Database Info

Still having Tab2 woes

I have an earlier thread here http://forum.xda-developers.com/showthread.php?t=2107600 but that is now buried on page 2 and might be missed by new readers. After a disastrous time trying to root my Galaxy Tab 5100 I did manage with the help of people here to flash the recommended stock ROM - however while the tablet goes through its boot sequenece with the aminated Samsung sign - it sticks when it gets to the plain Samsung logo and wont go further.
Odin reported that it installed OK and the tab rebooted as it should but only this far - not sure what I should try next to get my stock Samsung image back and working. One thing I didn't do was to tick repartition because the instructions only said to do this when a certain type of file was included in the package, and it wasn't. Should I have ticked this after all, if so I can try the same thing again if I can force it back into download mode again. (though as the yellow pane still shows in odin when connected I wonder if I can just go ahead anyway)
I have also been looking for rooting software and came across this
http://root-android.org/?version=Tablet&country=Samsung&ios=Galaxy+Tab+2&submit.x=63&submit.y=104
I am wondering if next time (assuming I ever get it working!) I would be better shelling out $30 and getting software to do it all for me - is this any good? has anyone used it or had reports about it? I wish I had seen this before I read "that it was almost impossible to brick the tab 2"
Also I would like to have root access on my S3 as well but wouldn't dream of risking this I don't think now

gbswales said:
I have an earlier thread here http://forum.xda-developers.com/showthread.php?t=2107600 but that is now buried on page 2 and might be missed by new readers. After a disastrous time trying to root my Galaxy Tab 5100 I did manage with the help of people here to flash the recommended stock ROM - however while the tablet goes through its boot sequenece with the aminated Samsung sign - it sticks when it gets to the plain Samsung logo and wont go further.
Odin reported that it installed OK and the tab rebooted as it should but only this far - not sure what I should try next to get my stock Samsung image back and working. One thing I didn't do was to tick repartition because the instructions only said to do this when a certain type of file was included in the package, and it wasn't. Should I have ticked this after all, if so I can try the same thing again if I can force it back into download mode again. (though as the yellow pane still shows in odin when connected I wonder if I can just go ahead anyway)
Click to expand...
Click to collapse
Have you tried a factory reset from recovery? If you've restored the stock ROM, then all you need to do is the factory reset to get things working again. Don't repartition unless you really need to.
gbswales said:
I have also been looking for rooting software and came across this
http://root-android.org/?version=Tablet&country=Samsung&ios=Galaxy+Tab+2&submit.x=63&submit.y=104
I am wondering if next time (assuming I ever get it working!) I would be better shelling out $30 and getting software to do it all for me - is this any good? has anyone used it or had reports about it? Also I would like to have root access on my S3 as well but wouldn't dream of risking this I don't think now
Click to expand...
Click to collapse
I can't see any reason you should spend that kind of money given how easy the CF-AutoRoot is. In fact, that product looks very shady to me. "Root Any Android Device"? Well, there's lots of devices out there that nobody's been able to root, or devices that take a lot of work. I can't believe there's a single app that'll work across every Android device with a single click.

Be careful, which stock ROM have you flashed? I would use this sequence
flash the stock ROM
then immediately
flash CWM recovery, use CWM recovery to wipe the data (wipe data/factory reset).
Then reboot

CWM ?
DigitalMD said:
Be careful, which stock ROM have you flashed? I would use this sequence
flash the stock ROM
then immediately
flash CWM recovery, use CWM recovery to wipe the data (wipe data/factory reset).
Then reboot
Click to expand...
Click to collapse
Well I followed one of the posted routes on this forum, downloading from a list of recommended files for each version, and it mentioned nothing about CWM which I know nothing about. I have to say that everyone's definition of "easy" on here - I find complicated and difficult - I know my way around windows but android seems much more complex. The only reason I wanted to have root in the first place was to be able to make a complete image back up that would make it easy to restore my device without having to re-download all my software and set up. I do it with windows all the time. To me "easy" is, download and install something - click go - done! Even getting the device to go into download mode in the first place is a very hit and miss affair (as others say on here too) clearly Samsung don't want you to do this.
The other problem is that while the tablet is in this state it wont turn off, just reboots itself when you do and the screen stays on - so unless you leave it plugged in 24/7 - I start each time with a flat battery that I have to recharge before I can try something else

