like - WhatsApp, Gmail, Facebook etc.
4. There is no quick access Icons in notification area for Bluetooth, Mobile Data, Wi-Fi etc like Samsung.
This is my first Android phone so I don't know anything about CFW & how to install in my phone.
Anyone please help me to install CFW step by step
I'm Running Android 4.0.4 Official Firmware.
When I Press and hold the Power and Volume down buttons, a black screen appears says:
AP Fastboot Flash Mode (S)
0A.73
Battery OK
OK to Program
Connect USB
Data Cable​
When I Press and hold both Volume Up & Down + Power, a black screen appears says:
Boot Mode Selection Menu (0A.73)
Vol Up Selects, Vol Down Scrolls
Available Boot Modes:
Normal Powerup
Recovery
AP Fastboot
BP Tools​
When I select Recovery, First show the Moto Emblem & then stuck with logo with triangle exclamation .
When I select Fastboot & BP Tools, my boot as normal.
1. What is Recovery Mode? How to install this?
2. What is ROOT? How to ROOT?
3. Which one do first - Install Recovery Mode or ROOT?
4. If I need to install CFW, do I need to copy all the files in Memory card or use RSD (I seen one video in youtube)?
SEEN LOTS OF POSTS SAYING 'HOW TO INSTALL CUSTOM ROMS' & I MORE CONFUSED WITH Recovery Mode, ROOT, RDS.
IF THERE IS A DOWNLOAD LINK, IT'S OK. BUT PLEASE DON'T GIVE LINK TO 'FOLLOW THIS'!!!​
Click to expand...
Click to collapse
If this is your first android then you're going about it all wrong. It is highly recommended that you take the time to read about what you're doing and what you need to do to get to where you want to be with this phone. I'm strongly opposed to reiterating step by step directions because I feel it leads to trouble for new users that, too quickly, get in over their heads without the necessary knowledge to get themselves out of trouble but I'll help you with some general info to get you started. :thumbup:
The very first thing you should do is find out which FXZ (stock firmware) is the correct one for your specific phone. Then you'll need to download RSD lite and familiarize yourself with how to use it for flashing the stock firmware. If/when it becomes necessary to use these tools you'll be glad that you took the time to learn rather than searching and posting frantically to figure out how to recover a soft brick.
Stock recovery is useless for what you're trying to accomplish.
There are multiple root methods available and can be found in both the general section as well as the development section. After you get rooted you'll need to download and install Boot Menu Manager (aka BMM) in order to install custom ROMs. There are tutorials on how to install and use BMM in the general section.
The most important tool you can have at this stage is patience. Take the time to educate yourself and you won't be sorry. Good luck and welcome to the community.

Thank you 1BadWolf.
I don't know which FXZ (stock firmware) is the correct for my phone.
This is my phone datails
Can u tell me which FW is that & download link?
Before flashing with the stock firmware, I need to backup all my data. How do I do that?

vichumvk said:
Thank you 1BadWolf.
I don't know which FXZ (stock firmware) is the correct for my phone.
This is my phone datails
Can u tell me which FW is that & download link?
Before flashing with the stock firmware, I need to backup all my data. How do I do that?
Click to expand...
Click to collapse
At the top of your screenshot you'll see the system version as
672.1.18.MB865.AsiaRetail.en.03
Go to this page:
http://sbf.droid-developers.org/phone.php?device=17
And find the corresponding firmware that will say
Blur_Version.672.1.18.MB865.AsiaRetail.en.03
That's the one you need.
I'd say that once you download that and RSD lite then familiarize yourself with what to do with it via:
http://forum.xda-developers.com/showthread.php?t=1909319
then you be safe to go ahead and root it. You'll need root to get a good backup of everything anyway. The main thing is learning to recover from a soft brick before it happens. That thread has all the info you need for that.

