Database Info

[Q] Q: Can not flash any roms on 4.0.4

I rooted my friends tablet gt-p5113 with 4.0.4. I used a different work around method to get the root to stick. I got clock work on but I can't seem to flash any roms on his tablet. I tried using 3 different roms already and I keep getting the same message with Andy on his back and his front door open with a red triangle saying can not open package or some thing along those lines. Any ideas?

I think flash stock firmware from for example www.samfirmware.com then begin again from the beginning !!!
When use a root file next time via odin untick auto reboot then reboot manual vol up+power then if question as fix recovery say yes
Sent from my GT-I9300 using xda app-developers app

Mohamedselim said:
I think flash stock firmware from for example www.samfirmware.com then begin again from the beginning !!!
When use a root file next time via odin untick auto reboot then reboot manual vol up+power then if question as fix recovery say yes
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
I'm kind of at loss. Would that mean that I would have to down grade to the 4.0.3. firmware?
The Tablet is already rooted. Using the method that you listed and using the latest clockwork mod file.

So may be try flashing another version of cwm as 6.0.1.0 or 6.0.1.2 or so via odin for example and make sure you are flashing right firmwares for your device specific model number
Make sure you have a proper root via app like root check basic and install supersu from market
Put the firmware in both internal and external sd and try flashing from both, may be one of them will work
Sent from my GT-I9300 using xda app-developers app

I did install su. That's how I know I rooted it right. I'll try reflashing an updated firmware. Thanks for the help
Sent from my SPH-L710 using xda app-developers app

Providing more info can get you better results, like rom /link, cwm version, procedures, this way others can help you diagnose your problem. A screen shot of"about tablet" is also very helpful.
Pp.
Sent from my ginger infused Mayan calculator.

Have you try to flash it using heimdall http://forum.xda-developers.com/showthread.php?t=1892735

How to root and unroot tab2 7" p3100 (may work on other models)

To remove Root:
This Root Remover has been tested with the Samsung Galaxy Tab 2 7" P3100 (tested on jellybean)
REQUIREMENT: A rooted Tab 2.
•After you download this file, move it the root of your external SD card( /mnt/extSdCard ). This is the micro sdcard you insert in tablet slot. Your /mnt/sdcard folder is internal memory (not recognized in CWM recovery).
•Reboot into CWM (recovery) using Quick Boot app or
•Power OFF your tablet, disconnect from computer and restart in recovery (CWM) by pushing and holding POWER & Volume DOWN/LEFT buttons at same time. When Samsung Tab 2 logo appears, you can release power button but continue holding volume button for a few more seconds. Note: If you've done this on other Samsung devices, you will notice that it takes longer before blue CWM v5.5.0.4 text appears ... just be patient.
•Once you are in recovery, use volume button (UP/DOWN/LEFT OR RIGHT) to move around and POWER button to select an option.
Select install zip from sdcard. Choose Root_Remover file you already copied to root of sdcard.
When unrooting is finished, choose reboot system now from CWM menu.
NOTE-By downloading and using this file you understand and agree that you bear all responsibility for the use and anything it may do to your tablet.
DOWNLOAD-
Root_Remover.zip (h--p://www.mediafire.com/?ty54o6lah25w41d)
Replace (--) with tt.
For Root (tested on jellybean):
Use chainfire root its d best i have it.
U can google it or find it on xda search (instructions are provided there).
Dont use the above method to remove the chainfire root as it can be easily removed from its modified superuser application but it works as any other root and is superb!
Enjoy,
Kunal
Dont forget to hit the thanks button!!
Sent from my GT-P3100 using xda app-developers app

thnx man
Thnx kunal........