This is the route I followed
DigitalMD said:
Be careful, which stock ROM have you flashed? I would use this sequence
flash the stock ROM
then immediately
flash CWM recovery, use CWM recovery to wipe the data (wipe data/factory reset).
Then reboot
Click to expand...
Click to collapse
I got this through earlier posts - the only thing I didn't do was to go into recovery and reset in step 2 because this simply wasn't possible - the device was stuck on the error message and no amount of button pressing did anything other than restart to the same screen. By this stage I couldn't even go back to check what version of android I was running - it would have been the latest jelly bean distributed to UK.
I also didn't check re-partition as in 6. because there was no pit file in the download
E. Restore to stock
THIS WILL WIPE YOUR DATA!
4.0.3 for p5100: https://hotfile.com/dl/155804946/76b...XALD9.rar.html
4.0.3 for p5110: http://www.hotfile.com/dl/159635395/...3_PEO.zip.html
4.0.4 for p5100: http://www.hotfile.com/dl/165065733/...1_SER.zip.html
4.0.4 for p5113: http://www.hotfile.com/dl/164415704/...5_XAR.zip.html
4.0.? for p5113: http://69.46.67.99/GT-P3113_XAR_1_20...ldcgx9tzmx.zip
4.0.4 for p3100: http://samsung-updates.com/fw/Samsun...3kdo3qe503.zip (PIT files: 16Gb p3100, 8GB p3100
Note: for more language options for stock ROM's for the tab 10, go here.
1. Unzip the downloaded ROM. If there is a file ending in .pit, skip to step 3
2. Reboot into recovery and select wipe data/factory reset.
3. Reboot into Download Mode.
4. Unzip/unrar the stock firmware
5. click PDA and find the stock file (PDA/PLATFORM file, the largest one).
6. Click PIT and open the .pit file you downloaded if one was included with your ROM. Check Re-Partition in ODIN
7. OPTIONAL: if you want to flash the bootloader and/or csc, you can select them as well. If you don't know what that means, you don't need to do it.
8. Click Start.
9. Enjoy!

Help please - this is where I am at the moment - some SIMPLE help needed please
I tried to install what I thought was the stock ROM - it appeared to install but wouldnt boot past the samsung screen. I now realise (a) that I may not have followed the full correct procedure and (b) may have downloaded the 5110 rom instead of the 5100 rom - silly mistake I know.
However reading all the guides I can find there doesnt seem to be a simple way I can find of restoring the standard un-rooted rom so that I can go back and try again. All of the things I can find seem to included downloading something onto the external card but cant do that as I cannot access it and don't have an external card reader.
What I can do now is
boot into download mode
connect to ODIN and see the yellow block
It will not boot normally past the samsung splash screen
and cannot connect to KIES in any mode (I do have the drivers installed and have connected before)
I also have no idea now what is installed on it because I cant get to the system to see!
Is there an easy way to install a stock samsung rom from this point? I don't mind if data is lost, I have nothing important on there and wouldnt mind re-installing apps as I had accumulated far too many anway - really I just want to get my tablet back the way it was from the factory but with the 4.2 jelly bean installed (though if it went back to an earlier version and I could update in Kies that would be ok too)
Can anyone give me simple instructions for doing this using just ODIN and my computer without involving the external card - please.
After that I will be looking for an equally easy way to root it again
I will credit you with a good answer if you can help -as well as appreciating it.