1BadWolf said:
At the top of your screenshot you'll see the system version as
672.1.18.MB865.AsiaRetail.en.03
Go to this page:
http://sbf.droid-developers.org/phone.php?device=17
And find the corresponding firmware that will say
Blur_Version.672.1.18.MB865.AsiaRetail.en.03
That's the one you need.
I'd say that once you download that and RSD lite then familiarize yourself with what to do with it via:
http://forum.xda-developers.com/showthread.php?t=1909319
then you be safe to go ahead and root it. You'll need root to get a good backup of everything anyway. The main thing is learning to recover from a soft brick before it happens. That thread has all the info you need for that.
Click to expand...
Click to collapse
Today I flashed my Atrix 2 with stock ROM that u given in the link.:good:
It is successful without any bricks & errors.
I also followed the video that in YouTube:good:
When the first boot after flashing, the screen was locked & when I try to unlock, it won't unlock.
So followed this thread & tried with the SIM. It worked.
And I aslo find how to get wipe/reset data & cache in stuck with logo with triangle exclamation .
When appear this triangle exclamation, just hold both Volume Up+Volume Down button.
What is the next thing I need to do? ROOT?

vichumvk said:
Today I flashed my Atrix 2 with stock ROM that u given in the link.:good:
It is successful without any bricks & errors.
I also followed the video that in YouTube:good:
When the first boot after flashing, the screen was locked & when I try to unlock, it won't unlock.
So followed this thread & tried with the SIM. It worked.
And I aslo find how to get wipe/reset data & cache in stuck with logo with triangle exclamation .
When appear this triangle exclamation, just hold both Volume Up+Volume Down button.
What is the next thing I need to do? ROOT?
Click to expand...
Click to collapse
That's it. Just root and install BMM then you'll be ready to go. After that comes the hard part.... deciding which of the awesome ROMs to install, hahaha. :sly:

I rooted my phone with these downloaded tools.
And installed almost 4.4.4 CFW without any brick & errors.
I like LiquidSmooth 4.4.4.
I found these helpful links for Beginners:
1. Beginners Guide
2. Tutorial For Official Firmware
3. Tutorial For Custom Firmware
4. Tutorial Thread
AND
Senior Member 1
Senior Member 2
Thank you 1BadWolf & Aceofzeroz​

[HELP!][Lava Iris 349] After Flashing RECOVERY.PAC, UNIT dead...

Hi!
I need help please.
I own a Lava Iris 349 (Cloudphone Ice350e here in the Philippines). I have been SUCCESSFULY flashing of stock roms and custom roms, rooting and installing recovery thru MOBILEUNCLE for this unit several times already then this happened:
Last night, I went to flash the stock ROM V7 through ReasearchDownload. It went well and rebooted well... Next is I rooted the unit using iRoot and it goes normally, rebooted well. Next is I decided to shift from Mobileuncle in installing recovery and instead wanted to try flashing the RECOVERY.PAC through Research download for the FIRST TIME. I proceeded with the process and flashed the said recovery just like any ROM.PAC without realizing that there has to be some unchecking to be done in the settings if you are flashing a RECOVERY file. (Flashing a ROM file doesn't require any modifications in the settings)...
The flashing countinued and it was successful... But NOT really... This time, my unit WON'T CHARGE, WON'T TURN ON, CAN'T BE DETECTED BY ReasearchDownload AND WON'T REACT to anything I do.... It is DEAD... I mean it is practically DEAD...
Someone told me that since I flashed a recovery.PAC just like it's a rom.PAC, it only means that after wiping everything, the system, the data, the cache, the recovery.PAC doesn't contain anything to replace these files (unlike a rom.pac) and the effect was the unit simply became BLANK with no programs to interpret any physical manipulation to the phone. It won't and can't interpret anything like CHARGING, PRESSING THE POWER BUTTON and CONNECTING TO A PC... It simply became a piece of USELESS HARDWARE... Because no software has been intsalled or whatsoever...
Click to expand...
Click to collapse
Now, I am appealing to people here if there is still a way or technique to fuly revive my unit...
Help will always be appeciated...