Hi Kunal,
I have followed your instructions but can you please explain what you mean by
"Dont use the above method to remove the chainfire root as it can be easily removed from its modified superuser application" ?
Thanks.

micro88 said:
Hi Kunal,
I have followed your instructions but can you please explain what you mean by
"Dont use the above method to remove the chainfire root as it can be easily removed from its modified superuser application" ?
Thanks.
Click to expand...
Click to collapse
Yeah brother sure,
It means that do not use the unrooting method which i have given you above to remove the chainfire autoroot (developed by chainfire-a.k.a {cf autoroot}). If you have a chainfire autoroot open its superuser application and there u will see an option of removing the root completely. Try it i personally recommend cf autoroot. Only the cf autoroot has the option to remove the root itself coz its superuser app is modified.
Gud luck
Sent from my GT-P3100 using xda app-developers app

Hi Kunal
Hi Kunal.......
I had unrooted my Tab 2 P3100 (v4.1.1 - India) yesterday. I had also used triangle away as u adviced to set counter to zero. After unroot I wipe data/factory reset the Tab. After that then i had done factory reset from settings/backup and restore option in Tab.
But when I tried to update my tab using OTA by going under Software Update option in Settings it displays following message:
YOUR DEVICE HAS BEEN MODIFIED. SOFTWARE UPDATES ARE NOT AVAILABLE.
Then I checked for Device status it shows Device Status Custom. How to get rid of all this.
Plz help.

Hey amit,
U dnt have to use triangle away after unrooting its only for after u root ur tab. Btw dnt update to 4.1.2 it just suckss!! It only adds smart stay to ur tab which is NOT working due to a bug in this update i also rolled back to 4.1.1 after i did this useless update. And if u want to update then go to recovery menu (power off then power button + volume up) and from there do factory reset and wipe all cache and data dalvik cache also (it will delete evrythin on your tab)-DO THIS ONLY AFTER UNROOT.
And if the above one does not work then format, wipe cache and dalvik also from recovery menu and then use ota update.
If ota doesnt work then use kies-only if ur tab is unrooted.
Ps sorry for late reply
Sent from my GT-P3100 using xda app-developers app

Galaxy tab 2 p3100 unroot
I uninstalled the chainfire super user app you said above to unroot my tab .but I cant get the official Samsung OTA update.When I check for the software updates in about device in settings it is saying your device has been modified. you cant get updates . even though I have unrooted my device. Now my dwvice is running 4.1.2 I want to update to 4.2.2 . I am using official Samsung rom only .I didnt changed rom. plz solve my problem. Samsung has rolled out official 4.2.2 update for galaxy tab 2 p3100 on 1st august . now I cant update

sukkukikku said:
I uninstalled the chainfire super user app you said above to unroot my tab .but I cant get the official Samsung OTA update.When I check for the software updates in about device in settings it is saying your device has been modified. you cant get updates . even though I have unrooted my device. Now my dwvice is running 4.1.2 I want to update to 4.2.2 . I am using official Samsung rom only .I didnt changed rom. plz solve my problem. Samsung has rolled out official 4.2.2 update for galaxy tab 2 p3100 on 1st august . now I cant update
Click to expand...
Click to collapse
Follow this:-
Unroot ur tab by using permanent unroot from the chainfire su app.
Now factory reset ur tab and it should be up.:thumbup:
Sent from my GT-P3100 using xda app-developers app

I want to root galaxy grand duos i9082. I tried that by odin 3.07, selecting cwm recovery mod chotu.tar. as PDA and it just shows reset in the port box in odin. After that I tried to install super su app 1.25 by placing it in root of external sd card and in download mode. But it says verification failed. And the download mode is not showing as it shown in youtube videos.
Sent from my GT-P3100 using xda premium

sukkukikku said:
I want to root galaxy grand duos i9082. I tried that by odin 3.07, selecting cwm recovery mod chotu.tar. as PDA and it just shows reset in the port box in odin. After that I tried to install super su app 1.25 by placing it in root of external sd card and in download mode. But it says verification failed. And the download mode is not showing as it shown in youtube videos.
Sent from my GT-P3100 using xda premium
Click to expand...
Click to collapse
Go to chainfire's website and there see cf autoroot section. From that page you can find ur device and follow the same steps as in this thread. And u have posted ur question in the wrong device section but still i will help u.
Sent from my GT-P3100 using xda app-developers app

I have updated to 4.2.2 and also rooted. But now my tab is not connecting to any pc having windows vista or windows 7 or windows 8 or linux. I have tried by unrooting and formatting my device but in vain. Plz help me I am unable to connect my device to pc . It says device has been malfunctioned and windows does not recognise. I uninstalled that usb drive, rebooted windows and tried everything. All this happened after updating my tab to 4.2.2
Sent from my GT-P3100 using xda app-developers app