gbswales said:
I tried to install what I thought was the stock ROM - it appeared to install but wouldnt boot past the samsung screen. I now realise (a) that I may not have followed the full correct procedure and (b) may have downloaded the 5110 rom instead of the 5100 rom - silly mistake I know.
However reading all the guides I can find there doesnt seem to be a simple way I can find of restoring the standard un-rooted rom so that I can go back and try again. All of the things I can find seem to included downloading something onto the external card but cant do that as I cannot access it and don't have an external card reader.
What I can do now is
boot into download mode
connect to ODIN and see the yellow block
It will not boot normally past the samsung splash screen
and cannot connect to KIES in any mode (I do have the drivers installed and have connected before)
I also have no idea now what is installed on it because I cant get to the system to see!
Is there an easy way to install a stock samsung rom from this point? I don't mind if data is lost, I have nothing important on there and wouldnt mind re-installing apps as I had accumulated far too many anway - really I just want to get my tablet back the way it was from the factory but with the 4.2 jelly bean installed (though if it went back to an earlier version and I could update in Kies that would be ok too)
Can anyone give me simple instructions for doing this using just ODIN and my computer without involving the external card - please.
After that I will be looking for an equally easy way to root it again
I will credit you with a good answer if you can help -as well as appreciating it.
Click to expand...
Click to collapse
What you need to do is to download the stock ROM for your 5100.
Go to www.samfirmware.com and put "GT-5100" into the search box. You'll see a list of the stock firmware for your device. Pick the appropriate firmware for your country and click "download".
Start up ODIN. Click on the "PDA" button and open the firmware file you downloaded above.
Restart in downloader mode (power and volume up), and connect the tablet to your PC. ODIN should now show the device.
Make sure repartition is not checked, and click on "Start". When it finishes, you now have stock firmware installed.
Power off, then restart in recovery mode. (Hold power and volume down.)
Choose "wipe data/factory reset" by using the volume keys to move the highlight, then pressing the power button to select an entry.
Once it's finished booting, you should be back to normal.

Thanks K1MU for this information which at least looks clear - the only problem I have is when I put in the model etc when I get to country it offers me only 3 choices
UK (BTU) GB (O2) or GB (vodafaone)
My phone was purchased from Amazon and is unlocked so I am worried if these might lock me to a carrier which I wouldn't want
I wonder if BTU is the unlocked one as it doesn't sound like any provider I know - but I am not sure
will post on their forum as well

I think I am getting more and more muddled by the minute (sign of old age I fear) I realise now that I have a p5110 - wifi only and not p5100 3g and wifi.
This means in all probablilty I downloaded the correct rom in the first place. As I had not done the factory reset afterwards so tried that - it appeared to work ok but when I restarted it just played the samsung tune and moving image - then went to "Samsung" and stuck there as it was before.
I am downloading the p5110 wifi only rom from Sam's site - awful download programme they use which doesn't accept paypal even to sign up for faster downloading - I will then try following exactly what you have suggested and keep my fingers crossed

thank you
k1mu said:
What you need to do is to download the stock ROM for your 5100.
Go to www.samfirmware.com and put "GT-5100" into the search box. You'll see a list of the stock firmware for your device. Pick the appropriate firmware for your country and click "download".
Start up ODIN. Click on the "PDA" button and open the firmware file you downloaded above.
Restart in downloader mode (power and volume up), and connect the tablet to your PC. ODIN should now show the device.
Make sure repartition is not checked, and click on "Start". When it finishes, you now have stock firmware installed.
Power off, then restart in recovery mode. (Hold power and volume down.)
Choose "wipe data/factory reset" by using the volume keys to move the highlight, then pressing the power button to select an entry.
Once it's finished booting, you should be back to normal.
Click to expand...
Click to collapse
Although I thought it had got nowhere after wipe restore - when I turned it back the next day I arrived at the start up guide - admitedly it was 4.0.3 and in Portugese but after exploring settings and working out what to click i got it back to uk english - it has now connected to kies ok and is currently downloading the latest firmware - thanks partcularly to the last poster and to all others who helped - I will go through and thank you others too,
Point is now - once I have jelly bean can I get root access easily -without installing another custom rom - ahh well tomorrows problem

[Q] Help with update to jb.

I need help to update my phone, I bought this phone from a friend, the phone now has unlocked bootloader. CM10 installed, what steps should I take to upgrade to jb? - also has twrp recovery installed.
Thank you in advance.
--I have the RSD Lite v6.1.4 installed and motorola drivers too, and the file asanti_c_sprint-user-4.1.2-9.8.2Q-122_XT897_FFW-5-6-release-keys-cid9.xml , Downloade. just need help about what to do now!

I am in the same boat. Long time windows mobile user, and jumped ship when the photon Q came along.
Looking for an step by step idiots guide to backing up what I have and how to flash the new.
Would be willing to send a guy a few paypal bucks for your time to write it up.