Solved by myself...
------------ I followed this tut.... ------------------------ TO fully flash your phone.
1. Open Researchdownload
2. Load packet and look for file(first button)
3. Remove check in the following selection
✓EraseRuntimeNV
✓PHASE_CHECK
✓EraseCache
✓EraseData
✓EraseMisc
4. Click in BACKUP page, and UNCHECK ALL and press OK
5. And lastly press the Play button to continue flashing. -------------------
http://firmwares2you.blogspot.com/2014/10/cloudfone-ice-350e-stock-rom-to-unbrick.htmlCredits to this BLOG:

pROAddicts said:
Solved by myself...
------------ I followed this tut.... ------------------------ TO fully flash your phone.
1. Open Researchdownload
2. Load packet and look for file(first button)
3. Remove check in the following selection
✓EraseRuntimeNV
✓PHASE_CHECK
✓EraseCache
✓EraseData
✓EraseMisc
4. Click in BACKUP page, and UNCHECK ALL and press OK
5. And lastly press the Play button to continue flashing. -------------------
http://firmwares2you.blogspot.com/2014/10/cloudfone-ice-350e-stock-rom-to-unbrick.htmlCredits to this BLOG:
Click to expand...
Click to collapse
Research download cant detect phone, are there anything to press while conneceting with usb???????????????

Please anyone tell me the flashing procedure in detailss
Sent from my MI 4W using XDA-Developers mobile app

MATE 7 L-09 bricked and dead

Hello
I have a Mate 7 L-09 and I am in the same situation of Sassan_Payehdar described in the his thread
Hi everyone,
I have a Huawei Mate 7 LT-09 16 gig, and I recently did these works:
1. The installed rom was android 6 B513.
2. I read a post in this forum (that is closed now) and updated it to B553 KingVIP Chinese through restoring nandroid TWRP backup.
3. After install I saw lots of bugs, so I wipe all partitions through advanced wipe in TWRP.
4. Then install marshmallow stock recovery using mobopx tool.
after that nothing works.
The USB drive just show hisuite CD-Rom and device not recognize for ADB Options in windows 7,8,8.1 and 10.
There is no recovery,
There is no option using combinations of the buttons vol+,Vol- and power.
I tried installing stock ROM through .app file and dload folder and still nothing works.
I tried Jtag and after lots of work, fastboot screen appears and reinstalling all versions of different recoveries and looks like the software is installing nowhere in neverland!, there is nothing!
I take my device to a technician and he said there is maybe no way to re-run the device. I really need help.
Apologize for poor English and thanks in advance help.
Click to expand...
Click to collapse
No bootloader, no recovery, no option using combinations of the buttons vol+,Vol- and power, no recognition by ADB on PC only huawei logo.
He tried Jtag to appear fastboot, but I never read anything about Jtag. Where can I find it and how to use it?
Sorry for my English.
Can somebody help me?
Thank you so much!!
Al

What happens when you enable your phone (after shutdown) with pressing power + volume up?
Also, what happens when you do the same but with power + volume down?
I would say that if it loads the logo you should be able to enter fastboot/recovery.
Focus on this first and what is your experience with using custom roms to give us an idea of what could be overlooked etc.
If you can load to fastboot and/or recovery let us know and we start from there.

Mother_Teresa said:
What happens when you enable your phone (after shutdown) with pressing power + volume up?
Also, what happens when you do the same but with power + volume down?
I would say that if it loads the logo you should be able to enter fastboot/recovery.
Focus on this first and what is your experience with using custom roms to give us an idea of what could be overlooked etc.
If you can load to fastboot and/or recovery let us know and we start from there.
Click to expand...
Click to collapse
Thank you very much for the answer......
Ok...
I can' t swich off the phone. When I press power off button it reboot and after a few seconds appears huawei logo and then nothing more happens.
When I try to press VOL- and power or VOL+ and power or any other combination of buttons it happens the same think written above: the phone reboot and after a few seconds appears huawei logo and stop.
I brought the phone to the huawei customer center and they told me it need to change motherboard to fix it but it is out of production. I brought it to two famous Chinese stores to fix phones here in Milano, but they couldn't do anything (so they said).
I would just like to retrieve the use of the phone. I saved all the data.
Thanks again for the help.
Al