Tab 2
Hi, i just tried u r method but stuck.In the recovery mode i got following options instead which u hav posted;-
Apply update from SD card
Wipe data/Factory reset
Wipe cache partition
Apply update from cache
plz tell wat to do

What have you done
Sent from my GT-P3100 using xda app-developers app

sukkukikku said:
What have you done
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
I have done nothing just 1 nce rooted it

I can't understand what you are saying. What do you want, what you did, what happened. Say clearly .
Sent from my GT-P3100 using xda app-developers app
---------- Post added at 01:19 PM ---------- Previous post was at 01:15 PM ----------
Just reflash the room again ,
Sent from my GT-P3100 using xda app-developers app
---------- Post added at 01:20 PM ---------- Previous post was at 01:19 PM ----------
Just reflash the ROM
Sent from my GT-P3100 using xda app-developers app

I was trying to install Ubuntu Touch on my Galaxy Tab 2 tablet. But while recover mode, but the options I got were not same options as mentioned in the instructions. I got the following options:
Reboot now
Apply update from SD card
Wipe data/factory reset
Wipe cache partition
Apply update from cache
What should I do now?

You should have cyanogen 10.1 nightly and in cwm go to apply update from zip. and do the procedure . you can see video in you tube
Sent from my GT-P3100 using xda app-developers app

Satkalra said:
I was trying to install Ubuntu Touch on my Galaxy Tab 2 tablet. But while recover mode, but the options I got were not same options as mentioned in the instructions. I got the following options:
Reboot now
Apply update from SD card
Wipe data/factory reset
Wipe cache partition
Apply update from cache
What should I do now?
Click to expand...
Click to collapse
This post is for rooting not installing ubuntu... :/
Sent from my GT-P3100 using xda app-developers app

Problem...
Hi Kunal
I have a problem while installing the file(Root_Remover.zip).It shows "E:signature verification failed".
Please help me

[Q] Bootloop after StockRom flashing

Heyo everyone
I'm coming from cm10.1 and now i wanted to go back to stock.
so I've downloaded I9105PXXAMC2 from samfirmware.com
unfortunately after flashing via odin i got bootloop
i've tried to wipe from android recovery but then there's only a red triangle
is there any solution?
it's almost impossible for me to download another firmware because my internet speed sucks so massive

Gh3ttoKiLL4 said:
Heyo everyone
I'm coming from cm10.1 and now i wanted to go back to stock.
so I've downloaded I9105PXXAMC2 from samfirmware.com
unfortunately after flashing via odin i got bootloop
i've tried to wipe from android recovery but then there's only a red triangle
is there any solution?
it's almost impossible for me to download another firmware because my internet speed sucks so massive
Click to expand...
Click to collapse
Install CWM with odin and wipe your data cache and dalvik cache from there then it will boot up fine

safariking said:
Install CWM with odin and wipe your data cache and dalvik cache from there then it will boot up fine
Click to expand...
Click to collapse
I think installing clockworkmod for wiping isn't an option. The op flashed stock Rom probably because he wants his warranty back
Installing clockworkmod again would void it again. If the stock Rom you downloaded is the one you had before rooting, then try flashing it again. If it's not, then download your originally out of box stock Rom and flash it with Odin.
Like...the same baseband version as the one you had before any modification of your system
Sent from my GT-I9105P using xda premium

Brian_SGW_CM9 said:
I think installing clockworkmod for wiping isn't an option. The op flashed stock Rom probably because he wants his warranty back
Installing clockworkmod again would void it again. If the stock Rom you downloaded is the one you had before rooting, then try flashing it again. If it's not, then download your originally out of box stock Rom and flash it with Odin.
Like...the same baseband version as the one you had before any modification of your system
Sent from my GT-I9105P using xda premium
Click to expand...
Click to collapse
You need to wipe it otherwise it won't boot up and if you had cm10.1 you must wipe your internal sd card to
if you install cyanogenmod and you odin back to stock rom the stock rom will simply not boot if no wipe was done!!!

safariking said:
You need to wipe it otherwise it won't boot up and if you had cm10.1 you must wipe your internal sd card to
if you install cyanogenmod and you odin back to stock rom the stock rom will simply not boot if no wipe was done!!!
Click to expand...
Click to collapse
I thought flashing through Odin already wipes..
So if I want to Odin back. With the clockworkmod, I first wipe, then flash stock. Right?
Sent from my GT-I9105P using xda premium

No
odin back first and after that install cwm and wipe!
Sent from my awesome S2 Plus

safariking said:
No
odin back first and after that install cwm and wipe!
Sent from my awesome S2 Plus
Click to expand...
Click to collapse
Can You please be more specific? I'm trying to install stock rom, and it's intering loop on boot. Trying to instal CWM via Odin - no success.