RSD LIte is a minimal UI, windows app, not much to think about. Plus, this topic has been discussed and explained all over the web (that includes xda forums)
1) boot device to bootloader (power + camera - then select fastboot/bootloader - additional info on how to select is written on bootloader screen)
2) verifiy your device is recognized in fastboot mode
3) select file to flash
4) press start button
5) wait 'till device boots to android
http://www.youtube.com/watch?v=AHaEHjSzvQQ (different device, same procedure)
That simple (if you can get pc/rsd to recognize the device )

mrvek said:
RSD LIte is a minimal UI, windows app, not much to think about. Plus, this topic has been discussed and explained all over the web (that includes xda forums)
1) boot device to bootloader (power + camera - then select fastboot/bootloader - additional info on how to select is written on bootloader screen)
2) verifiy your device is recognized in fastboot mode
3) select file to flash
4) press start button
5) wait 'till device boots to android
http://www.youtube.com/watch?v=AHaEHjSzvQQ (different device, same procedure)
That simple (if you can get pc/rsd to recognize the device )
Click to expand...
Click to collapse
i follow all the steps but i get stuck on, flashing NON-HLOS.bin" partition="modem, It fails right there. any ideas ? thanks
* I need to remove any other line? I have removed the 2 lines required.
never mind!
VICTORY running rooted jelly bean with TWRP recovery!
I think now I learned about motorola phones It is very easy but takes a while, when you know nothing lol. I've always been on the HTC phones.
( SOLVED )

[Q] Galaxy SL i9003 Stuck in boot screen..

My big bro tried to root Galaxy SL i9003, i don't know which rooting application/software he has used, but when handset restarted after rooting completion it's stuck at screen showing "SAMSUNG Galaxy SL i9003" boot screen...
Now what i do, some of my friend told me that I have to flash mobile with its original ROM with proper version..
Where should i get original ROM of my mobile and how can i know firmware version because i am not able to boot my handset to *#1234#...
PLz HELP!!!!!

amoghs said:
My big bro tried to root Galaxy SL i9003, i don't know which rooting application/software he has used, but when handset restarted after rooting completion it's stuck at screen showing "SAMSUNG Galaxy SL i9003" boot screen...
Now what i do, some of my friend told me that I have to flash mobile with its original ROM with proper version..
Where should i get original ROM of my mobile and how can i know firmware version because i am not able to boot my handset to *#1234#...
PLz HELP!!!!!
Click to expand...
Click to collapse
just do a clean flash of gingerbread DDLF2 2.3.6 using ODIN. your problem will get solved. and always read a plenty of articles before doing such tasks..

File Selection in Odin
maxs8007 said:
just do a clean flash of gingerbread DDLF2 2.3.6 using ODIN. your problem will get solved. and always read a plenty of articles before doing such tasks..
Click to expand...
Click to collapse
Hey maxs, Thank you For your reply...as you said i have downloaded File I9003DDLF2_I9003ODDLF2_INU.zip from http://forum.xda-developers.com/showthread.php?t=1004647 and extracted to some location on machine but this zip contains only two files first one is I9003DDLF2_I9003ODDLF2_I9003DDLE1_HOME.tar.md5 and another on is SS_DL.dll.
I m using Odin v3.07 in that where i supposed to select "I9003DDLF2_I9003ODDLF2_I9003DDLE1_HOME.tar.md5" this file at bootloader/PDA/Phone/CSC..
It will be very helpful if give steps of flashing.

Still Phone is stucked at Boot Screen
amoghs said:
I m using Odin v3.07 in that where i supposed to select "I9003DDLF2_I9003ODDLF2_I9003DDLE1_HOME.tar.md5" this file at bootloader/PDA/Phone/CSC..
Click to expand...
Click to collapse
I selected "I9003DDLF2_I9003ODDLF2_I9003DDLE1_HOME.tar.md5" file in PDA and only Auto Reboot and F.Reset Time is checked and started downloading all goes OK and Pass is showed.
But Still mobile is stucked in boot screen Plz HELP!!!