verdiverdi said:
Thank you very much for the answer......
Ok...
I can' t swich off the phone. When I press power off button it reboot and after a few seconds appears huawei logo and then nothing more happens.
When I try to press VOL- and power or VOL+ and power or any other combination of buttons it happens the same think written above: the phone reboot and after a few seconds appears huawei logo and stop.
I brought the phone to the huawei customer center and they told me it need to change motherboard to fix it but it is out of production. I brought it to two famous Chinese stores to fix phones here in Milano, but they couldn't do anything (so they said).
I would just like to retrieve the use of the phone. I saved all the data.
Thanks again for the help.
Al
Click to expand...
Click to collapse
Not being able to to overcome the logo boot is unknown to me. Maybe the phone should still be able to be flashed!
I lack the knowledge, but to help out I share a link to someone having a similar issue. I will share the link at the end of this post.
If you are unable to connect to your phone and/or make it enter fastboot or recovery I have no idea if that means your phone is bricked.
For now, make sure you understand how to flash,boot,reset etc your phone, only to be sure you have tried all approaches.
Let us know if you did not succeed also so others can learn from this thread in the future
similar topic link -> https://forum.xda-developers.com/mate-7/help/mate-7-booting-t3585079

Mother_Teresa said:
Not being able to to overcome the logo boot is unknown to me. Maybe the phone should still be able to be flashed!
I lack the knowledge, but to help out I share a link to someone having a similar issue. I will share the link at the end of this post.
If you are unable to connect to your phone and/or make it enter fastboot or recovery I have no idea if that means your phone is bricked.
For now, make sure you understand how to flash,boot,reset etc your phone, only to be sure you have tried all approaches.
Let us know if you did not succeed also so others can learn from this thread in the future
similar topic link -> https://forum.xda-developers.com/mate-7/help/mate-7-booting-t3585079
Click to expand...
Click to collapse
Ok
that's unbelievable I was be able to access in fastboot&rescue mode....
I connected the device to my pc but ADB doesn't recognized it.
Now how can I do?
Many thanks
Al

I have same problem as u before, i managed to go to fastboot and then i installed a recovery but the probleme, i bring it into a repair store and the dude literally broke my sd card slot so now I'm really upset.
After that i wanted to make a restore to proposed backups in the firmware forum but nothing happend

Foxar26 said:
I have same problem as u before, i managed to go to fastboot and then i installed a recovery but the probleme, i bring it into a repair store and the dude literally broke my sd card slot so now I'm really upset.
After that i wanted to make a restore to proposed backups in the firmware forum but nothing happend
Click to expand...
Click to collapse
Good
now I am in this situation: I was able to install TWRP recovery for Marshmallow 3.0.2-0 Mate 7 by Mobopx v.2.1.
I chose this recovery beecause my last firmware was EMUI 4.0 (Marshmallow).
After I tried to apply this method: http://ministryofsolutions.com/2016...09tl10-bootloop-after-marshmallow-update.html, but it didn't work. After flashing I power on the phone and it try to boot (some times the animation start too for a bit) but then nothing. The phone reboot in recovery mode (this is a change compared to before).
Somebody has some ideas??
Thanks
Al

verdiverdi said:
Good
now I am in this situation: I was able to install TWRP recovery for Marshmallow 3.0.2-0 Mate 7 by Mobopx v.2.1.
I chose this recovery beecause my last firmware was EMUI 4.0 (Marshmallow).
After I tried to apply this method: http://ministryofsolutions.com/2016...09tl10-bootloop-after-marshmallow-update.html, but it didn't work. After flashing I power on the phone and it try to boot (some times the animation start too for a bit) but then nothing. The phone reboot in recovery mode (this is a change compared to before).
Somebody has some ideas??
Thanks
Al
Click to expand...
Click to collapse
Wonderful!!!!!!
I solved my problem!!!!!
I flashed a TWRP backup get from this forum and now my phone is working.
Thank you to everybody...
Al

I'm very happy for u, can u give me which one you choose for the backup

Foxar26 said:
I'm very happy for u, can u give me which one you choose for the backup
Click to expand...
Click to collapse
Go here
https://forum.xda-developers.com/mate-7/general/huawei-mt7-l09-l10-stock-firmware-ota-t3275784
and choose the appropriate TWRP backp. Flash it by TWRP recovery. It were very simple!!!.
Obviously you have have a working TWRP recovery.....
Hi