Did you wipe before flashing via Odin?
Sent from my GT-I9105P using XDA Premium 4 mobile app

Brian_SGW_CM9 said:
Did you wipe before flashing via Odin?
Sent from my GT-I9105P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
That's a question too... How to do wipe, if all I have is official bootloader, with debugging OFF, and loop / stuck on SUMSUNG logo?
(I don't care of any kind of warranty, just want to boot up this brick with ANY ROM!)

borsiknet said:
That's a question too... How to do wipe, if all I have is official bootloader, with debugging OFF, and loop / stuck on SUMSUNG logo?
(I don't care of any kind of warranty, just want to boot up this brick with ANY ROM!)
Click to expand...
Click to collapse
Can you reach download mode?
Sent from my GT-I9105P using XDA Premium 4 mobile app

Brian_SGW_CM9 said:
Can you reach download mode?
Sent from my GT-I9105P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes, I'm trying all original firmware from sammobile, that appropriate to this model. Sometimes it geting custom BIN, and bootloader taking it back to samsung official.

borsiknet said:
Yes, I'm trying all original firmware from sammobile, that appropriate to this model. Sometimes it geting custom BIN, and bootloader taking it back to samsung official.
Click to expand...
Click to collapse
Yep, that's the only way
Sent from my GT-I9105P using XDA Premium 4 mobile app

Brian_SGW_CM9 said:
Yep, that's the only way
Sent from my GT-I9105P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Maybe any way to know origin of the phone by S/N to which country he belong?

borsiknet said:
Maybe any way to know origin of the phone by S/N to which country he belong?
Click to expand...
Click to collapse
Find your country's name on sammobile. I mean of the firmware page of sammobile
Sent from my GT-I9105P using XDA Premium 4 mobile app

Brian_SGW_CM9 said:
Find your country's name on sammobile. I mean of the firmware page of sammobile
Sent from my GT-I9105P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
There are no my contry ROM. I stucked with bootloops and debug options OFF. What to do???! It's driving me crazy...

After almost two weeks of seeking for solutions all over internet, the problem was solved. First of all there are no way to root without debuging off via odin o any other tool. All what you have, is just to look for your original firmware of the phone, and it supposed to be four file package.
Looks like:
FULL_CSC_I9105PXXAMC2_I9105POXAAMC1_I9105PXXAMC1_DBT.tar.md5
FULL_MODEM_I9105PXXAMC2_I9105POXAAMC1_I9105PXXAMC1_DBT.tar.md5
FULL_PDA_I9105PXXAMC2_I9105POXAAMC1_I9105PXXAMC1_DBT.tar.md5
s2ve.pit
In this case it was german phone so files end with DBT.
CSC - as CSC
MODEM - as CP or PHONE
PDA - as AP or PDA
and pit file for re-partition.
The name of whole package is GT-I9105P-DBT-I9105PXXAMC2_Service-Firmware.zip
For those asking for delete dalvik/cache/factory reset, the solution is - RE-PARTITION!
I used also option Nand Erase All, just to be sure I delete everything.
All other operations goes as usual in Odin.
I can't post links here, bat me mercy on those looking for solution for days and weeks long.
So here is link that I found on some forum that leading to (thanx Goshhhh!!!) to Google docs, so download was just 5 min. long.
Here is German (DBT) package, and some other usefull links. Use G. translator to understand.
h t t p : / / galaxysclub.ru/obzor-osnovnyh-funkcij-obsuzhdenie-i-reshenie-problem/2111-pomogite-s-i9105-proshivki-dlya-i9105 . html
Just remove spaces, where needed. This is a Russian forum. Respect and thousand thanx to Сергей, author of usefull post with links provided, once again THANX a lot, Sergej!