Greetings;
Have you solved your problem?
If not, tell me what Android version are you running on your device?
i.e: Gingerbread; Ice Cream Sandwich; Jelly Bean or KitKat.
Assuming you are running stock firmware i believe that either your brother flashed a wrong CF-Root for your device or used an application that could not root your device properly.
Either ways don't worry since your device can enter both Download and Recovery modes, it means that you can debug it.
[Rooting]
The best way to root this device is by flashing CF-Root file.
By flashing this file (CF-Root) you will be installing:
- ClockWork Mod Recovery
- Script that will root (automatically) your device.
- ext4 application. (do some research to know what ext4 is and how it os often used)
Small note: Since you will be rooted you will be able to overclock or underclock your device as well increase your device performance and battery duration.
Just PM me or do some research if you need some info regarding these configuration and settings.
[Fixing your issue]
Download Universal CF-Root here:
http://forum.xda-developers.com/showthread.php?t=1351056
Read the instructions before proceeding.
Now boot your device under Download Mode.
To do so:
Unplug USB Cable, Power Off your device and press the following key combination:
Vol.Down + Menu/Home Button + Power Button.
Release when the device enters download mode.
Now open Odin.
Under [PDA] load the CF Root File you've downloaded.
(Do NOT change any options inside odin if you dont know what they are for. Or you may get your device useless).
Put down your device so movement is done into the USB Cable (just to prevent bad flashing when you have low quality USB Cable).
Press Start and let the operation to complete.
Odin will display a message saying: "Pass" highlighted with Green.
Check if your device restarts (it may not restart yet)
If your device boots properly backup your data and follow the next step. If it doesnt boot properly follow to the next step.
Voot your device into recovery mode.
To do so: Power off your device and make sure it is not charging or connected to USB cable.
Then press and hold the following key combination:
Vol. Up + Menu/Home Button + Power Button.
Release after the Boot Logo is shown and you will enter recovery mode.
Now you will perform a Factory Reset.
Inside CWM select by the following order:
- Wipe Dalvik Cache
- Clean Cache
- Factory Reset
Note that Dalvik Cache is not shown at the main menu.
I dont remember the location exactly but if im not mistaken you can find it under "Advanced".
After you perform these 3 options the device shall reboot properly.
(it may take a little bit longer this time. Just be patient).
Since i dont know what was done to your device, there is still a chance that your device wont boot.
Either ways please let me / us (at XDA) know if it worked for you.
It is important (at least for me as a quality standard) that you are able to repair your device.
Best Regards
Please press thank button if this helped you. Since this will keep me motivated to continue helping.
Sent from my GT-I9003 using XDA Free mobile app

Any further help
rgxHost said:
Greetings;
Have you solved your problem?
If not, tell me what Android version are you running on your device?
i.e: Gingerbread; Ice Cream Sandwich; Jelly Bean or KitKat.
Assuming you are running stock firmware i believe that either your brother flashed a wrong CF-Root for your device or used an application that could not root your device properly.
Either ways don't worry since your device can enter both Download and Recovery modes, it means that you can debug it.
[Rooting]
The best way to root this device is by flashing CF-Root file.
By flashing this file (CF-Root) you will be installing:
- ClockWork Mod Recovery
- Script that will root (automatically) your device.
- ext4 application. (do some research to know what ext4 is and how it os often used)
Small note: Since you will be rooted you will be able to overclock or underclock your device as well increase your device performance and battery duration.
Just PM me or do some research if you need some info regarding these configuration and settings.
[Fixing your issue]
Download Universal CF-Root here:
http://forum.xda-developers.com/showthread.php?t=1351056
Read the instructions before proceeding.
Now boot your device under Download Mode.
To do so:
Unplug USB Cable, Power Off your device and press the following key combination:
Vol.Down + Menu/Home Button + Power Button.
Release when the device enters download mode.
Now open Odin.
Under [PDA] load the CF Root File you've downloaded.
(Do NOT change any options inside odin if you dont know what they are for. Or you may get your device useless).
Put down your device so movement is done into the USB Cable (just to prevent bad flashing when you have low quality USB Cable).
Press Start and let the operation to complete.
Odin will display a message saying: "Pass" highlighted with Green.
Check if your device restarts (it may not restart yet)
If your device boots properly backup your data and follow the next step. If it doesnt boot properly follow to the next step.
Voot your device into recovery mode.
To do so: Power off your device and make sure it is not charging or connected to USB cable.
Then press and hold the following key combination:
Vol. Up + Menu/Home Button + Power Button.
Release after the Boot Logo is shown and you will enter recovery mode.
Now you will perform a Factory Reset.
Inside CWM select by the following order:
- Wipe Dalvik Cache
- Clean Cache
- Factory Reset
Note that Dalvik Cache is not shown at the main menu.
I dont remember the location exactly but if im not mistaken you can find it under "Advanced".
After you perform these 3 options the device shall reboot properly.
(it may take a little bit longer this time. Just be patient).
Since i dont know what was done to your device, there is still a chance that your device wont boot.
Either ways please let me / us (at XDA) know if it worked for you.
It is important (at least for me as a quality standard) that you are able to repair your device.
Best Regards
Please press thank button if this helped you. Since this will keep me motivated to continue helping.
Sent from my GT-I9003 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks for your reply. Frankly speaking I don't remember which Android version I was using may be Gingerbread (Is this important)
I downloaded "bagaria-09.GT-I9003_PDA.tar" from the link given by you and following procedure that you have mentioned. After odin says "Pass" I switched off my mobile and started in Recover mode it took around 15-20 mins to show recovery option. after this performed
- Wipe Dalvik Cache
- Clean Cache
- Factory Reset
and then Reboot. As you said phone is stucked on boot image for more than 15 mins then an loop on "SAMSUNG" logo after more 15 mins phone is showing "kernel panic upload mode"
Can you help me further?

amoghs said:
Thanks for your reply. Frankly speaking I don't remember which Android version I was using may be Gingerbread (Is this important)
I downloaded "bagaria-09.GT-I9003_PDA.tar" from the link given by you and following procedure that you have mentioned. After odin says "Pass" I switched off my mobile and started in Recover mode it took around 15-20 mins to show recovery option. after this performed
- Wipe Dalvik Cache
- Clean Cache
- Factory Reset
and then Reboot. As you said phone is stucked on boot image for more than 15 mins then an loop on "SAMSUNG" logo after more 15 mins phone is showing "kernel panic upload mode"
Can you help me further?
Click to expand...
Click to collapse
Hello amoghs;
Again sorry for answering after so long; I'm not so often at XDA Lately.
Yes.
1st: Try Remove the Battery, then Put it Back and Try Again.
If this doens't Work:
1) Turn your Device Off and Press:
Vol. UP + Home Button + Power (To Enter CWM / Your Recovery Mode)
2) Select: "Factory Reset"
Let me know how it worked for you.
Note:
- After Flashing a ROM it is Normal that your Device Takes a little Longer to Boot on the "1st" time.
- Phone Stuck on Boot Logo and Looping: Boot Issues (Either Requires to Remove and Place Back the Battery; or Re-Flash the ROM or Stock Rom in a Difficult Stage).
Notes:
- After a Flash Perform a Factory Reset (To Clean Up Old Stuff).
- If you Experience: "Kernel Panic":
a) Remove Battery and Place it Back - (Works on Most Cases)
b) Flash your ROM again and DO NOT Instal Custom Kernel (May be Wrong Kernel or Bad/Incompatible Kernel Programming)
c) Phone Restarts by Himself: Reflash ROM, Try MinFreeManager or Similar APK (Application). Try "Optimal" Settings. (I dont recall the Presets names - But you can Safely test them - Even if device gets stuck. You can always revert to previous state).
d) Any Hard-to-Solve Issues: Just do a "Clean Flash" of STOCK Gingerbread (Check Sammobile Website - Invalid Download Links Just send email to Support Requesting the File)
or Flash "DDLF2 2.3.6 (Also Gingerbread). But always try Stock 1st to remove most issues, and only then Flash your Desired ROM.
Also if you haven't fixed the Boot Issue already: Do note that you can recover your device Boot.
NOT Dead Yet!
Please do let me know if you solved your Boot problem.
Best Regards;
Richard

Only ODIN available to me!!