borsiknet said:
After almost two weeks of seeking for solutions all over internet, the problem was solved. First of all there are no way to root without debuging off via odin o any other tool. All what you have, is just to look for your original firmware of the phone, and it supposed to be four file package.
Looks like:
FULL_CSC_I9105PXXAMC2_I9105POXAAMC1_I9105PXXAMC1_DBT.tar.md5
FULL_MODEM_I9105PXXAMC2_I9105POXAAMC1_I9105PXXAMC1_DBT.tar.md5
FULL_PDA_I9105PXXAMC2_I9105POXAAMC1_I9105PXXAMC1_DBT.tar.md5
s2ve.pit
In this case it was german phone so files end with DBT.
CSC - as CSC
MODEM - as CP or PHONE
PDA - as AP or PDA
and pit file for re-partition.
The name of whole package is GT-I9105P-DBT-I9105PXXAMC2_Service-Firmware.zip
For those asking for delete dalvik/cache/factory reset, the solution is - RE-PARTITION!
I used also option Nand Erase All, just to be sure I delete everything.
All other operations goes as usual in Odin.
I can't post links here, bat me mercy on those looking for solution for days and weeks long.
So here is link that I found on some forum that leading to (thanx Goshhhh!!!) to Google docs, so download was just 5 min. long.
Here is German (DBT) package, and some other usefull links. Use G. translator to understand.
h t t p : / / galaxysclub.ru/obzor-osnovnyh-funkcij-obsuzhdenie-i-reshenie-problem/2111-pomogite-s-i9105-proshivki-dlya-i9105 . html
Just remove spaces, where needed. This is a Russian forum. Respect and thousand thanx to Сергей, author of usefull post with links provided, once again THANX a lot, Sergej!
Click to expand...
Click to collapse
If anyone have problem with bootloop when flash original rom, solution is simple. Just go to recovery. Samsung has stock recovery. Wipe data/factory reset and reboot phone. Thats all . PS to go to recovery turn off phone. Wait 3 seconds. hold home buton, volume up and power buton in same tame.

jaskof1 said:
If anyone have problem with bootloop when flash original rom, solution is simple. Just go to recovery. Samsung has stock recovery. Wipe data/factory reset and reboot phone. Thats all . PS to go to recovery turn off phone. Wait 3 seconds. hold home buton, volume up and power buton in same tame.
Click to expand...
Click to collapse
That was a problem, loops after flashing with Odin.

jaskof1 said:
If anyone have problem with bootloop when flash original rom, solution is simple. Just go to recovery. Samsung has stock recovery. Wipe data/factory reset and reboot phone. Thats all . PS to go to recovery turn off phone. Wait 3 seconds. hold home buton, volume up and power buton in same tame.
Click to expand...
Click to collapse
Well this worked for me just fine

Boot into cwm
Go tot mounts and storage
Format everything (no ext sdcard
Flash firmware with Odin andere cwm would be deleted

[Q] stock recovery samsung galaxy s2 plus?

Hi guys I can not find the stock recovery for my samsung galaxy s2 plus ... have no idea where I can find her?

Same as Cwm .. vol up +home + power

djeagle said:
Same as Cwm .. vol up +home + power
Click to expand...
Click to collapse
He means where to download and flash it back
I think
Sent from my GT-I9105P using xda premium

Brian_SGW_CM9 said:
He means where to download and flash it back
I think
Sent from my GT-I9105P using xda premium
Click to expand...
Click to collapse
Flash the stock firmware ? Don't know if that works... never tryed.

djeagle said:
Flash the stock firmware ? Don't know if that works... never tryed.
Click to expand...
Click to collapse
Yes flashing stock firmware will give you back your stock recovery. And also unroot your phone
Sent from my GT-I9105P using xda premium

Thanks solved with reflash 4.2.2 deoxed

Same problem here. I want to take my SII back to store for warranty, so do I have to replace cwm with stock recovery? I unrooted, factory resetted and used Triangle Away (but it seems like something causes the counter to go back to 1, so I've done it again a few times), so what else should I do to make sure the warranty isn't void?