Hi folks, I’m not finding the CORRECT info on what I need to reset my phone. The following is what I have gleaned (& used) from the web sources etc.
Phone details: S6 SM-G920W8, was rooted and running Oreo quite happily (aside from telephony)
Was changing, using a TWRP BU to a Nougat TWRP BU ROM something went wrong!!!
Only have access to Odin: (Vol -/Home/Power buttons
Not able to use: Vol+/Home/Power buttons response
Used Odin to install the following file, G920W8VLS6DRC1_G920W8OYA6DRC1_G920W8VLS6DRC1_HOME.tar.md5. It installs giving off the following: Pass in Odin. Phone then Reboots after install to “System Update” then “Erasing”, then Samsung Logo then "Android is starting up". After this it just loops between Logo & Android Starting.
The other file, G920W8VLU5DQD4_G920W8OYA5DQD4_G920W8VLU5DQD4_HOME.tar.md5 (just checks the MD5,hit start then “Fails”
Using Odin 3.13.1 & Samsung Drivers are installed.
Anyone point me as to what I’m doing wrong please??
The 2 files used are:
G920W8VLU5DQD4_G920W8OYA5DQD4_G920W8VLU5DQD4_HOME.tar.md5
G920W8VLS6DRC1_G920W8OYA6DRC1_G920W8VLS6DRC1_HOME.tar.md5

C'mon guys! Someone must have some advice/help with all the expertise on this site. If the post doesn't make sense, please tell me & I'll try to re-phrase it. All I want to do is to get it up & running again in some shape or other. I have a pile of TWRP backups but no way to install them, so, I have to use Odin for something (as in the 2 .img files I referred to).
PLEASE help me!

gpreen said:
Hi folks, I’m not finding the CORRECT info on what I need to reset my phone. The following is what I have gleaned (& used) from the web sources etc.
Phone details: S6 SM-G920W8, was rooted and running Oreo quite happily (aside from telephony)
Was changing, using a TWRP BU to a Nougat TWRP BU ROM something went wrong!!!
Only have access to Odin: (Vol -/Home/Power buttons
Not able to use: Vol+/Home/Power buttons response
Used Odin to install the following file, G920W8VLS6DRC1_G920W8OYA6DRC1_G920W8VLS6DRC1_HOME.tar.md5. It installs giving off the following: Pass in Odin. Phone then Reboots after install to “System Update” then “Erasing”, then Samsung Logo then "Android is starting up". After this it just loops between Logo & Android Starting.
The other file, G920W8VLU5DQD4_G920W8OYA5DQD4_G920W8VLU5DQD4_HOME.tar.md5 (just checks the MD5,hit start then “Fails”
Using Odin 3.13.1 & Samsung Drivers are installed.
Anyone point me as to what I’m doing wrong please??
The 2 files used are:
G920W8VLU5DQD4_G920W8OYA5DQD4_G920W8VLU5DQD4_HOME.tar.md5
G920W8VLS6DRC1_G920W8OYA6DRC1_G920W8VLS6DRC1_HOME.tar.md5
Click to expand...
Click to collapse
The First File (G920W8VLS6DRC1) it flashes ok because the bootloader on your phone is "6" (Thats the fifth number in that file name) the second it fails because the Bootloader is version 6 so is only accepting version "6" and not "5" (G920W8VLU5DQD4).
To fix your problem turn off your phone pressing Vol- + Power. Keep pressing Vol+ + Home + Power (the three at the same time). its going to boot on recovery. its going to appear an Android with an X and under it "No Command (keep calm this is normal). let it there without touching anything until the recovery appears, then wipe Data+Cache and reboot it should be fixed by now.

Many, Many Thanks Razor001_. Worked like a charm once I let the Android "No Command" sit a few seconds. If only I had left it alone and been more patient with it! You truly saved me (Well my old phone anyway!).
Thanks again for your help and input.
As an aside, would I be correct that when it first went wrong and went into the Factory Reset mode, would it have installed the last version of my rooted ROM?? Please say "no" and don't make me cry with a "yes"!

Root newbie

Hello,
Please help me. My samsung a8 updated to android 9 and the call recording is disabled. I need to root the phone, but help me please in the following questions:
1. Do i need custom rom?
2. Do i need custom kernel?
3. Will the android self update as now?
So what is the most importnt steps just to root the device?
In my whole life i paid for one software (callrecorder) which is not working now.

Unfortuently there is no clear tutorial to root this phone but you car read here: [GUIDE][17.06.2019] RMM/KG bypass - Root/Install TWRP on Exynos Samsung after 2018

Snypie said:
Hello,
Please help me. My samsung a8 updated to android 9 and the call recording is disabled. I need to root the phone, but help me please in the following questions:
1. Do i need custom rom?
2. Do i need custom kernel?
3. Will the android self update as now?
So what is the most importnt steps just to root the device?
In my whole life i paid for one software (callrecorder) which is not working now.
Click to expand...
Click to collapse
1. Do i need custom rom?
no
2. Do i need custom kernel?
no
3. Will the android self update as now?
if you flashed TWRP, no

1. Do i need custom rom? No
2. Do i need custom kernel? No
3. Will the android self update as now? depend on your settings
1-to root it the first thing is to have OEM Unlock available and enabled in Dev Options
if not keep the device fully on and with data on dont restart, power off or reset for at least 7 days continuously (or a bit more) and you should have it
if it's not shown dot bother with the rest
2-to have Dev Menu available go to settings >> about phone >> software information >> on build number tape multiple times 10 times i guess, you will have a pop up confirmation
once back at settings menu you will find a new choice at the very bottom "Develper Options"
3-next step with to plug ur phone with PC with usb cable
after installing SAMSUNG DRIVERS & ODIN and downloading TWRP (custom recovery)
in ODIN 2nd tab, untick "AUTO REBOOT" VERY VERY IMPORTANT
chose the TWRP file using AP button/option in ODIN
put your phone in download MOD power off completely >> power back on while holding vol+ and vol- at the same time
flash the file using ODIN to your phone
4- now here is the tricky part
after fklashing TWRP if you reboot normaly you will be locked again and you wont have that OEM Unlock option i talked about and you will be stuck
so, after flashing TWRP, press vol- + power button to reboot the phone
AT THE VERY PRECISE MOMENT WHEN PHONE TURN OFF BEFORE POWERING BACK ON WHEN IT BLINK
RELEAS POWER BUTTON AND VOL+ and PRESS POWER BUTTON + VOL+ AGAIN VERY VERY QUICKLY
if successful you should boot into TWRP directly
5-once you are in TWRP wipe everything then format the device (ALL DATA WILL BE LOST)
of course you need to have the needed files already copied in the SD CARD
from twrp after the wipe and formatiing
go to install and flash in that order RMM_Bypass_v3_corsicanu or RMM-State_Bypass_Mesa_v2
then no-verity-opt-encrypt-6.0
then at the end flash Magisk-v19.3
once its done reboot the phone normally, you will have your phone working as normal
once you are in, install Magisk APK MagiskManager-v7.3.2
reboot again
and voilaaa, you should have root and everything shoul be functional for you
allthow of course I will not be responsible for any kind of software or hardware damage, and certainly not ressponsible for any data loss
as it is completely you responsibility
I would like to attach all the files mentioned above, to help better but dnt sems to find how
so you will have to download and gather them from previous posts

Thank you very much, but i have a question. You wrote this:
"4- now here is the tricky part
after fklashing TWRP if you reboot normaly you will be locked again and you wont have that OEM Unlock option i talked about and you will be stuck
so"
I this will happen what csn i do?
The most afraiding thing is to me about rooting if i get a brick.

Snypie said:
Thank you very much, but i have a question. You wrote this:
"4- now here is the tricky part
after fklashing TWRP if you reboot normaly you will be locked again and you wont have that OEM Unlock option i talked about and you will be stuck
so"
I this will happen what csn i do?
The most afraiding thing is to me about rooting if i get a brick.
Click to expand...
Click to collapse
its virtually impossible to brick samsung devices these days. Well, perma-brick that is. I have spent entire evenings after work bricking phones just so i could figure out what caused the brick and then fix it. the worst thing that would happen if the FRP lock gets enabled again is that youd have to go re-disable it.
i guess i didnt really explain that clearly after re-reading it. So, when he says "stuck" he means with TWRP installed and no method of rooting. The phone will boot normally in the situation described in point #4