volderjort said:
Same problem here. I want to take my SII back to store for warranty, so do I have to replace cwm with stock recovery? I unrooted, factory resetted and used Triangle Away (but it seems like something causes the counter to go back to 1, so I've done it again a few times), so what else should I do to make sure the warranty isn't void?
Click to expand...
Click to collapse
flash back stock rom directly after using triangle away or flash the stockrecovery attached to this post http://forum.xda-developers.com/showthread.php?t=2441671

volderjort said:
Same problem here. I want to take my SII back to store for warranty, so do I have to replace cwm with stock recovery? I unrooted, factory resetted and used Triangle Away (but it seems like something causes the counter to go back to 1, so I've done it again a few times), so what else should I do to make sure the warranty isn't void?
Click to expand...
Click to collapse
Flash firmware right after using triangle away.
If you go back to cwm. It goes back to 1 as it can detect your system is modified
When the flashing process is finished, it should reboot. But if you haven't wiped it yet, force reboot it back to stock recovery and wipe. Then reboot.
Congrats, you have your warranty back
Sent from my GT-I9105P using XDA Premium 4 mobile app

Brian_SGW_CM9 said:
Flash firmware right after using triangle away.
If you go back to cwm. It goes back to 1 as it can detect your system is modified
When the flashing process is finished, it should reboot. But if you haven't wiped it yet, force reboot it back to stock recovery and wipe. Then reboot.
Congrats, you have your warranty back
Sent from my GT-I9105P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
He can simppy flash the stockrecovery after using triangle away
I attached it to the cwm thread

How about unroot
Sent from my GT-I9105P using XDA Premium 4 mobile app

[Q] Please Help me GuyzZ... :( i can not update my phone core 8262

I am using galaxy core 8262 and i have already rooted the device and installed CWM( Philz touch )
today i got notification that i have a update, i;ve downloded the update via phone and after restart it just goes to Philz CWM shows some error.
Can any body tell me how to fix this or how to get back to stock Recovery mode.I have stock recovery img.bt i dun know how to use this img.
or u gyz can suggest me if u hav ny other idea!!!

asifemon0 said:
I am using galaxy core 8262 and i have already rooted the device and installed CWM( Philz touch )
today i got notification that i have a update, i;ve downloded the update via phone and after restart it just goes to Philz CWM shows some error.
Can any body tell me how to fix this or how to get back to stock Recovery mode.I have stock recovery img.bt i dun know how to use this img.
or u gyz can suggest me if u hav ny other idea!!!
Click to expand...
Click to collapse
Download the stock 4.1.2 from sammobile.com
And flash it using odin

What kind 9f update bro?

I didnt get the chance to upgrade the phone so i dun know what kinda update is it.
Bt it seems some bug fixs and stability improvements.
Sent from my GT-I8262 using xda app-developers app

Bro is there any short way?
If i flash the stock firmware then i'll hve to root the device again.and rooting this device is such a pain.
Can u upload the stock boot immage.i have lost the original 1. :'(
I wana restore stock boot via nandroid rom manager.and then install the upgrade.
Sent from my GT-I8262 using XDA Free mobile app

asifemon0 said:
Bro is there any short way?
If i flash the stock firmware then i'll hve to root the device again.and rooting this device is such a pain.
Can u upload the stock boot immage.i have lost the original 1. :'(
I wana restore stock boot via nandroid rom manager.and then install the upgrade.
Sent from my GT-I8262 using XDA Free mobile app
Click to expand...
Click to collapse
Wait a minute ...how you will update and ur phone is rooted? ? U cant do that ur phone need to be completely stock
Sent from my GT-I8262 using XDA Free mobile app

asifemon0 said:
I am using galaxy core 8262 and i have already rooted the device and installed CWM( Philz touch )
today i got notification that i have a update, i;ve downloded the update via phone and after restart it just goes to Philz CWM shows some error.
Can any body tell me how to fix this or how to get back to stock Recovery mode.I have stock recovery img.bt i dun know how to use this img.
or u gyz can suggest me if u hav ny other idea!!!
Click to expand...
Click to collapse
as you said you have stock recovery img then just download the flashify app from playstore and flash the stock recovery through flashify app and then just download and install the update.. (updating requires stock recovery)

I just lost that recovery img.
ply some 1 upload if possible

will we have kit kat for this phone?